Efficiency of the Machining Process of Circular Shapes by Electrical Discharge Technology
Szerzők
Megtekintés
Kulcsszavak
Licenc
Copyright (c) 2023 Ľuboslav Straka, Patrik Kuchta
This work is licensed under a Creative Commons Attribution 4.0 International License.
Hogyan hivatkozzuk
Elfogadott 2023-02-20
Publikált 2023-04-30
Absztrakt
Due to its high machining precision, EDM technology is nowadays very important in the production of high-precision parts for various industries. The high precision of the machined surface in combination with the ability to machine circular surfaces brings, in addition to several advantages, some negatives. The most significant negative of this machining technology is the relatively low productivity as well as the overall production efficiency. The latter is affected by many accompanying phenomena. The main accompanying phenomenon that contributes to the decline in the overall economic efficiency of EDM is the microgeometry errors that occur due to the non-homogeneity of the EDM process. Another accompanying negative phenomenon is the geometric accuracy errors of the machined surface, as a consequence of systematic destruction of the wire tool electrode, faulty interpolation in its guidance, and, last but not least, its vibration. These aspects consequently lead to the requirement for multiple applications of additional finishing cuts, which significantly reduces the overall economic efficiency of the machining process. Therefore, the experimental research aimed to search for options that can effectively help to achieve higher productivity but especially the overall economic efficiency of the machining process.
Hivatkozások
- S. Dzionk, M.S. Siemiatkowski, Studying the effect of working conditions on WEDM machining performance of super alloy Inconel 617, Machines, 2020, 8(3), 54, ISSN 2075-1702.
- S. Hamed, L.A. Al-Juboori, V.N. Najm, A.M. Saleh, Analysis the impact of WEDM parameters on surface microstructure using response surface methodology, Proceedings of the ASET 2020, Advances in Science and Engineering Technology International Conferences, Dubai, United Arab Emirates, 4-9 February 2020, 9118208.
- S. Hašová, Ľ. Straka, Design and verification of software for simulation of selected quality indicators of machined surface after WEDM, Academic Journal of Manufacturing Engineering, 2016, 14(2), 13-20, ISSN 1583-7904.
- B. Jabbaripour, M.H. Sadeghi, S. Faridvand, M.R. Shabgard, Investigating the effects of EDM parameters on surface integrity, MRR and TWR in machining of Tie6ALe4V, Machining Science and Technology, 2012, 16, 419-444, ISSN 1091-0344.
- Y.C. Lin, Y.F. Chen, C.T. Lin, H.J. Tzeng, Electrical discharge machining (EDM) characteristics associated with electrical discharge energy on machining of cemented tungsten carbide, Materials and Manufacturing Processes, 2008, 23, 391-399, ISSN 1042-6914.
- J. Mascenik, S. Pavlenko, Determination of stress and deformation during laser welding of aluminium alloys with the PC support, MM Science Journal, 2020, 2020, 4104-4107, ISSN 1803-1269.
- A. Mičietová, M. Neslušan, M. Čilliková, Influence of surface geometry and structure after non-conventional methods of parting on the following milling operations, Manufacturing Technology, 2013, 13(2), 199-204, ISSN 1213-2489.
- K. Mouralova, R. Zahradnicek, P. Houska, Evaluation of surface quality of X210Cr12 steel for forming tools machined by WEDM, MM Science Journal, 2016, 5, 1366-1369, ISSN 1803-1269.
- A. Panda, V.M. Anisimov, V.V. Anisimov, K.O. Diadiura, I. Pandova, Increasing of wear resistance of linear block-polyurethanes by thermal processing methods, MM Science Journal, 2021, 10, 731-4735, ISSN 1803-1269.
- M. Pollak, M. Kocisko, A. Basistova, S. Hlavata, Production of fiber as an input material for the 3D printing process, MM Science Journal, 2021, 6, 4414-4419, ISSN 1803-1269.
- B.B. Pradhan, M. Masanta, B.R. Sarkar, B. Bhattacharyya, Investigation of electro-discharge micro-machining of titanium super alloy, International Journal of Advanced Manufacturing Technology, 2009, 41, 1094-1106, ISSN 0268-3768.
- A.K. Rouniyar, P. Shandilya, Fabrication and experimental investigation of magnetic field assisted powder mixed electrical discharge machining on machining of aluminum 6061 alloy, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2019, 233, 2283-2291, ISSN 2041-2975.
- J.A. Sanchez, J.L. Rodil, A. Herrero, L.N.L. De Lacalle, A. Lamikiz, On the influence of cutting speed limitation on the accuracy of wire-EDM corner-cutting, Journal of Materials Processing Technology, 2007, 182, 574-579, ISSN 0924-0136.
- Ľ. Straka, I. Čorný, J. Piteľ, S. Hašová, Statistical Approach to Optimize the Process Parameters of HAZ of Tool Steel EN X32CrMoV12-28 after Die-Sinking EDM with SF-Cu Electrode, Metals, 2017, 7(2), 1-22, ISSN 2075-4701.
- Ľ. Straka, I. Čorný, Identification of geometric errors of circular profiles at WEDM caused by the wire tool electrode vibrations and their reduction with support of acoustic emission method, Engineering Failure Analysis, 2022, 134, 1-18, ISSN 1350-6307.
- Ľ. Straka, J. Piteľ, I. Čorný, Influence of the main technological parameters and material properties of the workpiece on the geometrical accuracy of the machined surface at WEDM, The International Journal of Advanced Manufacturing Technology, 2021, 115(9-10), 3065-3087, ISSN 0268-3768.
- Ľ. Straka, I. Čorný, Adjustment of Wire Vibrations in Order to Improve Geometric Accuracy and Surface Roughness at WEDM, Applied sciences, 2021, 11(11), 1-17, ISSN 2076-3417.
- R. Świercz, D. Oniszczuk-Świercz, Experimental Investigation of Surface Layer Properties of High Thermal Conductivity Tool Steel after Electrical Discharge Machining, Metals, 2017, 7, 550, ISSN 2075-4701.
- J. Wang, J.A. Sánchez, B. Izquierdo, I. Ayesta, Experimental and numerical study of crater volume in wire electrical discharge machining, Materials 2020, 13, 577, ISSN 1996-1944.
- M.T. Yan, P.W. Wang, J.C. Lai, Improvement of part straightness accuracy in rough cutting of wire EDM through a mechatronic system design, International Journal of Advanced Manufacturing Technology, 2016, 84, 2623-2635, ISSN 0268-3768.
- W. Zhang, X. Wang, Simulation of the inventory cost for rotable spare with fleet size impact, Academic Journal of Manufacturing Engineering, 2017, 15, 124-132, ISSN 1583-7904.
- Z. Zhu, D. Guo, J. Xu, J. Lin, J. Lei, B. Xu, X. Wu, X. Wang, Processing Characteristics of Micro Electrical Discharge Machining for Surface Modification of TiNi Shape Memory Alloys Using a TiC Powder Dielectric, Micromachines, 2020, 11, 1018, ISSN 2072-666X.
- W. Zhang, X. Wang, Simulation of the inventory cost for rotable spare with fleet size impact, Academic Journal of Manufacturing Engineering, 2017, 15(4), 124-132, ISSN 1583-7904.