Search
Search Results
-
Assessing the impact of salinity stress on some morpho-physiological traits of two chickpea genotypes under hydroponic conditions
47-53Views:405Evaluating the performance of crop species to salinity stress is considered an intricate task due to differences in performance, response and susceptibility at different phenological stages of chickpea crop. Assessment of the performance of chickpea genotypes in response to NaCl-induced salinity stress at the initial vegetative phase is of great importance to have a crystal idea about the threshold level of tolerance. An experiment was carried out under hydroponic conditions to evaluate the performance of two chickpea genotypes (ELMO and ORION), in response to different salinity levels (0, 25, 50 and 75 mM NaCl) as factorial arrangement under completely randomized design with three replications. The average of shoot and root dry matter weight was significantly higher for the ELMO genotype at the control treatment (1.143, 0.4133 g respectively), while it was significantly lower in the two genotypes ORION and ELMO at the highest salinity level (0.267 and 0.2700; 0.0433 and 0.0533 g respectively). The root to shoot ratio was significantly higher in both genotypes in the control and the lowest salt level (25 mM NaCl), without significant differences among them (47.98, 43.30, 37.10 and 36.25% respectively). The relative water content and stomatal conductance were significantly higher in the ORION genotype (88.01%; 335.40 mmol m-2 s-1) compared to ELMO (84.09%; 299.10 mmol m-2 s-1), and increasing salinity level caused a proportional decline in both traits, where they were significantly lower at the highest salt level (75Mm) (77.45%; 87.50 mmol m-2 s-1). Results indicate genotypic variability in response to NaCl-induced salinity stress under hydroponic conditions and the physiological traits are more expressive and reliable as selection criteria than morphological ones.
-
The specification of the growing temperature on PDA of chestnut blight pathogen (Cryphonectria parasitica (Murr.) Barr) to optimize timing for biocontrol treatments by hypovirulent strains
29-32Views:479The most destructive pathogen for the European chestnut trees is the blight fungus Cryphonectria parasitica (Murr.) Barr. The biological control is the only effective possibility to apply in situ biocontrol by hypovirulent strains against compatible virulent (wild) fungus strains. The infested bark tissues can inoculate by drilling holes surrounding and putting into agar discs interwoven by the appropriate vegetative compatible group (VCG) hypovirulent fungus strains. This latest can pass those virus-like particles (VLPs) by parasexual contact (called hypha-anastomosis)which responsible to hypovirulence. A laboratory experiment was made to find the optimal times to carry out the treatments. The intensity of growth of fungal colonies were analysed on different temperatures. The growth of the fungus on low temperature were rather slow,according to our expectations. On higher temperature the colony progress were the same as on the optimal 20–25 °C. These observations and the environment determine the date of the field applications under Hungarian weather conditions. It means the optimal treatment periods can be May or end of September to middle October in Hungary.
-
Effect of molybdenum treatment on uptake of plant and soil molybdenum content in a field experiment
117-122Views:698Molybdenum is not a well-known microelement, but being a constituent of several important cellular enzymes it is an essential microelement. Molybdenum occurs in all foods, but at very low levels. There does not appear to be any particular foods or types of foods, which in the absence of extrinsic factors, naturally have high levels of molybdenum. However, environmental pollution, from natural or anthropogenic sources, can lead to high level of the metal in plants.
Our study is based on the long-term field experiments of Nagyhörcsök, where different levels of soil contamination conditions are simulated. Soil and plant samples were collected from the experiment station to study the behaviour of molybdenum: total concentration, available concentration, leaching, transformation, uptake by and transport within the plants, accumulation in different organs, phytotoxicity and effects on the quantity and quality of the crop. In this work we present the results of maize and peas and the soil samples related to them.
According to our data molybdenum is leaching from the topsoil at a medium rate and it appears in the deeper layers. In the case of plant samples we found that molybdenum level in the straw is many times higher than that is in the grain, so molybdenum accumulates in the vegetative organs of the plant. The data also show differences in the molybdenum-uptake of cereals and Fabaceae (or Leguminosae). -
The effect of sowing date and plant density on the yield of maize (Zea mays L.) under different weather conditions
205-208Views:744Maize has high productivity and produces huge vegetative and generative phytomass, but this crop is very sensitive to agroecological (mainly to climatic, partly to pedological conditions) and agrotechnical circumstances. In Hungary, maize is grown on 1.1–1.2 million hectares, the national average yields vary between 4–7 t ha-1 depending on the year and the intensity of production technology. The longterm experiment was set up in 2015–2016 on chernozem soil in the Hajdúság (eastern Hungary). The maize research was set up on chernozem soil at the Látókép MÉK (Faculty of Agricultural and Food Sciences and Environmental Management) research area of the University of Debrecen. We examined the following commonly used hybrids of Hungary: SY ARIOSO (FAO 300), P9074 (FAO 310), P9486 (FAO 360), SY Octavius (FAO 400), GK Kenéz (FAO 410), DKC 4943 (FAO 410). The experiment was set up in three different plant densities. These were 60, 76, 90 thousand plant ha-1. The experiment was set up with three different sowing dates, early, average and late sowing. The yield was measured using a special plot harvester (Sampo Rosenlew 2010), measuring the weight of the harvested plot and also taking a sample from it. As a next step, we calculated the yield (t ha-1) of each plot at 14% of moisture content to compare them to each other. We evaluated the obtained data using Microsoft Excel 2015.
-
Effect of M9, MM106 and Seedling Rootstocks on Sunburn-Sensitivity of 33 Apple Cultivars, and Sunburn Effects on Fruit Quality
236-247Views:333The purpose of this study was to investigate the sunburn-sensitivity of 33 apple cultivars grafted onto 3 rootstocks (M9, MM106 and seedling) in a commercial orchard at Nagykutas (in the western part of Hungary). The authors also searched for any relationship between fruit quality parameters and the frequency of sunburn on the fruit surface.
During the observations, the cultivars had rootstock-specific properties in respect to sunburn-susceptibility. Accordingly, the injury decreased in the order M9, MM106 and seedling rootstocks. The differences in the sensitivity were founded on the foliage-morphological characteristics of trees, caused by the growing vigour of the rootstocks. Accordingly, the highest value of sunburn injury was observed on M9 rootstock, because this rootstock has a dwarfing effect on the grafted main cultivars. Thus, the vegetative area of these trees grew very slowly and the foliage was not compact enough to protect the fruits from the strong rays. The largeness and density of the foliage increased in the order M9, MM106 and seedling rootstocks. Relationships were also demonstrated between the diameter of the upper part of crown, the size of leaves, the number of fruits per tree and the injury from sunburn.
The damage values showed, that the gravity of symptoms did not decrease below a well-defined level of dimension on fruit. Determined potential area of injury was necessary for the symptoms to become visible.
The authors categorized the cultivars in the respect of values of sunburn frequency: I. „Not sensitive”, II. „Moderately sensitive” and III. „Very sensitive” categories were constituted. Generally, the Gala cultivars showed low damage (or were free of symptoms), in contrast, Golden mutants suffered relative strongly. The most sensitive cultivar was Jonica on all three of rootstocks.
We searched for any relationship between the fruit quality parameters and the frequency of sunburn. A significant correlation was found in the cases of fruit weight and colour-coverage. The latter can be related to that fact that highly colour covered fruits are found on the peripherial part of crown, so these are exposed to stronger sun rays -
Comparative analisis of different canopy forms of sweet cherry cultivars
19-22Views:302The Hungarian sweet cherry production has been changed significantly in the last decades, which primarily resulted in growing intensity of the orchards. Due to the favourable selling prices of the sweet cherry many growers see good prospects in this fruit. One of the key questions of their success is the choice of the most proper canopy form according to the growing conditions, which facilities the efficient completion of annual technological operations.
In new orchards almost exclusively variations of spindle canopies are established, although many other crown forms are used all over the world. From the point of the domestic sweet cherry production it is indispensable to get information about these canopies, and compare with the prevailing crown forms with central axis.
In our experiment we compared free spindle and bush canopies in the Horticultural Experimental Farm of the University of Debrecen in 2013. According to our results it can be stated that the bush canopy can be described with more balanced growth, which makes easier to maintain the vegetative and generative balance. Another positive characteristic of the bush canopy is, that the height of the trees is smaller with 50% compared with the free spindle, which makes the pruning and the harvest easier.
-
Evaluation of chickpea (Cicer arietinum L.) in response to salinity stress
105-110Views:970Soil salinity is a severe and expanding soil degradation problem that affects 80 million ha of arable lands globally. Chickpea (Cicer arietinum L.) is very sensitive to saline conditions; the most susceptible genotypes may die in just 25 mM NaCl in hydroponics. Approximately 8–10% yield loss in chickpea production is estimated due to salinity stress. However, it is still not established why chickpea is so susceptible to salt affection. Salinity (NaCl) impedes germination of seeds, though chickpea varieties considerably differ from one another in this respect. Some chickpea genotypes are more tolerant in the stage of germination, tolerating even 320 mM NaCl. The reasons of this variation are unrevealed; there is a shortage of knowledge about the germination abilities of chickpea genotypes in saline conditions. Nevertheless, the effect of salt stress on vegetative growth can be analysed in hydroponics, in pot or field conditions, regardless the experimental environment, the ranking of genotypes regarding salt resistance is coherent. Chickpea genotypes can be different in their ability to retain water, maybe under salt affection; the more salt tolerant lines can maintain higher water content in the shoots, while the more sensitive ones cannot. The identification of salt tolerant chickpea landraces based on developing genetic variability is a suitable strategy to combat against salinity problems arising in arid and semi-arid areas.
-
Violation prooxidative-antioxidant stability at maize shoots at different level of accumulation of cadmium and nickel
89-94Views:228Joint influence of cadmium and nickel was investigated on the feature of their accumulation by the vegetative organs of 10-days' old maize shoots. It was established that most intensively noted metals are taken in by the roots of shoots in the first 7 hours stressing influencing, while in leaves they appear only after a 7-hour long exposition. It was stated that the absorption process of the noted metals by a root system is carried by two-phase character. The indexes of inner-tissue contamination are calculated. Activating by the cadmium and nickel ions of lipid peroxidation as marker of the stressing influencing, and also was shown the proper increase of intensity of functioning of ascorbate peroxidase as the antioxidant enzyme protection of cell.
-
Evaluation of dry matter accumulation of maize (Zea mays L.) hybrids
35-41Views:1150The increase of the grain yield of maize is closely correlated with its seasonal dry matter accumulation. Dry matter is accumulated into the grain yield during the grain filling period. The following maize hybrids were involved in the experiment: Armagnac FAO 490, Loupiac FAO 380 and Sushi FAO 340. In order to determine dry matter content, two samples per week were taken on the following days: 22nd, 25th, 28th, 31st August, 4th, 7th, 14th, 18th, 22nd, 25th, 29th September and 2nd, 6th, 9th, 13th October. In the course of sampling the weight of 100 grains from the middle section of 4 ears was measured in 4 replications. Dry matter content was determined after drying to constant weight in a drying cabinet at 60 °C. Harvesting was performed on 13th October 2017.
The daily precipitation sum was determined by local measurements, while the daily radiation and temperature data were provided by the Meteorological Observatory Debrecen of the National Meteorological Service in Budapest. Among the agrometeorological parameters, an analysis was made of the precipitation during the growing season, effective heat sums during the vegetative and generative phase, and the water supplies. The daily heat sums were determined using the algorithm proposed.
The amount of precipitation in the winter period before the 2017 growing season was 210 mm. The soil was saturated until its field capacity. The rather dry and warm March and April had a favourable effect, but there was no worthy amount of precipitation until May (51 mm) due to the condition of the dried seedbed. Sowing was performed on the 5th of May 2017 in a randomised small plot experiment. There was favourable precipitation and temperature during the growing season, thereby providing ideal conditions for maize development, growth and yield formation. There was near average amount of precipitation in each year. The total amount of precipitation in the summer period is 342 mm. Temperature was mostly above the average, but there was no long and extremely warm period.
The Armagnac hybrid reached its highest dry matter mass 126 days after emergence. Physiological maturity was reached sooner (on the 119th day) in the case of Loupiac, and even sooner in the case of Sushi (116th day). The thousand grain weight of Sushi (which has the shortest ripening period) was 286 g at the time of physiological maturity, while that of Loupiac was 311 g. Compared to Sushi, Armagnac showed 12 g more dry matter accumulation (306 g). In the case of all three examined hybrids, physiological maturity was preceded by an intensive phase, when the dynamics of dry matter accumulation was rather quick. On average, Sushi gained 2.8 g dry matter per day between 103 days following emergence and physiological maturity, while the same values were 3.2 g for Armagnac and 3.3 g for Loupiac. The aim of the regression line slope is to predict the behavior of the dependent variable with the knowledge of the values and characteristics of the independent variables using the regression line equation. Furthermore, to determine how the location affected the dynamic of dry matter accumulation in the Armagnac, Loupiac and Sushi hybrids. In regression analysis, the coefficient of explanation showed that the effect of day in the Armagnac was 97%, in the Loupiac 94%, in the Sushi 90 %. The determination coefficient (R2) is useful in determing how the regression equation fits. But, as we have seen, the determination coefficient alone is not sufficient to verify the model’s accuracy, in addition to the determination coefficient (R2), the normality of the data or the residuals, the variance of the variables at different levels, the independence of the data relative to time and non-oblique. Observations are evaluated for the correctness of the fitted model.
Dry matter values decreased evenly and slightly following physiological maturity. According to our research results, it was established that physiological maturity is followed by a moderate dry matter loss. Until harvesting, Armagnac lost 40 g of its thousand mass weight in 29 days, while the same value pairs were 69 g in 36 days for Loupiac and 29 g in 39 days for Sushi. Loupiac – which had the highest weight at the time of physiological maturity – lost the most of its dry weight; therefore, Armagnac and Sushi had higher values at the time of harvesting.