Search
Search Results
-
Biomass production estimation of processing tomato using AquaCrop under different irrigation treatments
131-136Views:541The wiser usage of irrigation water is inevitable in the future. Irrigation has very high input cost; therefore, farmers must carry out irrigation with care. Also, the effect of irrigation on crops has a big role in decision making. Modeling provides a possibility to evaluate this effect. AquaCrop, as a crop production simulation model has great potential in this field. The accuracy of tomato biomass yield prediction of the model was tested in this research. For collecting the necessary data, a field experiment was conducted at Szarvas on processing tomato with different water supplies, such as 100% (I100), 75% (I75), 50% (I50) of potential evapotranspiration and a control with basic water supply (C). The relation of the simulation and actual biomass yields was evaluated during the season. Very good correlation was found between the modelled and the actually harvested data. The data for the control and I100 treatments showed higher correlation than the I75 and I50. The relationship for all of the data was moderately strong. Miscalculations occur mostly when the dry biomass yield reaches
7 t ha-1. The accuracy of the model was evaluated with the use of mean absolute error (MAE) and root mean squared error (RMSE) values. The least error was found in the C treatment, which means 0.34 MAE and 0.45 t ha-1 RMSE. The simulation resulted in higher errors in the I75 and I50 treatments. -
Development of seed analyses by means of various matrix solutions and the MALDI-TOF MS technique
53-57Views:887The earth's population is growing steadily, currently accounting for about 7.3 billion people. Population growth causes food demand to rise, approximately 36 million people die each year due to starvation or related diseases. One solution to this problem is the continuous examination and development of the agricultural economy. In this study, matrix-assisted laser desorption/ionization time-of-flight mass spectrometer (MALDI -TOF MS) were used to analyse of sunflower, soybean and hemp. In order to analyse the protein of maize, this method has already been applied. However, for sunflower, soy and hemp, it is necessary to develop a sample preparation method. Choosing the optimal matrix solution for ionization the traget molecule is an essential part of developing the method. Our aim is to compare two different matrix solutions (α-HCCA, SA matrix), based on the properties (intensity, noise ratio, value of spectra) of the spectra.
-
Flesh firmness examination of scab-resistant apple varieties in a storage experiment
93-98Views:341Of the different physical characteristics of fruits, one of the most essential qualities is flesh firmness, as is an important parameter when selling fresh apples, processing the fruit (processing industry) and during its storage. In the scope of our research, we examined five apple varieties originating from the Derecske horticultural site of KITE cPlc. in 2016. The plantation was planted to be suitable for intensive apple production. Samples were collected at the time of maturity (August-October) of the given variety. The five examined apple varieties (Gaia, Isaaq, Modí, Smeralda and Fujion) are all resistant to apple scab (fungal disease caused by Venturia inaequalis). The two-month storage experiment was conducted at 16-17 °C, which had an aggressive effect on our stored apples. Flesh firmness, weight and diameter were measured on three dates for each of the five apple varieties. Our results were evaluated using IBM SPSS Statistics 20 software. We aimed to compare flesh firmness, weight and diameter of the five apple varieties and their changes during storage. Isaaq (86.34 N/cm2), Modí (94.06 N/cm2) and Fujion (84.90 N/cm2) had outstanding initial flesh firmness results. The Modí apple variety provided the best storage parameters.
-
Development of the antioxidant indexes (FRAP, TFC, TPC) of scabbing resistant apple varieties in storage
89-94Views:302One of the most important groups of bioactive substances in apples are antioxidants, which have a health-preserving effect. The amount of these compounds varies not only during the ripening of the apple fruit, but also continuously during post-harvest storage. A growing group of health-conscious consumers are looking for apple varieties with a nutritional value that satisfies their needs.
In the scope of our research, we examined 5 apple varieties originating from the Derecske horticultural site of KITE cPlc. in 2016. The plantation was planted to be suitable for intensive apple production. Samples were collected at the time of maturity (August-October) of the given variety. The 5 examined apple varieties (Gaia, Isaaq, Modí, Smeralda and Fujion) are all resistant to apple scab (fungal disease caused by Venturia inaequalis). The 2-month storage experiment was conducted at 16–17 °C, which had an aggressive effect on our stored apples. Total polyphenol (TPC) and flavonoid (TFC) content as well as FRAP values of the apples were measured. Measurements were taken immediately after harvest and after 1 and 2 months of storage. Our results were evaluated by using the IBM SPSS Statistics 20 software. Our aim was to compare the antioxidant results of 5 scab-resistant apple varieties, which change continuously during storage.
The antioxidant content of our apple varieties increased during 2 months storage. The best result was achieved by the Modí apple variety (FRAP: 467.32 mg/100g; TFC: 317.76 mg/100g; TPC: 1771.97 mg/100g). Consumers may want to consume apples stored for a longer period of time if they are to absorb large amounts of antioxidants.
-
Effect of sowing technology on the yield and harvest grain moisture content of maize (Zea mays L.) hybrids with different genotypes
17-22Views:301From the aspect of the efficiency of maize production harvest grain moisture content shall be considered beside the amount of harvested grain yield. Hybrids with different genotypes and vegetation period length lose their moisture content different that is affected by row spacing and plant density – among agrotechnical production factors – depending on the given crop year. In the present research work three crop years with different weather conditions were studied (2013, 2014, and 2015). The small-plot field experiment was set up at the Látókép Field Research Centre of the University of Debrecen, Centre for Agricultural Sciences with four replications on a chernozem soil type. The effect of three factors was analysed in the experiment on yield amount and its moisture content. Factors were row spacing (45 and 76 cm), plant density (50, 70 and 90 thousand plants ha-1), while hybrids were of very early (Sarolta: FAO 290), early (DKC 4014: FAO 320, P 9175: FAO 330, P 9494: FAO 390) and medium (SY Afinity: FAO 470) ripening.
In the crop year of 2013 the highest yield was produced – regarding the average of the hybrids – by the application of a row spacing of 45 cm (4.5%, 673 kg ha-1), however there was no significant difference between the yield of the populations of different row spacings. Significant difference (14.9%, 1751 kg ha-1; 6.3%, 583 kg ha-1) could be found in case of yield between different row spacing applications in 2014 and 2015. The effect of insufficiently distributed low amount of precipitation and lasting heat days in 2015 could be revealed in yield amounts and harvest grain yield moisture content results that were lower than in the previous years. In 2015 grain yield moisture content varied between 10.3 and 13.9% in case of a row spacing of 45 cm, while by 76 cm between 11.0 and 13.9%.
-
Evaluation of the yield and baking quality of winter wheat (Triticum aestivum L.) varieties in different cropyears
95-100Views:271We have investigated the effect of the cropyear, the genotype, the nutrient supply and their interactions on the yield and the quality parameters of three different winter wheat genotypes in three different cropyears. The most disadvantageous influence on the yield averages was caused by the moist weather of 2010, when yield results fell behind the mean of the two other examined years and the nutrient optimum was around low doses. The optimal cropyear turned out to be the ordinary 2011, the best yield results were experienced during this cropyear. Although the drier periods in 2012 decreased the yield values, the varieties could realize high yield maximum values. Considering the yield results, Genius turned out to be the best variety. In respect of the quality traits, 2010 turned out to be the best cropyear in case of all the three varieties. Despite the dry weather of the spring of 2012, the precipitation fell during flowering and ripening phases had positive impact on the grain-filling processes and contributed to the development of better quality. As a consequence of the significantly lower amount of precipitation during the generative phenological phases, the worst quality parameters were realized by the varieties in 2011.
In respect of crop year effect, 2010 was unfavourable for the amount of yield, but the most beneficial for the quality. 2011 was the most advantageous for the yield amounts but disadvantageous for the quality parameters. Although in 2012 extreme crop year effects were experienced after each other (dry and warm spring, moist and warm summer), the yield average and quality trait values were close to the yield averages of 2011 and quality parameters of 2010. Analyzing our results we can state that the average crop year was favourable rather for the yield. The appropriate amount of precipitation during the whole 2010 and that during the generative phenophases in 2012 favoured the development of good quality.
Consequently, the appropriate amount of precipitation is essential for the development of good quality during the grain-filling period. The negative crop year effects were only compensated but not eliminated by the good nutrient supply. Genius achieved excellent yield averages but performed worse quality parameters than Mv Toldi, whose quality parameters were outstanding but the yield averages fell slightly behind those of Genius. Considering the yield results, the variety Genius turned out to be the best, while Mv Toldi was the best in quality.
-
Comparative study of different soybean genotypes in irrigation technology
91-95Views:828In many places in Hungary, early maturity soybean can be successfully grown. The earlier maturity group of soy which ripened in 110–125 days in most crop areas in Hungary. However, to achieve excellent results, the selection of proper varieties is important too. Successful cultivation is largely dependent on the macro and microclimate of the production area, the nutrient supply of the soil and the cultivation technology. Soybean can be produced in places where the amount of precipitation is right, as the lack of water results in lower yields and deteriorated oil and protein concentrations. In the following study, 2 years (2016 and 2017) are compared to the yield, protein and oil content of the soybeans of the early maturation group in irrigated and non-irrigated treatments. Based on our experiment, it can be stated that, during the irrigation of soybean, oil and protein content and yields did not always change.
-
Thinning and final cutting control in black locust (Robinia pseudoacacia L.) stands: a methodological approach – Short communication
43-46Views:259Planning, implementing and inspecting forestry operations require more extent application of certain assessment methods. These methods may need to be improved and, in some cases, their simplification is necessary in order to ease their usage in practice. Knowledge and application of auxiliary tables and functions, data on volume and methods to estimate yields are needed for the planning of any kind of forestry operations, depending on the level of planning. The main purpose of this paper is to propose relatively rapid and simple methods to estimate the volume at thinning and final cutting, and the gross above ground volume at the harvest of black locust (Robinia pseudoacacia L.) stands, as well as to introduce tending operation models tailored for black locust. All these measures could be beneficial to forest authorities and foresters who are responsible for planning and production.
-
The synthesis of selenium nаnоpаrtiсle (SeNPs) – Review
5-8Views:584Selenium is an important dietary miсrоnutriеnt required for the nоrmаl physiоlоgy and mеtаbоlism of humans and аnimаls. The biоlоgicаl prоperties оf selenium nаnо pаrticle depend оn their size аnd fоrms. Sеlenium nаnоpаrticle (SeNPs) аttrасts еvеn mоrе аttеntiоn, thanks to its high biоаvаilаbility аnd muсh lоwеr tохiсity thаn inоrgаniс аnd оrgаniс fоrms. In this review, I summаrized the infоrmаtiоn аnd wаys оf prоductiоn оf selenium nаnоpаrticle. SeNPs hаve been prоduced in chemicаl, physicаl, аnd biоlоgicаl wаys. In recent years, biоlоgicаl wаys hаve been especially important in the prоductiоn оf selenium nanoparticles.
-
Biostimulant induce growth, chlorophyll content and fresh herbage yield of alfalfa (Medicago sativa L.) and variegated alfalfa (Medicago × varia Martyn) plant
19-25Views:476The use of biostimulants is associated with promoting plant growth by stimulating cell division and improving nutrient availability and uptake. A study was conducted at the University of Debrecen, Hungary, to examine the effect of biostimulants on alfalfa growth, chlorophyll content and fresh herbage yield. The experiment was arranged in a randomised complete block design with three biostimulant treatments plus control replicated three times. Data collected were subjected to analyses of variance using Genstat, where significantly different means were separated at a probability of 5% using the least significant difference. The findings show no different variation in plant height or chlorophyll content (SPAD) throughout the early stages of growth. Nonetheless, a notable impact was noted in the latter stages (28 days after biostimulant treatment application) on the growth of the alfalfa plant. Biostimulant treatments did not had effect on fresh yield for second through fourth cuts, but the fifth cut showed a significant effect, with T1 treatment recording the highest herbage yield of 19745 kg ha-1 followed by T2 (Tricho Immun plus Ino Green) and T3 (Tricho Immun), with yields of 19528 kg ha-1 and 17273 kg ha-1, respectively, while the T0 (control) recorded the lowest herbage yield of 12060 kg ha-1. However, the average mean yield indicated the application of biostimulants significantly increased fresh yield herbage by 20.5%. Correlation coefficient values suggested plant height at both 14 and 28 DAH (days after harvest) strongly correlated with fresh herbage yield (r = 0.7756 and 0.7455) which reflected in the increase in fresh herbage yield. Therefore, our results suggest that the use of biostimulants in alfalfa cultivation holds promise for improving growth and yield potential through their positive effects on chlorophyll content and the growth of alfalfa plant.