Search

Published After
Published Before

Search Results

  • The comparison of sperm motility and density in four different goldfish (Carassius auratus) types
    135-140
    Views:
    125

    Different goldfish types play an important role both in ornamental fish farming and science. Considering its historical background, the goldfish is a suitable model animal for the study of artificial selection as well as for developmental biological studies. Sperm motility and cell density is an important parameter in determining sperm quality. The aim of our study was to examine the effects of different goldfish types on the sperm quality. Several sperm motility parameters (progressive motility (pMOT, %), straight line velocity (VSL, μm s-1), curvilinear velocity (VCL, μm s-1), linearity (LIN, %), amplitude lateral Head Displacement (ALH, μm), Beat Cross Frequency (BCF, Hz)) of four different goldfish types (Common goldfish-“wild type” N=5, Shubunkin N=4, Black Moor N=4, Oranda N=5) was compared during 60 hours (at 12-hour intervals) at refrigerated storage (4 °C). The variability of sperm density was also investigated in all types. A similar cell concentration was determined in the four goldfish variants (Common goldfish 2.01*1010 ± 3.46*109; Shubunkin 1.71*1010 ± 3.25*109; Black Moor 1.66*1010 ± 3.02*109; Oranda 1.56*1010 ± 5.83*109). Statistically significant difference between the 4 goldfish types in the motility parameters and cell density was not noted. However, a decreasing tendency in Black Moor sperm motility parameters (pMOT, VCL and VSL) was observable, as well as a reduced spermatozoa density in Oranda was also recorded. Our results can contribute to the improvement of the common hatchery propagation of goldfish. Future studies can add more evidence of the possible effects of artificial selection on the reproduction in different goldfish types.

     

  • Theoretical and comparative study regarding the Galerkin-Vlasov method use for study the free vibrations of wood flat plate
    223-228
    Views:
    48

    As for the historic record of the problem related to the study of flat plates, the first results were out for publishing at the end of the 18th century, the beginning of the 19th century, having Chladni E, Strehlke, Konig, R, Tanaka S, Rayleigh L, Ritz W and later on Gontkevich V, Timoshenko S, Leissa as pioneers. Each of the above mentioned authors have had significant contributions regarding the development of methods in order to solve the plates and establish some rigurous solutions of their differential equations of equilibrium. 
    The making of constructions, machines and different high-perfomance appliances, whose functioning should take place in safety conditions, have required theoretical studies of rich complexity, as well as practical experiments, within which the problem of their free and forced vibrations represent an important category in the respective theme of research.

  • Environmental inspection agro tech – guarantee sustainable development agricultural systems
    41-42
    Views:
    129

    Shown the expediency of the environmental expertise technologies of growing crops in terms of impact on soil fertility, crop phytosanitary status, quality, chemicals migration, biological soil activity, crop productivity, which ensure avoidance of adverse impact on the environment and human health.

  • Microbiological status of bulk tank milk and different flavored gomolya cheeses produced by a milk producing and processing plant
    73-78
    Views:
    228

    The microbiological quality of milk is important not only for food safety, but it can also influence the quality of dairy products. In this study, our aim was to assess the microbiological status of the bulk milk of a milk-producing farm, and some natural and flavored (garlic, dill, onion) gomolya cheeses made from pasteurized milk produced by their own processing plant. We determined the number of coliform bacteria, Escherichia coli, Staphylococcus aureus, and molds of three milk and eight cheese samples. The tests were conducted between July and September, 2017.

    In bulk milk, the mean coliform count was 3.83±0.17 log10 CFU/ml; the mean E. coli count was 1.38±0.14 log10 CFU/ml; the mean mold count was 3.74±1.30 log10 CFU/ml; and the S. aureus count was <1.00 log10 CFU/ml, respectively. The mean coliform count in gomolya cheeses was 3.69±1.00 log10 CFU/g; the mean E. coli count was 2.63±0.58 log10 CFU/g; the mean S. aureus count was 3.69±1.35 log10 CFU/g and the mean mold count was 1.74±0.37 log10 CFU/g. The amount of coliforms detected in different flavored gomolya cheeses were significantly different (P<0.05). More than 10 CFU/g of E. coli was found only in the dill flavored cheeses, and S. aureus was found only in dill (3.66±1.86 log10 CFU/g) and onion (3.71±0.52 log10 CFU/g) flavored gomolya cheeses. Based on the obtained results, it was found that the amount of coliform bacteria and E. coli in bulk milk exceeded the limit set in regulation of the Hungarian Ministry of Health (MoH) 4/1998 (XI. 11.) and the amount of S. aureus was below the limit. For gomolya cheeses, the S. aureus count exceeded the limit. The amount of coliform bacteria remained above the limit in cheeses, except for the garlic flavored gomolya cheese. In cheeses, a larger E. coli count was detected than in the bulk milk, but there is no specific limit for cheeses in the regulation. The mold count exceeded the limit specified in the regulation in cheeses, but a lower value was detected relative to milk.

    The results show that, in the case of bulk milk and gomolya cheeses, certain detected quantities exceeded the limit values set forth in regulation of MoH 4/1998 (XI. 11.). The results indicate an inadequate microbiological state of the raw material and the finished products. The reasons for these are due to reduced technological hygiene or the inappropriate handling of raw material and finished products. In this study, we have summarized the results of our preliminary studies, which can provide a basis for further hygiene studies.

  • Microbiological quality of bulk tank raw milk from two dairy farms in Hajdú-Bihar County, Hungary
    105-112
    Views:
    290

    Two main channels have been identified to be responsible for microbiological contamination of raw milk and milk products. Firstly, contamination has occurred due to udder infection from the cow or the blood which harbours most bacteria that come in contact with the raw milk. Secondly, via external factors (may include faeces, skin, contaminated water, environment etc.) which are associated with the operation of milking. There is direct contact with the milk and/or surfaces before, during or after the milking, posing public health risk and economic decline. The aim of this study was to examine the bacteriological quality of bulk tank raw milk samples collected from two different size dairy farms (Farm 1 and Farm 2) of different housing forms (cubicle loose and deep litter) in Hajdú-Bihar County, Hungary in July, 2017. Three samples were taken from each farm, and the total plate count, coliform count, Escherichia coli count, Staphylococcus aureus count, and yeast and mould count were determined in them.

    The results clearly showed low level of all measured bacteria group load in Farm 1 samples in comparison to Farm 2 with the exception of coagulase-negative Staphylococcus (CNS) which represented high level in general, indicating significant difference (P<0.05). The mean value of total plate count in Farm 2 samples was higher (1.0 × 105 CFU/mL) than Farm 1 samples (2.8 × 104 CFU/mL). There was a significant difference (P<0.05) in mean count of coliforms in raw milk samples between Farm 1 and Farm 2. Similarly, results of E. coli were significantly different (P<0.05) with mean count of 1.44 × 102 CFU/mL and 2.02 × 103 CFU/mL for Farm 1 and Farm 2 respectively.

    Results of Staphylococcus aureus also showed significant difference (P<0.05) with mean count of 9.7 × 101 CFU/mL for Farm 1 and 6.28 × 102 CFU/mL for Farm 2. The mean of mould count recorded was 1.07 × 102 CFU/mL and 4.93 × 102 CFU/mL for Farm 1 and Farm 2 respectively. The recorded mean of yeast count was 1.68 × 103 CFU/mL and 3.41 × 103 CFU/mL for Farm 1 and Farm 2 respectively; however, both farms showed no significant difference (P>0.05) in terms of mean of mould and yeast count. Although Farm 2 produced six times lower milk quantity than Farm 1, the measured microbial parameters were high. Both farms’ microbiological numbers were higher above the permitted limit values as stated by Regulation (EC) No 853/2004, Hungarian Ministry of Health (MoH) 4/1998 (XI. 11.).

    This could be an indication of non-conformance to effective GMP, ineffective pre–milking disinfection or udder preparation, poor handling and storage practice, time and temperature abuse and inadequate Food Safety Management System Implementation. Therefore, our recommendation is as follows; establish control measures for pre- and postharvest activities involved in the milking process which would be an effective approach to reduce contamination of the raw milk by pathogenic microorganisms from these farms, strict sanitation regime and hygiene protocol be employed and applied to cows, all equipment, contact surfaces and minimize handling of the milk prior, during and after milking. This will also serve as scientific information to the producers for continual improvement in their operations.

  • The effect of breed and stage of lactation on the microbiological status of raw milk
    37-45
    Views:
    296

    The microbiological quality of the milk is important not only for food safety, but it can also influence the quality of dairy products. The microbiological status of raw cow milk can be influenced by many factors. Our aim was to determine whether there was a difference between the microbiological quality of milk of two different cow breeds (Holstein Friesian and Jersey) kept and milked in the same conditions, and how the microbiological quality of the raw cow milk changed during lactation (beginning, mid, and end). Samples were taken and analysed in July, August and September in 2018 from two dairy farms in Hajdú-Bihar county. During the conducted studies, the total plate count (TPC), the coliform count, the Staphylococcus aureus count and the coagulase-negative Staphylococcus (CNS) count of raw milk samples were determined.

    There was no significant difference (P>0.05) between the milk of the Holstein Friesian and Jersey breeds in the case of TPC. However, the mean coliform count of milk samples taken from Holstein Friesian cows was significantly lower (P<0.05) than the mean coliform count of milk samples taken from Jersey cows. S. aureus was detected in one of the twelve milk samples taken from Holstein Friesian cows, and in two of the eleven milk samples taken from Jersey cows. CNS was found in larger amount in milk samples taken from Holstein Friesian cows, and the difference was significant (P<0.05). Both TPC and CNS count were significantly higher (P<0.05) in individual milk samples taken at the end stage of lactation, than in samples taken in the earlier stages of lactation from Farm “A”. However, in the case of Farm “B”, there was no significant difference (P>0.05) in colony counts at different stages of lactation. S. aureus was only present in milk samples that collected from cows, which were at the beginning and middle stages of lactation. Testimg the hemolysin production ability of S. aureus strains isolated from the raw milk samples, only weak hemolysis was observed on blood agar. In case of antibiotic resistance testing, it was found that all strains were susceptible to cefoxitin, chloramphenicol, clindamycin, erythromycin, gentamicin, penicillin G, tetracycline and trimethoprim/sulphamethoxazole.

    Based on the results of our studies, staphylococci were detected in a higher amount in the milk of Holstein Friesian cows, and coliform bacteria were detected in a higher number in the milk of Jersey cows. Summing up the results of the milk samples taken from the different stages of lactation in one of the farms, it can be concluded that higher TPC and CNS count could be detected at the end stage of lactation than in the samples taken from the earlier stages of lactation. The fact that at the end of lactation the microorganisms could be detected in a higher colony count may be related to the fact that teats could be damaged during lactation by the milking machine, which increased the chance of imvading the microorganisms into the udder.

  • Dilemma of interpreting the Tisza space in regional dimensions
    169-171
    Views:
    108

    This study deals with the evaluation of an especially important area, since the Tisza river is the basis of the spatial organisation of the Great Plain, the main spatial structural axis of Eastern Hungary and also its ecologic corridor of continental significance. The Tisza is a river which connects five countries to each other and it has an enormous catchment area. Its longest section can be found in Hungary. Two million people live directly in the spatial environment of the river. The safety and favourable quality of life of these people have to be provided. This is a great challenge from the aspect of regional development, economic, technological improvement, the acceleration of innovation processes, as well as the establishment of natural and environmental harmony.

  • The effect of water supply and crop year on the yield potential of sweet maize (Zea mays L. convar. saccharata Koern.) hybrids with different genotypes
    203-210
    Views:
    156

    The successfulness of crop production is significantly affected by not only the the average yields that provide cost effectiveness, but also the success of striving for yield safety, therefore, varieties and hybrids tolerant to environmental stress factors are worth being included into the sowing structure. Our aim was to further the decision making of producers in prepaering the right sowing structure by the evaluation of sweet maize hybrids’ tolerance to excess rainfall.
    We performed our examinations in an extremely wet year (2010) on chernozem soil on three sweet maize hybrids (GSS 8529, GSS 1477, Overland) in 12 replications. Comparing the yields of 2010 with those that can be expected under optimal rainfall conditions, we showed that the examined hybrids react to the amount of rainfall higher than their needs with yield depression. The excess rainfall tolerance of the examined hybrids is different in the case of each hybrid.

  • Possibilities of ecological farming in the North Great Plain Region
    69-71
    Views:
    67

    Agriculture plays a significant role in the North Great Plain Region. Organic farming is a sustainable farming method controlled by regulations. Active environmental protection and conservation play significant roles in organic farming, along with food quality and safety, originality and the monitoring of products. Organic farming offers opportunities to create employment, social safety and high profitability. As a result of these characteristics, organic farming could become one of the most important means of developing our region in the future.

  • Novel Applications of Microwave Techniques in the Food and Environmental Industries
    29-34
    Views:
    90

    During the microwave processing, despite the conventional heating, the material heats consistently inside. This property of microwave is utilized by drying and dehydration processes. The thermal sensitivity of raw materials of food industry requires development of gentle, fast and controllable technologies, which is realizable by means of combination of conventional and microwave techniques. The other important application area of the microwave technique is food industrial practice is enhancing the microbial safety of products, mainly by pasteurization processes. In recent time the strict environmental regulation necessitate developing more effective treatment of wastes, waste waters and sewage sludge. Because a part of these techniques are heat and power demanded, the microwave technique may be an alternative process in execution of sludge conditioning, drying or gasification and pyrolysis.

  • Effects of combined nutrient supply treatments on some physiological parameters of autumn wheat
    241-251
    Views:
    137

    The Fleischmann Rudolf Research Institute in Kompolt is not only famous for plant breeding but the institute also surveys the effects of different nutrient supply methods since 1918. In 2017, we joined this research supported by EFOP 3.6.1 project. Our aim was to investigate photochemical processes – which is one of the most determinant in case of yield – of crops by in vivo field measurements. We measured the chlorophyll content of leaves using Minolta SPAD 502. We used miniPAM fluorometer to determine actual photochemical efficiency and non-photochemical quenching of PSII during natural light conditions and also to evaluate the pigment (chlorophylls and carotenoids) and water content of leaves we applied field spectrophotometer (ASD FieldSpecPro 3). We utilized these methods by various treatments (1. treatment with soil bacteria + head and base fertilizer; 2. treated by only head fertilizer; 3. treated by only base-fertilizer) in field experiment of autumn wheat (4.1–2.43–1.19 ha) in June, 2017. The difference between treatments was clearly detectable. In the case of the first treatment, physiological processes were more intense and the ripening occurred earlier. The obtained yield was the highest in the case of the area treated by soil bacterial. Based on the results, the first treatment can be recommended in practice.

  • Economic Assessment of Biodiesel Production for Hungarian Farmers
    72-76
    Views:
    74

    Utilisation of oil of plant origin as a fuel is gaining acceptance in the European Union and elsewhere. Besides environmental protection, energy saving, and decreasing over-production of food. Additionally, the subsidisation of farmers and the development of rural sub-regions also contribute to its spread. This study specifically focuses on the direct effects biodiesel's raw materials and final products are now having on farmers, while reviewing and quantifying these effects. I have purposely restricted my analysis to these two elements of the biodiesel chain.
    The biodiesel chain seems to be a great method for improving the economic and social position of participant farmers in many ways. Presently, the profitability of raw materials’ production looks to be the crucal point in the chain, and could be strengthened best with intensive, habitat-specific agrotechnic. It would only be possible to reach a favourable profit margin for farmers if yields reach unrealistic averages or if there is a significant hike of the 2000 producer’s price in the oil plant branch.
    The main attraction of sunflower- and oilseed rape production lies in the stabilization of market conditions, which is not only gong to appear in oil plant branch but – thanks to the reduction of outputs – also in the cereal branches. Better economic safety for farmers may play a role at least on the same level as in plant production, which involves more risks than profit maximalization.
    The reduction of the prime cost of biodiesel could be possible through the direct combustion of the whole oilseed plant or its residues or electricity production using them. Whereas energy demand for biodiesel production is low (appr. 5%) but it needs subsidization and the prices of natural gas and electrical energy presently look favourable in Hungary. Additionally harvesting and baling of the residues is technically problematic, which is why their use may seem to be reasonable just over the middle or long term. Another possible factor of cost reduction could be the centralization of some partial operations, which needs serious financial resources to reduce amortization cost per product, provided there be several biodiesel projects near each other during establishment. Creation and operation of a logistical system could also be a good method for improving the viability of the biodiesel chain, in order to optimize transport schedule and distances. However there are also some organizational difficulties in this case.

  • Identification of the Slovak traditional cheese “Parenica” microflora
    227-239
    Views:
    232

    Numerous studies have demonstrated the higher accuracy, faster time-to-results and lower costs provided by MALDI Biotyper systems compared to classical methods. In this study, the culturable population of total count of bacteria, enterococci, coliforms bacteria, lactic acid bacteria (LAB) and microscopic fungi and yeasts from cow’s dairy products was identified using the MALDI-TOF MS Biotyper. Altogether, 50 samples of the Slovak cheese “Parenica” were examined. Total numbers of bacteria were cultured on Plate count agar at 37 °C for 24–48 h, aerobically; enterococci were cultured on Enterococcus selective agar at 37 °C for 24–48 h, aerobically; coliforms bacteria were cultured on Violet Red Bile lactose agar at 37 °C for 24–48 h, aerobically. The LAB were cultured on MRS (Main Rogosa agar), MSE and APT agar at 30 °C in microaerophilic conditions. The microscopic fungi and yeasts were cultured on Malt extract agar at 25 °C for 5 days, aerobically. Isolated strains (total 669) were subjected to identification by the MALDI-TOF MS. Among total count the identified bacteria mostly were Acinetobacter baumannii, Bacillus cereus, Micrococcus luteus and Staphylococcus warneri. Escherichia coli and Enterobacter cloacae were the most abundant coliform bacteria representatives identified. Coliform bacteria included Citrobacter, Hafnia and Klebsiella. Altogether three genera belonged to the LAB – Lactobacillus, Lactococcus and Leuconostoc were identified with Lactococcus lactis, Lactobacillus plantarum, Lactobacillus coryniformis, L. fructivorans and Leuconostoc mesenteroides were considered as the dominated LAB species in dairy products. Among yeasts, Kluyveromyces lactis, Candida zeylanoides and Yarrowia lipolytica were among the most isolated.