Search
Search Results
-
The effect of irrigation on the yield and quality of maize (Zea mays L.) hybrids
143-147Views:292In this study, the effect of water supply on the quality and productivity of different maize hybrids was observed.
Maize production is influenced by many agro-technical factors such as nutrient supply, plant density, environmental factors, water supply and temperature. Good soil quality and adequate technology significantly reduce the unfavourable effect of crop year. The impact of fertilization, crop rotation, irrigation and plant density on maize yield was greatly affected by crop year and crop rotation. The main constituent (69–75% dry matter concentration) of maize seed is starch, however, its increase can be achieved only to a limited extent, as increasing the starch content will reduce other parameters, especially protein content. Significant nutrient content improvements can be achieved by appropriate hybrid-site connection and the use of adequate technology. Protein content reduction with optimal water supply can be positively influenced by the appropriate nutrient supply for the hybrid.
The experiments were carried out at the Látókép Experimental Site of Crop Production on calcareous chernozem soil. The weather of the examined year, which was partly favorable for maize and partly unfavourable in other respects, was also reflected in the development of maize and yields achieved.
In 2019, we were examining the hybrids of Kamaria (FAO 370), P 9903 (FAO 390), DKC 4351 (FAO 370) and KWS Kamparis (FAO 350–400). Due to the dry soil condition, sowing was delayed, however, the hybrids emerged ideally because rain arrived soon after sowing, which facilitated initial development. Young plants evolved rapidly and dynamically in the case of all hybrids. In terms of heat-demanding bread, the month of May was unfavourable to temperatures below the annual average, but the higher amount rainfall helped the development. However, due to the drier period in early July, 25–25 mm of irrigation water was applied to half of the experimental areas on July 1 and 15.
The aim of our research was to determine the best population density for hybrids under favourable soil conditions (calcareous chernozem soil). In both irrigated and dry conditions, a crop density of 75,000 crops were the most favourable for the Kamaria hybrid. The P9903 hybrid in the case of a crop density of 85 crops proved to be ideal and the DKC4351 had an optimal population density of 95,000.
However, it should be taken into consideration that, in the case of soils with poor water management, the drought sensitivity of the crop stand may increase at a population density of 95,000.
As a result of irrigation, yield increased and the difference between the examined plant numbers decreased. The yield growth was relatively moderate (341 kg ha-1 – 1053 kg ha-1), which makes the economicalness of irrigation doubtful in the given year.
-
Studies on the Fusarium stalk rot infection of the maize genotypes using the Findex percentage and a computerised image analysis program
45-51Views:211In a continental climate, the pathogens causing the most serious problems are species belonging to the Fusarium genus. When the pathogen attacks the stalk, the plant dies earlier, reducing grain filling and resulting in small, light ears. In addition, the stalks break or lodge, resulting in further yield losses from ears that cannot be harvested. During the three years of the experiment, 14 inbred lines were examined. The genotypes were sown in a two-factor split-plot design with four replications, with the genotypes in the main plots and four treatments in the subplots: two Fusarium graminearum isolates (1. FG36, 2. FGH4), 3. sterile kernels, 4. untreated control. The results experiments showed significant differences between the genotypes for resistance to fusarium stalk rot. Among the inbred lines the best resistance to fusarium stalk rot was exhibited by P06 and P07, both of which were related to ISSS. The precision and sensitivity of disease evaluations carried out visually and using image analysis software were compared in the experiment, and with two exceptions the CV values were lower for the image analysis. As the CV for measurements can be considered as a relative error, it can be stated that image analysis is the more precise of the two methods, so this technique gives a more accurate picture of the extent of stalk rot. The extent of stalk rot developing in response to natural infection is extremely environment-dependent, so the use of artificial inoculation is recommended for selection trials.
-
Allelopathic effects of water extracts of pieces of wooly cupgrass (Eriochloa villosa) on the seedlings of field crops
167-170Views:349In Hungary, the woolly cupgrass (Eriochloa villosa [Thunb.] Kunth) endanger row crops (i.e. corn, sunflower). Its fast spreading based on some reason viz. long-lasting emergence, reduced sensitivity to many kinds of herbicides, vigorous competitional ability and fast initial growth. Allelopathy, ability of many plant species to produce one or more biochemicals wgich is used tocompete with each others. In this experiment we examined, whether the woolly cupgrass possesses allelopathy, and if so, how influences on the development of cultured crops like maize, sunflower and lettuce.
-
Novel Applications of Microwave Techniques in the Food and Environmental Industries
29-34Views:188During the microwave processing, despite the conventional heating, the material heats consistently inside. This property of microwave is utilized by drying and dehydration processes. The thermal sensitivity of raw materials of food industry requires development of gentle, fast and controllable technologies, which is realizable by means of combination of conventional and microwave techniques. The other important application area of the microwave technique is food industrial practice is enhancing the microbial safety of products, mainly by pasteurization processes. In recent time the strict environmental regulation necessitate developing more effective treatment of wastes, waste waters and sewage sludge. Because a part of these techniques are heat and power demanded, the microwave technique may be an alternative process in execution of sludge conditioning, drying or gasification and pyrolysis.
-
Nutrient deficiency and effects of various nutrition technologies on crop health
109-113Views:480The impacts of climate change on crop production are increasingly noticeable. Extreme weather conditions – such as devastating droughts, which occur more often – have serious effects on crop conditions, thus damaging their defence ability against pathogens and pests. Therefore, in order to achieve high-quality and high yielding crops, it is urgent to elaborate new technologies that improve general condition of crops and prevent development of nutrient diseases. Those crops which suffer from the lack of certain nutrients are more sensitive and their tolerance against diseases are decreased. Nitrogen – as the most influencing macronutrient in yield – is also essential in maintaining crop health. Nevertheless, due to the complicated processes in soil (such as leaching, denitrification), the utilization of nitrogen is not nearly complete, therefore nitrogen stabilizers may be needed to maximize this factor. The use of these stabilizers can be promising where plants with high nitrogen content are grown, although further experiments are needed in which impacts of nitrogen stabilizers on crop protection aspects are examined as well, since there is a close correlation between exaggerated nitrogen fertilizing and sensitivity to pests. During my research I am going to examine the combined effect of foliar fertilizer and nitrogen stabilizer on crop health. Furthermore, my goal is to find clear correlation between pathogens and the different technological variants of nutrition.
-
The effects of the climate change and the drought stress on potato production – A review
61-67Views:454Potato (Solanum tuberosum) is the fifth most important cultivated crop according to its growing area and fourth by its production volume. Originated from the Andes of South America throughout the last five centuries spread over the world and became a global staple food. Over the years potato production has greatly evolved due to advancement in agrotechnology reflecting in higher yields contrary to the worldwide decreasing production area. The wide range of potato’s ability for adaptation allows it to thrive in many different soil types and climates making it a main contributor in food security. Nonetheless rising temperatures, extreme weather events, water scarcity driven by climate change imposes serious challenges and threats for global potato production.
This review presents the short history of potato cultivation, statistics of present and past production and agroecological needs for ideal farming. The review also attempts to explore the impact of climate change on potato growing spotlighting on drought and heat sensitivity.
To deal with these climate change induced challenges several mitigation options are proposed just as foliar applications of salicylic acid, hydrogen peroxide, silicon and micronutrients to elevate perseverance against abiotic stresses. -
Sensitivity of maize hybrids to common smut under field artificial inoculation conditions
25-28Views:476Common smut disease of maize is one of the most frequent diseases of crop. In the last decades the importance of disease has decreased in feeding maize production, however its importance increasing again nowadays, especially at sweet maize hybrids. The aims of this work was to find hybrids possess of resistance, and to evaluate which ones are more or less susceptible under field artificial inoculation circumstances. Among feeding maizes the less susceptible hybrid was ‘P9578’, and the most susceptible ’NK Columbia’ hybrid, and differences in cob infection between them was significant (8.8%). At sweet corn hybrids the less susceptible was ’Prelude’, while the most susceptible was ’Jumbo’ with very high significant 74.6% differences.
-
Application of the SDS-PAGE method for the characterisation of winter wheat flour quality
112-118Views:411The principle, development and importance of the SDS-PAGE method are presented in this article. The SDS-PAGE method has become one of the basic methods of molecular biological research, because it is widely applicable and its sensitivity is excellent in the separation of wheat storage proteins.
We have shown the application of this method with a concrete example. It was also tested whether, it was possible to obtain a better baking quality product from a large amount of poor quality less valuable wheat by fractioning the flour according to particle sizes after grinding. We studied the rheological properties of flours with different particle size fractions from the original flour. The baking quality of the original flour was B2. The 125-90 and 90-63 μm fractions have significantly better baking quality (B1) than the original flour. The protein contents of these flour fractions were also significantly higher than the protein content of the original flour. We had a question: what has influenced the baking quality: the protein content or other factors? We searched for an explanation on these results in the protein composition of the flour samples. We studied the distribution of glutenin-fractions by SDS-PAGE method and evaluated them. We found with correlation analysis that the amount of LMW-Glutenin D-group (52-60 kDa) is in a strong, negative correlation to the baking quality (r = – 0.855*). Therefore, the baking quality of flour samples was influenced by this glutenin fraction.