Search
Search Results
-
Effect of the plant density on different maize (Zea mays L.) hybrids yields and leaf area index (LAI) values
51-56Views:146We have investigated the plant number reactions of three maize hybrids of various genotypes in a small-plot field experiment. The plant numbers were 50, 70 and 90 thousand ha-1, while the row distances were 45 and 76 cm. The experiment was set on the Látókép Experimental Farm of Centre for Agricultural Sciences of the University of Debrecen in four replications on calcareous chernozem soil.
The assimilation area and the leaf area index have important role in development of the crop yield. The studied three different genotype maize hybrids reached its maximum leaf area index at flowering. The maximum leaf area index increased linearly with increasing plant density. The season-hybrids reached less yield and leaf area index. According to our experimental results, we have concluded that with the decrease of the row spacing, the yield increased in the average of the hybrids. The studied hybrids reached the maximum yield at 70 and 90 plants ha-1 plant density. We determined the optimal plant number that is the most favourable for the certain hybrid under the given conditions.The higher plant density was favourable at 45 cm row spacing than 76 cm. The hybrids reached the maximum grain yield at 45 cm row spacing between 76 712–84 938 plants ha-1, while the optimum plant density at 76 cm row spacing changed between 61 875–65 876 plants ha-1.
The leaf area index values between the applied plant density for the flowering period (July 1, 24), we defined a significant differences. In the archived yields were significant differences at the 45 cm row spacing between 50 and 70, 90 thousand ha-1 plant density, while the number for the 76 cm row spacing used did not cause a significant differences in the yield. There were significant differences between the examined hybrids of yields.
-
Effect of sowing technology on the yield and harvest grain moisture content of maize (Zea mays L.) hybrids with different genotypes
17-22Views:118From the aspect of the efficiency of maize production harvest grain moisture content shall be considered beside the amount of harvested grain yield. Hybrids with different genotypes and vegetation period length lose their moisture content different that is affected by row spacing and plant density – among agrotechnical production factors – depending on the given crop year. In the present research work three crop years with different weather conditions were studied (2013, 2014, and 2015). The small-plot field experiment was set up at the Látókép Field Research Centre of the University of Debrecen, Centre for Agricultural Sciences with four replications on a chernozem soil type. The effect of three factors was analysed in the experiment on yield amount and its moisture content. Factors were row spacing (45 and 76 cm), plant density (50, 70 and 90 thousand plants ha-1), while hybrids were of very early (Sarolta: FAO 290), early (DKC 4014: FAO 320, P 9175: FAO 330, P 9494: FAO 390) and medium (SY Afinity: FAO 470) ripening.
In the crop year of 2013 the highest yield was produced – regarding the average of the hybrids – by the application of a row spacing of 45 cm (4.5%, 673 kg ha-1), however there was no significant difference between the yield of the populations of different row spacings. Significant difference (14.9%, 1751 kg ha-1; 6.3%, 583 kg ha-1) could be found in case of yield between different row spacing applications in 2014 and 2015. The effect of insufficiently distributed low amount of precipitation and lasting heat days in 2015 could be revealed in yield amounts and harvest grain yield moisture content results that were lower than in the previous years. In 2015 grain yield moisture content varied between 10.3 and 13.9% in case of a row spacing of 45 cm, while by 76 cm between 11.0 and 13.9%.
-
The effect of production area on the development of yield producing factors of maize (Zea mays L.) hybrids of different genotypes
67-72Views:125Maize yield amount development is determined by the given crop year and the genotype of the applied hybrid, but beside these also by the applied agrotechnical factors, in particular by sowing technology. The development of yield amount and yield producing factors of five maize hybrids of different genotypes has been studied in a small-plot field experiment by the application of different row spacings and plant density variants. The production of the individual plants shows decreasing tendency parallel to the increasing plant density, however, this decrement is compensated by the higher number of plants per unit production area. Individual plant production is determined by the development of yield producing factors, such as the length and the diameter of cobs, just as by the thousand seed weight – that were studied in the present research work as well.
In the present research work the decreasing row spacing resulted in a yield increment of 0.67 t ha-1 (4.53%) in 2013, while in contrast in 2014 yield was decreased by 1.75 t ha-1 (14.87%). The high amount of precipitation in March was determinant in 2013: it filled up the soil water stock and balanced the negative effect of the inadequate amount and distribution of precipitation during the vegetation period for the yield. Lower extent of yield increment (0.6 t ha-1) was registered in 2014 in case of the row spacing of 76 cm than in the previous year. In case of a row spacing of 45 cm the difference between the two crop years was 3.1 t ha-1. The highest impact on the yield production factors was found in all treatment combinations in case of the applied hybrid among the three studied treatment factors. In the crop year of 2014 the effect of plant density on cob diameter and thousand seed weight could be revealed as well. In case of the cob diameter significant difference was found between the plant densities of 70 000 and 90 000 plants ha-1, just as between the populations with densities of 50 000 and 90 000 plants ha-1. In case of the thousand seed weight significant differences could be found by the application of plant densities of 70 000 and 90 000 plants ha-1. The highest values of the studied yield producing factors were measured in case of the plant densities of 50 000 and 70 000 plants ha-1; increasing the plant density to 90 000 plants ha-1 resulted in rather decreasing values.
-
The relationship between the nutrient supply and the yield of maize hybrids with different genetic traits on chernozem soil in variant years
27-31Views:187The experiments were set on lime-coated chernozem soil in 2013 and in 2014, in our study four hybrids were included with different FAO number. We studied the effect of NPK fertilization and row spacing on the yield. The fertilizer doses were based on a 25-year longterm experiment. Compared to control, the N40 +PK treatment has also achieved a significant yield increase, although some hybrids responsed with yield loss to the increasing fertilizer doses; this effect was observed especially in 2014. The majority of hybrids reached higher yields in both years using the 50 cm row spacing. The water release of hybrids was measured weekly during the maturation, at the same time points. The rainy September slowed ripening and the water release of the hybrids in 2013, so the grain wet content at harvest showed higher values. The moisture contents were increased for some hybrids, in spite of the positive and favorable dynamic of water loss.
-
Examination of the impact of ecological and agrotechnical factors in a maize fertilisation experiment
13-17Views:106The year 2013 was rather extreme breeding year because of the uneven distribution of precipitaion and the summer heat. The experiment was set on with eight different genetic characteristics maize hybrids in 2013. In our study were included different kind of breeding season hybrids. We studied the effect of NKP fertilization and row spacing on the yield. The fertilizer doses are based on 25-year long-term experiment. Compared to control, the N40+PK treatment has also achieved a significant yield increase, although some hybrid of increasing fertilizer doses yield response to loss. The majority of hybrids reached higher yields using the 50 cm row spacing. The water release of hybrids was measured between 21th August and 17th September weekly, at the same time points. The rainy September slowed ripening hybrids and water release, so the grain wet content at harvest showed higher values.
-
Organic soybean production in Hungary
45-52Views:142Organic soy production, particularly for feedstuff in organic animal husbandry, is needed in Hungary and the EU regions. Soybean producing crop area in Hungary has increased in the last years, however, the agroecological potential would allow for a larger soybean production area. This study presents the soybean market in Hungary, and the role of soybeans in protein supply in food and feed, summarising the critical elements of organic soybean production from variety selection to marketing. During the field research, the effects of the agronomical environment on yield potential factors were examined. We aimed to determine how different row spacing and tillage systems affect organic soybean yields of different varieties, with particular attention to the dry region, and determine the specific methods and varieties of soybean that favour these areas. We found that the tillage (plough/grubber), the spacing (wide/narrow), and the variety effects were all significant on morphological variables. The most remarkable difference was seen in plant height and the number of pods per plant, while the number of nodes was also highly impacted by tillage treatment and variety. The nutrition variables were significantly different, mainly as an effect of tillage and spacing interaction with significantly different plant responses of varieties.
-
The effect of plant density on the yield of sweet potato
125-128Views:349A field study was conducted in South-East Hungary during the main cropping season of 2016, 2017 and 2018, with the objective of determining the effect of plant spacing on the productivity of sweet potato. Production technology experiments of four repetitions were set up in a randomized block design on sandy soil. The performed treatments consisted of four variations of plant spacing (row distance x plant-to-plant distance): 80 cm x 20 cm, 80 cm x 30 cm, 100 cm x 20 cm, 100 cm x 30 cm. The plant material was the Hungarian registered sweet potato variety ‘Ásotthalmi-12’. Analysis of variance revealed that planting density significantly affected the average yield of storage roots. The highest yield per plant was achieved with the 100 cm x 30 cm (2016, 2017), as well as with the 80 cm x 30 cm (2018) setups. On hectare level, our results showed that the highest plant density of 62,500 plants ha-1 (80 cm x 20 cm setup) could give the highest yield. Comparing the highest tons ha-1 results to those achieved with the plant spacing setups resulting in the highest yield per plant, the differences can be even 13 or 14 tons at hectare level. This finding underlines the importance of choosing the proper planting density towards the higher end.
-
Study of plant physiological parameters in winter oilseed rape (Brassica napus var. napus f. biennis L.) production on chernozem soil
111-115Views:185We made plant physiology examinations in Arkaso winter oilseed rape hybrid substance: relative chlorophyll content (SPAD) and leaf area index (LAI) measurements. The experiment was set in University of Debrecen Agricultural Sciences Center at Látóképi Experimental Station in four replications, in two different sowing times (I. sowing date on 08/22/2014 and II. sowing date on 09/09/2014 sowing againhappened because of the incomplete germination in the second subtance 01/10/2014) Three different plant density 200, 350 and 500 thousand ha-1, under the same nutrient supply, 45 cm row spacing. The experiment was green crop of winter wheat. The relative chlorophyll content (SPAD) and leaf area index (LAI) measurements were made in seven different times. We measured the maximum value of chlorophyll content in the first sowing time at 500, and the second sowing time at 350 thousand ha-1 plant density. The measurement results proved that there was a linear relationship between the number of plants and the LAI. The maximum leaf area index values we measured in both the sowing time at 500 thousand ha-1 reached.
-
Mathematical modelling of surface irrigation for field crops in Jordan based on soil hydrological-physical properties
137-148Views:87Jordan suffers from drought and depletion of water resources. In-field crop management, the issue of irrigation scheduling is important and influential. In this research note, a simple method was developed for scheduling surface irrigation of field crops based on inputs of crop ecology, effective root depth, soil texture, soil hydrology, and logical mathematics. It was concluded that the science of mathematics has succeeded to meet academic irrigation scheduling in terms of surface irrigation for field crops based on both soil hydrological and physical traits. Extension scholar has a decision to choose mathematical irrigation model depends on the traditional inputs or updating the model by searching for renewable inputs such as different varieties root depths, optimum row spacing of each crop, drip irrigation mathematical modelling, and digital sensing. In both cases, the input related to the effective root depth is a major and basic factor in mathematical irrigation scheduling. It is, therefore, recommendable that extension research-based systems should focus on basic mathematics to capacitate the complementary role of academics, research, and extension in irrigation modelling, and rural development.
-
Evaluation of the Green bean variety candidate BU-16
75-81Views:72This study presents the results of the variety comparison trials conducted with the French bean variety candidate BU-16 on sandy soil, during two years at the Research Center of the University of Debrecen.
The outstanding characteristics of this variety candidate are the early maturity, the showy pods (yellow, straight, cylindrical cross-section „pencil bean”) and the high yield potential.
The experiments were conducted with a randomized design, with five varieties and four replications. The varieties (of which two are foreign and three are domestic) were as follows: BU-16 fj, Maxidor, Paridor, Hungold and Budai piaci. The individual plots were 2 m wide and 4 m long. The seeds were sown at a density of 30 germs per m2, with a row spacing of 50 cm.
The following parameters were taken: time of flowering, time of green maturity, plant height, height of the lowest pod above ground level, number of pods per plant, distribution of the pods by the state of development (20 plants), usable pod length (1 kg of standard crop-yield), yield per hectare based on the number of plants per plot. The experiments were evaluated statistically with Excel and SPSS softwares.
Results obtained with the variety candidate BU-16:
– The time from the emergence to green maturity is 45 to 46 days, which is short as compared with the other cultivars studied.
– Plant height is 38cm (two years average), which is among the highest ones, together with Paridor.
– The pods are set high above the ground level similarly to Paridor, the height of the lowest pod is 19 cm.
– The average number of pods per plant is 13 (two years average) similarly to Paridor and to Maxidor.
– The distribution of pod size in 2007 is as follows: 68% of the pods of BU-16 is of the standars size, which is a good rate. The value of this trait for the other varieties is 60 to 63%, except for Paridor, the value of which is similar to that of BU-16.
– The usable pod length (10 to 14 cm) is 63% in 2007 and 84% in 2006. Similar pod length rates were obtained for Maxidor, while the rate for Paridor is as high as 91%.
– The total yield and the standard yield of BU-16 is among the highest ones.
According to the results obtained and presented above, the variety candidate BU-16 is the earliest maturing among the varieties tested with high yield potential which, however, is not significantly different from that of the others. Significant differences can only be detected in plant height and the number of pods per plant. Considering the results, BU-16 is to be further tested. -
Effect of sowing time and planting space on change of yield and protein content of white lupine (Lupinus albus L.)
85-89Views:152The hinge of the lupine crop cultivation technology is the sowing time and the determination of the breeding area. According to the literature the early sowing (as soon as possible to go to the soil) and larger growing area is recommended for seed production. Based on the results of our 2 years experiment, the effect of sowing time and different spacing is important on yield of white lupine, and the effect of the sowing time is more significant. A decrease in the yield was observed after later sowings. The yield and the rate of its decreasing was varied in one year and among different years depending on wheather condition and sowing time.
The role of sowing time is significant for protein content of seeds. The average protein content decreased due to the later sowings in 2014, while 2015 the protein content of seeds in early sowing time and of plants sowed 4 weeks later was similar. We measured less protein content in the 2. sowing time sowed 2 weeks later than the first one. In the studied years the average protein content of seeds from different row spaces were not different.
-
The Effect of Forecrop and Plant Protection on the Pathology Parameters and Yields of Winter Wheat
84-89Views:88We carried out our experiment in the cropyears of 2000/2001, 2001/2002 and 2002/2003, on calcareous chernozem soil, at the experimental site of the Debrecen University Farm and Regional Research Institute, at Látókép. We examined the disease resistance and the yield quantity of Mv Magvas variety by adopting different forecrops and plant protection technologies, at 30+30 N level and at normal cereal row spacing. We applied two forecrops (wheat and pea) and two plant protection technologies (extensive and intensive). We measured the rate of infection by population survey in the first ten days of June.
In the course of our examinations, we found, that the rate of powdery mildew infection was higher in the thicker population sown after pea forecrop in all three years, as powdery mildew is not a typical cereal disease.
The infection rate of leaf mildew and DTR (Dreschlera tritici-repentis) was higher after wheat forecrop in all examined years, because these are typical wheat diseases and infection centres in the soil promote the spreading of these diseases. However, it was possible to parry the adverse effect of forecrops by intensive plant protection.
Due to the chernozem soil, wich has good water management features, and due to the good preparation of the seedbed, the effect of forecrops on yield quantity did not appear in the examined years. The quantity of the yield was only slightly larger after pea forecrop in the cropyears of 2000/2001 and 2002/2003 than after wheat. Nonetheless, the data of technical literatures state that the yield quantity can be larger, even by 15-20%, after pea forecrop.
In the course of intensive plant protection technology, we applied systemic pesticides, while in the course of environmentally sound technology, we used contact pesticides of sulphur content. In those populations that were treated with environmentally sound plant protection technology, infection rate was higher in all three years.
Yield quantities were somewhat lower in the course of applying extensive, environmentally sound technology, because diseases appeared in these populations to the higher degree. Powdery mildew does not, but leaf mildew and Dreschlera tritici-repentis have a significant yield decreasing effect. With appropriate, well-selected fungicides, we were able to keep every leaf diseases well in hand, and the rate of infection was almost independent of the influence of the breeding year. -
Experience at Russian State Agrarian University – Moscow Timiryazev Agricultural Academy on introduction and integration of precision agriculture technology
73-76Views:99Traditional and precision agriculture technologies are compared on the basis of the field experiment. Problems of soil and crop survey and mapping are discussed.