Search
Search Results
-
The impact of fertilisation on a few microbiological parameters of the carbon cycle
45-50Views:505The 30 years old long-term experiment of Látókép is continued in our experiments. The long-term fertilization experiment was set in 1983, and our sample was taken in spring 2014. The examinations of soil respiration processes and factors that influence soil respiration are required in optimal management. In our study, we interested to know how the growing levels of fertilization influence the microbial processes under nonirrigated and irrigated conditions in maize mono, bi, and triculture. The experimental results and those statistics suggest that the bi and triculture influenced higher microbial activity which was reflected in number of fungus, soil respiration, and microbial biomass carbon (MBC).
-
Study regarding the influence of the nPK fertilizers use in long term trial on heavy metals concentration in wheat grains
107-109Views:246The paper presents research results obtained in stationary experiments, carried out at Agricultural Research and Development Station Oradea, regarding the influence of nitrogen, phosphorus and potassium fertilizers, on Cd, Pb, Cu, Zn and Ni concentration on wheat grains.
The minimum concentration of cadmium in wheat grains was recorded in the case of the unfertilized plot N0P0K0, 0.12 mg kg-1, and maximum value 0.22 mg kg-1, was registered at the fertilized plot with N160P80K120, relative difference relative to control was 84.2%.
Lead concentration had the lowest value in the unfertilized plot, the value (0.4 mg kg-1) being under the maximum allowed (1.0 mg kg-1). In case of the fertilized plot with N160P80K120, the lead concentration had the highest value, 0.47 mg kg-1, but even in this case it was located beneath the maximum limit allowed.
In all four systems of fertilization, copper has not exceeded the maximum allowed limit (5 mg kg-1), the values have been comprised between 1.68 mg kg-1 at the unfertilized plot and 2.81 mg kg-1 at the fertilized plot with N160P80K120. In other plots of fertilization copper had concentrations of 1.97 mg kg-1, at the fertilized plot with N80P40K40, and 2.78 at the fertilized plot with N80P80K80.
The lowest concentration of zinc, 26.47 mg kg-1, has been registered in the control N0P0K0. In the other fertilization plots studied, the zinc concentrations had the following values: 27.66 mg kg-1 (N80P40K40), (N80P80K80) 29.87 mg kg-1 and 33.62 mg kg-1 (N160P80K120).
Nickel has registered the lowest value in the unfertilized plot, 3.47 mg kg-1. The fertilized plot with N160P80K120 had the highest value 4.94 mg kg-1, with 42.39% higher compared to the control N0P0K0.
-
Effects of production factors on the yield and yield component of winter wheat
26-31Views:221The effect of major production factors (forecrop, fertilisation, irrigation, soil cultivation and soil preparation) on the yield components and yield of winter wheat were studied in a long-term experiment set up at the Látókép Experimental Nursery of the Agricultural Sciences Centre of the University of Debrecen. The results of regression analysis led to the following conclusions:
• In our experiments in 2000, after using maize as a forecrop –based on the results of analysis of regression – fertilisation determined the yield.
• After using pea as a forecrop, a N50 P35 K40 kg/ha fertiliser rate led to an economical increase in the yield of winter wheat.
• None of the determinative yield components varied significantly for winter wheat produced after using pea as a forecrop.
• There is a closed, significant correlation between plant height, spike length, plant and spike mass, the number of spikelets and grains per spike after using maize as forecrop. The thousand grain mass is different from the other yield components, because it is not part of the relation system of
those yield components.
• The increased yield of winter wheat after maize has been used as a forecrop is due to the positive change in grain number per spike yield component. -
Soil Fertility Management in Westsik’s Crop Rotation Experiment
34-39Views:218The crop rotation experiment, established by Vilmos Westsik in 1929, is the best known and most remarkable example of continuous production in Hungary. It is still used to study the effects of organic manure treatment, develop models and predict the likely effects of different cropping systems on soil properties and crop yields. Westsik’s crop rotation experiment provides data of immediate value to farmers concerning the applications of fertilisers, green, straw and farmyard manure. The experiment also provides a resource of yield, plant and soil data sets for scientific research into the soil and plant processes which control soil fertility, and into the sustainability of production without environmental deterioration. The maintenance of Westsik’s crop rotation experiment can be used to illustrate the value of long-term field experiments.
-
Preliminary Critical P-limit Values of 0.01 M CaCl2 Soil Test Procedure
18-21Views:267In the last decade, the 0.01 M CaCl2 extraction procedure was tested as a multi-nutrient extractant. In 1995-97, international joint research activities were carried out within the COPERNICUS project. Detailed calibration of conventional and the 0.01 M CaCl2 extraction procedures for pH, Mg and K were published.
The amount of phosphorus extracted using a 0.01 M CaCl2 solution is very low and reflects the intensity parameter of phosphorus bio-availability. As a readily desorbed P fraction of soils can reflect the soil P-supply and the CaCl2-P values are in close correlation with P-fertiliser rates and P balance. However, the effects of various soil characteristics on CaCl2-P values are different and their interpretation is difficult.
Relatively poor correlations were found between amounts of P extracted by conventional and CaCl2 soil test methods and, therefore, P limit values could not be calculated directly. To characterise the soil P supply at different sites, the CaCl2 desorbed P and the adsorbed P in a modified Baker Soil Test were also applied.
Soil test results of Hungarian long-term fertiliser experiments and recommended CaCl2-P limit values, calculated on yield effects and soil characteristics, are discussed. -
Effect of molybdenum treatment on uptake of plant and soil molybdenum content in a field experiment
117-122Views:587Molybdenum is not a well-known microelement, but being a constituent of several important cellular enzymes it is an essential microelement. Molybdenum occurs in all foods, but at very low levels. There does not appear to be any particular foods or types of foods, which in the absence of extrinsic factors, naturally have high levels of molybdenum. However, environmental pollution, from natural or anthropogenic sources, can lead to high level of the metal in plants.
Our study is based on the long-term field experiments of Nagyhörcsök, where different levels of soil contamination conditions are simulated. Soil and plant samples were collected from the experiment station to study the behaviour of molybdenum: total concentration, available concentration, leaching, transformation, uptake by and transport within the plants, accumulation in different organs, phytotoxicity and effects on the quantity and quality of the crop. In this work we present the results of maize and peas and the soil samples related to them.
According to our data molybdenum is leaching from the topsoil at a medium rate and it appears in the deeper layers. In the case of plant samples we found that molybdenum level in the straw is many times higher than that is in the grain, so molybdenum accumulates in the vegetative organs of the plant. The data also show differences in the molybdenum-uptake of cereals and Fabaceae (or Leguminosae). -
Effects of Tillage Systems on Physical Status and Organic Matter Turnover of the Soil
42-45Views:598The cultivation technology for those plant, that play a key role in arable land production need to be renewed in order to reduce production costs and to protect arable land. The modernisation of technologies can only be achieved by applying appropriate tillage systems. Our measurements were carried out on chernozem soil with lime deposits at the Látókép Experimental Station of the Center for Agricultural Sciences, Debrecen University, in long term tillage experiments set up in 1989. We examined the typical physical parameters, the albedo, field capacity, the bulk density of the soil, organic carbon content (humus %) and the measured pH-values in the water solution within the two tillage variations. We have also modelled nitrogen cycle formation in different treatments.
A significant difference occured between the albedos of the two soils, which may be the result of significant amounts of stem remaining on the surface in the case of the reduced tillage method. The yellow, waxy stem of maize reflects 21% of the sun’s rays, especially at the beginning of the vegetation period, when its decomposition has only just started. This delys the warming up in early spring, which delays the sowing time of maize and reduces evaporation. In the two tillage variations, the water management characteristics do not differ practically, the wilting point field capacity are in accordance. In reduced tillage methods, the so-called „plough-pan” can be well measured at 15-20 cm, while in winter ploughing it is at 30 cm. The humus % of the soil does not differ in the two tillage variations, but due to the difference in bulk density this means a different humus and organic nitrogen content. The organic nitrogen content is greater in the reduced tillage method. On the basis of pH value evaluations, we could not detect significant differences in the two tillage variations. The organic nitrogen content of areas where reduced tillage method was applied is higher than in areas where conventional winter ploughing was applied. -
Harvesting system established for the utilisation of Miscanthus sinensis ‘tatai’ “energy cane” in biomass power plants
143-150Views:265The increasing demand for energy worldwide and the resulting environmental impacts of fossil fuels forced many countries to turn to renewable energy resources as a clean and sustainable alternative. More than a third of Europe’s binding renewable energy source target of 20% by 2020 will come from solid biomass for electricity and heating according to the National Renewable Energy Action Plans submitted by member states of the European Union (EU) to the European Commission. To achieve this goal long-term yield studies in renewable energy plants are important to determine mean annual biomass and energy yield, and CO2 emission. Field experiments worldwide and also in Europe have demonstrated that Miscanthus, a fast-growing C4 rhizomatous grass can produce some of the highest biomass and energy yield per hectare of all potential energy plants. Miscanthus is a plant that originates from the southern slopes of the Himalayas. It was bred for the Hungarian climatic conditions in 2006 under the name of Miscanthus sinensis ‘Tatai’ (MsT). The species has high frost and drought tolerance and high energy value. This is why there is growing demand for the biomass (lignocellulose) produced by growing this plant. The biomass, produced from the high yield energy reed, can be transported to power plants in large quantities, in forms of bales. Its household consumption is not yet significant. This study presents the external features, characteristics, propagation and plantation process of MsT energy reed. The study also demonstrates the harvest technology of the species worked out between 2009–2012 in Tata, Hungary and the options of supplying to biomass
power stations.
-
Examination of drought stress of two genotype maize hybrids with different fertilization
53-57Views:347In the growing season of 2019, we analysed stress resulting from climatic factors on maize hybrids of different genotypes, with the aim of gaining a better understanding of the physiological responses of each hybrid, which might support the elaboration of a cost-effective irrigation plan.
Our experiments were carried out at the Látókép Experimental Station of the University of Debrecen on calcareous chernozem soil in a small-plot long-term field trial with strip plot design. In the scope of the experiment, N-fertilizer doses were applied as basic fertilizer and top-dressing in addition to the non-fertilized (control) treatment. The 60 and 120 kg N/ha doses applied as basic fertilizers in the spring were followed by top-dressing in the V6 phenophase with a +30 kg N/ha dose. Measurements were carried out with the involvement of the Renfor early (FAO 320) and Fornad (FAO 420) late maturity hybrids-
The stomata of the plants became more and more closed with the progression of the phenological phases; their stomatal conductance decreased. However, the hybrids responded differently to environmental stress. In the case of the Renfor hybrid, the highest conductance (669 mmol/m2-s) was recorded in the V12 phenophase with the 150 kg N/ha treatment. The stomata were more open due to the high turgor pressure, allowing plants to evaporate properly. The plant was in its worst physiological condition on 2nd July, at the time of the appearance of the last leaf in the case of the 120 kg N dose (224 mmol/m2-s). The value measured in the V12 phenophase has already shown that the stomata were closing due to the self-regulating system of the plant. It would have been necessary to dispense irrigation water following the measurement. This confirms the finding that water stress can be prevented by measuring stomatal conductance.
In the case of the Fornad hybrid, stomatal conductance was the highest on 12th June (630 mmol/m2-s) in the 90 kg N/ha treatment and it was the lowest (183 mmol/m2-s) in VT (emergence of the last leaf) phenophase in the 60 kg N/ha treatment. In this case, the appropriate time for applying irrigation water would have been early July, when the conditions for the plants were still adequate. Subsequently, the stomata began to close due to a reduction of the water resources available to them.
There was a significant correlation between soil moisture and stomatal conductance, as well as between temperature and stomatal conductance.
-
Growth and clorophyll content dynamics of winter wheat (Triticum aestivum L.) in different cropyear
101-105Views:251The experiments were carried out at the Látókép experimental station of the University of Debrecen on chernozem soil in a long term winter wheat experiment in the season of 2011 and 2012 in triculture (pea-wheat-maize) and biculture (wheat-maize) at three fertilisation levels (control, N50+P35K40, N150+P105K120). Two different cropyears were compared (2011 and 2012).
The research focused on the effects of forecrop and fertilisation on the Leaf Area Index, SPAD values and the amount of yield in two different cropyears. We wanted to find out how the examined parameters were affected by the cropyear and what the relationship was between these two parameters and the changes of the amount of yield.
Examining the effects of growing doses of fertilizers applied, results showed that yields increased significantly in both rotations until the N150+PK level in 2011 and 2012. By comparing the two years, results show that in 2011 there was a greater difference in yields between the rotations (7742 kg ha-1 at N150+PK in the biculture and 9830 kg ha-1 at N150+PK in the triculture). Though wheat yields following peas were greater in 2012, results equalized later on at N150+PK levels (8109–8203 kg ha-1).
Due to the favorable agrotechnical factors, the leaf and the effects of the treatments grown to a great extent in 2011, while in 2012 the differences between treatments were moderate. Until the N150+PK level, nitrogen fertilisation had a notable effect on the maximum amount of SPAD values (59.1 in the case of the biculture and 54.0 in the triculture). The highest SPAD values were measured at the end of May (during the time of flowering and grain filling) in the biculture. In the triculture, showed high SPAD values from the beginning. The same tendency could be observed in the 2012 cropyear, although increasing doses of fertilizers resulted in higher SPAD values until N150+PK level only from the second measurement. Maximum SPAD values were reached at the end of May in both crop rotation system
-
Effects of the cropyear and the agronomical factors on agronomical elements of different sweet corn (Zea Mays L. convar. saccharata Koern.) genotypes in long-term experiment
105-110Views:242In the crop season of 2010 (rainy year), we studied the effect of three agrotechnical factors (sowing time, fertilization, plant density) and four different genotypes on the agronomical characteristics of sweet corn on chernozem soil in the Hajdúság. The experiments were carried out at the Látókép Experimental Farm of the University of Debrecen. In the experiment, two sowing dates (27 April, 26 May), six fertilization levels (control, N30+PK, N60+PK, N90+PK, N120+PK, N150+PK) and four genotypes (Jumbo, Enterprise, Prelude, Box-R) were used at two plant densities (45 thousand plants ha-1, 65 thousand plants ha-1). The amount of precipitation in the season of 2010 was 184 mm higher, while the average temperature was 0.8 oC higher in the studied months than the average of 30 years. Weather was more favourable for sweet maize at the first sowing date, if we consider the yields, however, if we evaluate the agronomical data and yield elements (number of cobs, cob length and diameter, the number of kernel rows, the number of kernels per row) it can be stated that the size of the fertile cobs was greater at the second sowing date due to the lower number of cobs. The largest number of fertile cobs was harvested in the case of the hybrid Enterprise (72367.9 ha-1) in the higher plant density treatment (65 thousand ha-1) at the fertilization level of N120+PK when the first sowing date was applied. The largest cobs were harvested from the hybrid Box-R (cob weight with husks: 516.7 g, number of kernels in one row: 45.7) at the lower plant density (45 thousand plants ha-1) in the second sowing date treatment. Cob diameter and the number of kernel rows were the highest for the hybrid Prelude.