Search
It is one of the main topical objective to establish the conditions of sustainable farming. The sustainable development in crop production also calls for the harmony of satisfying human needs and providing the protection of environmental and natural resources; therefore, the maximum consideratio of production site endowments, the common impleme
...ntation of production needs and environmental protection aims, the minimum load on the environment and economicalness. Precision farmin encompasses the farming method which is adjusted to the given production site, the changing technology in a given plot, the integrated crop protection, cutting edge technologies, remote sensing, GIS, geostatistics, the changeof the mechanisation of crop production, and the application of information technology novelties in crop production. Modern technology increases efficiency and reduces costs. The efficiency of crop production increases by reducing losses and the farmer has access to a better decision support information technology system. In addition, we consider it necessary to examine the two currently most important economic issues: “is it worth it?” and “how much does it cost?”. During the analysis of agricultural technologies, we used the precision crop production experiment database of KITE Zrt. and the Institute for Land Utilisation, Regional Development and Technology of the Centre for Agricultural and Applied Economic Sciences of the University of Debrecen.
During our analytical work, we examined three technological alternatives on two soil types (chernozem and meadow). The first technology is the currently used autumn ploughing cultivation. We extended our analyses to the economic evaluation of satellite navigationassisted ploughing and strip till systems which prefer moisture saving. On chernozem soil, of the satellite-based technological alternatives, the autumn ploughing cultivation provided higher income than strip till. In years with average precipitation supply, we recommend the precision autumn ploughing technological alternative on chernozem soils in the future. On meadow soil, the strip till cultivation technology has more favourable economical results than the autumn ploughing. On soils with high plasticity – considering the high time and energy demand of cultivation and the short amoung of time available for cultivation – we recommend to use strip till technologies.
The necessity of application of hybrid specific crop production technology has been confirmed not only by trial results but also by the experiences gained from the agricultural practice. For this reason it is essential to test and collect data in field trials about the specific agronomic traits of the corn hybrids belonging to different maturit
...y groups and genotypes. Corn hybrids are tested for their responses to sowing time, plant density and fertilizer supply; sensitivity to herbicides; and lately, the resistance to the damages caused by the larvae of corn root worm. Last but not least, mention should be made of the differences in the responses of the corn hybrids to the damages caused by drought stress. Based on the trial results, suggestions for the hybrid specific corn production are compiled and made public for the experts and farmers engaged in corn growing. Corn hybrids may deliver maximum yields on the impact of specific crop production technology only in case if it relies on carefully done general production technology including soil cultivation, seed bed preparation and weed control. Similarly, precision crop production technology may advance the yield increase in economic way if it is constantly drawing on the source of research results.The aim of our research program is to develop the production technology and to examine the possibilities of the utilization of sweet potato (Ipomea batatas (L.) Lam.). In 2016 and 2017, production technology experiments were set up with four replications in a randomized block design on an alluvial soil in Deszk, Hungary. In our field experiment
...s, we obtained results of planting material production, planting methods and the optimized fertilization of sweet potato. Experimental plots were set up either with or without ridges. In heavy soils – where usually ridge planting is preferred –, in 2016, the production technology without ridges proved to be more effective. In 2017, however, we got opposite results: based on the result of the harvest, the production technology with ridges proved to be more effective. The transplants originating from cuttings from tubers (primary transplants) or from shoots (secondary transplants) did not show significant differences, however, in both years, yield levels were higher on ridges with secondary transplants.Sweet potato yield may vary widely among producers due to improper ridging and planting orientation. The aim of this study was to establish the proper ridging and planting orientation, so as to enhance constant reliable yields among sweet potato producing farmers.
The common carp (Cyprinus carpio L.) is the most important fish species in Hungary, it is more than 70% of the total Hungarian fish production. The common carp production is important not only just in Hungary but in Middle-East Europe, as well as Southeast Asia. Majority of the production comes from fishpond culture. If the production secto
...r wants to meet the increasing customer demands, there is need to intensify research on the intensive fish production opportunities for example all-female common carp technologies. The all-female technology is one of a genom-manipulation technology. Its production showed better growth rate than mixed-sex population in pond culture. Our experiment combined the recirculation aquaculture system (RAS) and the all-female common carp stocks intensification technologies. The reason for the experiment, is that there are no result about the growth of all-female common carp growth in RAS.The experiment used the „Tatai grey scale type” common carp stocks. We propagated two all-female stocks (T2 and T3) and a control group (TK). Due to technological characteristics of RAS, the water quality parameters were the same for all treatments and corresponded to the technological tolerance of common carp.
The experimental period was from July 10, 2019 – November 20, 2019. Result of growth performance showed that the growth of mixed-sex stock was significantly higher than all-female stocks; (Control=3692.0±590.5g, T2=3438.8±415.4g, T3=3294.1±659.1g). Feed conversation ratio (Control=1.3±0.1 T2=1.5±0.2 T3=1.6±0.5) and SGR% (Control=0.8±0.0 T2=0.7±0.1 T3=0.7±0.1) were similar.
By the results it can be said the all-female common carp technology has neither advantages nor disadvantages compared to the mixed-sex stock. The all-female technology can be beneficial if the consumers need female common carps. It is worth continuing the experiment and examine how the stocks will perform above 3kg body weight.
Maize is one of the most important crops worldwide and also in Hungary, it can be utilized for multiple purposes: as a feedingstuff, for human nutrition and for industrial processing. In the last decades, the per ha yield of maize varied greatly in Hungary, between 2004 and 2006, it was 6.82-7.56 t/ha, while in 2007, it was only 3.6 t/ha. Resul
...ting from this, the price of maize became 2-2.5 times higher. The high price hinders bioethanol production. The largest per ton amount of bioethanol, 387 l, can be produced from maize.In addition to its classical utilization as feed and food, the industrial use (especially for bioethanol production) of maize is increasin.
For industrial production, a new production technology is needed. I tested and selected hybrids appropriate for this purpose and set up fertilization and plant density experiments. The experiment were set up on chernozem soil in 2007.
The applied fertilization treatment was N 120, P2O5 80 uniformly, and five different dosages of potassium: K2O 0, K2O 100 (KCl), K2O 100 (Kornkáli), K2O 200 (KCl), K2O 200 (Kornkáli) kg/ha active ingredient. The applied plant densities were 40, 50, 60, 70, 80, 90 thousand plants/ha.
The yield of maize hybrids in the fertilization experiment ranged between 10.53 – 14.62 t/ha. Both regarding the form and dosage, 100 kg/ha Kornkáli proved to be the best potassium treatment. Regarding the inner content parameters, the highest starch content in the average of treatments was obtained for the hybrid PR36K67: 73.57%, and its yield was also the highest, so this hybrid proved to be the most suitable for bioethanol production. The highest protein content was observed for the hybrids KWS 353 (12.13%), which can be favourable for feeding purposes.
Most of the hybrids gave the highest yield at 80 thousand plants/ha plant density, however, hybrids PR36K67 and Mv Tarján achieved the highest yield at 90 thousand plants/ha.
In bioethanol production, the selection of a high-yielding hybrid with high starch content, a slight reduction of N, increase of potassium, the application of the highest plant densities of the optimum interval, harvest at full maturity (when starch content is the highest compared to protein content) are of great importance.
This paper presents the basic elements of maize production technology in Serbia. For their good knowledge, it is necessary to be familiar with the basic biological requirements of the species, phenology and its particular requirements for water, heat, soil conditions and mineral nutrition. A special emphasis in this paper is given to recent res
...earch by the author regarding the correction of production technology (selection of hybrids, time and density of sowing, etc.) from the aspect of knowing the weather conditions of the year to the moment of sowing and the amount and position of available nitrogen in the soil profile during the spring before sowing. In the light of predicted climate change conditions for the Republic of Serbia, the authors of this paper have proposed and appropriated adaptation measures. The general conclusion is that there are no general recipes for the correct production technology of this plant species, but should be adapted to each specific year, field and hybrid....5); font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px; text-decoration-style: initial; text-decoration-color: initial;">The biomass is such a row material that is available in large quantities and it can be utilizied by the biotechnology in the future. Nowadays the technology which can process ligno cellulose and break down into fermentable sugars is being researched. One possible field of use of biomass is the liquid fuel production such as ethanol production. Based on the literary life cycle analysis, I compared the starch-based (first generation) to cellulose-based (second generation) bioethanol production in my study considering into account various environmental factors (land use, raw material production, energy balance). After my examination I came to the conclusion that the use of bioethanol, independent of its production technology, is favorable from environmental point of view but the application of second generation bioethanol has greater environmentally benefits.
The pork production has changed significant in recent decades. Pig production fell significantly due to the need to adapt to new animal welfare rules in the sector. Furthermore, change in the meat consumption habit had also a negative effect on pig meat production. Hungarian pig sector and meat industry are in a difficult situation. Due to the
...high feed prices, the average production cost of pig farming has often exceeded the producer prices in recent years, therefore an increase of pig population could not be realised yet. Pig market is characterised by cyclical fluctuations of supply and prices, furthermore the decreasing producer price occurred parallel with increasing feed prices.Technology is also a critical fact in the Hungarian pig sector because there is a huge gap in the level of technology compared to that of competitive member states. With the development of production methods the efficiency of pork meat production can be improved in an environmentally friendly way.
Production of sweet potato is extending in Hungary, despite the fact that there is no field-specific production technology. Therefore, many growers cannot utilize potential yields and quality. The goal of this study was to determine the optimal production method of the Ásotthalmi 12, a Hungarian sweet potato cultivar which can adapt to the
... Hungarian climate. The effect of single and twin rows production on the yield of this cultivar was examined. The planting was carried out on June 24th, the harvesting on October 20th and the growing-season was 120 days long. Uniform nutrient supply was applied to the whole field experiment. During basic fertilization, 206 kg Knd 20 kg N, 36 kg P ha-1 were used on the soil. While forming the ridges, we used an additional 25 kg N, 45 kg P and 62.5 kg K ha-1. We adopted drip tape irrigation on the experimental field. After the planting, from the 8th week of the vegetation, another 21 kg ha-1 K, 10 kg ha-1 MgSO4, and 2 kg ha-1 Ca(NO3)2 was added in one dosage weekly, until the 13th week of vegetation. At the evaluation of the experiment, we examined the yield regarding the whole experimental plot. SPAD and fluorescence measurements were carried out on 08.16. 2019, 08.28.2019, and on 09.13.2019, during the watering break. To demonstrate the difference between the dates, we applied ANOVA and Tukey post-hoc tests. For the measurement of phytonutrients HPLC, a liquid chromatograph was used, where the carotenoid content of the Ásotthalmi 12 cultivar was determined in connection with the different production methods. Test results showed that twin rows production leads to a nearly 30% greater yield, than single row production. We determined, that the growth of yield correlates negatively to the ß-carotene content of the Ásotthalmi 12 cultivar sweet potato.The overall objectives of our research program are to examine and to develop the possibilities of use and to expand the national production technology of sweet potato. In 2016, we have set up production technology experiments in many regions, from which we report the results of the experimental field in Deszk here. In our field experiments we o
...btained results of planting material production, planting and nutrition optimization of sweet potato. Rating the effects of different nutrition doses, between the averages of treatment we didn't experience any significant differencies. On hard soil we set up experimental plots with or without ridges. Based on the result of the harvest the production technology without ridges proved to be more effective. The transplants originating from cuttings from shoots or from tubers did not show significant differences, but it does matter how many tons of sweet potato tubers we harvest per hectare.In the interest of profitable plant production and environmental protection we have to make an effort to protect and improve the productivity of our soils while moderating production limiting factors. Due to different soil cultivation methods, the quantity of yield and required expenses also differ.
We examined the production costs in four d
All economic indicators have to be compared when choosing the most suitable production technology in a specific farming environment.
In the interest of profitable plant production and environmental protection we have to make an effort to protect and improve the productivity of our soils while moderating production limiting factors. Due to different soil cultivation methods, the quantity of yield and required expenses also differ.
We examined the production costs in four d
All economic indicators have to be compared when choosing the most suitable production technology in a specific farming environment.
In the interest of profitable plant production and environmental protection, we have to make an effort to protect and improve the productivity of our soils while moderating production limiting factors. Due to different soil cultivation methods, the quantity of yield and required expenses also differ.
We examined the production costs in four
All economic indicators have to be compared when choosing the most suitable production technology in a specific farming environment.
The requirements and objective of cultivation are in constant change. For example, different cultivation systems are developed for the purpose of soil protection, the preservation of its moisture content and on soils with various precipitation supply or production site conditions. Traditionally, one of the most important cultivation aims is cro
...p needs. Further cost saving in fertilisation and crop protection can only be achieved by reducing the quality and quantity of production or it cannot be achieved at all. Furthermore, the costs can be significantly reduced by means of the rationalisation of cultivation. Energy and working time demand can also be notably reduced if ploughing is left out from the conventional tillage method. The key requirement of economicalness is to perform the cultivation at the optimal date, moisture level and the lowest possible cost.Within production costs, the cost of cultivation is between 3–17%, while they are between 8–36% within machinery costs. It is the vital condition the usability of each technological method to progressively reduce costs. Our evaluation work was carried out with the consideration of the yield data obtained from cooperating farms and the experiment database of the Institute for Land Utilisation, Regional Development and Technology of the Centre for Agricultural and Applied Economic Sciences of the University of Debrecen. Three technological methods (ploughing, heavy cultivator and loosening tillage) were used on several soil types which differ from in terms of cultivability (chernozem, sandy and sandy clay soils) from the economic/economical aspect. We examined the sectoral cost/income relation of maize production as an indicator plant. The maize price during the analytical period was 45 thousand HUF per t. On chernozem soils, the production of maize can be carried out on high income level, while maize production on sandy soils has a huge risk factor. The role of cultivation is the highest on high plasicity soils, since they have a huge energy
demand and the there is a short amount of time available for each procedure in most cases.
This study analyses how the level of postharvest technology’s development influences the economic efficiency of apple production with the help of a deterministic simulation model based on primary data gathering in producer undertakings. To accomplish our objectives and to support our hypotheses three processing plant types are included in the
... model: firstly apple production with no postharvest and prompt sale after the harvest, secondly parallel production and storage combined with an extended selling period and thirdly production and entire postharvest infrastructure (storage, sorting-ranking, packing) with the highest level of goods production and continuous sales. Based on our results it can be stated that the parallel production (plantation) and cold storage, so the second case is proved to be totally inefficient, considering that the establishment of a cold storage carries enormously high costs with resulting a relative low plus profit compared to the first type of processing plant. The reason for this is that this type is selling bulk goods without sorting-grading or packaging; storage itself – as a means of continuously servicing the market - is not covered properly by the consumers. Absolute efficiency ranking cannot be established regarding the other two processing plants: plantation without post-harvest infrastructure resulting lower NPV, but a higher IRR, DPP and PI as developing a plantation and a whole post-harvest infrastructure. Former processing plant type is favourable considering efficiency ratios describing capital adequacy, while the latter is in terms of income generating capacity.The effects of crop rotation, nutrient supply and plant protection technologies were examined on the yield of Mv PÁLMA winter wheat variety and on the most important diseases of ear and leaf. Our experiments were carried out on chernozem soil in the Hajdúság in 2006 and 2007, and three plant protection technologies (extensive, average, inten
...sive) and three irrigation variations (without irrigation, irrigated with 50 mm, irrigated with100 mm) were applied in different crop rotation systems.
In the triculture crop rotation a higher rate of infection was observed than in the biculture crop rotation, because the vegetative growth was more expressed after pea and these microclimatic factors were favourable for the development of pathogens.
In the triculture crop rotation (pea – wheat – maize) the powdery mildew, DTR and leaf rust of wheat were present in both examined years (powdery mildew 5-15%, DTR 14-42%, leaf rust 8-37% in cropyear 2005/2006, powdery mildew 12-32%, DTR 9-29%, leaf rust 8-26% in cropyear 2006/2007). Fusaria could be observed in 2006 (depending on the plant protection technologies and nutrient supply in the biculture 7-27% and in the
triculture 5-19%). With higher amounts of fertilizers the rate of infection increased and reached its maximum at the highest dose of nutrient supply (N200 +PK).
We observed the highest rate of infection by ear and leaf diseases in the case of the extensive technology, while this rate could be considerably reduced by the application of the intensive technology.
Both in 2006 and 2007, yields were the highest at the N100-200+PK levels in the triculture after pea (6028-7939 kg ha-1 in cropyear 2006, 6578-8690 kg ha-1 in cropyear 2007 depending on plant protection technologies), and at the N150-200+PK levels in the biculture after maize (6096-7653 kg ha-1 in cropyear 2006, 4974-8123 kg ha-1 in cropyear 2007 depending on the plant protection technologies). The highest yield maximums were
reached when pea was the forecrop. The yields on the experimental plots of the intensive plant protection technology was 224-2198 kg ha-1 higher (depending on the forecrop) compared to the plots where the extensive technology was used.
The highest yield without irrigation was at the N150+PK both in biculture and triculture crop rotation. Among the irrigated variations Ö2 and Ö3 at N200+PK fertilisation resulted in the highest yield in the biculture crop rotation, while the N100+PK level in triculture system. In the biculture crop rotation the extra yield was 14-51% higher (575-1225 kg ha-1 depending on plant protection technology) when 50 mm water was irrigated, and
15-54% higher (778-2480 kg ha-1) if 100 mm irrigation was applied comparing to the non-irrigated versions. The yield was 7-17% higher (560-1086 kg ha-1) in the Ö2 irrigation variation, and 8-23% (691-1446 kg ha-1) higher in the Ö3 irrigation variation compared to Ö1 irrigation variation (non-irrigated).
A correlation analysis was made to reveal the connection between the yield, the amount of fertilizers, the rate of infection, the plant protection technologies and the forecrops. Strong positive correlation (0.846) was found between year and fusaria infection. Strong positive correlation was observed between fertilization and powdery mildew infection (0.525), fertilization and DTR (0.528), fertilization and yield quantity (0.683). Lower
correlation was found between fertilization and leaf rust infection (0.409), and forecrop and yield (0.472), recpectively. Negative correlation was calcutated between plant protection technologies and DTR (-0.611), and plant protection technologies and leaf rust (-0.649).
Aquaponics is the combined culture of fish and plants in recirculating aquaculture systems, an ecologically sustainable horticultural production technique with long traditions.
The objective of this study is to compare flood-and- drain, and the water crossflow system and examine the differences in the water quality, fish yi
...eld and plant growth parameters for Common carp (Cyprinus carpio) and basil (Ocimum basilicum). During the study, water quality parameters of two treatments were compared in temperatures, pH, EC and NO3¯N were significantly different (p <0.05). Leaf area of the basil plants grew to an average of 20.37 cm2 (± 9.02 cm2). The plants’ biomass production was significantly different (p< 0.05) in the two systems. The biomass production showed lower yield, 458.22 g (± 214.59 g) in the constant flow system that in the flood- and- drain system 692.9 g (± 175.82 g). Fish Growth parameters were better in constant flow system (FCR 5.48 g/g ± 0.19). However, the specific growth rate (SGR) demonstrated that fish grew faster in flood- and- drain system 1.38 %/day (± 0.29).Despite new cultivation methods, the proportion of conventionally cultivated land is still very high in Hungary.
Although these technologies demand more time, labour and fuel, they are still attractive to users because they require less professional skill and simple machinery. In Hungary, conventional tillage methods usually lead to soil det
The technologies for those plants which are dominant on Hungarian arable lands use (winter wheat, maize, sunflower and barley) need to be improved both in the interest of environmental protection and the reduction of cultivation costs.
The Department of Land Use at Debrecen University is cooperating with KITE Sc. to carry out soil tillage experiments at two pilot locations to prove tillage technologies already used in the USA.
The aim of our examination is to adapt new technological developments and machinery, and to improve them on Hungarian soil for local environmental conditions. With these improved machines, the field growing of plants could be executed by less manipulation and better suited to economic and environmental needs. The most significant task is to investigate and improve the conventional cultivation replacing, new soil-protecting tillage technologies, and to apply no-till and mulch tillage systems.
On the basis of the experiments’ survey data, we established that the looseness and moisture content of the soil using reduced tillage is more favourable than after using conventional technologies. The results of no-till and shallow spring tillage are behind those of winter plough or disk ripper cultivation in corn yield and production elements.
To preserve moisture content in the soil, the ground clearing and sowing while simultaneously performing no-till method presents the most favourable results. The surplus moisture gained using no-till technology is equal to 40 mm precipitation.
Regarding the yield of winter wheat we established that the tillage methods do not affect plant yield. Both disk ripper and conventional disc cultivation showed nearly the same harvest results (5.55 or 5.5 t/ha), where the difference is statistically hardly verifiable from the no-till method. From the individual production of corn and the number of plants planted in unit area, calculated results prove that no significant difference can be detected between the production of winter plough and disk ripper technology. Although the yield achieved with the no-till method is less than with the previously mentioned technologies, the difference is only 9-10%. We received the lowest production at shallow spring tillage.
Evaluations have shown a 1.1 t/ha (13%) difference in the yield of maize, between winter tillage and the disk ripper method, in this case the traditional method resulted in higher yield. In winter tillage, the yield of maize was 1.9-2.1 t/ha (23-25%) higher than in the case of direct sowing and cultivator treatments. No significant difference could be noted between the yields of direct sowing and cultivator treatments.
Our research so far has proved the industrial application of reduced tillage methods in crop cultivation technologies.
The effect and interaction of crop production factors on maize yield has been examined for nearly 40 years at the Látókép Experiment Site of the University of Debrecen in a long-term field experiment that is unique and acknowledged in Europe. The research aim is to evaluate the effect of fertilisation, tillage, genotype, sowing, plant densit
...y, crop protection and irrigation. The analysis of the database of the examined period makes it possible to evaluate maize yield, as well as the effect of crop production factors and crop year, as well as the interaction between these factors.Based on the different tillage methods, it can be concluded that autumn ploughing provides the highest yield, but its effect significantly differed in irrigated and non-irrigated treatments. The periodical application of strip tillage is justified in areas with favourable soil conditions and free from compated layers (e.g. strip – strip – ploughing – loosening). Under conditions prone to drought, but especially in several consecutive years, a plant density of 70–80 thousand crops per hectare should be used in the case of favourable precipitation supply, but 60 thousand crops per hectare should not be exceeded in dry crop years. The yield increasing effect of fertilisation is significant both under non-irrigated and irrigated conditions, but it is much more moderate in the non-irrigated treatment.
Selecting the optimum sowing date is of key importance from the aspect of maize yield, especially in dry crop years. Irrigation is not enough in itself without intensive nutrient management, since it may lead to yield decrease.
The results of research, development and innovation, which are based on the performed long-term field experiment, contribute to the production technological methods which provide an opportunity to use sowing seeds, fertilisers and pesticides in a regionally tailored and differentiated way, adapted to the specific needs of the given plot, as well as to plan each operation and to implement precision maize production.
In Hungary, the growing area of potato area reduced dramatically in the last few decades, additionally we are lagging behind the Western European countries as regards yields and the competitiveness of production is further decreased by the great alternation in yields from year to year, the unpredictable market conditions, bad consumption habits
... and many times unfortunately the lack of quality products.The ecological and climatic conditions of Hungary are not everywhere suitable for potato, in the area of Debrecen the amount of rainfall was lower, and the monthly average temperature was higher than the requirement of potato in its growing season in 2002 and 2003.
The experiment was carried out at the experimental site of the University of Debrecen, Farm and Regional Research Institute, at Látókép. In our experiment we examined the yield and some quality parameters of 8 and 9 medium-early varieties in large parcels in 2002 and 2003 respectively. Out of the examined varieties 3 are of Dutch, and 6 are of Hungarian breeding.
The experiment was set up on 49.5 m2 parcels on calcareous chernozem soil after winter wheat as a forecrop in both years. The 9 varieties were examined in 4 repetitions in randomized blocks, out of which two repetitions were irrigated, and two were non-irrigated.
We examined the yields of the varieties, the distribution of tubers according to size and their percentages, and the changes in specific parameters of quality and inner content due to irrigation. We studied the dry matter content, the starch content, the under-water mass, the amount of reducing sugars, the colour index of frying and the element contents of tubers.
Summing up, it can be stated that among the agrotechnical year effect, variety and irrigation factors have considerable impact on potato yield quality and quantity. On the basis of our results, it can be stated that in potato production variety should be chosen in accordance with the aim of production and technology should be adapted to that specific variety.
In my study, I examine the possibility of the reduction of green electric power’s gross production cost. My research topic may have wider considerations, since in the case of CHP technology the utilization of by-product thermal energy is not possible, and the whole production cost devolves upon green electric power. I introduce five options f
...or the use of the heat energy, based on national and international literature and in-depth interviews.From the aspect of efficiency, it can be stated that as alternatives, beer production and desiccation may be mentioned, since these two models were appropriate for the utilization of the total quantity of waste heat, and in the given circumstances the lowest reduction of green electric power’s production costs was achieved in these cases utmost.
Our country has great traditions in the field of beef production. As early as the Middle Ages, Hungary was known as Europe’s beef exporter. In this decade, production of the Hungarian Grey has increased, due to the popular method of keeping these animals extensively. These animals were even exported to the European markets on foot.
After j
The economic activities must be judged by their effectiveness and profitability, but in most cases their effectiveness can only be seen through such outstanding facts which are independent from the farmer.
I would like to model the economy of a certain enterprise, and the size and the level of its production, through my research under the actual economic circumstances. In my research, I pay special attention to the circumstances which are important in the Hungarian agricultural sector and rural development.
For crop production and agricultural production, the most important natural resource is the soil that can optionally renew. Paralelly with this, soil plays a major role in the geological and biological cycle of elements. As a result of the big (geological) and small (biological) element cycles, the elements and combines neccessary for organisms
... can accumulate in the soil creating suitable living conditions for plants and other organisms. Soil is a heterogenous system both horizontally and vertically, and soil constituents show great variety in all the three dimensions, in addition, most of the parameters can also change between two examination dates. When talking about the factors influencing plant production, one should take into account this variation and heterogenity in time and space. When making fertilization recommendations, these factors should all be considered. In any consultation system, most of the mistakes and errors made are due to the unsatisfying soil testing and the negligence of soil heterogenity. In the practice of fertilization the biggest mistake is the improper soil sampling, then comes the methodical mistake of soil testing, which is followed by the inaccuracy of instrumental analysis and the subjectivity of result evaluation, but the latter two are negligible compared to the others. Under normal, i.e. production conditions, the quantity and distribution of nutrients in the soil are greatly dependent upon the applied technology, the amount and form of the applied natural and artificial fertilizers and the quality of fertilization.Fertilization recommendations are needed because in the layer which is accessible for plant roots only a part of the nutrient content is available for plants in a specific production cycle. An illustration of this is that though the upper 1 m layer of an average chernozem soil contains more than 5000 kg N, 12000 kg K2O and 1500 kg P2O5 (form of expression mostly used in Hungary), the application of fertilizer doses which are just fractions of these quantities is essential. This is due to the fact that the available amount of the total nutrient content depends from the quality of soil, the environmental factors (the physical and chemical qualities of the soil) and the specific nutrient’s qualities (solubility, adsorption). Knowledge of these processes and the examination of the factors influencing the actual nutrient content are vital for working out a fertilization practice, which does not put more strain on the environment than neccessary.
All of the above mentioned should be considered when applying inputs in the fields. In a well-functioning practice that considers the economic and environmental conditions (unfortunately the present production and economic conditions do not enable an appropriate level and degree), three nutrients are supplemented generally (and were supplemented in the last decades): nitrogen, phosphorus, potassium.
Studying the nutrient balance of the Hungarian field production’s last hundred years, we can draw some interesting conclusions.
The nutrient balance became positive for nitrogen and potassium in the second half of the 1960’s, while for phosphorus it was positive from the first half of the 1960’s and this period lasted until the end of the 1980’s.
Neither before the 1960’s, nor since the 1990’s has the amount of nutrients supplemented in a specific year reached the amount of the nutrient uptake of the same year.