Search
Search Results
-
Comparison of growth parameters of 40 varieties/clones short rotation coppice willow (Salix)
99-104Views:123The plantation of willow varieties was established in 2009. The 40 different varieties and clones of Salix were planted at a research field in Kolíňany (Nitra district). The paper evaluates results from the first growing season in 2009. The survival rate of planted cuttings ranged from 55.56 % to 100.00 % after the first year. The lowest survival rate was reached by Terra Nova variety. The stem numbers per plant ranged from 1.17 ±0.37 to 2.53 ±0.98. The average height of one-year old stem varied from 65.82 ±36.60 cm to 225.58 ±68.61 cm. The average stem diameter ranged from 6.90 ±2.63 mm to 14.34 ±3.39 mm. There were statistically very significant differences in parameters of stem height stem diameter and stem numbers per plant among studied varieties/clones. The statistic method used was analysis of variance ANOVA. The varieties were then divided into 6 groups according to their similarity in observed parameters after the first growing season by cluster analysis. The best results were reached by varieties/clones classified in the second group. The survival rate, stem diameter and stem height values of these varieties/clones were above average.
-
Study of drought stress correlation on yield and yield components of maize cultivars (Zea mays L.)
67-73Views:160This article was investigated to study the correlation and analysis of drought stress regression on maize cultivars' yield and components. The variance analysis results showed a significant difference between drought stress levels in terms of plant height, total dry weight and number of seeds per row, the total weight of cob, grain yield, harvest index, stem diameter, and cob weight with protective leave. Also, there was a significant difference in ear weight without protective leaves, ear diameter, ear length, plant weight, 100-seed weight, and seed per ear on hybrid treatments. There were statistically significant differences between cultivars in plant height, leaf area, ear diameter, ear length, number of seeds per row, number of seeds per ear, the total weight of cob wood, 100-seed weight, harvest index, plant dry weight. The results of the correlation of traits for the mean levels of drought stress showed a positive and significant correlation between plant yield and plant height, seed per row, ear length and weight of 5 pieces of wood and also with a total weight of cob wood, ear weight with bark showed the highest correlation. There is a significant correlation between leaf area and stem diameter, plant weight, total dry weight at the probability level of 0.05. Correlation coefficients between traits in non-stress conditions showed a positive and significant correlation between grain yield and height, ear length and grain in the row, which was a significant increase compared to stress conditions. The correlation of traits under full stress conditions also showed that the correlation coefficient between cob length trait and positive height was positive and significant. From the study of correlation coefficients between maize traits in non-stress conditions, it can be concluded that the most important components of grain yield are cob length and grain per row. While the correlation coefficients under moisture stress conditions show that the grain trait in the row has a positive and significant correlation with yield, under stress conditions in the cob stage did not show any traits with correlation yield.
-
Fruit quality of sweet cherry cultivars in superintensive orchards
75-81Views:166The fruit quality of 15 sweet cherry cultivars (’Canada Giant’, ’Celeste’, ’Chelan’, ’Ferrovia’, ’Germersdorfi Rigle’, ’Katalin’, ’Karina’, ’Kordia’, ’Linda’, ’Regina’, ’Sam’, ’Sandra Rose’, ’Sunburst’, ’Sylvia’ and ’Techlovan’) was studied under super-intensive growing conditions at Nagykutas. We measured the fruit diameter, fruit width, fruit height, stem length and stem weight, fruit and pit weight and the total dry matter content. There were large differences among the cultivars. These differences are due to the genetic characteristics of fruits because all other conditions were the same. For 11 cultivars, we collected fruit samples several times /2-4/. We examined on this cultivars all the above listed fruit quality parameters. When examining these samples, we have gained information how earlier or later than optimal harvest time influences fruit quality.
-
Sweet cherry fruit quality by half-intensive orchard management
76-79Views:81We made our study on fruit quality in the summer of 2005 on 6 cultivars („Bigarreau Burlat”, „Germersdorfi 3”, „Germersdorfi 45”, „Katalin”, „Linda” and „Van”) in a half-intensive sweet cherry orchard in Siófok. We measured fruit diameter, fruit width, fruit height, stem length and stem weight, fruit and pit weight and total soluble solids content. There were large differences among cultivars in the datas. These differences are due to genetic fruit-characteristics, because all other conditions were the same. We harvested fruits by 3 cultivars two times to check their characteristics on two ripening phases. We examined on these cultivars all the above listed fruit quality parameters. With these data we can be informed about the role of later than optimal harvesting time and how big an effect it has on fruit quality.
-
The significance of biological bases in maize production
61-65Views:159The comparative trial has been set up in the Demonstration Garden of the Institute of Crop Sciences of the University of Debrecen, Centre for Agricultural and Applied Economic Studies, Faculty of Agricultural and Food Sciences and Environmental Management in 2012, with 24 hybrids with different genetic characteristics and growing periods. The soil of the trial is lime-coated chernozem, with a humus layer of 50–70 cm.
The weather of the trial year was quite droughty; the monthly average temperature was 3–4 oC higher than the average of 30 years. High temperature, together with lack of precipitation occurred during the most sensitive phenophases of maize (flowering; fecundation, grain saturation).
The following characteristics have been observed: starting vigour, date of male and female flowering, plant and cob height, dry-down dynamics during maturation and the change of yield composing elements has also been quantified. The yield was recalculated to 14% moisture content grain yield after harvesting.
The beginning of the growing period was advantageous, therefore the analysed hybrids could grow a high (above 300 cm) and strong stem. The yield of the hybrids changed between 10.33 and 11.87 t ha-1, but as a result of the unfavourable climatic extremes, their genetic yield potential prevailed only at a rate of 30–40%. However, moisture content by the time of harvesting was good despite its early date (12th September); it remained under below 14% in most cases. Dry-down was measured on a weekly basis between 14th August and 5th September.
The analysis of the qualitative parameters of the maize hybrids (protein %, oil % and starch %) resulted in significant differences. The most significant difference has been observed in the case of protein content (LSD5%=2.01). Oil content was the most advantageous in the case of hybrids belonging to the mid-late growing group (FAO 400). The X9N655 and 36V74 hybrids had the highest oil content (around 4%), while hybrids P9915 and 37F73 had significantly lower oil content. Starch content was above 70% in the case of every hybrid.
Hybrid selection is highly important in terms of yield and yield security of maize, as well as the application of modern biological fundamentals and hybrid specific technology for the improvement of the level of cultivation technology.
-
Basil (Ocimum basilicum L.) harvest and plant replacement methods in aquaponia
91-98Views:29The aim of the study is to investigate the potential of basil leaf mass production under aquaponic conditions with different harvest and plant replacement methods. Aquaponics is a combination of soil-less crop production hydroponics and aquaculture and it is can use and clean the wastewater of intensive aquaculture systems. Three groups were established in the 6 units during the six-week harvest and seedling rotation cycles. Group 1 individuals remain in the units throughout the breeding season. Group 2 individuals were replaced every 12 weeks, while Group 3 individuals were replaced every six weeks, at the same time as harvest. Data from the experiment were analysed to determine how the harvest and replacement protocol of basil plants influences the amount of leaves harvested, the percentage of leaves harvested relative to the plant stem, and the changes in plant height, SPAD and NDVI during harvest and replacement. A continuously maintained and harvested healthy basil stock under aquaponic conditions can provide a consistent leaf mass all year round without the extra cost of replacing and producing seedlings.
-
Fast neutron irradiation long term effect on Ocimum basilicum germination and initial vegetative parameters
23-31Views:98The goal of this study is to assess the long-term (3-year) effects of rapid neutron irradiation using an Americium-Beryllium source on two generations (M0 and M1) of Ocimum basilicum commercial trait. Seeds of each variety and generation were irradiated with 0, 7.5, 20, 40, and 50 Gray in 2018, and then seeded in 2021 – with their corresponding controls – to see how the different irradiation treatments affected germination and early vegetative metrics three years after irradiation. In the first generation, no significant changes between the treatments were seen. Increased irradiation dosage resulted in a significant decrease in germination % in the second generation (M1), but a significant increase in seedling height. The M0 generation seedlings, on the other hand, were substantially shorter than controls. In the M0 generation, the higher dosages (40 and 50 Gray) were deadly, and seedlings were terminated 7–10 days after germination. The irradiation dose of 20 Gray was shown to be the most successful in inducing viable and beneficial alterations for phenotypic characteristics in basil. When compared to control plants, the lower (7.5 and 20 Gray) bombardment generated leaf anomalies such as smaller leaves and internodes, a split apex, and a ribbon-like stem.
-
Tending operation model for red oak stands
133-136Views:158Red oak (Quercus rubra L.) is our most important exotic oak species, that possesses growing culture with almost one hundred years in our country. Plantation character of red oak growing predominates principally by applied regeneration method (mostly artificial), regular planting space, applying defined method and planting space regulation system. Forest tending model for red oak, that considered stopgap in the native literature is intended to serving the latter. Especially important equation in the viewpoint of stand growing, that describes relationship of stem number (N, in hectare) and diameter at breast height (D1.3 in cm) is: N=e9.80220-1.12607lnD1.3.
-
Yield table for selected black locust (Robinia pseudoacacia L.) cultivars
193-198Views:157In Hungary, the black locust (Robinia pseudoacacia L.) can be considered as the most important fast-growing, stand-forming introduced tree species. Due to its positive growing technological characteristics as well as wood utilization possibilities, at the present, black locust is the most widely planted tree species in Hungary, covering 25% of the country’s total forest area. One of the important tasks ahead of Hungarian black locust growers is to improve the quality of black locust stands with introducing selected cultivars. For the estimation of the growth rate and yield a numerical yield table has been constructed on the basis of surveys of the experimental plots established in pure,managed ’Nyirségi’ ,’Üllői’ and ’Jászkiséri’ black locust cultivars’ plantations which can be suitable for sawlogs production. In the course of 56 stand surveys the key stand characteristics were measured, and then, were reconsidered the average height, diameter (DBH), volume, basal area and stem number given separately for the main (remaining), secondary (removal) and total stands per hectare. The programmable editing procedure allows to extention and formal change of information content of the yield table according to different demands.
-
Effects of plant density on photosynthetic characteristics and yield of maize under irrigation condition
115-118Views:280Maize plant response to plant density is an essential agrotechnical factor used for determining grain yield. Three plant densities (60,000 ha-1, 72,500 ha-1, and 85,000 ha-1) were used in this study to ascertain the effect of photosynthetic parameters and grain yield. Results show a significant difference in the photosynthetic parameters (SPAD, NDVI, LAI) and plant height for plant density of 85,000 ha-1. Grain yield and stem diameter were not significantly affected between the different plant densities.