Keresés

Keresési eredmények

• Simulation Aspects of the High Pressure Die Casting Process

  521-529

  Bubenkó Marianna

  Molnár Dániel

  Megtekintések száma:

  100

  High pressure die casting (HPDC) is a manufacturing process for producing accurately dimensioned, sharply defined, smooth or textured surface metal parts. It is accomplished by injecting liquid metal at fast velocity and under high pressure into reusable steel dies. Compared to other casting processes, die casting is at the top end of both velocity and pressure. The high velocity translates into a very turbulent flow condition. The process is often described as the shortest distance between raw material and the finished product.

• The Effect of the Excess Titanium Content on the Microstructure of Al – Si Foundry Alloys

  12-20

  Bubenkó Marianna

  Fegyverneki György

  Molnár Dániel

  Tokár Mónika

  Megtekintések száma:

  135

  Grain refining is an important technological step for the nucleus growth of the melt, in order to increase the number of nuclei, to improve mechanical properties (tensile strength, yield strength, hardness, elongation), feeding conditions and to decrease the tendency of hot tearing and the degree of sintering. [1][2] The aim of the experiments was the determination of the grain refining effects of titanium (Ti) addition in the form of AlTi5B1 master alloy to the examined alloys (AlSi7MgCu0.5 – AC 42 000, AlSi9Cu3Fe0.5 – 46 500; AlSi9Cu1 – AC 46 400). The results prove that the addition of small amount of master alloy has a favourable effect on the foundry practice.