Keresés

Keresési eredmények

• Formation of Oxide Layers with Femtosecond Laser on Steel Surfaces for Color Marking

  174-178

  Juhász Gergely

  Berczeli Miklós

  Weltsch Zoltán

  Megtekintések száma:

  311

  With the appearance of ultrashort pulse lasers, the researchers have begun working on various laser marking technology. Atmospheric heating and ablation of a surface induce laser coloration of metal surfaces. However, their application is still problematic today in the industry. With the appearance of femtosecond pulse lasers, a new concept became available for color marking. This concept is based on the formation of laser-induced periodic surface structures (LIPSS) on metal surfaces. The purpose of this article is to summarize the literature of laser color marking with ultrashort pulse lasers.

• Surface Activation of High Impact Polystyrene Substrate Using Dynamic Atmospheric Pressure Plasma

  80-87

  Juhász Gergely

  Berczeli Miklós

  Weltsch Zoltán

  Megtekintések száma:

  246

  Over the last decade, the number of researches has increased in the field of bonding technologies. Researchers attempt to improve surface adhesion properties by surface treatments. Adhesive bonding is one of these bonding techniques, where it is important to see what surfaces will be bonded. One such surface property is wetting, which can be improved by several types of surface treatment. In recent years, atmospheric pressure plasmas have appeared, with which research is ongoing on surface treatments. In our research, we will deal with the effects of plasma surface treatment at atmospheric pressure and its measurement. In addition, we summarize the theoretical background of adhesion, surface tension and surface treatment with atmospheric pressure plasma. Our goal is to improve adhesion properties and thus the adhesion quality.

• Study of Rotating and Jet Plasma Treatments on Surface Wettability of Glass

  67-79

  Berczeli Miklós

  Weltsch Zoltán

  Megtekintések száma:

  21

  This work investigates the wettability properties of a glass surfaces by using atmospheric pressure cold plasma systems. Treatments were performed by using a rotating-head unit and a jet-type torch during the plazma treatments. The nozzle-to-surface distance (8–15 mm) and the feed rate (50–400 mm/s) were modifying. The untreated glass showed limited wetting, with average water and ethylene glycol contact angles (WCA and EGCA) of 64.7° ± 1.8° and 45.2° ± 1.5°, respectively. After plasma treatment, both systems showed clear improvements, although their efficiency profiles were different. Using the rotating plasma head at 8 mm and 100 mm/s speeds, the WCA decreased to 9.3° ± 0.8°, indicating almost complete wetting. Jet plasma achieved similar results (WCA = 14.1° ± 1.2°), but slightly less uniformly. Changes in wettability were closely related to the exposure time determined by the feed rate: slower movement increased activation, while overexposure occasionally resulted in small thermally induced surface marks that were visible under an optical microscope. As the results showed the rotating plasma reached more homogeneous activation, while the jet system provided stronger local effects at a lower energy input. Based on these results the atmospheric plasma is effective in increasing the surface energy. Rotating systems appear to be advantageous for large, flat areas, while jet plasma is better suited for localized surface modification aimed at improving adhesion or coating performance.

• Improvement of High Strength Automotive Steels Wettability Properties Using CO2 Laser Surface Treatment

  422-427

  Tajti Ferenc

  Berczeli Miklós

  Weltsch Zoltán

  Megtekintések száma:

  242

  As a result of stricter environmental and safety standards, vehicle manufacturers have to reduce the weight of the vehicles, because 10% weight loss cause 8-10% reduction of fuel consumption. To reduce car’s weight and increase safety, vehicle manufacturers use high-strength steels. Further weight reduction can be achieved by using corresponding bonding technology (soldering, sticking) and optimizing these technologies can increase the strength of the joints. According to literature research, the improvement of interface properties has a large effect on bonding technologies. In order to improve interface properties, we can use multiple surface treatments. In our research we investigate the effects of CO2 laser surface treatment on high strength steels, because CO2 lasers are often used in the vehicle industry. In order to detect the effect of surface treatment, we investigate the wettability of the treated and untreated steels. In our research we measure the surface tension of treated and untreated steels. Our main goal is to improve wettability properties thus the bonding technology. In our research we used DP 600 high strength steel sheet with the thickness of 1 mm. We cut the steel sheet to 25mm wide and 55mm long workpieces. Before the surface treatment, the workpieces had to be cleaned and degreased using methanol. We searched for parameters that do not cause any visible changes on the surfaces. Among the parameters of the treatment we were able to change the output power of the laser. We used contact angle measurement to examine the wettability.