Search
Search Results
-
Developing of Analytical Methods for Determination of Greywaters’ Detergent Content
42-47Views:219In our research we improved the technologies for the determinations of greywaters’ detergent content. We examined the quantity of anionic detergent (ANA) in synthetic greywater with Hyamine reagent using two-phased titrimetric method. We added to the synthetic greywater samples phenolphthalein indicator, acid mixed indicator and chloroform. After we shaked the mixture, and we got two separated phase. We titrated the mixture with cation active Hyamine reagent. The quantity of the chloroform and the quality of greywater samples (syntetic and real) were also changed in these experiment to determinate the actual ANA content. It was shown that the applied method is representative and reliable, too.
-
Examination of macro- and micro elements in the artificial bathwater samples
61-69Views:154During our research, micro- and macro element content of synthetically produced bathwater was examined. Previous studies, which were conducted at the Department of Environmental Engineering at the Faculty of Engineering, University of Debrecen, proved that the quality of domestic greywater is greatly varied. This diversity can also be observed in the case of greywaters. The examination of bathwater samples covered the contentanalysis of Al, Ba, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Sr, Zn, Ca, K, Mg, Na, Li elements with the application of MP-AES method. The analysis of greywater’s micro and macro content is essential part in the control of irrigation systems, flushing as well as car washing, because its heavy metal content can have a significant effect on the environment. In this study, we would like to present the concentration values of micro and macro elements of the examined greywater samples. Furthermore, we would like to make a comparison among our result, previously examined greywater samples and drinking water samples, too.
-
Greywater Treatment with Oxidative Agents
27-31Views:233In our research we pretreated synthetically produced greywaters with filtration on various filters, then we treated the samples with oxidative agents. We characterised the quality of greywater samples with several parameters. We investigated these parameters on the untreated, pretreated, and oxidated samples as well. We evaluated the efficiency of the treatments by measuring the characteristic parameters. In addition, we investigated the changes on the filter media’ surface with a scanning electron microscope (SEM). It was shown, that the most effective treatment combination for the greywater’s preparation for reuse is the filtration on silica sand or activated charcoal and silica sand combined filter media, then oxidation with hydrogen peroxide (10 mmol/dm3).
