Search

Published After
Published Before

Search Results

  • Pre- and postharvest technologies to extend the shelf life of Prunus cerasus
    85-89
    Views:
    231

    Fresh tart cherry consumption cannot be increased without the development of an appropriate technology for its elongated storage. This requires the development and optimization of the pre- and postharvest treatments. Currently, we have only limited knowledge about tart cherry (Prunus cerasus L.) postharvest technology, however, related studies on sweet cherry (Prunus avium L.) may be adopted. In this article, we have collected the most important research results in this topic.

  • Spent mushroom compost (SMC) – retrieved added value product closing loop in agricultural production
    185-202
    Views:
    970

    Worldwide edible mushroom production on agro-industrial residues comprises of more than 11 million tons of fresh mushrooms per year. For 1 kg of mushrooms there is 5 kg of spent mushroom compost (SMC). This enormous amount of waste results in disposal problems. However, SMC is a waste product of the mushroom industry, which contains mycelium and high levels of remnant nutrients such as organic substances (N, P, K). The spent mushroom compost is usually intended for utilization, but there are increasing numbers of experiments focusing on its reuse in agricultural and horticultural production. Recently, the increase of the global environmental consciousness and stringent legislation have focused research towards the application of sustainable and circular processes. Innovative and environmentally friendly systems of utilisation of waste streams have increased interest of the scientific community. Circular economy implies that agricultural waste will be the source for retrieving high value-added compounds. The goal of the present work was to carry out a bibliographic review of the different scenarios, regarding the exploitation of this low cost feedstock with huge potential for valorisation.

  • Soil Fertility Management in Westsik’s Crop Rotation Experiment
    34-39
    Views:
    97

    The crop rotation experiment, established by Vilmos Westsik in 1929, is the best known and most remarkable example of continuous production in Hungary. It is still used to study the effects of organic manure treatment, develop models and predict the likely effects of different cropping systems on soil properties and crop yields. Westsik’s crop rotation experiment provides data of immediate value to farmers concerning the applications of fertilisers, green, straw and farmyard manure. The experiment also provides a resource of yield, plant and soil data sets for scientific research into the soil and plant processes which control soil fertility, and into the sustainability of production without environmental deterioration. The maintenance of Westsik’s crop rotation experiment can be used to illustrate the value of long-term field experiments.

  • Examination of the conditions of extreme water balance circumstances (water logging, drought) with environmental information technology tools
    79-86
    Views:
    216

    The Carpathian Basin is characterized by varying hydrological extremes, both in space and time. Hungary's natural endowments are more favourable than average, especially for agricultural production, with 5,3 million hectares of land we have which is suitable for agricultural production. These extreme water management are often occur in the same year and mostly in the same region, which may become more frequent in the future, especially in the lowland regions. The negative impacts of extreme water management was influenced by the land use changes in recent years, which has modified the runoff processes of the affected regions.

    The aim of the study was to research the formation of inland water and drought circumstances in two sample areas the Great Plain (Szolnok-Túri flat and Nyírség) by geoinformatic tools. During the investigation in the first step we determined that areas which are susceptible to inland water and drought, based on the AGROTOPO database. In addition, land-use categories of characteristics of the sample areas are evaluated according to the Corine Land Cover. Furthermore, after defining characteristic of NDVI values between the period of 2003–2013, we evaluated the effect of drought whether can be detected in crop failures in respective areas.

    Based on our results, we concluded that the formation of inland water and drought circumstances can be investigated in a large spatial extension by geoinformatic tools and databases.

  • The impacts of spring basal and side dressing on maize yield
    83-86
    Views:
    181

    The yield potential of maize is very high. According to Tollenaar (1983), maize yield potential is as high as 25 t ha-1 (absolute dry yield) which is the highest among all cereals. In order to fully utilise this high yield potential, proper nutrient replenishment is of chief importance among all agrotechnical factors.

    The aim of research was to examine the effect of nitrogen fertiliser applied as basal and side dressing on maize yield.

    The measurements were performed at the Látókép experiment site (47° 33’ N, 21° 26’ E, 111 m asl) of the Centre for Agricultural Sciences of the University of Debrecen on mid-heavy calcareous chernozem soil with deep humus layer in an established experiment in 2011, 2012 and 2013. The trial design was split-split-plot with two replications.

    Based on the experiment results, it can be established that the nutrient uptake of maize is greatly dependent on the amount of water store in the soil. From the aspect of the development of the maize plant and water supply, the most determinant factor was the distribution of precipitation over the growing season and not the amount precipitation. This is shown by the fact there was only 276 mm precipitation – which was favourably distributed – in 2012 to increase the availability of nutrients and the main average was the highest in this year (14.394 t ha-1).

    Spring basal dressing helped maize development in all three years even on chernozem soil which is well supplied with nutrients. Although the effect of side dressing did not result in any yield increase, it could still contribute to mitigating the stress effects caused by environmental factors. Altogether, nutrient supply adapted to the various development stages of maize can favourably affect the success of maize production.

  • Site and hybrid-specific agrotechnical models in sweet corn production
    105-108
    Views:
    97

    The effect of three agrotechnical factors (sowing time, fertilization, plant density) and two genotypes on the crop yield of sweet corn was examined on chernozem soil in the Hajdúság region in two different crop years. Compared to the 30-year average, the climate was dry and warm in 2009 and humid in 2010. The experiments were conducted at the Látókép Research Site of the University of Debrecen. In the experiments we applied two sowing times (end of April, end of May), six fertilization levels (control, N30+PK, N60+PK, N90+PK, N120+PK, N150+PK) and two crop density levels (45 thousand ha-1, 65 thousand ha-1). The hybrids we used were Jumbo and Enterprise. As regards the requirements of sweet corn production, the crop year of 2009 was dry and warm. The effect of moisture deficiency was more adverse on the crop yields with the second sowing time. On the contrary, the other examined year (2010) was significantly humid; the precipitation was 184 mm above the 30-year average and the temperature was average.
    In the dry and hot crop year, the best yields were obtained with the hybrid Jumbo (25677 kg-1) at 65 thousand ha-1 plant density level on the average of the fertilization levels. The crop yields of Enterprise were also the highest at high plant density level (24444 kg ha-1). With the second sowing time the highest yields were obtained at the higher plant density level (65 thousand ha-1) with both hybrids (Jumbo 18978 kg ha-1, Enterprise 18991 kg ha-1), which confirmed the good adaptation capability of these hybrids at high plant density level. In humid crop year with early sowing time the highest yielding hybrid was Enterprise (at 45 thousand ha-1 crop density level 20757 kg-1), at the same time, Jumbo was best yielding at the higher plant density level (18781 kg-1). With the second sowing time the highest crop yield was obtained with Enterprise again (20628 kg ha-1 at 65 thousand ha-1 plant density level). With this sowing time the average yields of Jumbo, was 18914 kg ha-1 respectively. We found that dry crop year and early sowing time provided the best conditions for sweet corn production; the highest yields were obtained under these circumstances, which might be the results of the outstanding water management of chernozem  soils.

  • The effect of sulphur and nitrogen supply on the growth and nutrient content of spring wheat (Triticum aestivum L.)
    65-70
    Views:
    209
    Sulphur is an essential element for plants. Decreasing sulphur deposition from the air, and the use of more concentrated phosphate fertilizers, which contain no sulphur, has led to reports of sulphur deficiencies for wheat. Sulphur deficiency significantly affects yield and also the quality of wheat. The pot experiment was set up on calcareous chernozem soil at Látókép, Hungary, test plant was spring wheat (Triticum aestivum L). Seven treatments were used where nitrogen and sulphur were supplied as soil fertilizers in increasing rates (NS1, NS2, NS3) and in foliar fertilizer as well (NS1+fol., NS2+fol., NS3+fol.). Plant aboveground biomass production was determined in samples taken in the stages of development BBCH 29-30, 51-59, 61-69, 89. The nitrogen and sulphur content of straw and grain were measured. N/S ratios of grain and straw were calculated. The weights of grain were ranging between 8.6–16.1 g/pot. NS2 and NS2+fol. treatments produced the highest values. Foliar fertilizer had no further effect on grain. Analysing the values of the straw, it was observed that tendencies were similar to values of grain. The NS2 treatment produced the highest weight of straw and the NS3 rate already decreased that amount. The obtained results show the unfavourable effect of excessively high rate applied in NS3 treatment. The supplementary foliar fertilizer had no significant influence on the weight of straw. Both N and S-uptake of plant was very intensive at the stem elongation stage, then the N and S-content of plant continuously decreased in time in all treatments. The N-content of grain ranged between 2.215–2.838%.
    The N-content of grain slightly increased with increasing of nitrogen doses. In the higher doses (NS2, NS3) foliar fertilization slightly increased the nitrogen content of grain, although this effect was not statistically proved. The N-content of straw varied from 0.361 to 0.605%. The growing dose of soil fertilizer also considerably increased the nitrogen content of straw. Foliar fertilization further increased the nitrogen content of straw. The S-content of grain ranged between 0.174–0.266%. The lowest fertilizer dose (NS1) significantly increased the sulphur content of grain. The further increasing fertilizer doses (NS2, NS3) did not cause additional enhance in sulphur content of grain.
    The foliar fertilizer also did not change the sulphur value of plant. The increasing amount of soil fertilizer and the supplementary foliar fertilizer had no effect on the sulphur content of straw. The treatments influenced the N/S ratios of grain and straw. On the basis of experimental results it can be concluded that the examined nitrogen and sulphur containing soil fertilizer had positive effect on the growth and yield of spring wheat grown on the calcareous chernozem soil. The soil fertilizer application enhanced the grain nitrogen and sulphur content. The highest rate of fertilizer (600 kg ha-1) proved to have decreasing effect on the yield. The sulphur and nitrogen containing foliar fertilizer did not have significant effect on the yield parameters but slightly increased the nitrogen content of plant.
  • The importance of millet production in regional production, with special emphasis on climate change
    141-146
    Views:
    153
    Regional production is a traditional production structure developed adjusting to the geographical, climatic, biological and soil conditions in given production regions, a certain territorial specification of agricultural production, and a type of farming that best fits the natural conditions and takes the biological needs of plant and animal species into account as fully as possible. The most probable element of risk in plant production is the changeable, extreme weather. That is the reason why the specific characteristics of the place of production and the characteristics of regional production should be considered to a greater extent. The establishment of the range of varieties appropriate for the place of production is the key issue in regional production. One of our historically grown cereal plants that perfectly fits regional production is millet. Due to its short growing season, favourable reproduction ratio and the fact that it is relatively undemanding, it used to be grown in larger quantities in the middle ages. Its good nutritional values made it an important food item, but over time, as a result of industrialisation and technological progress; it has been eclipsed by other cereal crops. In our country it is mainly used to cook porridge, but it is also used in the form of flour and as a base material in the spirit drinks sector. In the recent decades, millet has been applied only in a small area, mostly as a secondary crop in areas that dried out from drainage water in late spring, or as a replacement of extinct sowings due to its late sowing time. Water will be the most significant factor for the future of agriculture, especially considering climate change.
    My examinations took place in the area of the Institutes for Agricultural Research and Educational Farm of University of Debrecen, in the Research Institute of Nyíregyháza, in a small-plot experiment with four replications in 2016.
  • Element content analyses in the Institute for Food Sciences, Quality Assurance and Microbiology
    203-207
    Views:
    122

    The role of chemical elements to ensure and promote our health is undisputed. Some of them are essential for plants, animals and human, others can cause diseases. The major source of mineral constituents is food, drinking water has a minor contribution to it, so the knowledge of elemental intake through food is crucial and needs continuous monitoring and by this way it promotes the food quality assurance and dietetics.
    With the evolution of spectroscopic methods increasingly lower concentrations could be determined, so the elemental composition of a sample could be more precisely and fully described. Due to the results the gathered knowledge up to the present is supported and new observations can be done helping us to understand such complex systems as biological organisms are.
    The quality of a food is determined by the full process of its production, consequently it starts with agricultural production so elemental-analysis usually cover the whole soil – plant – (animal) – food chain, by this way the „Fork-to-Farm” precept is true in elemental analysis field also.
    The history of elemental analysis in the University of Debrecen, Centre for Agricultural and Applied Economic Sciences, Faculty of Agricultural and Food Sciences and Environmental Management, Institute of Food Processing, Quality Assurance and Microbiology goes back to 1980s when the so called Regional Measurement Central gave the background for research. The continuous deployment resulted in an obtain of an inductively coupled plasma atomic emission spectrometer (ICP-AES) in 1988, which extended the scope of examinations due to its excellent performance characteristics
    compared to flame atom absorption (FAAS) and flame emission spectrometers (FES). The instrumental park retain up to date correlate to the developing analytical techniques due to acquiring a newer ICPAES in 1998 and an inductively coupled plasma mass spectrometer in 2004 – which sensitivity is three order of magnitude better compared to ICP-AES. The Institute supports the work with its own ICP-AES and ICP-MS since 2011. 

  • Greenhouse gas emissions and Europe 2020 strategy
    241-244
    Views:
    62

    Common Agricultural Policy has identified three priority areas for action to protect and enhance rural heritage: (i) the preservation and development of natural farming and traditional agricultural landscapes; (ii) water management and sustainable use and (iii) dealing with climate change. Measures of Rural Development Plan in EU countries promote the development of agricultural practices for preserving the environment and safeguarding the countryside. This is achieved by targeting rural development and promoting environmental friendly, sustainable practices, like agri-environment schemes. Farmers are encouraged to continue playing a positive role in the maintenance of the countryside and the environment. Changes in total emission between 1990
    and 2007 do not show any correlation with the total GHG emission. GHG emission was reduced in Hungary, Slovakia, Lithuania, Czech Republic, Romania, Poland, Estonia and Bulgaria, where GHG efficiency is low.

  • Long-term experiments on chernozem soil in the University of Debrecen
    357-369
    Views:
    225

    The impact of agrotechnical management practices (nutrient and water supply, crop rotation, crop protection, genotype) on the yields of winter wheat and maize and on the soil water and nutrient cycles was studied in long-term experiments set up in 1983 in Eastern Hungary on chernozem soil. The long-term experiments have shown that nitrogen fertilizer rates exceeding the N-optimum of winter wheat resulted in the accumulation of NO3-N in the soil. Winter wheat varieties can be classified into four groups based on their natural nutrient utilization and their fertilizer response. The fertilizer responses of wheat varieties depended on crop year (6.5–8.9 t ha-1 maximum yields in 2011–2015 years) and the genotypes (in 2012 the difference was ~3 t ha-1 among varieties). The optimum N(+PK) doses varied between 30–150 kg ha-1 in different crop years. In maize production fertilization, irrigation and crop rotation have decision role on the yields. The efficiency of fertilization modified by cropyear (in dry 891–1315 kg ha-1, in average 1927–4042 kg ha-1, in rainy cropyear 2051–4473 kg ha-1 yield surpluses of maize, respectively) and crop rotation (in monoculture 1315–4473 kg ha-1, in biculture 924–2727 kg ha-1 and triculture 891–2291 kg ha-1 yield surpluses of maize, respectively). The optimum fertilization could improve the water use efficiency in maize production.

    Our long-term experiments gave important ecological and agronomic information to guide regional development of sustainable cropping systems.

  • The effect of increasing compost rates on the yield and nutrient content of ryegrass (Lolium perenne L.)
    127-134
    Views:
    130

    Satisfaction of the increasing needs of humanity causes large environmental load. To provide a livable environment for future generations we have to satisfy our needs with the use of sustainable management. This is one of the biggest challenges of nowadays.
    The amount of wastes emitted in increasing volume can be decreased by the recycling of them. The disposal of waste materials formed in the public spaces of cities and during the processing of agricultural row materials and by-products in landfills is inconceivable, so they must be recycled.
    These materials mostly with organic compounds could be the primary substrates of composts. Completed with suitable additives, and applied appropriate treating technology, composts are capable to supply horticultural plants with nutrients. Composting wastes and byproducts not just decreases the amounts of deposited waste materials, but increases the nutrient (macro- and micronutrients) content of soils, so this is an  environmentally friendly and alternative way of nutrient management of plants.

  • Effects of the development of production factors on productivity
    13-18
    Views:
    125

    In every economic sector, the enacted and expected quality of the products strongly affects its market entry and subsistence. The aim of management is success, competitiveness and subsistence that require adequate human and material resources and enough production stock. We must also notice that the quality of tools and instruments significantly influences work productivity. This applies to both plant production and animal husbandry.

    The author researched milk production factors with methodical observation, document analysis and interviews. Data were collected with a ten-year interval, thus this assay can highlight the field, volume and sources of investments during this period and that the production stock increased in most farms and decreased in few. The data also shows the influence of investments on work productivity - there are differences between farms of equal size, so there are still ways of development.

  • Efficiency of Fertilization in Sustainable Wheat Production
    59-64
    Views:
    106

    In sustainable (wheat) production plant nutrition supply and fertilization play decisive roles among the agrotechnical elements, because of their direct and indirect effects on other agronomical factors.
    In long-term experiments, we studied the roles of agroecological, genetic-biological and agrotechnical factors in the nutrient supply, fertilization and its efficiency in wheat production under continental climatic conditions (eastern part of Hungary, Trans-Tisza) on chernozem soil. Our results have proved that there are different (positive and negative) interactions among ecological, biological, and agrotechnical elements of wheat production. These interaction effects could modify the nutrient demand, fertilizer (mainly nitrogen) response of wheat varieties and efficiency of fertilization in wheat production.
    The optimum N-doses (+PK) of wheat varieties varied from 60 kg ha-1 (+PK) to 120 kg ha-1 (+PK) depending on cropyears, agrotechnical elements and genotypes. The winter wheat varieties could be classified into 4 groups according to their fertilizer demand, natural and fertilizer utilization, fertilizer response and yield capacity.
    Appropriate fertilization (mainly N) of wheat could affect both the quantity and quality of the yield. By using optimum N (+PK) fertilizer doses, we could manifest genetically- coded baking quality traits of winter wheat varieties and reduce quality fluctuation caused by ecological and other management factors. The efficiency of fertilization on different baking quality parameters (wet-gluten, valorigraph index etc) were variety specific (the changes depended on genotypes).
    Our long-term experiments proved that appropriate fertilization provides optimum yield, good yield stability and excellent yield quality in sustainable wheat production. We could this get better agronomic and economic fertilization efficiency with less harmful environmental effects.

  • Growth and clorophyll content dynamics of winter wheat (Triticum aestivum L.) in different cropyear
    101-105
    Views:
    108

    The experiments were carried out at the Látókép experimental station of the University of Debrecen on chernozem soil in a long term winter wheat experiment in the season of 2011 and 2012 in triculture (pea-wheat-maize) and biculture (wheat-maize) at three fertilisation levels (control, N50+P35K40, N150+P105K120). Two different cropyears were compared (2011 and 2012).

    The research focused on the effects of forecrop and fertilisation on the Leaf Area Index, SPAD values and the amount of yield in two different cropyears. We wanted to find out how the examined parameters were affected by the cropyear and what the relationship was between these two parameters and the changes of the amount of yield.

    Examining the effects of growing doses of fertilizers applied, results showed that yields increased significantly in both rotations until the N150+PK level in 2011 and 2012. By comparing the two years, results show that in 2011 there was a greater difference in yields between the rotations (7742 kg ha-1 at N150+PK in the biculture and 9830 kg ha-1 at N150+PK in the triculture). Though wheat yields following peas were greater in 2012, results equalized later on at N150+PK levels (8109–8203 kg ha-1).

    Due to the favorable agrotechnical factors, the leaf and the effects of the treatments grown to a great extent in 2011, while in 2012 the differences between treatments were moderate. Until the N150+PK level, nitrogen fertilisation had a notable effect on the maximum amount of SPAD values (59.1 in the case of the biculture and 54.0 in the triculture). The highest SPAD values were measured at the end of May (during the time of flowering and grain filling) in the biculture. In the triculture, showed high SPAD values from the beginning. The same tendency could be observed in the 2012 cropyear, although increasing doses of fertilizers resulted in higher SPAD values until N150+PK level only from the second measurement. Maximum SPAD values were reached at the end of May in both crop rotation system

  • On the connection between spatial development and sustainable landscape in the Northern Great Plain region
    145-148
    Views:
    61

    This paper tries to find connection between sustainable landscape and spatial development policy of the Northern Great Plain region on the basis of specific examples explained in scientific literature. Searching for the common roots of spatial development and sustainability the paper explains two interpretations of sustainability from the view point of landscape, than the most significant element of current landscape change – the polarization of landscapes – will be introduced. This trend in landscape change basically determines the direction of spatial development. This paper analyses the Northern Great Plain region from two different approaches. In the first grouping the region is exposed from the view point of spatial development. In the second partitioning the area is divided into subject matters based on the principles of sustainability and polarization of landscape. This research – analyzing development plans and strategies – considers the current situation within the subject matters.

  • The effect of Willow extract, Bistep and their combination on some quality parameters of lettuce (Lactuca sativa L.)
    239-247
    Views:
    184

    The research described in this paper was conducted at the University of Debrecen, Farm and Regional Research Institute in its Botanical and Exhibition Garden, Hungary. The aim was to investigate the influence of plant biostimulants on the morphological parameters of three lettuce varieties (May King, Kobak and Great Lakes). Willow bark extract and Bistep were used through irrigation and spray onto the plant leaves with the amount of 5% Willow and 0,5% Bistep. Vegetative parameters like head structure (1….10), head weight (g head-1), head closing (1….10), number of leaves, head diameter (cm), internal stem size (cm) and root weight (g head-1) were measured in 2019 and 2020. According to our results, vegetative parameters are significantly affected by plant varieties and treatments. In the experiment of 2019, important vegetative parameters were influenced by the Willow extract, while in the season of 2020 the most influenced parameters were under the impact of Bistep biostimulants followed by Willow+Bistep. However, the most favourable vegetative growth was recorded in the Kobak variety in the season of 2019 followed by May King and Great Lakes varieties in the season of 2020. On the other hand, the interaction effect of plant varieties and plant biostimulants on the vegetative parameters were varied from seasons. For example, for the season 2019, significantly the highest vegetative value was recorded for the interaction of May King variety treated with Willow extract, whereas in 2020, significantly the most influenced vegetative parameters were under the influence of the interaction of Bistep and May King variety followed by the interaction of Willow+Bistep and Kobak variety.

  • Examination of the effects of the cropyear and the nutrient supply on the quality of winter wheat with the help of Győri’s Z-index
    121-125
    Views:
    63

    In the case of winter wheat,the knowledge of several quality features is needed to be able to determine precisely the real quality of the given
    wheat. Several systems have been worked out on the qualification of the winter wheat in Hungary and other countries as well. Evaluating the
    quality is being made more difficult because the different quality features take part in the development of the quality in different degrees and
    the values of the several quality features are in different intervals and these data are different dimension values. On the evidence of the
    results, in the case of considering several features,it can be difficult to rank into one concrete quality cathegory. Researchers are trying to
    develop complex quality index numbers in order to be able to define the quality more precisely. One of these complex quality index numbers
    is Gyıri’s, so called, Z-index.
    In three years from 2006 and 2008, we examined the change of the quality features of nine varieties of winter wheat with the help of the
    Z-index under the influence of the effects of the different cropyears and the fertilizer treatment. The results show that the Z-index of the
    examined varieties of winter wheat were influenced by several factors. Examining the data of the three different breeding years together we
    can observe the corrective effect of the different cropyears on the Z-index, and if we examine the three years separately and together, the
    differences of the quality features of the different varieties differentiate very well, and with the help of the Z-index the comparison of the
    types is easier and perspicuous, and the Z-index represents the different nutrient reactions of the different types as well. On the average of
    the three years, the types gave the best results at N120-150+PK nutrient level. Among the nine varieties the best results were given by Mv Suba,
    GK Békés and Mv Mazurka in the case of both low and higher nutrient levels.

  • Validation of the competence profile of agri-environmental engineering bachelor course
    63-71
    Views:
    160

    As member of the European Union, the development if the Hungarian agriculture is determined by the Common Agricultural Policy. After the reform of the Common Agricultural Policy in 2003, the environmental protection has got a crucial function. The constant changing role of agriculture has reacted students in higher education. For firms connected to agriculture, human resource management based on competency has an important role in custody of competitiveness. One of the most important goals of firms is to supply the demands of their economic partners. To make it successfully, highly qualified human resource is required. The quality of human resource is determined not only by its qualification, language skills, professional experience, and practise, but extant competencies that can also be developed. To choose the expectant employee, it is not enough for them to have intelligence and proficiency; it is also decisive to examine their particular competencies. All of these will define the employee’s
    achievement that will definitely contribute to the success of the enterprise. Basically, closer cooperation is needed between higher education institutions and employers to achieve this goal. At the same time, the higher education institutions can revise their training systems considering the actual requirements of labour market, and accordingly, they can form syllabus in a way to train auspicious experts. In this article examination of the requirements of labour market for graduates from agri-environmental engineering bachelor course is presented.

  • Effect of sowing technology on the yield and harvest grain moisture content of maize (Zea mays L.) hybrids with different genotypes
    17-22
    Views:
    130

    From the aspect of the efficiency of maize production harvest grain moisture content shall be considered beside the amount of harvested grain yield. Hybrids with different genotypes and vegetation period length lose their moisture content different that is affected by row spacing and plant density – among agrotechnical production factors – depending on the given crop year. In the present research work three crop years with different weather conditions were studied (2013, 2014, and 2015). The small-plot field experiment was set up at the Látókép Field Research Centre of the University of Debrecen, Centre for Agricultural Sciences with four replications on a chernozem soil type. The effect of three factors was analysed in the experiment on yield amount and its moisture content. Factors were row spacing (45 and 76 cm), plant density (50, 70 and 90 thousand plants ha-1), while hybrids were of very early (Sarolta: FAO 290), early (DKC 4014: FAO 320, P 9175: FAO 330, P 9494: FAO 390) and medium (SY Afinity: FAO 470) ripening.

    In the crop year of 2013 the highest yield was produced – regarding the average of the hybrids – by the application of a row spacing of 45 cm (4.5%, 673 kg ha-1), however there was no significant difference between the yield of the populations of different row spacings. Significant difference (14.9%, 1751 kg ha-1; 6.3%, 583 kg ha-1) could be found in case of yield between different row spacing applications in 2014 and 2015. The effect of insufficiently distributed low amount of precipitation and lasting heat days in 2015 could be revealed in yield amounts and harvest grain yield moisture content results that were lower than in the previous years. In 2015 grain yield moisture content varied between 10.3 and 13.9% in case of a row spacing of 45 cm, while by 76 cm between 11.0 and 13.9%.

  • Development of seed analyses by means of various matrix solutions and the MALDI-TOF MS technique
    53-57
    Views:
    294

    The earth's population is growing steadily, currently accounting for about 7.3 billion people. Population growth causes food demand to rise, approximately 36 million people die each year due to starvation or related diseases. One solution to this problem is the continuous examination and development of the agricultural economy. In this study, matrix-assisted laser desorption/ionization time-of-flight mass spectrometer (MALDI -TOF MS) were used to analyse of sunflower, soybean and hemp. In order to analyse the protein of maize, this method has already been applied. However, for sunflower, soy and hemp, it is necessary to develop a sample preparation method. Choosing the optimal matrix solution for ionization the traget molecule is an essential part of developing the method. Our aim is to compare two different matrix solutions (α-HCCA, SA matrix), based on the properties (intensity, noise ratio, value of spectra) of the spectra.

  • Biomass production estimation of processing tomato using AquaCrop under different irrigation treatments
    131-136
    Views:
    199

    The wiser usage of irrigation water is inevitable in the future. Irrigation has very high input cost; therefore, farmers must carry out irrigation with care. Also, the effect of irrigation on crops has a big role in decision making. Modeling provides a possibility to evaluate this effect. AquaCrop, as a crop production simulation model has great potential in this field. The accuracy of tomato biomass yield prediction of the model was tested in this research. For collecting the necessary data, a field experiment was conducted at Szarvas on processing tomato with different water supplies, such as 100% (I100), 75% (I75), 50% (I50) of potential evapotranspiration and a control with basic water supply (C). The relation of the simulation and actual biomass yields was evaluated during the season. Very good correlation was found between the modelled and the actually harvested data. The data for the control and I100 treatments showed higher correlation than the I75 and I50. The relationship for all of the data was moderately strong. Miscalculations occur mostly when the dry biomass yield reaches
    7 t ha-1. The accuracy of the model was evaluated with the use of mean absolute error (MAE) and root mean squared error (RMSE) values. The least error was found in the C treatment, which means 0.34 MAE and 0.45 t ha-1 RMSE. The simulation resulted in higher errors in the I75 and I50 treatments.

  • Flesh firmness examination of scab-resistant apple varieties in a storage experiment
    93-98
    Views:
    129

    Of the different physical characteristics of fruits, one of the most essential qualities is flesh firmness, as is an important parameter when selling fresh apples, processing the fruit (processing industry) and during its storage. In the scope of our research, we examined five apple varieties originating from the Derecske horticultural site of KITE cPlc. in 2016. The plantation was planted to be suitable for intensive apple production. Samples were collected at the time of maturity (August-October) of the given variety. The five examined apple varieties (Gaia, Isaaq, Modí, Smeralda and Fujion) are all resistant to apple scab (fungal disease caused by Venturia inaequalis). The two-month storage experiment was conducted at 16-17 °C, which had an aggressive effect on our stored apples. Flesh firmness, weight and diameter were measured on three dates for each of the five apple varieties. Our results were evaluated using IBM SPSS Statistics 20 software. We aimed to compare flesh firmness, weight and diameter of the five apple varieties and their changes during storage. Isaaq (86.34 N/cm2), Modí (94.06 N/cm2) and Fujion (84.90 N/cm2) had outstanding initial flesh firmness results. The Modí apple variety provided the best storage parameters.

  • Development of the antioxidant indexes (FRAP, TFC, TPC) of scabbing resistant apple varieties in storage
    89-94
    Views:
    137

    One of the most important groups of bioactive substances in apples are antioxidants, which have a health-preserving effect. The amount of these compounds varies not only during the ripening of the apple fruit, but also continuously during post-harvest storage. A growing group of health-conscious consumers are looking for apple varieties with a nutritional value that satisfies their needs.

    In the scope of our research, we examined 5 apple varieties originating from the Derecske horticultural site of KITE cPlc. in 2016. The plantation was planted to be suitable for intensive apple production. Samples were collected at the time of maturity (August-October) of the given variety. The 5 examined apple varieties (Gaia, Isaaq, Modí, Smeralda and Fujion) are all resistant to apple scab (fungal disease caused by Venturia inaequalis). The 2-month storage experiment was conducted at 16–17 °C, which had an aggressive effect on our stored apples. Total polyphenol (TPC) and flavonoid (TFC) content as well as FRAP values of the apples were measured. Measurements were taken immediately after harvest and after 1 and 2 months of storage. Our results were evaluated by using the IBM SPSS Statistics 20 software. Our aim was to compare the antioxidant results of 5 scab-resistant apple varieties, which change continuously during storage.

    The antioxidant content of our apple varieties increased during 2 months storage. The best result was achieved by the Modí apple variety (FRAP: 467.32 mg/100g; TFC: 317.76 mg/100g; TPC: 1771.97 mg/100g). Consumers may want to consume apples stored for a longer period of time if they are to absorb large amounts of antioxidants.

  • The past and present of Érmellék wine region
    49-52
    Views:
    103

    Érmellék is an area of the Partium. It is situated between Szilágy and Bihar counties and between River Kraszna and Berettyó. Its name is from Ér, the small brook, which crosses the area. Érmellék is famous for its wine production, because its climate is favourable for this kind of trade. Only a few information sheets of the small Partium-belonging micro-region, Érmellék are published nowadays. Érmellék has extremely picturesque architectural wine cellar rows, of which ”szalacsi” wine cellar row (wine cellar row system) with its unique structure consists of about a thousand cellars.