Search

Published After
Published Before

Search Results

  • The Effect of Sowing Time and Plant Density on the Yield of MaizeHybrids
    95-104
    Views:
    71

    The crop technology of maize has two important elements, sowing time and plant density. In 2003 and 2004 we studied the effect of these two factors on the growth and production of maize in an experiment carried out near Hajdúböszörmény.
    The soil of the experimental plots was meadow soil.
    Weather in both years was differed greatly. 2003 was drought. Neither the distribution nor the quantity of the precipitation were suitable in the growing season for maize. This fact basically determined the results.
    In 2004, we could talk about a favorable and rainy season. The distribution and quantity of precipitation was suitable between April and September. The average temperature was also suitable for maize.
    Results of the sowing time experiment:
    In 2003, we tested seven hybrids at four sowing times. Hybrids in the early maturity group gave the highest yield at the later sowing time, while the hybrids of the long maturity group gave it at the earlier planting time. The yield of PR34B97, PR36N70, PR36M53 hybrids was the best at every planting time. The moisture loss of hybrids in the late maturity group was faster in the maturity season, but the seed moisture content was higher than the hybrids with early sowing time. The seed moisture content was very low due to the droughty year. In two hybrid cases, this value was higher than 20% only at the fourth sowing time.
    In 2004, we examined the yield and seed moisture content of nine hybrids. In the favorable crop year, the yield of every hybrid was the highest at the second and third sowing time. Yields of PR34H31 and PR38B85 hybrids were significant. The seed moisture content at harvest was higher than the previous year due to the rainy season. In the case of hybrids sown later, this value was higher by 30%. However, we noticed that this value was lower at the earlier sowing time than at the later.
    The crop year had a more dynamic effect on maize than the sowing time. First of all, the quantity and distribution of precipitation played an important role in respect to yield safety.
    Results of the plant density experiment:
    We tested the reaction of hybrids at four plant densities (45,000, 60,000, 75,000 and 90,000 stock/ha) every two years. In 2003, the tested seven hybrids reached the highest yield at the 90,000 stock/ha in the face of a droughty year. The effect of forecrop and favorable nutrients caused these results. In the rainy 2004 year, the yield grew linear with the growing plant density. The yield of the best hybrids were 14-15 t/ha at the 90,000 stock/ha.
    Such a high plant density (90,000 stock/ha) couldn’t adaptable in farm conditions in rainy season. It is practical to determine the interval of plant density besides the optimum plant density of hybrids which gave correct yield. The farmers have to use the low value of this interval due to the frequent of the droughty years.

  • The effect of Willow extract, Bistep and their combination on some quality parameters of lettuce (Lactuca sativa L.)
    239-247
    Views:
    148

    The research described in this paper was conducted at the University of Debrecen, Farm and Regional Research Institute in its Botanical and Exhibition Garden, Hungary. The aim was to investigate the influence of plant biostimulants on the morphological parameters of three lettuce varieties (May King, Kobak and Great Lakes). Willow bark extract and Bistep were used through irrigation and spray onto the plant leaves with the amount of 5% Willow and 0,5% Bistep. Vegetative parameters like head structure (1….10), head weight (g head-1), head closing (1….10), number of leaves, head diameter (cm), internal stem size (cm) and root weight (g head-1) were measured in 2019 and 2020. According to our results, vegetative parameters are significantly affected by plant varieties and treatments. In the experiment of 2019, important vegetative parameters were influenced by the Willow extract, while in the season of 2020 the most influenced parameters were under the impact of Bistep biostimulants followed by Willow+Bistep. However, the most favourable vegetative growth was recorded in the Kobak variety in the season of 2019 followed by May King and Great Lakes varieties in the season of 2020. On the other hand, the interaction effect of plant varieties and plant biostimulants on the vegetative parameters were varied from seasons. For example, for the season 2019, significantly the highest vegetative value was recorded for the interaction of May King variety treated with Willow extract, whereas in 2020, significantly the most influenced vegetative parameters were under the influence of the interaction of Bistep and May King variety followed by the interaction of Willow+Bistep and Kobak variety.

  • Evaluation of dry matter accumulation of maize (Zea mays L.) hybrids
    35-41
    Views:
    336

    The increase of the grain yield of maize is closely correlated with its seasonal dry matter accumulation. Dry matter is accumulated into the grain yield during the grain filling period. The following maize hybrids were involved in the experiment: Armagnac FAO 490, Loupiac FAO 380 and Sushi FAO 340. In order to determine dry matter content, two samples per week were taken on the following days: 22nd, 25th, 28th, 31st August, 4th, 7th, 14th, 18th, 22nd, 25th, 29th September and 2nd, 6th, 9th, 13th October. In the course of sampling the weight of 100 grains from the middle section of 4 ears was measured in 4 replications. Dry matter content was determined after drying to constant weight in a drying cabinet at 60 °C. Harvesting was performed on 13th October 2017.

    The daily precipitation sum was determined by local measurements, while the daily radiation and temperature data were provided by the Meteorological Observatory Debrecen of the National Meteorological Service in Budapest. Among the agrometeorological parameters, an analysis was made of the precipitation during the growing season, effective heat sums during the vegetative and generative phase, and the water supplies. The daily heat sums were determined using the algorithm proposed.

    The amount of precipitation in the winter period before the 2017 growing season was 210 mm. The soil was saturated until its field capacity. The rather dry and warm March and April had a favourable effect, but there was no worthy amount of precipitation until May (51 mm) due to the condition of the dried seedbed. Sowing was performed on the 5th of May 2017 in a randomised small plot experiment. There was favourable precipitation and temperature during the growing season, thereby providing ideal conditions for maize development, growth and yield formation. There was near average amount of precipitation in each year. The total amount of precipitation in the summer period is 342 mm. Temperature was mostly above the average, but there was no long and extremely warm period.

    The Armagnac hybrid reached its highest dry matter mass 126 days after emergence. Physiological maturity was reached sooner (on the 119th day) in the case of Loupiac, and even sooner in the case of Sushi (116th day). The thousand grain weight of Sushi (which has the shortest ripening period) was 286 g at the time of physiological maturity, while that of Loupiac was 311 g. Compared to Sushi, Armagnac showed 12 g more dry matter accumulation (306 g). In the case of all three examined hybrids, physiological maturity was preceded by an intensive phase, when the dynamics of dry matter accumulation was rather quick. On average, Sushi gained 2.8 g dry matter per day between 103 days following emergence and physiological maturity, while the same values were 3.2 g for Armagnac and 3.3 g for Loupiac. The aim of the regression line slope is to predict the behavior of the dependent variable with the knowledge of the values and characteristics of the independent variables using the regression line equation. Furthermore, to determine how the location affected the dynamic of dry matter accumulation in the Armagnac, Loupiac and Sushi hybrids. In regression analysis, the coefficient of explanation showed that the effect of day in the Armagnac was 97%, in the Loupiac 94%, in the Sushi 90 %. The determination coefficient (R2) is useful in determing how the regression equation fits. But, as we have seen, the determination coefficient alone is not sufficient to verify the model’s accuracy, in addition to the determination coefficient (R2), the normality of the data or the residuals, the variance of the variables at different levels, the independence of the data relative to time and non-oblique. Observations are evaluated for the correctness of the fitted model.

    Dry matter values decreased evenly and slightly following physiological maturity. According to our research results, it was established that physiological maturity is followed by a moderate dry matter loss. Until harvesting, Armagnac lost 40 g of its thousand mass weight in 29 days, while the same value pairs were 69 g in 36 days for Loupiac and 29 g in 39 days for Sushi. Loupiac – which had the highest weight at the time of physiological maturity – lost the most of its dry weight; therefore, Armagnac and Sushi had higher values at the time of harvesting.

  • Impact of weather on the spring crops yield in Croatia with emphasis on climatic change and the 2014 growing season
    41-46
    Views:
    156

    Main field crops in Croatia are maize, soybean, sunflower and sugar beet. By these crops are covered (status 2014) close to 50% (385 234 ha) of utilized arable land. Global warming, have often adverse influence on field crop yields. Aim of this study was testing precipitation and temperature regimes on spring crops yield in Croatia in 15-year period (1999–2013) and elaboration of the 2014 growing season with aspect of climatic change.

    Four growing seasons (2000, 2003, 2007 and 2012) were less favorable for maize because annual yield was bellow 5 t ha-1 (average 4.38 t ha-1), while in four more favorable years (2005, 2008, 2009 and 2010) annual yield was above 6.8 t ha-1 (average 7.32 t ha-1). Average precipitation and temperature for the April-September period in Osijek were 226 mm and 496 mm, 19.6 oC and 18.6 oC, for less and more favorable years, respectively. Yields of soybeans and sugar beet have mainly similar trend as maize yields in function of weather conditions, while sunflower is more susceptible to extremely moist growing seasons (for example, 2001 and 2005: 650 mm and 697 mm precipitation and very low yields in level 1.7 and 1.6 t ha-1, respectively). On the other side, under drought conditions of 2003, 2007 and 2012, yields of sunflower were above average in range from 2.5 to 2.7 t ha-1), while at same period yields of maize, soybean and sugar beet were drastically reduced.

    Average precipitation in the April-September period of 2014 for eight selected sites of Croatia was 756 mm or for 68% higher in comparison with the long-term average 1961–1990 with variation among the sites from 520 mm in Osijek to 910 mm in Varazdin. On the other side, average air-temperature in 2014 was 17.8 oC or for 0.7 oC higher with variations among the sites from 17.2 oC in Daruvar and Varazdin to 18.2 oC in Osijek and 18.3 oC in Gradiste. Under these favorable weather conditions, annual yields of maize (8.1 t ha-1), soybeans (2.8 t ha-1) , sunflower (2.9 t ha-1) and sugar beet 63.6 t ha-1) were considerable higher than usual.

  • Test of the Plant Density Reaction of Genotype Sunflower Hybrids
    113-119
    Views:
    111

    In order to produce sunflower in Hungary today it is important to develop hybrid-specific cropping technologies. The ever widening number of hybrids makes the constant examination of genotypes necessary from the viewpoint of genotype-environment interactions and critical elements. Plant density as a complex factor puts strain on the pathological features, yield and quality of sunflower. The experiment’s main objective is to find the optimal plant density for both the genotype and external factors.
    As a result it can be stated that the optimal crop density is between 45,000-75,000 plant/ha. In 2001 the optimal density was 55,000 plant/ha. The Aréna PR and the Alexandra PR hybrids produced the greatest yields (3511 kgha-1; 3338 kgha-1). In the growing season of 2002, the yields were higher than in the previous year and the optimal crop density was 45,000-65,000 plant/ha. The best yields were produced by the Aréna PR and Alexandra PR hybrids in this year again (4102 kgha-1; 4267 kgha-1) and in 2003, 45,000-65,000 plant/ha proved to be the best crop density. The highest yield was produced by the Alexandra PR.
    Analyzing the growing seasons of 2001, 2002 and 2003 it can be declared that as a result of dry climate of the three years yields were higher. It can be stated that the yield is decreased by higher than average of precipitation in the growing season.

  • The effect of sowing time on the yield and the variance of the seed moisture content a harvest of maize (Zea mays L.) hybrids
    39-49
    Views:
    90

    Sowing time is an important crop technology element of maize. We studied the effect of this factor on the growth and production of maize in an experiment carried out near Hajdúböszörmény, in 2003 and 2004, and near Debrecen, in 2005.
    The soils of the experiments were humic gley soil and chernozem. Weather in both years differed greatly. 2003 was drought. Neither the distribution, nor the quantity of the precipitation were suitable in the growing season for maize. This fact basically determined the results.
    In 2004 and in 2005, there were favorable and rainy seasons. The distribution and quantity of precipitation were suitable between April and September. The average temperature was also suitable for maize.
    In 2003, we tested seven hybrids at four sowing times. Hybrids with a shorter vegetation period gave the highest yield at the later sowing time, while the hybrids with a longer vegetation period gave them at the earlier sowing time. The yield of PR34B97, PR36N70, PR36M53 hybrids were the best at every sowing times. The moisture loss of hybrids in the late maturity group was faster in the maturity season, but the seed moisture content was higher than the hybrids with early sowing time. The seed moisture content was very low due to the droughty year. In two hybrid cases, this value was higher than 20% only at the fourth sowing time.
    In 2004, we examined the yield and seed moisture contents of nine hybrids. In the favorable crop year, the yield of every hybrid was the highest at the second and third sowing times. Yields of PR34H31 and PR38B85 hybrids were significant. The seed moisture content at harvest was higher than the previous year, due to the rainy season. In the case of hybrids sown later, this value was higher by 30%. However, we noticed that this value was lower at the earlier sowing time, than at the later.
    In 2005, we applied three sowing times. Unfortunately, the results of the third sowing time could not be analyzed, due to the low plant density. The yield of the six hybrids varied from 12 to 14 t/ha at the first sowing time. At the second sowing time, the yields fluctuated and each hybrid had the lowest yield, except the PR37D25 hybrid. At the latest sowing time, the yield of the PR34B97 hybrid was the lowest. However, this low yield was due to damage from the Western corn rootworm (Diabrotica virgifera) imago. The moisture content at harvest of the hybrids varied from 16 to 24% at the first sowing time. Yields at the second sowing time were higher. The low yield of the PR34B97 hybrid coupled with a higher seed moisture content. In addition, the maximum value of the LAI was more favourable at the first sowing time, and ranged between 5-5.5 m2/m2.
    The crop year had a more dynamic effect on maize than the sowing time. First of all, the quantity and distribution of precipitation played an important role in respect to yield safety.

  • Comparison of growth parameters of 40 varieties/clones short rotation coppice willow (Salix)
    99-104
    Views:
    123

    The plantation of willow varieties was established in 2009. The 40 different varieties and clones of Salix were planted at a research field in Kolíňany (Nitra district). The paper evaluates results from the first growing season in 2009. The survival rate of planted cuttings ranged from 55.56 % to 100.00 % after the first year. The lowest survival rate was reached by Terra Nova variety. The stem numbers per plant ranged from 1.17 ±0.37 to 2.53 ±0.98. The average height of one-year old stem varied from 65.82 ±36.60 cm to 225.58 ±68.61 cm. The average stem diameter ranged from 6.90 ±2.63 mm to 14.34 ±3.39 mm. There were statistically very significant differences in parameters of stem height stem diameter and stem numbers per plant among studied varieties/clones. The statistic method used was analysis of variance ANOVA. The varieties were then divided into 6 groups according to their similarity in observed parameters after the first growing season by cluster analysis. The best results were reached by varieties/clones classified in the second group. The survival rate, stem diameter and stem height values of these varieties/clones were above average. 

  • Effect and interaction of crop management factors and crop year on the yield of maize (Zea mays L.)
    31-41
    Views:
    186

    The aim of this study was to determine the combination of treatment levels of crop management factors which can optimize and sustain maize yield under varying climatic conditions. The effect of winter wheat forecrop, three tillage systems (Mouldboard-MT, Strip-ST, Ripper-RT), two planting densities (60,000 & 80,000 plants ha-1), three fertilizer levels (N0-control, N80, N160 kg ha-1) with four replications in irrigated and non-irrigated treatments were evaluated over a five year period, 2015–2019. The obtained results revealed that growing season rainfall positively correlated with yield, whereas, temperature negatively correlated with yield. Impact of adverse weather on yield was less severe in biculture, irrigated plots, at lower planting density (60,000), lower fertilizer rate (N80) and in RT and ST, compared to MT. In years with favorable rainfall, yields of MT and RT were significantly (P<0.05) higher than ST. However, in a less favorable year, such as 2015, with 299 mm growing season rainfall and the lowest July rainfall (59% below mean) there was no significant difference (P>0.05) in yield among the three tillage treatments. Higher planting density (80,000), and fertilization rate (N160) in tandem with MT are treatments combination conducive for high yield under favorable climatic conditions, whereas, in years with low rainfall and high temperatures, RT and ST offer alternative to MT for optimum yield with 60,000 plants ha-1 and N80 treatment level. Crop year effect accounted for 20.7% of yield variance, fertilization 35.8%, forecrop 12.8%, plant density 3.4%, tillage 1.2% and irrigation <1%. It is conclusive that with proper selection of the appropriate levels of agrotechnological inputs the adverse effect of weather on yield can be mitigated.

  • How have thermal conditions changed in different phenological stages of apple (Malus domestica) in Northeastern Hungary?
    137-142
    Views:
    29

    In temperate climates, most fruit trees need cold weather, low temperatures in winter, and a certain amount of heat during the growing season until harvest. One of the most apparent effects of climate change is the elevated temperature in all seasons of the year. In our study, the changes in thermal conditions have been calculated in Hungary's most significant growing region of apples using the Chill Unit for winters and the Growing Degree Days for summers. The meteorological data were obtained from the gridded dataset of the Hungarian Meteorological Service on a 10 km × 10 km grid, so the whole studied area is well-covered over the last 50 years. The results show that the trees are more exposed to early budding than a few decades ago. Furthermore, the accumulated heat amount in summers has increased drastically, which may increase the heat stress and lead to higher yield losses.

  • Methodology adaptation and development to assess salt content dynamics and salt balance of soils under secondary salinization
    199-206
    Views:
    142

    The effect of irrigation with saline water (above 500 mg L-1) is considered a problem of small-scale farmers growing vegetable crops with high water demand in the hobby gardens characteristic of the Hungarian Great Plain. In order to simulate the circumstances of such hobby garden, we set up an experiment including five simple drainage lysimeters irrigated with saline water in the Research Institute of Karcag IAREF UD in 2019. We regularly measured the electric conductivity (EC) of the soil referring to its salt content and the soil moisture content with mobile sensors. Before and after the irrigation season, soil samples from the upper soil layer (0-0.6 m) were taken for laboratory analysis and the soil salt balance (SB) was calculated. The actual salt balance (SBact) was calculated of the upper soil layer (0-0.6 m) based on the salt content of the obtained soil samples. The theoretical salt balance (SBth) was calculated by the total soluble salt content of the irrigation water and leachates. During the irrigation season, we experienced fluctuating EC in the topsoil in close correlation with the soil moisture content. Based on the performed in-situ EC measurements, salts were leached from the upper soil layer resulting in a negative SB. Combining SBact and SBth of the soil columns of the lysimeters, we estimated the SB of the deeper (0.6-1.0 m) soil layer. We quantified 12% increase of the initial salt mass due to accumulation. We consider this methodology to be suitable for deeper understanding secondary salinization, which can contribute to mitigating its harmful effect. By repeating our measurements, we expect similar results proving that saline irrigation waters gained from the aquifers through drilled wells in Karcag are potentially suitable for irrigation if proper irrigation and soil management are applied.

     

  • Productivity and Nutrient Reaction of Maize Hybrids
    78-83
    Views:
    71

    Several factors influence the quantity and stability of maize yield, the most important being the nutrient supply, the hybrid and precipitation. In 2004, during the maize growing season the precipitation was more than the 30 year’s average, with 68.3 mm, but the distribution was unfavorable. The experiment was carried out in Debrecen at the Experimental Station of the University of Debrecen Centre of Agricultural Sciences, Department of Crop Production and Applied Ecology. We tested 10 various hybrids with their own genetic characteristics for five different fertilizer doses, in addition to the parcels without fertilization.
    The favorable results reached were due to the rainy season. The average yield varied between 7.78-9.67 tha-1. The DK 440, PR37M34, PR38A24, PR39D81 and PR36R10 of the hybrids reacted to higher fertilizer doses with significant growth yields, the yield (more than 11 tha-1) was the highest for N200, P125, K150 fertilizing. The other hybrids, DKC 5211, Mv Vilma and MV Maraton, gave similar results at the N120+PK fertilizer dose and the ensuing doses depressed the yield. Fertilization was more effective thanks to the precipitation. The fourth and fifth dose increased or decreased maize yield depending on the nutrient reaction of the hybrid. The agro-ecological optimum of NPK fertilization was N120, P75, K90 kgha-1.
    During the experiment we tested the moisture loss of five hybrids. The rainy crop year’s effect on the seed moisture content at harvest was higher than in previous years. The seed moisture content hybrids at harvest which have shorter crop years (FAO 300) was 18-19%, and hybrids with longer vegetation periods had more than 20% seed moisture content. DK 440 hybrid had the intensive moisture loss of the five hybrids, at the start of the measurement, the seed moisture content was higher than 40%, and it decreased to 18.6% by harvesting.

  • The effect of NPK fertilization and the number of plants on the yield of maize hybrids with different genetic base in half-industrial experiment
    103-108
    Views:
    178

    In our research we examined the effect of the hybrid, the nutrient supply, the number of plants and the abiotic factors (temperature, amount of precipitation) on the yield, crop quality and yield stability of maize. We devoted special attention to the natural nutrient utilization ability and fertilizer reaction of maize.

    The experiment took place in Hajdúszoboszló on chernozem soil, on a nearly 8 ha field. The size of one plot was 206 m2, this it was a halfindustrial experiment. We tested six hybrids with different genetic characteristics and growing seasons. I analysed the correlation between the nutrient supply and the yield of maize hybrids with control treatment (treatment without fertilization) and with N 80, P2O5 60, K2O 70 kg ha-1 and N 160, P2O5 120, K2O 140 kg ha-1 fertilizer treatments. Yield increasing effect of the fertilizer also depended on the number of plants per hectare at a great extent. The number of plants of the six tested hybrids was 60, 70, and 80 thousand plants/ha.

    In Hajdúszoboszló, in 2015 the amount of rainfall from January to October was 340.3 mm, which was less than the average of 30 years by 105.5 mm. This year was not only draughty but it was also extremely hot, as the average temperature was higher by 1.7 °C than the average of 30 years. In the critical months of the growing season the distribution of precipitation was unfavourable for maize: in June the amount of rainfall was less by 31mm and in July by 42 mm than the average of many years.

    Unfavourable effects of the weather of year 2015 were reflected also by our experimental data. The yield of hybrids without fertilization changed between 5.28–7.13 t ha-1 depending on the number of plants.

    It can be associated also with the unfavourable crop year that the yield of the six tested hybrids is 6.33 t ha-1 in the average of the stand density of 60, 70 and 80 thousand plants per hectare without fertilization, while it is 7.14 t ha-1 with N80+PK fertilizer treatment. That increase in the yield is only 0.81 t ha-1, but it is significant. Due to the especially draughty weather the yield increasing effect of fertilizers was moderate. In the average of the hybrids and the number of plants, increasing the N80+PK treatment to N160+PK, the yield did not increase but decreased, which is explicable by the water scarcity in the period of flowering, fertilization and grain filling.

    The agroecological optimum of fertilization was N 80, P2O5 60 and K2O 70 kg ha-1. Due to the intense water scarcity, increased fertilization caused decrease in the yield. As for the number of plants, 70 000 plants ha-1 proved to be the optimum, and the further increase of the number of plants caused decrease in the yield.

  • The effect of plant density to the yield results and the yield components of maize hybrids
    89-93
    Views:
    133

    Maize is the crop that is produced on the second largest area in our country, in Hungary. It is planted on nearly 25% of the country’s growing area and it was produced on 1 090 439 hectares in 2016. Despite the continuous development of the biological basis and production
    technology, the growth of the yield results is not constant, its fluctuation is significant. It can be even up to 60%, because of the extremity of the years. The exploitation of the yield potential of modern hybrids is possible if we harmonize the effects of the ecological factors and properly applied instruments of agro technology and by these we ensure their interaction to reach a favorable outcome. The applied plant density is an important, well researched, but at industrial level a not enough utilized element of the maize production.
    The results of the extensive tests, done between 2009 and 2015, showed that the genotype, the year effect and the plant density are in strong correlation with each other determining the yield results. In the past seven years the examined genotypes reached the highest yield
    performance at the highest plant densities. The early hybrids (RM90–95, FAO 200–300) are capable of producing them at higher plant density, while in case of the mid and late maturity varieties the further increasing of the density after reaching the optimum level led to yield depression.
    According to our experimental results, the yield is in close positive correlation with the increase of the plant density. The effect of the growing season has great significance in forming the yield results and this determines the applicable plant density too.
    The yield of maize is determined by a resultant of components. The main component is the number of ears per plant and the amount of kernels per ear, which is calculated from the number of kernels on an ear and the weight of them. The number of the kernels on an ear is
    calculated from the number of rows on the cob multiplied by the number of seeds in one row on the cob. In dry years, at lower yield levels the yield decreases because of the shorter ears, while at the higher levels the number of kernels in a row and the thousand-kernel weight decreases,causing yield depression this way. From our examinations it turned out that the plant density reaction of a genotype is individual, every variety reaches its maximum kernel number per hectare – in other words the maximum yield - in an individual way.

  • The role of leaf area and photosynthesis in optimising the sowing date of maize
    5-10
    Views:
    120

     

    Our sowing date experiment took place in the Demonstration Garden of Institution of Plant Sciences, Agricultural Center of University of Debrecen, in 2012–2014. The thesis contains data of test year 2014. Our purpose, besides several other examinations, was to observe how sowing date influences leaf area index and activity of photosynthesis of maize hybrids, and how those factors affect fruiting. In the experiment we monitored the change of the leaf area index and the photosynthesis of hybrids with four different growing seasons.

    Based on the results, it can be concluded that most of the examined hybrids reached their smallest leaf area with the third sowing date and with the highest yield results. Hybrid Da Sonka had the largest leaf area (4.10 m2 m-2), and hybrid DKC 4590 produced the highest yield (13.16 t ha-1)

    with the third sowing date.

    During testing the photosynthetic capacity, the extremely high performance of the youngest plants with the third sowing date is outstanding, which can be explained by the different ripening periods. Examination of the correlation between the photosynthetic capacity and the yield, by linear regression analysis, also proves that photosynthesis has a determinative role in fruiting.

    The results obtained confirm that not only the environmental and agricultural factors in the growing season have effect on the yield, but also other factors like the leaf area index and the photosynthesis are determinative parameters, and all those factors together, modifying effects of each other, develop average yields.

  • The efficiency of the different elements of spring barley growing organic technology in the conditions the eastern steppe of Ukraine
    209-213
    Views:
    127

    The effectiveness the use of new nutrient complexes is studied. It is set that a combination of nutrient complexes with organic and organicmineral nutrition background promotes to good growth and development of plants during the growing season, provides the best parameters of crop yield structure and the crop yield and economic efficiency of spring barley cultivation in the condition of the Eastern Steppe of Ukraine.

  • The Effect of Year and Irrigation on the Yield Quantity and Quality of the Potato
    12-16
    Views:
    90

    In Hungary, the growing area of potato area reduced dramatically in the last few decades, additionally we are lagging behind the Western European countries as regards yields and the competitiveness of production is further decreased by the great alternation in yields from year to year, the unpredictable market conditions, bad consumption habits and many times unfortunately the lack of quality products.
    The ecological and climatic conditions of Hungary are not everywhere suitable for potato, in the area of Debrecen the amount of rainfall was lower, and the monthly average temperature was higher than the requirement of potato in its growing season in 2002 and 2003.
    The experiment was carried out at the experimental site of the University of Debrecen, Farm and Regional Research Institute, at Látókép. In our experiment we examined the yield and some quality parameters of 8 and 9 medium-early varieties in large parcels in 2002 and 2003 respectively. Out of the examined varieties 3 are of Dutch, and 6 are of Hungarian breeding.
    The experiment was set up on 49.5 m2 parcels on calcareous chernozem soil after winter wheat as a forecrop in both years. The 9 varieties were examined in 4 repetitions in randomized blocks, out of which two repetitions were irrigated, and two were non-irrigated.
    We examined the yields of the varieties, the distribution of tubers according to size and their percentages, and the changes in specific parameters of quality and inner content due to irrigation. We studied the dry matter content, the starch content, the under-water mass, the amount of reducing sugars, the colour index of frying and the element contents of tubers.
    Summing up, it can be stated that among the agrotechnical year effect, variety and irrigation factors have considerable impact on potato yield quality and quantity. On the basis of our results, it can be stated that in potato production variety should be chosen in accordance with the aim of production and technology should be adapted to that specific variety.

  • Stevia (Stevia rebaudiana B.) yield in the case of different production technologies
    71-77
    Views:
    185

    Stevia rebaudiana B. offers a natural alternative of sweetening, potential health promotion plant, and our country shows increased interest about cultivation in Hungary in addition to the neighboring European countries. The agricultural production system installation necessary
    understanding of the needs of the plant, as well as exploring the agronomic potential. Field experiments were conducted in 2015 with the aim to highlight some of the technological production parameters and correlations between them. We have reviewed the most important agronomic factors, the spacing (50×50 cm and 33×33 cm), ground covering (agro-cloth covered and uncovered/ control), their vegetative growth (first-,second-order branch), herb yield and quality in effect.
    Based on empirical evidence, that the Hungarian climates also have the opportunity of 3 cuttings during a growing season, besides of early planting, optimal climatic conditions (in October didn’t reduce the daily minimum temperature below 0 °C, after cuttings the maximum interval values remain below 40 °C), and adequate water supply and crop protection facility. The 33×33 cm spacing evaporates more than 50×50 cm spacing, because of the dense population, the continuous canopy less able to breathe, so there are serious chances to the pathogen colonization.
    Based on the results of our research to the wider 50×50 cm spacing favorable appreciate the stevia optimal progress in terms of qualitative and quantitative parameters of the yield. The stevia yields produced in the Northern Great Plains field cultivation can produce similar results as stevia crop yields in warmer climates, where the primary crops. Our research experience suggest that there is a viable domestic stevia cultivation, developing the necessary technology is still growing further investigation justifies.

  • Effect of genotypes and cropyear on thedifferent cultivation parameters of asparagus (Asparagus officinalis L.)
    31-34
    Views:
    151

    The experiments were performed in the Research Institute of Nyíregyháza Research Institutes and Study Farm, Centre for Agricultural Sciences University of Debrecen of 1500 m2 asparagus plantation. The asparagus was planted in 2011. We were determine the number of shoots, plant height and fold thicknes of asparagus hybrid. We can continuously monitored the growing parameters of asparagus. The harvest of asparagus was started in 2013, so we were able to measure to quantity. The weather was characterized by warm and matched precipitation in the growing season (April–July) in 2011 and 2012. Contrarily, the weather was very hot and dry after the late frost in 2013. The Vitalim produced the largest quantity, then the Cumulus and the end of Grolim hybrid. Number of shoot and plant height sequence is identical to the previous one. The Grolim asparagus hibrid has the largest basal diameter.

  • The effect of sowing date and plant density in three maize hybrids germination and growth dynamics
    105-110
    Views:
    159

    The maize research was set up on chernozem soil at Látókép research area of the Centre for Agricultural Sciences University of Debrecen. We examined the following hybrids SY ARIOSO (FAO 300), P9486 (FAO360), DKC 4943 (FAO 410). The experience was set u pin three different plant density. These were 60, 76 and 90 thousand plant ha-1. The experience was set up in three different sawing date, early, average and late. The germination and growing dynamic measurements was measured in three hybrid, three sawing date, three plant density in four replication. well observed at the first sawing date (April 5) the soil was too cold therefore the germination was begins very slowly to be slowly increased. The second sowing time was the average (April 21) there the germination launch as soon as possible more rapid growth in the amount of heat. We experienced the most intense germination was in the case of the emergence late sowing date (May 5). Looking at the growth dynamics for the first two sawing date was side by side and almost equal to the maximum value. This is explained by the adaptive capacity of the maize to compensate for the sawing difference. For the third time, despite the delayed sawing the maize began to grow more dynamically than in previous sawing times due to the results of the initial good conditions it growth faster than halted in the second half of the season because of the high temperatures and lack of precipitation.

  • Evaluation of mineral element content of beetroot during the different stages of the growing season
    459-469
    Views:
    247

    In modern nutrition, bioactive materials of different vegetables are especially important to be researched. The experiment was carried out on March 30, 2016 (sowing date). Mineral element content (B, Ca, Cu, Fe, K, Mg, Na, P, S, Zn) was evaluated on the 60th, 85th and the 105th day of the vegetation period. The data are presented as the mean of five varieties which can give the real state of these parameters of beetroot grown on lowland chernozem soil.

    In the young beetroot leaves (60 days) the mineral element content was higher than in the older ones (85 days). The calcium and magnesium content of the leaves was much more favourable (10 times higher) than in the root. The potassium content of leaves has reached the amount of 5000 mg kg-1, but at the same time more than 3000 mg kg-1 was detected in the improved root. This value is favourable for the potassium supply of the human organism.

    The sulphur content (1300 mg kg-1) of the leaves was the highest on the 85th day of vegetation period. Similar tendency was detected for boron content (2.45 mg kg-1), while for iron content it was higher (28.23 mg kg-1) in the younger leaves (60 days).

    Finally, it can be concluded that the increased element content of beetroot leaves will be a favourable source of mineral element supply of the human organism.

  • Production technology development of millet at different ecological conditions
    63-67
    Views:
    122

    The millet is a very special plant with good adaptation that gives the possibility for the late sowing and secondary production. However the effects of late sowing modifies the efficiency of the agrotechnological elements. The exainations – focused on this aspect – was conducted in the DU RINY and DU RIK in small plots in four replications in 2014. Among the examined factors (sowing time, nutrient supply, growing area) sowing time had the largest effect. The effectiveness of the agrotechnological elements decreases under unfavourable circumstances caused by the late sowing.

    The agrotechnical elements modifies the yields in the examined genotype. Sowing time had the biggest effect on the yields of millet. The genotype „Maxi” had the highest yield in the different treatment variations.

    The yield differences were significant between the sowing time and plant density variations, but the nutrient supply had not significant effect (the rate of precipitation was unfavourable in 2014 season).

  • Effects of agrotechnical factors on the quality and quantity of yield in winter wheat production
    69-75
    Views:
    138

    The present study was conducted to determine the effect of basic agrotechnical factors on the yield and quality of winter wheat. Two experiments were set in 2017/2018 growing season, where we studied the influence of different forecrops, fertilizing treatments and cultivars. 204 samples were measured with Single Kernel Characterization System and NIR grain analyser to determine protein (NIR-P), wet gluten (NIR-WG), Hardness Index (HI), kernel weight (KW) and kernel diameter (KD). Fertilizing had a significant effect on yield, KW, HI, NIR-P and NIR-WG, except KD. N90PK dosage was enough to realize yield potential for 6 out of 9 cultivars, but considering protein content N150PK dosage was needed. The forecrop had no significant influence on yield, KW, KD or HI, however sweet corn as previous crop had significant improving effect on NIR-P and NIR-WG compared to sunflower as forecrop. According to our data of correlation analysis, no negative relationship was found between yield and NIR-P, however HI was in medium positive correlation with NIR-P. The variety Vyckor had the highest yield, but in quality aspect, the highest NIR-P and NIR-WG values belonged to KG Kunhalom variety.

  • Effect of NPK fertilization on the yield and yield stability of different maize genotypes
    101-104
    Views:
    118

    The yielding capacity and quality parameters of 11 maize hybrids were studied in 2011 on calcareous chernozem soil in a 25-year long-term fertilization experiment in the control (without fertilization), in the base treatment of N 40 kg ha-1, P2O5 25 kg ha-1, K2O 30 kg ha-1 and in five treatments which were the multiplied doses of the base treatment. The N fertilizer was applied in the autumn and in the spring, while P and K fertilizers were applied in the autumn.The sowing time was 17–18 April, the time of harvest was 8 October. The 30-year average of precipitation (April–Sept) was 345.1 mm, the amount of precipitation did not differ greatly from that, however, its distribution was very unfavourable.
    It was found that the largest yield increment (as compared to the control) was in the treatment N 40 kg ha-1, P2O5 25 kg ha-1, K2O 30 kg ha-1 in the long-term experiment. The largest yields were obtained for the hybrids P9494, PR37N01 and PR35F38 (13.64–13.71 t ha-1). Due to the dry period at the end of the summer – beginning of autumn, the grain moisture content at harvest was favourably low, 12–18% depending on the treatment and the growing season.

    The N fertilization significantly increased the protein content of the kernel, but the starch content of the kernel decreased (significantly in several cases) with increasing fertilizer doses and yields as compared with the control.
    The highest protein content was measured in hybrids GK Boglár and Szegedi 386. The oil content was above 4% for GK Boglár, but the two hybrids were not among the best yielding hybrids in spite of their good inner content. The starch content was around 75 % without fertilization, it decreased with fertilization.
    For the tested hybrids, the fertilizer dose N 120 kg ha-1, P2O5 75 kg ha-1, K2O 90 kg ha-1 can be recommended with respect to efficacy and environmental considerations.

  • Seed biology and possibility of improvement of seed germination capacity on Virginia mallow (Sida hermaphrodita L. Rusby)
    71-76
    Views:
    136

    Sida hermephrodita or Virginia mallow is a perspective perennial herb in the Malvaceae family able to yield a biomass crop through the last two decades. Additionally, the plants have a lot of uses and benefits for instance it can use as a fodder crop, honey crop, ornamental plant in public gardens. It has favourable features like fast growing and resistance against the disease and climatic fluctuations, etc. Sida is in the beginning phase of domestication therefore it has a serious disadvantage: the low and slow germination as a big part of wild plants. Due to the expressly low germination percent the need of seed showing of driller is should tenfold, 200 thousand seeds/acre instead of 10–20 thousand what is not available and expensive Therefore practical purposes of our research of seed physiology was to increase the seed germination percent in a available, basically wild Sida population. In the first stage of our experiments we examined two factors relating to seed germination percent and seed germination power during our research: the influence of hot water treatment and the effect of exogenous or endogenous infection of seed. However, in our germination tests, utilizing scarified seeds with hot water (65 oC, 80 oC, 90 oC), from 29,3% to 46% germinated from those samples which were collected from the population of Sida hermaphrodita in Debrecen. The average germination for all season was 5–10% without treatment and rinsed using hot water up to almost 50%. When physically scarified used, the oldest seeds showed the best germination (46%) after the hot water operation in spite of the previous studies. We discovered that apparently there are close relationship between the seed fresh weight or water uptake capability and the percentage of infection. Following these recognition we modified our technique,in such a way that we fractionated the seeds based on their fresh weight/or relative density before we carried out the treatment. When we filtered the floating seeds on the surface of water, the hot water treatment was performed considerably better on the sunk seeds after separation. Therefore, by this special priming process we were able to reach 80% germination capacity of Virgina mallow seeds under laboratory conditions (26 oC without illumination).

  • Growth and clorophyll content dynamics of winter wheat (Triticum aestivum L.) in different cropyear
    101-105
    Views:
    107

    The experiments were carried out at the Látókép experimental station of the University of Debrecen on chernozem soil in a long term winter wheat experiment in the season of 2011 and 2012 in triculture (pea-wheat-maize) and biculture (wheat-maize) at three fertilisation levels (control, N50+P35K40, N150+P105K120). Two different cropyears were compared (2011 and 2012).

    The research focused on the effects of forecrop and fertilisation on the Leaf Area Index, SPAD values and the amount of yield in two different cropyears. We wanted to find out how the examined parameters were affected by the cropyear and what the relationship was between these two parameters and the changes of the amount of yield.

    Examining the effects of growing doses of fertilizers applied, results showed that yields increased significantly in both rotations until the N150+PK level in 2011 and 2012. By comparing the two years, results show that in 2011 there was a greater difference in yields between the rotations (7742 kg ha-1 at N150+PK in the biculture and 9830 kg ha-1 at N150+PK in the triculture). Though wheat yields following peas were greater in 2012, results equalized later on at N150+PK levels (8109–8203 kg ha-1).

    Due to the favorable agrotechnical factors, the leaf and the effects of the treatments grown to a great extent in 2011, while in 2012 the differences between treatments were moderate. Until the N150+PK level, nitrogen fertilisation had a notable effect on the maximum amount of SPAD values (59.1 in the case of the biculture and 54.0 in the triculture). The highest SPAD values were measured at the end of May (during the time of flowering and grain filling) in the biculture. In the triculture, showed high SPAD values from the beginning. The same tendency could be observed in the 2012 cropyear, although increasing doses of fertilizers resulted in higher SPAD values until N150+PK level only from the second measurement. Maximum SPAD values were reached at the end of May in both crop rotation system