Show Advanced search options Hide Advanced search options
The effect of plant density to the yield results and the yield components of maize hybrids
Published May 16, 2017

Maize is the crop that is produced on the second largest area in our country, in Hungary. It is planted on nearly 25% of the country’s growing area and it was produced on 1 090 439 hectares in 2016. Despite the continuous development of the biological basis and production
technology, the growth of the yield results is not constant, its flu...ctuation is significant. It can be even up to 60%, because of the extremity of the years. The exploitation of the yield potential of modern hybrids is possible if we harmonize the effects of the ecological factors and properly applied instruments of agro technology and by these we ensure their interaction to reach a favorable outcome. The applied plant density is an important, well researched, but at industrial level a not enough utilized element of the maize production.
The results of the extensive tests, done between 2009 and 2015, showed that the genotype, the year effect and the plant density are in strong correlation with each other determining the yield results. In the past seven years the examined genotypes reached the highest yield
performance at the highest plant densities. The early hybrids (RM90–95, FAO 200–300) are capable of producing them at higher plant density, while in case of the mid and late maturity varieties the further increasing of the density after reaching the optimum level led to yield depression.
According to our experimental results, the yield is in close positive correlation with the increase of the plant density. The effect of the growing season has great significance in forming the yield results and this determines the applicable plant density too.
The yield of maize is determined by a resultant of components. The main component is the number of ears per plant and the amount of kernels per ear, which is calculated from the number of kernels on an ear and the weight of them. The number of the kernels on an ear is
calculated from the number of rows on the cob multiplied by the number of seeds in one row on the cob. In dry years, at lower yield levels the yield decreases because of the shorter ears, while at the higher levels the number of kernels in a row and the thousand-kernel weight decreases,causing yield depression this way. From our examinations it turned out that the plant density reaction of a genotype is individual, every variety reaches its maximum kernel number per hectare – in other words the maximum yield - in an individual way.

Show full abstract
Effects of production factors on the yield and yield component of winter wheat
Published May 27, 2001

The effect of major production factors (forecrop, fertilisation, irrigation, soil cultivation and soil preparation) on the yield components and yield of winter wheat were studied in a long-term  experiment set up at the Látókép Experimental Nursery of the Agricultural Sciences Centre of the University of Debrecen. The results of regress...ion analysis led to the following conclusions:
• In our experiments in 2000, after using maize as a forecrop –based on the results of analysis of regression – fertilisation determined the yield.
• After using pea as a forecrop, a N50 P35 K40 kg/ha fertiliser rate led to an economical increase in the yield of winter wheat.
• None of the determinative yield components varied significantly for winter wheat produced after using pea as a forecrop.
• There is a closed, significant correlation between plant height, spike length, plant and spike mass, the number of spikelets and grains per spike after using maize as forecrop. The thousand grain mass is different from the other yield components, because it is not part of the relation system of
those yield components.
• The increased yield of winter wheat after maize has been used as a forecrop is due to the positive change in grain number per spike yield component.

Show full abstract
The effect of production area on the development of yield producing factors of maize (Zea mays L.) hybrids of different genotypes
Published February 18, 2016

Maize yield amount development is determined by the given crop year and the genotype of the applied hybrid, but beside these also by the applied agrotechnical factors, in particular by sowing technology. The development of yield amount and yield producing factors of five maize hybrids of different genotypes has been studied in a small-plot fiel...d experiment by the application of different row spacings and plant density variants. The production of the individual plants shows decreasing tendency parallel to the increasing plant density, however, this decrement is compensated by the higher number of plants per unit production area. Individual plant production is determined by the development of yield producing factors, such as the length and the diameter of cobs, just as by the thousand seed weight – that were studied in the present research work as well.

In the present research work the decreasing row spacing resulted in a yield increment of 0.67 t ha-1 (4.53%) in 2013, while in contrast in 2014 yield was decreased by 1.75 t ha-1 (14.87%). The high amount of precipitation in March was determinant in 2013: it filled up the soil water stock and balanced the negative effect of the inadequate amount and distribution of precipitation during the vegetation period for the yield. Lower extent of yield increment (0.6 t ha-1) was registered in 2014 in case of the row spacing of 76 cm than in the previous year. In case of a row spacing of 45 cm the difference between the two crop years was 3.1 t ha-1. The highest impact on the yield production factors was found in all treatment combinations in case of the applied hybrid among the three studied treatment factors. In the crop year of 2014 the effect of plant density on cob diameter and thousand seed weight could be revealed as well. In case of the cob diameter significant difference was found between the plant densities of 70 000 and 90 000 plants ha-1, just as between the populations with densities of 50 000 and 90 000 plants ha-1. In case of the thousand seed weight significant differences could be found by the application of plant densities of 70 000 and 90 000 plants ha-1. The highest values of the studied yield producing factors were measured in case of the plant densities of 50 000 and 70 000 plants ha-1; increasing the plant density to 90 000 plants ha-1 resulted in rather decreasing values.

Show full abstract
The effect of drought and cropping system on the yield and yield components of maize (Zea mays L.)
Published December 28, 2018

Different Cropping Systems have many advantages and ensure better crop growth and yielding. Its combination with other agronomic measures can ensure optimal crop density for maximum crop growth and photosynthesis efficiency. The aim of this study was to investigate the influence of different cropping systems on monoculture and biculture rotatio...ns [maize- wheat]. The study found that crop rotation does not have a significant effect on the grain nutrition quality, Leaf Area Index (LAI) and Normalized Difference Vegetative Index (NDVI) but has a significant effect on the Soil-Plant Analysis Development (SPAD). Yield and yield components were significantly influenced by crop rotation in this study as yield, plant height, cob weight and number of grains per row all recorded lower mean at 5% probability levels.

Show full abstract
Grain yield and quality of maize hybrids in different FAO maturity groups
Published October 5, 2010

An improvement in the quality of maize grain by increasing the level of components responsible for its biological value is possible
by using genetic means. However, a change in the genotype, together with improving the nutrient properties of the grain, also has some
adverse consequences connected with a fall in yield and in resistance to ...diseases.
Field experiments were conducted during three years (2003, 2004and 2005) to evaluate environmental effects on grain yield and
quality responses of maize hybrids. Twenty one hybrids of various maturity groups (FAO 150-400) were planted to achieve an optimum
(60-70 000 plants per hectare) plant populations and grown under the medium-N (80 kg N ha-1) fertilization. Environmental conditions
significantly affected maize hybrid responses for grain yield, starch, oil and protein contents, and consequently, starch, oil and protein
yields per hectare. Hybrids of flint type, which have a short vegetation period, had high protein and oil content but the yield averages
were low due to the slower rate of starch incorporation. Hybrids of the dent type have a longer growing season and more intense
carbohydrate accumulation, but low protein and oil contents. In wet years there was a higher rate of starch accumulation, while dry
years are favorable for protein and oil accumulation. Positive correlation existed between starch content and grain yield and 1000-
weight as well as between oil content and volumetric weight among tested hybrids. Negatively correlation existed between grain oil and
starch content as well as between oil content and grain yield and 1000-weight. Thus, end-users that require high quality maize may need
to provide incentives to growers to off set the negative correlation of grain yield with oil and protein content.

Show full abstract
The impact of sowingdate and production area on the yield of white lupin (Lupinus albus L.) on Nyírség brown forest soil
Published March 11, 2014

The lupine is very sensitive to the different ecological conditions. The examinations of lupine was started in 2003 and our aim is determine yield components which directly affecting crop yields (flower, pod and seed number per plants) in different sowing times (3 times, two weeks apart) and growing area area (240, 480, 720 cm2) comb...inations. According to our results the sowing times, the growing area and the meteorological conditions are influence on yield significantly. Our data suggest that the early sowing and large growing area combination is favourable to rate of fertilized plants and to development of yield. Later sowing reduces the seed yield depending on the cropyear. In our experiment, the decrease of yield was in the unfavourable year (2003) 20–96%, and in the most favourable meteorological conditions (2004) 10–79%, and in rich rainfall year (2005) 15–88%.

Show full abstract
Comparative analysis of maize hybrides grown for bioethanol production purposes
Published May 16, 2012

The objective of this study was to evaluate the effects of crop year on the main components of maize grown for bio-ethanol production yield, starch content and starch yield per hectare of maize hybrids were investigated in a droughty (2007) and in a favourable years with optimal weather conditions (2008, 2009). We measured very low starch yield... (1.5 t ha-1) in the year with unfavourable precipitation supply (2007) together with higher starch content (73%). In the case of good precipitation supply we measured a much higher starch yield per hectare (7.7 t ha-1) with lower content (72.4%). In 2009 the starch content (74.5%) exceed the results of the two previous years, but on the other hand the average of starch yield was (4.9 t ha-1) which falls between the other two years values.

Show full abstract
The effect of water supply for yield formation of processing tomato
Published November 13, 2012

The effect of irrigation on tomato yield depends on the actual weather conditions, basically the air temperature and precipitation (quantity and dispersion). The irrigated plants gave a significantly higher yield, and rainfed plants showed a yield loss. The optimum water supply treatment gave a significantly higher proportion of lycopene than t...he control (rainfed) treatment (89% and 80% respectively) in case of Brixsol F1 variety. In spite of this we have not found significant difference in case of Strombolino F1 (cherry type). Content of total poly-phenols measured in Strombolino F1 (cherry type) was significantly higher than that found in the Brixol F1 (normal type). The optimum water supply treatment resulted in a significantly lower content of total polyphenols in both years. Tomato fruits are rich in polyphenols the largest amount of which is rutin from among the identified components.

Show full abstract
Effects of the cropyear and the agronomical factors on agronomical elements of different sweet corn (Zea Mays L. convar. saccharata Koern.) genotypes in long-term experiment
Published December 16, 2012

In the crop season of 2010 (rainy year), we studied the effect of three agrotechnical factors (sowing time, fertilization, plant density) and four different genotypes on the agronomical characteristics of sweet corn on chernozem soil in the Hajdúság. The experiments were carried out at the Látókép Experimental Farm of the University of Deb...recen. In the experiment, two sowing dates (27 April, 26 May), six fertilization levels (control, N30+PK, N60+PK, N90+PK, N120+PK, N150+PK) and four genotypes (Jumbo, Enterprise, Prelude, Box-R) were used at two plant densities (45 thousand plants ha-1, 65 thousand plants ha-1). The amount of precipitation in the season of 2010 was 184 mm higher, while the average temperature was 0.8 oC higher in the studied months than the average of 30 years. Weather was more favourable for sweet maize at the first sowing date, if we consider the yields, however, if we evaluate the agronomical data and yield elements (number of cobs, cob length and diameter, the number of kernel rows, the number of kernels per row) it can be stated that the size of the fertile cobs was greater at the second sowing date due to the lower number of cobs. The largest number of fertile cobs was harvested in the case of the hybrid Enterprise (72367.9 ha-1) in the higher plant density treatment (65 thousand ha-1) at the fertilization level of N120+PK when the first sowing date was applied. The largest cobs were harvested from the hybrid Box-R (cob weight with husks: 516.7 g, number of kernels in one row: 45.7) at the lower plant density (45 thousand plants ha-1) in the second sowing date treatment. Cob diameter and the number of kernel rows were the highest for the hybrid Prelude.

Show full abstract
Yield components of hairy vetch (Vicia villosa Roth.) in different sowing technologies on acidic sandy soil
Published December 15, 2019

Nearly a quarter of the agricultural utilized area of our country is made up of sandy soils. Sandy soils are poor in nutrients, and, therefore, the effectiveness of farming is basically determined by the method of maintaining soil fertility and the fertilization practice.

The hairy vetch called Vicia villosa Roth (Sandy Roth.), also kno...wn as a sand pioneer, plays a significant role in the exploitation of sandy soils. Its cultivation was started in Hungary in the late 1800s. It is primarily used as green fodder, most recently as a green manure and as a soil protection plant. The lupine is grown mainly as a supportive plant, which was previously rye, and today it is triticale. The ratio of the two plants to each other and the spatial location of plants depend on the method of sowing.

The aim of our work was to present the yields of some of the grain grown in different sowing methods and some of its crops.

Show full abstract
Presentation of sales price reserves for live lamb
Published September 2, 2009

Although sheep breeding in Hungary is grounded in strong traditions, its activities only comprise 1% of the total production value generated from agriculture, and 2% of that for animal-based products. The most significant portion of incomes earned in the Hungarian sheep sector has, for years now, stemmed from the sale of live animals. The secto...r is decidedly export-oriented, as the domestic demand for its main product, i.e. lamb meat, and is minimal, equaling some 20-30dkg per person per year. Part of the sold animals is sold to market as dairy sheep, while the greater
part is sold in the category of lamb carcasses. For this reason, the average weight of slaughter sheep has lied between 19-22 kg for years now. The target markets for live lamb sales are predominately Italy and Greece. In Greece, movement on this market has shown an upward tendency in recent years; noteworthy are also sales to Austria, Holland, Bosnia-Herzegovina and Poland. In 2003, we exported sheep meat in the form of carcasses to Italy, as well as to Germany, and of these exports, 94% went to Italy, while the remaining 6% went to Germany.
Among sheep products, only the trade balance for live animal sales is positive. But even for such producers, only those who are specialized in intensive breeding and those sheep farms  “targeting” meat production can obtain earnings. Specialized literature on the sector argues that the quality of Hungarian lamb has diminished dramatically and is beginning to lose its market position. If Hungarian lamb does not meet market expectations, then it will only be bought from producers at lower prices.
My research focuses on those factors which influence price. I separately discuss the question of quality, as one of the most important decisive factors on price. Within this discussion, I describe the market expectations which actually have an effect on the acceptance of live animals for sale on commission. In practice, after the problems of quality, the next most important question is that of when sale is made. In the course of my research, I studied the development of averages for sales on commission of live lambs using statistical methods. The most important problem of this sector is the hierarchical system used in sales: this is the topic hich neither the producer, nor the buyer, wish to discuss, not even with each other. On the basis of the information at my disposal, I outlined the levels of traders and individual levels used to arrive at commission prices. Finally, I examined the components of the production value of live lamb sales. The results I obtained quantified the key role of the prices and the yield, as well as the factors influencing income. 

Show full abstract
1 - 11 of 11 items