Search
Search Results
-
Hybrid-specific nutrient and water use of maize on chernozem soil
51-54Views:110The field research was set up on chernozem soil at the Látókép AGTC KIT research area of the University of Debrecen. The study focused on yield, water utilization, nutrient reaction and the amount of yield per kg fertilizer of corn hybrid NX 47279 in 2011 and 2012. Based on the yield results it can be concluded that the largest yield in 2011 was 15 963 kg ha-1 at level N120+PK, while in 2012, the maximum yield amounted to 14 972 kg ha-1 at level N90+PK. Surplus yield per kg fertilizer proved that in 2011 level N30+PK resulted in the highest surplus yield (42.3 kg kg-1) compared to the control treatment. In 2012, yield growth was 18.0 kg kg-1 compared to the control treatment. We measured at level N60+PK 17,5 kg kg-1 compared to at level N30+PK, at the N90+PK 17,7 kg kg-1 compared to at level N60+PK. level N30+PK kg kg-1, 17.5 kg kg-1 at level N60+PK and 17.7 kg kg-1 at level N90+PK compared to the control treatment.
Results of the regression analysis showed that the amount of nitrogen fertilizer was 117 kg ha-1 in 2011 and 111 kg ha-1 in 2012 in order to reach maximum yield. Doses of fertilizers above the amounts previously mentioned resulted in yield decrease. Our results indicated that in the drought year of 2012 the hybrid used available water more efficiently than in 2011. The hybrid produced 59 kg ha-1 yield in 2012 and 51.9 kg ha-1 in 2011 at an optimum nutrition level.
-
The effect of plant density to the yield results and the yield components of maize hybrids
89-93Views:133Maize is the crop that is produced on the second largest area in our country, in Hungary. It is planted on nearly 25% of the country’s growing area and it was produced on 1 090 439 hectares in 2016. Despite the continuous development of the biological basis and production
technology, the growth of the yield results is not constant, its fluctuation is significant. It can be even up to 60%, because of the extremity of the years. The exploitation of the yield potential of modern hybrids is possible if we harmonize the effects of the ecological factors and properly applied instruments of agro technology and by these we ensure their interaction to reach a favorable outcome. The applied plant density is an important, well researched, but at industrial level a not enough utilized element of the maize production.
The results of the extensive tests, done between 2009 and 2015, showed that the genotype, the year effect and the plant density are in strong correlation with each other determining the yield results. In the past seven years the examined genotypes reached the highest yield
performance at the highest plant densities. The early hybrids (RM90–95, FAO 200–300) are capable of producing them at higher plant density, while in case of the mid and late maturity varieties the further increasing of the density after reaching the optimum level led to yield depression.
According to our experimental results, the yield is in close positive correlation with the increase of the plant density. The effect of the growing season has great significance in forming the yield results and this determines the applicable plant density too.
The yield of maize is determined by a resultant of components. The main component is the number of ears per plant and the amount of kernels per ear, which is calculated from the number of kernels on an ear and the weight of them. The number of the kernels on an ear is
calculated from the number of rows on the cob multiplied by the number of seeds in one row on the cob. In dry years, at lower yield levels the yield decreases because of the shorter ears, while at the higher levels the number of kernels in a row and the thousand-kernel weight decreases,causing yield depression this way. From our examinations it turned out that the plant density reaction of a genotype is individual, every variety reaches its maximum kernel number per hectare – in other words the maximum yield - in an individual way. -
Evaluation of reaction to plant density of sunflower hybrids by regression and Kang’s stability analysis
101-109Views:91The world production area and the total production of sunflower has significantly been growing. The harvested yield was 23.4 and 21.1 million ha in 2005 and 2001, respectively. The total sunflower seed production has also unexpectedly increased.
Although sunflower is produced on lower quality soils in Hungary, in 2005 the average harvested yield was 2.43 t ha-1, which was the highest in the world.
Sunflower is a typical commercial plant and fits well in the crop structure. Since in terms of acreage the most significant crops are corn and cereals, the partial monoculture cultivation cannot be avoided. Sunflower production is a way to eliminate this problem, therefore it has an important role both in cultivation and ecological points of view.
Accordingly, sunflower has an important role in reducing the monoculture cultivation of some plants, as well as increasing biodiversity. Sunflower well adapts to Hungary’s climatic conditions and its production is easily practicable in our country.
The reaction of sunflower hybrids on crop density change is different. Some hybrids are more some are less sensitive to this parameter. In different crop years, the crop density optimums of the different genotypes are also different. In Hungary, the yield and quality is primarily determined by fungal infections, while viruses and bacteria are less important.
The research was conducted at the Látókép farm and Regional Research Institute of the University of Debrecen, Centre of Agricultural Sciences. The research institute is situated by Road 33,15 km from Debrecen in the Hajdúság. The duration of the experiment was seven years, 10 hybrids were examined in each year.
Two hybrids used every year, Aréna/PR and Alexandra/PR hybrids were tested by Kang’s stability analysis. We found that Alexandra/PR was most balanced at every levels of crop density. Both hybrids performed most stable yield at 65000 ha-1 crop density level and less balanced at 35000 ha-1 crop density level. As a result of improved environmental conditions, the yield increase of Aréna/PR was higher than that of Alexandra/PR.
Our regression analysis found that the maximum yield of Lympil, Louidor, Hysun 321, PR63A82 and PR64A63 hybrids were harvested at 47000-60000 plant ha-1 crop density level. The statistical analysis showed that the highest yield was harvested from Lympil and Hysun 321. As regards the crop yield, the most stable hybrids were Louidor and Lympil. The optimum crop density interval of Rigasol/PR and Larisol (58000 plant ha-1) was wider than that of Diabolo (46000 plant ha-1). The maximum yield of Larisol was higher at the optimal crop density level. As regards yield, Diabol was the most stable hybrid.
The statistical analysis on the stability of the yield of Alexandra/PR and Aréna/PR showed that Aréna/PR is more stable, and its optimal crop density level is lower than that of Alexandra/PR. -
The effect of crop year and agrotechnical factors on the yield of various maturity groups of Limagrain maize hybirds
19-23Views:130The Limagrain maize hybrids in different maturity groups were examined at the Látókép Experimental Station of the Centre of Agricultural Sciences and Engineering, University of Debrecen on a calcareous chernozem soil with loam texture, between 2001 and 2007 in a multifactorial long-term field trial. Doses of fertilizers: 1 N:0.75 P2O5:0.88 K2O fixed proportion of NPK doses. The basic dose of nitrogen is 30 kg ha-1. The application of fertilization was 1, 2, 3, 4, and 5 times more than the basic dose, beside of untreated control. The long-term field trial is performed in none irrigated and in irrigated version.
The goal of the study was to analyze the effect of precipitation (environment factor) in one hand, and to evaluate the effect of fertilization and irrigation (agrotechnical factors) on the yield of maize hybrids in different maturity groups in the other hand. At the same time I studied the effect of interaction of different factors on the yield of maize.Analysis the yield of Limagrain hybrids revealed: the years considerably affected the level of the yield. In dry years the yield was 1.351 t ha-1 less, than in rainy years. As the effect of fertilization the yield increased, the statistically proved biggest increment was at level of 90 kg N ha-1. Evaluating the maturity groups, FAO 300 hybrids reached higher level of yield.
In non irrigated conditions in the average of the seven years 60 kg N ha-1 was sufficient to reach the maximum yield. The efficiency of fertilization on yield in irrigated version increased, 120 kg N ha-1 assured the reliable level of yield.
Without irrigation in comparison to the results of FAO 200 group, with the growth of FAO numbers the yield is increasing in all cases. The most significant increase was at FAO 300 (3.562 t ha-1). With irrigation the greatest difference in yield was in FAO 400 (+2.720 t ha-1) compared to FAO 200. -
The effects of agrotechnological factors on winter wheat yield in humid cropyear
162-167Views:77The effects of crop rotation, nutrien supply and crop protection technologies, as well as the appearance of the main ear- and leafdiseases
(powdery mildew, helminthosporium leaf spot, leaf rust, fusarium) were studied on the crop yields of winter wheat variety MV
Pálma during the 2009/2010 crop year. The experiments were conducted in triculture (pea – wheat – corn) and biculture (wheat – corn), at
five nutrition levels, with the use of three crop protection technologies (extensive, conventional and intensive) at the Látókép Research Site of
the University of Debrecen, Centre of Agricultural Sciences. Our results proved that the appearance of leaf- and ear-diseases were
significant in the wheat cultures during the 2009/2010 crop year, because of the rainy, warmer than usual weather, the lodging, and the huge
vegetative mass developed. The most severe infections by the four examined diseases after pea and corn pre-crops were observed at
extensive crop protection levels, when fertilizers were used at the highest dose.
Following corn pre-crop, in the case of all the three crop protection technologies the maximum rate of wheat yield results were achieved
at N150+PK level. The highest yield was reached at intensive crop protection level (6079 kg ha-1). In triculture, in case of all the three crop
protection technologies the maximum yields were achieved at N50+PK level; in extensive technology 5041 kg·ha-1 yield, in conventional
technology 6190 kg ha-1 yield was realised, while in the intensive technological model the yield was 7228 kg ha-1.
The relationship between yield and fertilizer amounts, the rate of pathogen contaminations, crop protection technologies and pre-crops
was defined with correlation analysis in case of different crop rotations during the 2009/2010 crop year. Based on the results of the
experiment, we found that in stands after corn pre-crop strong positive correlation was established between the crop protection level and the
crop yield (0.543), the nutrient levels and the emergence of the four examined pathogens, and between the nutrient levels and the yield
(0.639). Extremly strong positive correlation was observed between crop protection and yield (0.843) in triculture. Strong positive
correlation was detected between the nutrient levels and the presence of the four examined pathogens, as well as between nutrient and
lodging (0.688). Strong negative correlation was between the crop protection level and the four examined diseases both in biculture and
triculture. -
The effect of agrotechnological factors and the cropping season on sweetcorn (Zea Mays L. convar. saccharata Koern.) production in a humid year
146-151Views:70We have examined the effect of three agrotechnological factors (sowing time, fertilization, crop density) and four genotypes on the yield
of sweetcorn on chernozem soil in the Hajdúság region in 2009. The experiment was set up at the Látókép Research Site of the University of
Debrecen. We have included two sowing times (27 April, 26 May), six nutrition levels (control, N30+PK, N60+PK, N90+PK, N120+PK,
N150+PK) and four genotypes (Jumbo, Enterprise, Prelude, Box-R) at two crop density levels (45 thousand ha-1).
In the humid cropyear of 2010 the amount of precipitation exceeded the 30-year average by 184 mm in the cropping season; the average
temperature exceeded the same by 0.8 C on the average of the examined months. The circumstances were most favourable for sweetcorn
production with the first sowing time, thus, this was when the yield of all hybrids was the highest.
With early sowing time, the highest yield (23437 kg ha-1 yield) was obtained with Enterprise at 45 thousand ha-1 crop density level at
N150 + PK nutrition level. The highest yield of the other three hybrids was 22253 kg ha-1 (Jumbo) 22286 kg ha-1 (Box-R) and 1873 kg ha-1
(Prelude). With the second sowing time, the highest yield was obtained with Enterprise again (22237 kg ha-1) at 65 thousand ha-1 crop
density level. With this sowing time the yield of Jumbo, Box-R and Prelude was 20888 kg ha-1, 17796 kg ha-1 and 17401 kg ha-1, respectively.
We found that the highest yield was obtained at the highest nutrition levels (N120 + PK, N150 +PK) with the first sowing time, while the same
was obtained at lower nutrition levels (N90 + PK, N120 + PK) with the second sowing time. -
The Effect of Fertilization and Irrigation on Maize(Zea mays L.) Production
26-29Views:110In a long-term field experiment set up at the Látókép experimental station of the Center of Agricultural Sciences of Debrecen University, the data of the last five years (1995-1999) were analyzed to determine the crop production factors with the greatest influence on maize production and the relationship and interactions between irrigation and fertilization.
In the extremely dry year of 1995, fertilization was found to cause substantial yield depression in the absence of irrigation. According to results of analysis of variance, fertilization significantly reduced the maize yield by 40-90% compared to control plots. Under irrigated conditions, there was a considerable increase in the maize yield, the yield surplus being 4.4-9.4 t ha-1, depending on the nutrient supply level.
During the period from 1996-1999, when rainfall conditions were favorable for maize, fertilization significantly increased the maize yield even without irrigation over the average of the four years. The yield surplus due to fertilization was 3.9-4.6 t ha-1, depending on the fertilization rates. The maximum yield surplus was obtained on plots fertilized with 120 N kg ha-1, while at the rate of 240 N kg ha-1 the maize yield did not differ significantly from this value. During the period examined, corn yield was significantly higher at all three nutrient supply levels as the result of irrigation than in the non-irrigated treatment. As in the case of non-irrigated conditions, the highest fertilizer dose did not result in a substantial yield increase. An analysis of the interaction between fertilization and irrigation indicated that the yield-increasing effect of fertilization was not significantly different under irrigated and non-irrigated conditions. The significant year x irrigation interaction was confirmed by the fact that the yield surplus (1.3-2.3 t ha-1) differed greatly from the irrigation effect recorded in 1995. -
Examination of the Nutrient and Water Utilization of Different Corn Genotypes in the Hajdúság
55-59Views:143The research was set up on chernozem soil at the Látókép MÉK research area of the University of Debrecen in Hungary. We examined the following factors of the hybrid P9494, P9578, PR37N01 and PR37M81 in 2013.Yield, yield production per 1 kg fertilizer, water utilization and nutrient reaction. We found that the best yield results were achieved at level N120+PK in case of hybrid P9494 (17 132 kg ha-1) P9578 (16 838 kg ha-1) and PR37N01 (17 476 kg ha-1) and at level N150+PK for hybrid PR37M81 (16 754 kg ha-1). Results of yield per 1 kg NPK studies indicate that the most intense yield growth occurred at level N30+PK compared to the control treatment. This means that yield production per 1 kg NPK was 39.2 kg kg-1 in the case of hybrid P9494, 54.2 kg kg-1 in the case of P9578, 17.6 kg kg-1 for PR37N01 and 44.2 kg kg-1 in the case of PR37M81. After comparing corn hybrids’ water utilization, our conclusion was that the control treatment achieved the worst results in the case of each hybrid (P9494: 20.8 kg mm-1, P9578: 21.0 kg mm-1, PR37N01: 26.2 kg mm-1, PR37M81: 19.5 kg mm-1). For hybrid P9494, P9578 and P37N01, the best water utilization results were measured at level N120+PK (31.5 kg mm-1, 31,0 kg mm-1 and 32.1 kg mm-1), while PR37M81 reached the highest values at level N150+PK (30.8 kg mm-1). We determined the hybrids’ nutrient reaction and its optimum fertilizer values. The best nutrient reaction results were achieved by hybrid PR37N01, while that of hybrid PR37M81 proved to be the weakest.
-
Study of plant production modells with different intensity in winter wheat production
51-60Views:91The effects of crop rotation, nutrient supply and plant protection technologies were examined on the yield of Mv PÁLMA winter wheat variety and on the most important diseases of ear and leaf. Our experiments were carried out on chernozem soil in the Hajdúság in 2006 and 2007, and three plant protection technologies (extensive, average, intensive) and three irrigation variations (without irrigation, irrigated with 50 mm, irrigated with
100 mm) were applied in different crop rotation systems.
In the triculture crop rotation a higher rate of infection was observed than in the biculture crop rotation, because the vegetative growth was more expressed after pea and these microclimatic factors were favourable for the development of pathogens.
In the triculture crop rotation (pea – wheat – maize) the powdery mildew, DTR and leaf rust of wheat were present in both examined years (powdery mildew 5-15%, DTR 14-42%, leaf rust 8-37% in cropyear 2005/2006, powdery mildew 12-32%, DTR 9-29%, leaf rust 8-26% in cropyear 2006/2007). Fusaria could be observed in 2006 (depending on the plant protection technologies and nutrient supply in the biculture 7-27% and in the
triculture 5-19%). With higher amounts of fertilizers the rate of infection increased and reached its maximum at the highest dose of nutrient supply (N200 +PK).
We observed the highest rate of infection by ear and leaf diseases in the case of the extensive technology, while this rate could be considerably reduced by the application of the intensive technology.
Both in 2006 and 2007, yields were the highest at the N100-200+PK levels in the triculture after pea (6028-7939 kg ha-1 in cropyear 2006, 6578-8690 kg ha-1 in cropyear 2007 depending on plant protection technologies), and at the N150-200+PK levels in the biculture after maize (6096-7653 kg ha-1 in cropyear 2006, 4974-8123 kg ha-1 in cropyear 2007 depending on the plant protection technologies). The highest yield maximums were
reached when pea was the forecrop. The yields on the experimental plots of the intensive plant protection technology was 224-2198 kg ha-1 higher (depending on the forecrop) compared to the plots where the extensive technology was used.
The highest yield without irrigation was at the N150+PK both in biculture and triculture crop rotation. Among the irrigated variations Ö2 and Ö3 at N200+PK fertilisation resulted in the highest yield in the biculture crop rotation, while the N100+PK level in triculture system. In the biculture crop rotation the extra yield was 14-51% higher (575-1225 kg ha-1 depending on plant protection technology) when 50 mm water was irrigated, and
15-54% higher (778-2480 kg ha-1) if 100 mm irrigation was applied comparing to the non-irrigated versions. The yield was 7-17% higher (560-1086 kg ha-1) in the Ö2 irrigation variation, and 8-23% (691-1446 kg ha-1) higher in the Ö3 irrigation variation compared to Ö1 irrigation variation (non-irrigated).
A correlation analysis was made to reveal the connection between the yield, the amount of fertilizers, the rate of infection, the plant protection technologies and the forecrops. Strong positive correlation (0.846) was found between year and fusaria infection. Strong positive correlation was observed between fertilization and powdery mildew infection (0.525), fertilization and DTR (0.528), fertilization and yield quantity (0.683). Lower
correlation was found between fertilization and leaf rust infection (0.409), and forecrop and yield (0.472), recpectively. Negative correlation was calcutated between plant protection technologies and DTR (-0.611), and plant protection technologies and leaf rust (-0.649). -
Study of drought stress correlation on yield and yield components of maize cultivars (Zea mays L.)
67-73Views:160This article was investigated to study the correlation and analysis of drought stress regression on maize cultivars' yield and components. The variance analysis results showed a significant difference between drought stress levels in terms of plant height, total dry weight and number of seeds per row, the total weight of cob, grain yield, harvest index, stem diameter, and cob weight with protective leave. Also, there was a significant difference in ear weight without protective leaves, ear diameter, ear length, plant weight, 100-seed weight, and seed per ear on hybrid treatments. There were statistically significant differences between cultivars in plant height, leaf area, ear diameter, ear length, number of seeds per row, number of seeds per ear, the total weight of cob wood, 100-seed weight, harvest index, plant dry weight. The results of the correlation of traits for the mean levels of drought stress showed a positive and significant correlation between plant yield and plant height, seed per row, ear length and weight of 5 pieces of wood and also with a total weight of cob wood, ear weight with bark showed the highest correlation. There is a significant correlation between leaf area and stem diameter, plant weight, total dry weight at the probability level of 0.05. Correlation coefficients between traits in non-stress conditions showed a positive and significant correlation between grain yield and height, ear length and grain in the row, which was a significant increase compared to stress conditions. The correlation of traits under full stress conditions also showed that the correlation coefficient between cob length trait and positive height was positive and significant. From the study of correlation coefficients between maize traits in non-stress conditions, it can be concluded that the most important components of grain yield are cob length and grain per row. While the correlation coefficients under moisture stress conditions show that the grain trait in the row has a positive and significant correlation with yield, under stress conditions in the cob stage did not show any traits with correlation yield.
-
Effect of cultivation factors on the yield and yield security of maize
263-265Views:119Cultivation factors have a significant effect on the yield and yield security of maize. Ensuring a suitable green crop is important. Tricultural crop rotation (pea–wheat–maize) in the average of 25 years provided a 2 t ha-1 higher yield compared to monocultural cultivation. A harmonious NPK nutriment supply determines yield and yield security, which can be especially realized by means of the application of precision cultivation technologies. Under average circumstances N 80 kg ha-1, P2O5 50 kg ha-1, K20 60 kg ha-1 active ingredient is the agro-ecological dosage of artificial fertilizer.
Plant density is a factor that determines yield. Optimal plant density – beside the genetic characteristics of the hybrid – is mostly influenced by the level of water and nutriment supply. -
Studies on yield stability in autumn wheat species
61-66Views:78The environmental adaptability of crop production is basically determined by the selection of biological background (plant species and varieties) suitable for the region and the site. The sowing structure adapted to the ecological background increases the yield and decreases the yield fluctuation caused natural effects. Exact long-term trials are essential to develop variety structure of winter wheat production suitable for the given ecological conditions. We have examined the productivity and yield stability of genetically different state registered winter wheat varieties. We have compared the varieties’ yield results in plot trials, at similar agrotechnical conditions, in different cropyears. We have examined the absolute and relative (compared to the mean of varieties) yield of winter wheat varieties. We have valued the yield stability of genotypes with the help of analysis of variance and linear regression equations. We have defined the connection between productivity and yield stability of varieties. We have pointed out the varieties with good productivity and yield stability in given agroecological conditions.
According to the results of our examinations the developing of variety structure suitable for the agroecological conditions could increase the potential and effective yield level of wheat production. -
Effect and interaction of crop management factors and crop year on the yield of maize (Zea mays L.)
31-41Views:186The aim of this study was to determine the combination of treatment levels of crop management factors which can optimize and sustain maize yield under varying climatic conditions. The effect of winter wheat forecrop, three tillage systems (Mouldboard-MT, Strip-ST, Ripper-RT), two planting densities (60,000 & 80,000 plants ha-1), three fertilizer levels (N0-control, N80, N160 kg ha-1) with four replications in irrigated and non-irrigated treatments were evaluated over a five year period, 2015–2019. The obtained results revealed that growing season rainfall positively correlated with yield, whereas, temperature negatively correlated with yield. Impact of adverse weather on yield was less severe in biculture, irrigated plots, at lower planting density (60,000), lower fertilizer rate (N80) and in RT and ST, compared to MT. In years with favorable rainfall, yields of MT and RT were significantly (P<0.05) higher than ST. However, in a less favorable year, such as 2015, with 299 mm growing season rainfall and the lowest July rainfall (59% below mean) there was no significant difference (P>0.05) in yield among the three tillage treatments. Higher planting density (80,000), and fertilization rate (N160) in tandem with MT are treatments combination conducive for high yield under favorable climatic conditions, whereas, in years with low rainfall and high temperatures, RT and ST offer alternative to MT for optimum yield with 60,000 plants ha-1 and N80 treatment level. Crop year effect accounted for 20.7% of yield variance, fertilization 35.8%, forecrop 12.8%, plant density 3.4%, tillage 1.2% and irrigation <1%. It is conclusive that with proper selection of the appropriate levels of agrotechnological inputs the adverse effect of weather on yield can be mitigated.
-
Site and hybrid-specific agrotechnical models in sweet corn production
105-108Views:92The effect of three agrotechnical factors (sowing time, fertilization, plant density) and two genotypes on the crop yield of sweet corn was examined on chernozem soil in the Hajdúság region in two different crop years. Compared to the 30-year average, the climate was dry and warm in 2009 and humid in 2010. The experiments were conducted at the Látókép Research Site of the University of Debrecen. In the experiments we applied two sowing times (end of April, end of May), six fertilization levels (control, N30+PK, N60+PK, N90+PK, N120+PK, N150+PK) and two crop density levels (45 thousand ha-1, 65 thousand ha-1). The hybrids we used were Jumbo and Enterprise. As regards the requirements of sweet corn production, the crop year of 2009 was dry and warm. The effect of moisture deficiency was more adverse on the crop yields with the second sowing time. On the contrary, the other examined year (2010) was significantly humid; the precipitation was 184 mm above the 30-year average and the temperature was average.
In the dry and hot crop year, the best yields were obtained with the hybrid Jumbo (25677 kg-1) at 65 thousand ha-1 plant density level on the average of the fertilization levels. The crop yields of Enterprise were also the highest at high plant density level (24444 kg ha-1). With the second sowing time the highest yields were obtained at the higher plant density level (65 thousand ha-1) with both hybrids (Jumbo 18978 kg ha-1, Enterprise 18991 kg ha-1), which confirmed the good adaptation capability of these hybrids at high plant density level. In humid crop year with early sowing time the highest yielding hybrid was Enterprise (at 45 thousand ha-1 crop density level 20757 kg-1), at the same time, Jumbo was best yielding at the higher plant density level (18781 kg-1). With the second sowing time the highest crop yield was obtained with Enterprise again (20628 kg ha-1 at 65 thousand ha-1 plant density level). With this sowing time the average yields of Jumbo, was 18914 kg ha-1 respectively. We found that dry crop year and early sowing time provided the best conditions for sweet corn production; the highest yields were obtained under these circumstances, which might be the results of the outstanding water management of chernozem soils. -
The effect of crop protection and agrotechnical factors on sunflower in the Hajdúság region
39-46Views:79Extreme weather conditions are becoming more and more frequent in the crop years, thus increase the risk of sunflower production.
The objective of researches into plant production is to minimize these effects as much as possible. In this sense, the optimization of
agrotechnological factors is of high importance. Within these factors, the appropriate crop technology (sowing time, crop density)
and optimized, rational crop protection technologies are important, especially in the highly sensitive sunflower cultures. The effect of
sowing time, crop density, and fungicide treatments on the yield of sunflower hybrids was analysed in different crop years in 2008
and 2009. In each case, the infection was highest with the early sowing time and at the highest crop density level (65000 ha-1). When
one fungicide treatment was applied, the rate of infection decreased compared to the control treatment. The further decrease of the
infection rate was less after the second fungicide treatment.
In the humid year of 2008 the crop yield was the highest at 45000 ha-1 crop density level in the control treatment and at 55000 crop
ha-1 crop density level when fungicides were applied. In the draughty year of 2009 the maximum yield was gained at 55000 ha-1 crop
density level in the control treatment and at 65000 crop ha-1 when fungicides were applied. In 2008 and 2009 as regards the crop
yield, the difference between the optimal and minimal crop density levels was higher in the fungicide treatments than in the control
treatment (in 2008: control: 517 kg ha-1; one application of fungicides: 865 kg ha-1; two applications of fungicides: 842 kg ha-1), (in
2009: control: 577 kg ha-1; one application of fungicides: 761 kg ha-1; two applications of fungicides: 905 kg ha-1).
In each and every case, the first treatment with fungicides was more effective than the second. In 2008, the highest yield was
obtained with the third, late sowing time in each fungicide treatment. The differences between the crop yields with different sowing
times was less than in 2009, when the results of the second treatment exceeded those of the first and third treatment in each case. -
Interactive evaluation of the main agrotechnical factors in rape production
71-79Views:78Our polifactorial rape research was carried out at Látókép Research Centre of Debreceni Egyetem AMTC, 15 km away from Debrecen. The aim was to study the unique effect and the interactive effect of more factors. The research factors were the following: cultivation, time of sowing and nutrient supply. Soil moisture datas proved unambiguously that increasing amounts of chemical fertilizer raise the water consumption of rape, lack of water in fertilized plots were always bigger then the water deficit in control plots. The highest amount of water deficit was experienced in the case of arable plots. However, increasing amounts of chemical fertilizers raised the amount of yield proportionately. We experienced yield depression only in the case of arable plots at the highest level of chemical fertilization. In polifactorial rape research sowing of 24th August 2007 of 2007/2008 was the most optimal in point of the amount of yield. This is most-significant in the case of loosening tillage and disking tillage plots, while the plots of ploughing lag behind those two in point of average yield. We experienced the biggest differences of yield in the case of different tillage plots of sowing on 24t August 2007. Still not even the plot with the highest average reached the limit of 4 tons, which can be attributed to high rate of lodging and the harvest loss caused by this. The biggest amount of yield was experienced in the case of sowing of 24th August 2007, with the highest level of chemical fertilization at loosening tillage plot (3930 kg/ha). We can observe big differences between the tillage methods; plots of loosening show a much better average yield then plots of disking and ploughing tillage. Considering the first observed crop year we can state that alternative tillage methods do have a future in rape growing of Hungary.
-
Grain yield and quality of maize hybrids in different FAO maturity groups
126-131Views:64An improvement in the quality of maize grain by increasing the level of components responsible for its biological value is possible
by using genetic means. However, a change in the genotype, together with improving the nutrient properties of the grain, also has some
adverse consequences connected with a fall in yield and in resistance to diseases.
Field experiments were conducted during three years (2003, 2004and 2005) to evaluate environmental effects on grain yield and
quality responses of maize hybrids. Twenty one hybrids of various maturity groups (FAO 150-400) were planted to achieve an optimum
(60-70 000 plants per hectare) plant populations and grown under the medium-N (80 kg N ha-1) fertilization. Environmental conditions
significantly affected maize hybrid responses for grain yield, starch, oil and protein contents, and consequently, starch, oil and protein
yields per hectare. Hybrids of flint type, which have a short vegetation period, had high protein and oil content but the yield averages
were low due to the slower rate of starch incorporation. Hybrids of the dent type have a longer growing season and more intense
carbohydrate accumulation, but low protein and oil contents. In wet years there was a higher rate of starch accumulation, while dry
years are favorable for protein and oil accumulation. Positive correlation existed between starch content and grain yield and 1000-
weight as well as between oil content and volumetric weight among tested hybrids. Negatively correlation existed between grain oil and
starch content as well as between oil content and grain yield and 1000-weight. Thus, end-users that require high quality maize may need
to provide incentives to growers to off set the negative correlation of grain yield with oil and protein content. -
Long term researches regarding the irrigation influence on sugarbeet crop inthe Crisurilor Plain
11-15Views:110The paper is based on the researches carried out in the long term trial placed on the preluvosoil from Agricultural Research and Development Station Oradea, Crisurilor Plain in during 1976–2012.
The soil water reserve in 0–75 cm depth decreased bellow easily available water content every year and in 32% of years the soil water reserve decreased bellow wilting point. For optimum water supply an irrigation rate of 2665 m3 ha-1 (variation interval 500–5090 m3 ha-1) was needed.
The irrigation determined improving of water/temperature + light report (Domuta climate index) with 47.4% in average in the period May–September. A statistically very significant connection was quantified between this indicator and the yield.
Daily water consumption increased in the irrigated variant, the biggest difference in comparison with unirrigated variant was registered in August, 86% in comparison with unirrigated variant. As consequence, the value of the total water consumption increased with 50%, variation interval was 11–154%. The irrigation covered 37.8% of total water consumption, the variation interval was 8.3%–67.9%.
The yield level of the sugarbeet increased in average with 61%, the variation interval was 9–227%. Standard deviation was lower in the irrigated variant and this emphasizes an improve of the yield stability with 25.1%. The sugar content of the sugarbeet roots from irrigated variant increased statistically very significantly in the droughty years and differs significantly in the rainy years.
Water use efficiency increased in the irrigated variant with 7% and irrigation water use efficiency was between 7.9 kg yield gain 1 m-3 irrigation water and 17.4 kg yield gain 1 m-3 irrigation water.
The positive influence of the irrigation on microclimate, water consumption, yield level, stability and quality and on water use efficiency sustain the need of the irrigation in sugarbeet from Crisurilor Plain.
-
Complex appreciation of agrotechnikal factors of sweet corn (Zea Mays L. convar. saccharata Koern.)
77-81Views:111Three agrotechnical factors (sowing time, fertilization, plant density) and the effect of two different genotypes on the yields of sweet corn was studied, in the dry and warm crop-year of 2009 on a chernozem soil in the County of Hajdúság. The experiments were carried out on the Látókép Research Station of Debrecen University. The experiment involved two sowing times (21 of April and 19 of May), six fertilizer levels (control, N30+PK, N60+PK, N90+PK, N120+PK, N150+PK) and two genotypes (Jumbo, Enterprise). Four plant density levels, 45 thousand ha-1, 55 thousand ha-1, 65 thousand ha-1 and 75 thousand ha-1 were used. In the early sowing time the highest yield was obtained with 65 thousand ha-1 plant density level and N120+PK treatment of Jumbo (18169 kg ha-1), while the maximum yield of Enterprise was 17818 kg ha-1 with 75 thousand ha-1 plant density level and N90+PK dose. In case of the late sowing time both hybrids gave the highest yield with 75 thousand ha-1 plant density level and N30 +PK
treatment, with a crop yield of 13143 kg ha-1 (Jumbo) and 14324 kg ha-1, ( Enterprise). -
Using crop analysis in the precision nutrient supply system of maize
183-186Views:87The effect of the N, P and K supplies of soil on the grain yield and N, P and K status of maize was studied in a long-term mineral fertilisation experiment between 2001 and 2008 and nutrient supply limit values were determined to plant analysis. Based on the interaction between the N concentrtion of maize leaves measured at the beginnig of tasseling and grain yield, the satisfactory limit value of N supply to reach 10–14 t ha-1 yield was between 2.0–4.0%. Leaf analysis at the beginning of tasselling indicated that better P and K supplies were associated with a higher P and K concentration in the maize leaves. Correlation analysis on the P concentration of the maize leaves and the grain yield showed that at a grain yield level of 10–14 t ha-1 a P concentration of 0.20–0.37% represented a satisfactory P supply level. The satisfactory K supply limit value to reach 10–14
t ha-1 grain yield was 1.5–2.6%. -
The effect of plant density on the yield of sweet potato
125-128Views:349A field study was conducted in South-East Hungary during the main cropping season of 2016, 2017 and 2018, with the objective of determining the effect of plant spacing on the productivity of sweet potato. Production technology experiments of four repetitions were set up in a randomized block design on sandy soil. The performed treatments consisted of four variations of plant spacing (row distance x plant-to-plant distance): 80 cm x 20 cm, 80 cm x 30 cm, 100 cm x 20 cm, 100 cm x 30 cm. The plant material was the Hungarian registered sweet potato variety ‘Ásotthalmi-12’. Analysis of variance revealed that planting density significantly affected the average yield of storage roots. The highest yield per plant was achieved with the 100 cm x 30 cm (2016, 2017), as well as with the 80 cm x 30 cm (2018) setups. On hectare level, our results showed that the highest plant density of 62,500 plants ha-1 (80 cm x 20 cm setup) could give the highest yield. Comparing the highest tons ha-1 results to those achieved with the plant spacing setups resulting in the highest yield per plant, the differences can be even 13 or 14 tons at hectare level. This finding underlines the importance of choosing the proper planting density towards the higher end.
-
The Effect of Forecrop and Plant Protection on the Pathology Parameters and Yields of Winter Wheat
84-89Views:88We carried out our experiment in the cropyears of 2000/2001, 2001/2002 and 2002/2003, on calcareous chernozem soil, at the experimental site of the Debrecen University Farm and Regional Research Institute, at Látókép. We examined the disease resistance and the yield quantity of Mv Magvas variety by adopting different forecrops and plant protection technologies, at 30+30 N level and at normal cereal row spacing. We applied two forecrops (wheat and pea) and two plant protection technologies (extensive and intensive). We measured the rate of infection by population survey in the first ten days of June.
In the course of our examinations, we found, that the rate of powdery mildew infection was higher in the thicker population sown after pea forecrop in all three years, as powdery mildew is not a typical cereal disease.
The infection rate of leaf mildew and DTR (Dreschlera tritici-repentis) was higher after wheat forecrop in all examined years, because these are typical wheat diseases and infection centres in the soil promote the spreading of these diseases. However, it was possible to parry the adverse effect of forecrops by intensive plant protection.
Due to the chernozem soil, wich has good water management features, and due to the good preparation of the seedbed, the effect of forecrops on yield quantity did not appear in the examined years. The quantity of the yield was only slightly larger after pea forecrop in the cropyears of 2000/2001 and 2002/2003 than after wheat. Nonetheless, the data of technical literatures state that the yield quantity can be larger, even by 15-20%, after pea forecrop.
In the course of intensive plant protection technology, we applied systemic pesticides, while in the course of environmentally sound technology, we used contact pesticides of sulphur content. In those populations that were treated with environmentally sound plant protection technology, infection rate was higher in all three years.
Yield quantities were somewhat lower in the course of applying extensive, environmentally sound technology, because diseases appeared in these populations to the higher degree. Powdery mildew does not, but leaf mildew and Dreschlera tritici-repentis have a significant yield decreasing effect. With appropriate, well-selected fungicides, we were able to keep every leaf diseases well in hand, and the rate of infection was almost independent of the influence of the breeding year. -
The significance of biological bases in maize production
61-65Views:159The comparative trial has been set up in the Demonstration Garden of the Institute of Crop Sciences of the University of Debrecen, Centre for Agricultural and Applied Economic Studies, Faculty of Agricultural and Food Sciences and Environmental Management in 2012, with 24 hybrids with different genetic characteristics and growing periods. The soil of the trial is lime-coated chernozem, with a humus layer of 50–70 cm.
The weather of the trial year was quite droughty; the monthly average temperature was 3–4 oC higher than the average of 30 years. High temperature, together with lack of precipitation occurred during the most sensitive phenophases of maize (flowering; fecundation, grain saturation).
The following characteristics have been observed: starting vigour, date of male and female flowering, plant and cob height, dry-down dynamics during maturation and the change of yield composing elements has also been quantified. The yield was recalculated to 14% moisture content grain yield after harvesting.
The beginning of the growing period was advantageous, therefore the analysed hybrids could grow a high (above 300 cm) and strong stem. The yield of the hybrids changed between 10.33 and 11.87 t ha-1, but as a result of the unfavourable climatic extremes, their genetic yield potential prevailed only at a rate of 30–40%. However, moisture content by the time of harvesting was good despite its early date (12th September); it remained under below 14% in most cases. Dry-down was measured on a weekly basis between 14th August and 5th September.
The analysis of the qualitative parameters of the maize hybrids (protein %, oil % and starch %) resulted in significant differences. The most significant difference has been observed in the case of protein content (LSD5%=2.01). Oil content was the most advantageous in the case of hybrids belonging to the mid-late growing group (FAO 400). The X9N655 and 36V74 hybrids had the highest oil content (around 4%), while hybrids P9915 and 37F73 had significantly lower oil content. Starch content was above 70% in the case of every hybrid.
Hybrid selection is highly important in terms of yield and yield security of maize, as well as the application of modern biological fundamentals and hybrid specific technology for the improvement of the level of cultivation technology.
-
Examination of Hybrid-specific nutrient supply at corn on chernozem soli
91-95Views:120The effect of increasing fertilizer dosages on the yield of eight different maize hybrids (SY Ondina, NK Kansas, NK Lucius, NK Octet, NK Thermo, SY Flovita, SY Brillio, NX 47279) has been investigated in the crop-year of 2011. According to our results it can be stated that contrarily to the control treatment the application of different nutrient-levels has resulted a significant yield increment (2 000–5 800 kg ha-1).
Based upon the results of this experiment we have drawn the conclusion that the nutrient level of 120 kg N+PK was the optimal for the investigated hybrids. The highest yield (14 475 kg ha-1–15 963 kg ha-1) of the hybrids with different genotypes has been produced in case of this fertilizer treatment. With the comparison of the control and the optimum-fertilizer treatments the yield-increasing effect of mineral fertilization and the different reaction of hybrids towards increasing fertilizer dosages have been proven. In case of the control treatments the best-yielding hybrids were NK Thermo (11 917 kg ha-1) and NX 47279 (11 617 kg ha-1). Contrarily on the optimal nutrient supply level the hybrids SY Brillio (15 876 kg ha-1) and NX 47279 (15 963 kg ha-1) have produced the highest yields. Summarizing, we can state that the hybrid NX 47279 has resulted stable and high yields in the fertilized treatments. Analysing the yield-increasing effect of 1 kg fertilizer active substance it was proven, that the hybrids SY Flovita (45.43 kg ha-1), SY Brillio (44.47 kg ha-1) and NX 47279 (42.33 kg ha-1) had a good reaction towards even lower nutrient supply levels as well. In case of the control treatment the average water utilization coefficient of the hybrids was significantly lower (35.2 kg mm-1), than in case of the optimal nutrient supply level (N120+PK) treatments (48.9 kg mm-1).
Therefore the hybrid specific difference between the water utilization of genotypes could be revealed. -
The Effect of Plant Density on the Yield of Sunflower Hybrid’s in 2001-2002
184-189Views:89Nowadays, for increasing efficiency of sunflower production treating hybrid-specific technologies was required. Increasing of hybrid choice gave reasons for trials in respects of critical factors, as well as in case of genotype-enviroment interactions. The effect of changing plant density show up as determinant factor which affects on yield as well as on plant hygienic conditions. Trials were established on calcareous chernozem soil (Hajdú-Bihar county), in 2001-2002. The field trials were randomized, in four repetition on small parcels. The plant density trials were established in 35.000-75.000 plant/hectar interval using a scale of 10.000 plant/hectar. 10 hybrids were used in both year.
In 2001, 55.000 plant/hectar density was the optimal, in case of most of the hybrids. The yield of tested hybrids did not show significant difference. Yield decreasing effect of using less than optimal density was more significant than in case of using optimal plant density. In 2002, the optimal density was in 45.000-65.000 plant/hectar interval, there was no possibility to find narrower optimum.
Presence of Diaporthe helianthi and the damage caused by the pathogen was significant in 1997-1999, whereas in 2001-2002 the large-scale appearance of the pathogen did not occur. In 2001, the affect of high plant density on disease caused by Diaporthe helianthi showed just tendency-like appearance, in 2002, the infection showed up just in the end of the vegetation period, without significant damage. In spite of the low infection level, the difference between the infection of the diverse plant density treatment was significant. Increasing plant density made increase the frequency of the Diaporthe helianthi infection. The rate of the flower diseases was around 3-16% in 2001, the highest infection level emerged in 65.000-75.000 plant/hectar density, whereas in 2002, the rate of infection level was less than 10%. The increasing plant density helped the development of flower diseases.