Search
Search Results
-
The examination of poultry feather digestility for biogas production
113-118Views:109The aim of this research was the elaboration of the technological parameters of biological digestion and biogas production from poultry feather produced in large quantities by slaughterhouses. Feather protein was digested by Bacillus licheniformis, keratin desintegrator bacteria. Investigations focused on the optimalization of parameters influencing poultry feather biodegradation. The optimal range of pH, temperature, feather size and bacillus:feather ratio were determined in the experiments as well as the analysis of relationship between the examined parameters. In order to be able to track the dinamics of the biodegradation, we determined the extintion level of the liquid phase of the biodegraded material in the different experimental treatments. The results showed that the rate of hydrolisis was significantly higher in the treatments with bacteria than in the treatments without it. The most extensive digestion were observed in case of 1:3 feather:water ratio. The highest intensity of feather digestion were detected in the treatment with 1% microbe ratio.
-
Biomass production estimation of processing tomato using AquaCrop under different irrigation treatments
131-136Views:215The wiser usage of irrigation water is inevitable in the future. Irrigation has very high input cost; therefore, farmers must carry out irrigation with care. Also, the effect of irrigation on crops has a big role in decision making. Modeling provides a possibility to evaluate this effect. AquaCrop, as a crop production simulation model has great potential in this field. The accuracy of tomato biomass yield prediction of the model was tested in this research. For collecting the necessary data, a field experiment was conducted at Szarvas on processing tomato with different water supplies, such as 100% (I100), 75% (I75), 50% (I50) of potential evapotranspiration and a control with basic water supply (C). The relation of the simulation and actual biomass yields was evaluated during the season. Very good correlation was found between the modelled and the actually harvested data. The data for the control and I100 treatments showed higher correlation than the I75 and I50. The relationship for all of the data was moderately strong. Miscalculations occur mostly when the dry biomass yield reaches
7 t ha-1. The accuracy of the model was evaluated with the use of mean absolute error (MAE) and root mean squared error (RMSE) values. The least error was found in the C treatment, which means 0.34 MAE and 0.45 t ha-1 RMSE. The simulation resulted in higher errors in the I75 and I50 treatments. -
Pre-treatment of wastes containing keratin in industrial conditions
59-64Views:162The aim of the research was a development of a featherdegradation technology in industrial circumstances. During the experiments we determined the parameters of the critical environmental and technological limitation factors. Because of the high keratin-content the degradation (and composting) of the feather is difficult. With the developed technology huge mass of feather can be used fast and easily in biogas production and in the adjustment of the optimal element ratio of biomass. The industrial experiments were implemented in a 6m3 heatable double-walled
tank with stirring-shovels and aeration-system. The degradation process was followed with extinction measurements.
According to the experiments that were done the best results were given at the case which was heat-treated at 70°C, was injected with 1% bacteria concentration, and where 1:3 feather:water ratio was set if we consider the effectiveness of degradation and the hydraulical retention time. -
Product orientated sewage sludge composting technologies in the practice of AKSD Ltd.
33-36Views:145In recent years the regulations of the EU unambiguously determine that the biodegradable wastes should be used for biogas production or composting. The direct use of sewage sludge in agriculture is limited by its hazardous microelement content, but it can be used effectively in composting. The limitation parameters can be extinguished with correct compost-mixture and technology variants. The exact determination of the technologies and mixtures result a stable, constant quality product. The compost, as a classified product, is friable structured. The end-product is a
homogeneous mould with good water capacity, does not contain any weed seeds and pathogenic organisms. The compost does not have a acidify effect on the soil. It is an effective fertilizer thanks to its macro and microelement content. -
The Role of the Digital Terrain Models in the Assessment of Surplus Water Risk at the Szolnok-Túri Plain
47-51Views:136The environmental factors to which surplus water can be assigned (topography, soil, groundwater, vegetation etc.) can be subject to special analysis and the randomness of the occurrences can be limited. The results of these procedures are surplus water risk maps of the areas, which can be utilised in land use planning. The risk map of the research site was created with overlaying digital category maps of the determining factors (hydraulic conductivity, convexity, critical probability of ground water level and land use).
-
The examination of relation between the C/N ratio and the biogas yields in the Regional Biogas Plant of Nyírbátor
63-68Views:122The Regional Biogas Plant of Nyírbátor was built by the Bátortrade Ltd. The biogas plant contains 6 mezophil and 6 thermophil fermentation tanks, because the biogas production is based on mixed compositions. The regional plant is a multifunctional system. It produces agricultural products and biogas with high methane content. The utilization of biogas is also accomplished here; gas-engines transform it to electricity and
heat-energy. The product electricity is used by the local plants, the surplus is sold.
The aim of the research is the examination of the quality and quantity of the input materials that put into the mixers and follow the seasonal, periodical and optional changes of the input materials. The analyzation of the quality and quantity data can give an answer to the optional changes of biogas production because the input materials determine the composition of the examined recipe. The C/N ratio was between 11-13, the maximal value of the biogas yield was observed by 12.35 C/N ratio. -
Heat treatment and microbial digestion of poulty feather for biogas production
215-219Views:148The aim of this research was the elaboration of the technological parameters of heat pre-treatment and microbial digestion of poultry feathers for biogas production. Feathers were treated at 70, 100, 140 °C, and subsequently digested by Bacillus licheniformis, or keratin disintegrator bacteria. Investigations focused on the optimalization of parameters influencing poultry feather biodegradation. The optimal range of pH, temperature,
feather size and bacillus:feather ratio were determined in the experiments, as well as the analysis of relationship between the examined parameters. In order to be able to track the dynamics of the biodegradation, we determined the extinction level of the liquid phase of the biodegraded material in the different experimental treatments. The results showed that the rate of hydrolysis was significantly higher in the treatments with bacteria than in the treatments without it. Regarding the pretreatments at 70, 100 and 140 °C, the digestion of feather was the most intensive at 70 °C. The most extensive digestion was observed in case of 1:3 feather:water ratio. The highest intensity of feather digestion was
detected in the treatment with 1% microbe ratio. -
New methods of compost homogeneity determination in sewage sludge based compost prisms
49-52Views:184There is no effective method of homogeneity measurement of compost prism. The most frequently used technology is the examination of the particle distribution. This method needs a lot of time and large number of samples. The aim of our research is establishing different effective methods to determine the homogeneity of compost prisms. During our work, we examined the homogeneity of a prism made of sewage sludge and saw-dust mixture.
The measurements were based on the different properties of raw materials. According to this we examined the homogeneity by moisture content, heavy metal content and gas distribution measurements.
The most effective method is the measurement of gasconcentration. Although gas-concentration measurements it need special equipment it has more advantages than the other methods. The examination of gas-distribution compensates the problem of sampling because the measurement is direct. It provides the opportunity to estimate the amount of emitted toxic gases and to determine the maturity of the compost and the effectiveness of the degradation. -
Assay of runoff conditions using a Digital Elevation Model
124-129Views:146We can get information about water conditions of plane areas by analyzing their relief. By using the Digital Elevation Model, we can get proper information about runoff conditions in the terrain surface, which is the basis for ponding analysis. In our study, a Digital Elevation Model of the sample plot in Hajdúsági-löszhát (loess ridge) was created that makes possible the determination of runoff conditions of the surface. Convergence and divergence of runoff direction showed the rate of ponding and the location of possible inland-water spots. By using this model, concrete location of those areas that tend to be overmoistured could be determined. Knowledge of this phenomenon can be an effective instrument for farmers in optimizing crop growing, and additionally in performing water management interventions in proper time and space.