Search
Search Results
-
The efficiency of the different elements of spring barley growing organic technology in the conditions the eastern steppe of Ukraine
209-213Views:127The effectiveness the use of new nutrient complexes is studied. It is set that a combination of nutrient complexes with organic and organicmineral nutrition background promotes to good growth and development of plants during the growing season, provides the best parameters of crop yield structure and the crop yield and economic efficiency of spring barley cultivation in the condition of the Eastern Steppe of Ukraine.
-
The influence of fertilization and tillage method on the formation root system capacity and grain production of spring barley
89-93Views:124To evaluate the interaction of year x variety, year x tillage method and year x fertilization on the grain yield and root system capacity (RSC) of spring barley, we ran polyfactorial field trials in agroecological conditions of a warm corn production area in Slovakia, at Malanta, in 2009 and 2010. The RSC measurements were done using LCR - meter at a frequency of 1 kHz and they took place in four growth stages: at leaf development in the stage of four leaves (RSC1), in full tillering (RSC2), in the stage heading (RSC 3) and at the stage of ripening (RSC4). The values of grain yield, RSC1, RSC2, RSC3, RSC4 reached in 2009 comparison to 2010 were significantly lower. The highest yield in 2009 was reached by variety Marthe (4.49 t.ha-1) and by variety Bojos (7.19 t ha-1) in 2010. The highest values of RSC in observed growth stages were achieved by variety Bojos in 2009, and in 2010 also besides RSC1. Within both years, difference in yields between tillage methods was not observed. The values of RSC in growth stage of 4 leaves and tillering was higher at conventional tillage, butthe values of RSC3 and RSC4 were higher with minimized tillage. The highest grain yield and values of RSC in every growth stage were achieved on the fertilization variant “c“ in 2009 and on the fertilization variant “b“ in 2010. The correlation relationships between grain yield and RSC were significant and positive in every growth stage. The strongest relationship was found among grain yield and RSC (r=0.6047).
-
Agronomic bases of precision barley production
217-220Views:90To ascertain the importance of individual preciosion factors in achieving yield and quality of malting barley, we established a multifactor
experiment at the research station of the Slovak University of Agriculture in Nitra in 2009 and 2010. Four variants of fertilization, 2 ways of soil cultivation and four varieties 'Bojos’, 'Kangoo’, 'Marthe’ and 'Xanadu’ were observed. From the quality indicators the nitrogen content (%) was observed. The results were statistically analyzed by using a multifactor analysis of variance by using Statistica 8, the program Statgraphics. The difference between years was statistically significant (1.87 t ha-1) in favour of 2010. The difference was also significant between the varieties 'Bojos’ and ’Kangoo’(1.07 t ha-1), respectively. 'Martha’ and 'Xanadu’ as well as 'Kangoo’ (0.56 resp. 0.33 t ha-1). Conventional soil cultivation in
comparison with a minimalization technology, demonstrated a tatistically insignificant increase of yield. Significant differences were obtained between the variants of fertilization. Treatment by using Condit (b-var.) showed a very positive impact in climatic favorable year (2010) with a yield result of 7.42 t ha-1. In comparison with an untreated control, the difference in yield was 0.89 t ha-1. A significant increase of yield was achieved by using the combination of solid fertilizer with foliar fertilizer (LAV + Hakofyt, var.c) 0.47 t ha-1. The crude protein content was statistically influenced by a variety and year. In 2009, the crude protein content was above average (12.38%). Significantly lower attributes were achieved in 2010 (9.90%). From the studied/observed varieties the lowest crude protein content was showed by a variety 'Kangoo’ (1.68%). -
Evaluation of reduced tillage technologies in corn production based on soil and crop analyses
47-54Views:123Despite new cultivation methods, the proportion of conventionally cultivated land is still very high in Hungary.
Although these technologies demand more time, labour and fuel, they are still attractive to users because they require less professional skill and simple machinery. In Hungary, conventional tillage methods usually lead to soil deterioration, soil compaction and a decrease in organic content. These side effects have caused gradually strengthening economic and environmental problems.
The technologies for those plants which are dominant on Hungarian arable lands use (winter wheat, maize, sunflower and barley) need to be improved both in the interest of environmental protection and the reduction of cultivation costs.
The Department of Land Use at Debrecen University is cooperating with KITE Sc. to carry out soil tillage experiments at two pilot locations to prove tillage technologies already used in the USA.
The aim of our examination is to adapt new technological developments and machinery, and to improve them on Hungarian soil for local environmental conditions. With these improved machines, the field growing of plants could be executed by less manipulation and better suited to economic and environmental needs. The most significant task is to investigate and improve the conventional cultivation replacing, new soil-protecting tillage technologies, and to apply no-till and mulch tillage systems.
On the basis of the experiments’ survey data, we established that the looseness and moisture content of the soil using reduced tillage is more favourable than after using conventional technologies. The results of no-till and shallow spring tillage are behind those of winter plough or disk ripper cultivation in corn yield and production elements.
To preserve moisture content in the soil, the ground clearing and sowing while simultaneously performing no-till method presents the most favourable results. The surplus moisture gained using no-till technology is equal to 40 mm precipitation.
Regarding the yield of winter wheat we established that the tillage methods do not affect plant yield. Both disk ripper and conventional disc cultivation showed nearly the same harvest results (5.55 or 5.5 t/ha), where the difference is statistically hardly verifiable from the no-till method. From the individual production of corn and the number of plants planted in unit area, calculated results prove that no significant difference can be detected between the production of winter plough and disk ripper technology. Although the yield achieved with the no-till method is less than with the previously mentioned technologies, the difference is only 9-10%. We received the lowest production at shallow spring tillage.
Evaluations have shown a 1.1 t/ha (13%) difference in the yield of maize, between winter tillage and the disk ripper method, in this case the traditional method resulted in higher yield. In winter tillage, the yield of maize was 1.9-2.1 t/ha (23-25%) higher than in the case of direct sowing and cultivator treatments. No significant difference could be noted between the yields of direct sowing and cultivator treatments.
Our research so far has proved the industrial application of reduced tillage methods in crop cultivation technologies. -
Comparison of chemical parameters of enzyme active and inactive malt types
161-166Views:199Nowadays there is an increasing emphasis on the use of raw materials. Typically, raw materials – in this study malt – are used in animal feeds and used in the brewing industry. However, in terms of quality (eg. high fibre content), these can be included in human nutrition, we have limited information on this possibility. The aim of our work was to compare different malt flours and examine the possibility of using malt in the baking industry. We were to investigate some of the most relevant parameters, such as dietary fibre content, crude protein content, fat content, carbohydrate content, dry matter content, moisture content, salt and energy content. In the future, we aim to conduct a research on some of these parameters with different malt types as the brewing industry uses novel ingredients different cereals, pseudocereals such as amaranth (Amaranthus spp.), oat (Avena sativa L.), quinoa (Chenopodium quinoa Willd.) in addition to the spring barley (Hordeum vulgare L.) or wheat (Triticum aestivum L.). Based on brewing studies, malt has a high fibre and protein content. Having these advantageous qualities, malt should be part of humans’ healthy diet. Using malt flour in the baking industry can be a new direction which can lead to creating a healthier lifestyle and healthier eating habits than suggested by the WHO (World Health Organization).
-
The role and impact of N-Lock (N-stabilizer) to the utilization of N in the main arable crops
51-55Views:214The nitrogen stabilizer called N-Lock can be used primarily with solid and liquid urea, UAN and other liquid nitrogen, slurry and manure. In corn it can be applied incorporated before sowing or with row-cultivator or applied with postemergent timing in tank-mix. In postemergent timing need precipitation for long effect. In oil seed rape and autumn cereals the N-Lock should be applied with liquid nitrogen in tank mix late winter or early spring (February-March). The dose rate is 2.5 l/ha. N-Lock increases the yield of maize, winter oil seed rape, winter wheat and winter barley 5-20 %. The yield increasing can be given the thousand grain weight. In case of high doses of nitrogen it can be observed higher yield. The quality parameter also improved, especially the oil content of winter oil seed rape and protein and gluten contents of winter wheat. The use of N-Lock increases the nitrogen retention of soil and reduces nitrate leaching towards the groundwater and the greenhouse effect gas emissions into the atmosphere. The degradation of the applied nitrogen is slowing down and the plant can uptake more nitrogen in long period. The effect of N-Lock the nitrogen is located in the upper soil layer of 0-30 cm and increasing the ammonium nitrogen form. The product can be mixed with herbicide products in main arable crops.