Search
Search Results
-
Decreasing Energy and Water Use in the Meat Industry
24-28Views:80The technology supervisions are needed from time to time in order to involve the new research results, experience, new technologies and equipments organising principles into the production and to make it cheaper and with less expenditure to increase the profitability and competitiveness. In the course of our investigation we aimed the analysis of the traditional technologies and improving of it. In this article we detail the heat treatment curing process. We applied the principles of experimental design for the determination the main influencing parameters in the processes. Then we made simulations and modelling in seeking for the environmentally better technology programs. We developed a method for measuring the temperature development of products with small diameter using the similarity theory in unit operation. In the course of the analysis of the heat treatment processes we could state that the heat treatment time can be reduced significantly by decreasing the size of the product and choosing the right ratios among the surface heat transfer intensity, ambient temperature and involving the lethality obtained during the cooling phase. The total sparing were about 10-20%. We solved the problem associated with the sensor placement error using a plastic material (metamid). We establish a curve between the real product temperature and plastic rod temperature by which the monitoring of the process became more accurate. We determine the size modification for different product sizes. In case of curing we observed very similar phenomena. For the determination of the diffusion coefficient we adopted the Ball-method not using in this field till today. We could reduce the excess saltiness and loss of NaCl with about 5%.
-
Microbial assessment of potential functional dairy products with added dried herbs
59-63Views:137The market of dairy products is a dynamically developing sector of the food industry. Potential, functional dairy products, made by adding herbs or spices, will have antimicrobial and antioxidant effect due to the active biochemical agents of the plant additives. Furthermore, these active components will widen the storage life of food products and enhance their organoleptic properties too. We worked out a technology for creating fresh cheeses using a gentle pasteurizing method by treating the mixture of raw milk and 1.5% fat contained in commercial milk. As herb additives, we used citronella (Melissa officinalis), and peppermint (Mentha x piperita) harvested by us and dried them via Tyndall-method in convective dryer on 40 °C for 5.5 hours per day. The drying period took three days. We bought dried citronella and mint from the supermarket, which were dried by ionizing radiation, to compare the microbiological pollution with the herbs dried by us.
The main target of this research was to create a microbiologically stable, potential functional dairy product. However, because of the bad quality of the raw milk and the gentle heat treatment we used for sterilizing bulk milk, or else, cheeses were not safe for human consumption. As a consequence, we need further studies to modify our technology and get a microbiologically stable product.
-
Heat treatment and microbial digestion of poulty feather for biogas production
215-219Views:162The aim of this research was the elaboration of the technological parameters of heat pre-treatment and microbial digestion of poultry feathers for biogas production. Feathers were treated at 70, 100, 140 °C, and subsequently digested by Bacillus licheniformis, or keratin disintegrator bacteria. Investigations focused on the optimalization of parameters influencing poultry feather biodegradation. The optimal range of pH, temperature,
feather size and bacillus:feather ratio were determined in the experiments, as well as the analysis of relationship between the examined parameters. In order to be able to track the dynamics of the biodegradation, we determined the extinction level of the liquid phase of the biodegraded material in the different experimental treatments. The results showed that the rate of hydrolysis was significantly higher in the treatments with bacteria than in the treatments without it. Regarding the pretreatments at 70, 100 and 140 °C, the digestion of feather was the most intensive at 70 °C. The most extensive digestion was observed in case of 1:3 feather:water ratio. The highest intensity of feather digestion was
detected in the treatment with 1% microbe ratio. -
Physical and chemical treatment of poultry feather from the slaughter-house
51-56Views:92The 15-20% of the by-products of meat – and poultry industry – that unsuitable for human consumption – contains keratin. The slaughter technology of poultry produces large amount of poultry feather with 50-70% moisture content. This means more million tons annually worldwide (Williams et al., 1991; Hegedűs et al., 1998). The keratin content of feather can be difficulty digested, so physical, chemical and/or biological pretreatment is needed in practice, which has to be set according to the utilization method.
Our applied treatments were based on biogas production, which is a possible utilization method. In the IFA (TULLN) Environmental Biotechnology Institute the feather was homogenized, and – according to the previous examinations – the most effective 1:2 feather-distilled water ratio or 1% NaOH-solution was used, and then treated with microwave (70, 130, 160 °C) during 1 hour time period. DM% and oDM% content was analyzed in the original samples, and the pH, Carbon-, Nitrogen-content in the output, too. Based on the received correlation coefficients (R) and related significance values (Sig.) I concluded, that the C-, N-content and the pH values weren’t influenced by any of the additives. The temperature
affected all three tested factors. The temperature showed a strong coherency with the N-content and the pH value when distilled water was used and weak-medium coherency with the Carboncontent. With NaOH-solution treatment the temperature gave strong coherency with the C- and N-content, as well as medium coherency with the pH. Our objective was to determine the method with effectively the pre-treating of poultry feather for biogas production or composting and to prepare of the treated samples for N and C analyzing. Our next aims will be the elaboration of the technological parameters of heat pre-treatment and microbial digestion of poultry feather for biogas production. -
Tulip bulbs preparation by heat treatment for forced culture in green house
70-72Views:107Tulip can be grown in parks as ornamental plant and cut flowers, or possibly in protected areas for cut flowers during winter and early
spring.
An important condition for the successful cultivation of tulips is the quality of the bulbs that are going to be planted and their
biological preparation.
Under the quality aspect bulbs have to be uniform and large, preferably with circumference greater than 11 cm and must have good
phytosanitarical status.
Preparation of organic bulbs for ensuring the continuation of the differentiation process of germs (floral), is made during the storage.
It is known that the preparation of organic bulbs are made in interaction with environmental factors, among which temperature plays an
important role. At the beginning and throughout the process of biological preparation, temperature is maintained at a higher level then the
temperature must be low until planting.
The temperature level and the duration of treatment varies by followed objective respectively early or late flowering and staggered
flowers production over a longer period of time.