Search

Published After
Published Before

Search Results

  • The effect of the preparation method on the physical and chemical characteristics of propolis tinctures
    163-168
    Views:
    270

    The effect of the preparation method was examined with regards to the physical and chemical characteristics of the propolis tincture, namely the extraction time and the ethanol content of the extraction solvent to the dry matter, polyphenol, flavonoid, phosphorus, calcium and copper concentration, respectively. The dry matter, the polyphenol and the flavonoid content were the lowest in the water extract of the propolis; however, significant increase was noticed depending on the extraction time. Significantly higher concentrations were found in 50 V/V% tinctures. The highest dry matter and flavonoid contents were analysed in 100 V/V% tinctures, whereas highest polyphenol content was found in 80 V/V% tinctures. However, the differences were not significant in several cases between latter tinctures. Moreover, the increase was not determined in some cases depending on the extraction time. Phosphorus and calcium concentrations were decreased depending on the increasing ethanol content, whereas copper concentration was increased up to 80 V/V%. Higher increase was found in the case of 0 and 50 V/V% extracts than in 80 and 100 V/V% tinctures. Moreover, in latter cases, no significant differences were found on several occasions, depending on the extraction time. There was no connection between the flavonoids and the calcium as well as the phosphorus content, whereas flavonoids may be made complex with copper. However, the amount of the possible complex was negligible.

  • Assessment and comparison of selenium-enriched maize with sodium selenite and sodium selenate
    11-15
    Views:
    187

    Selenium is an element of environmental interest owing to the narrow range between its nutritionally required and toxic concentrations in many organisms. Its mobility and bioavailability differ greatly depending on individual Se species. In this regard, in present study, the uptake and distribution of Se, the changes in Se content, and the effects of different concentration of Se in two forms of sodium selenite and sodium selenate on maize plants were measured in nutrient solution experiments to clarify their response to the two forms of Se. The results revealed that the Se content in shoots and roots of maize plants significantly increased as the Se level increased. Two Se forms behaved differently and the effects of toxic damage in samples which had been treated with selenite were much more than in the selenate treatments.

  • Toxic elemental content of Hungarian blaufränkisch wines
    87-90
    Views:
    181

    Toxic elemental contents are one of the food safety risks in wines. Therefore International Organization of Vine and Wine (O.I.V.) defined the limit of some elements in it. Thirty Hungarian blaufränkisch wines were analysed by ICP-MS in order to determine the concentration of toxic elements. All wines are passed by the O.I.V limits to toxic element content (Cu, Zn, Cd, Pb) according to analysis. Copper is the only outlier in some samples, but they also did not overstep the limit. In the case of zinc the maximum is approximately fourth, in case of cadmium and lead the highest concentration is less than tenth and sixth of the O.I.V. limit, respectively.

  • Comparative analysis of sample preparation methods to determine the concentration of arsenic in soil- and plant-samples
    167-170
    Views:
    165

    Arsenic contamination of the fields and groundwater is a global problem. Alföld is the most affected area in Hungary. Irrigation witharsenic contaminated water, and crop production on the contaminated soil can cause a food safety problem, because arsenic is easy taken up by the cell of the plant roots. To prevent this, very important to monitoring the arsenic content of soils and plants. Inductively coupled plasma mass spectrometry (ICP-MS) is a fast, easy method to determined the concentration of minerals in the case of plant and soil samples The analytical methods can give reliable, results if the analytical process, including the sample preparation method, is the best. The objective of this study was to compare 3 type of sample preparation method which was dry ashing, wet digestion in open system, and microwave digestion. As a result of our experiement shows the microwave digestion is the appropriate method to determined the arsenic content of soil samples. In the case of plant samples we can use wet digestion in open system or microwave digestion as a samle preparation method.

  • Effect of arsenic treatments on physiological parameters of sunflower and maize plants
    81-84
    Views:
    185

    The environment is contaminated with heavy metals and other toxic compounds. One of the most important toxic element is the arsenic (As).

    The objective of our study was to investigate the effect of As on fresh and dry weight of sunflower and maize in the early growth phases.

    Seedlings were grown in climate room on nutrient solution which were treated with 3, 10 and 30 mg kg-1 arsenic. The plants were treated separately with As(III) and As(V). After 14 day, changes in fresh and dry weight of maize shoots and roots were recorded. In the case of sunflower these parameters were measured after 21 day.

    The applied As(III) and As(V) decreased the fresh and dry mass of the shoots and roots of seedlings, especially at concentration 30 mg kg-1. We can draw the conclusion that the treatments of the maize and sunflower roots with arsenic had negative effects on the biomass accumulation. We found that the sunflower plants are more sensitive to arsenic toxicity than maize plants, and all data demonstrate that the As(III) is more toxic to these plants than the As(V).

  • Elemental content of propolis samples from Pest, Zala and Bács-Kiskun county (Hungary)
    149-153
    Views:
    255

    The elemental content of 61 raw propolis samples from Pest, Zala and Bács-Kiskun county (Hungary) were analyzed by ICP-OES. The content of Al, B, Ca, Cu, Fe, K, Mg, Mn, Na, P, S, Sr and Zn were measured in the samples. Median is higher than mean in all cases based on the summarized results. It can be explained by the outliers, moreover it has a non-normal distribution. The concentrations are in an extremely wide range, the ratio of the maximum and minimum is under 10 in case of six elements, between 10 and 35.1 in the case of other six elements,and more than 300 in case of Zn. Significant differences are between counties only in the case of B, K and P based on ANOVA. Other elements have no significant differences. The following order can be set up based on the mean concentrations and the wide ranges: K≥Ca>P≥S≥Fe≥Mg≥Al>Zn≥Na>Mn≥B>Cu≥Sr. Moreover it can be established, that the measured concentrations are near the same or in some cases lower than in other publications.

  • Effect of arsenic treatments on the element content of green peas
    203-208
    Views:
    220

    The agricultural environment is contaminated with heavy metals and other toxic elements, which means more and more threats. One of the most important toxic element is the arsenic (As).
    The objective of the study was to investigate the effect of As-treatments on the element content of the different parts of the green peas (root,stem, leaf, pod, pea) in the 4. phase of the plant development. Plants were grown in green house. Arsenic was applied in a form of arsenate (As[V]) and the plants were treated with 0, 3, 10, 30, 90 and 270 mg kg-1 arsenic.
    According to the results the Ca content of root and pod was increased in the case of the 3 mg kg-1 As-treatment, after that decreasing tendency was observed. In the case of the 270 mg kg-1 As-treatment, the Ca content in the root was increased, because some element is able to concentrate in the lower biomass. The Ca-content of stem and leaves was reduced when the plants were treated with more than 30 mg kg-1 As. The lowest As-treatment (3 mg kg-1) increased the Na content in the root, stem and leaves, however in the case of the higher As-dose, decreasing tendency was observed. In the case of the generative plant parts the 3 mg kg-1 As-treatment also increased the Na content, nevertheless in the case of the higher As-treatments lower Na content was measured, however in the case of the highest As-treatment (270 mg kg-1) the Na content was increased in the generative plant parts, probably the Na was concentrated in the lower biomass. In the case of the 90 and 270 mg kg-1 As-treatment the Mo-content also was increased in the generative plant parts. The 270 mg kg-1 As-treatment caused a similar tendency in the case of the generative plant parts as a result of the lower biomass. In the case of the pod and leaves, the lower As-doses did not cause significant changes.
    The Mo content was increased in the root and pea when the plants were treated with 3 mg kg-1 As, but in the case of the higher treatments it was decreased. In the case of the stem it was reverse, the lowest As-tretament (3 mg kg-1) decreased, nevertheless the further As-doses increased the Mo content.

  • Investigation of Chromium(III)-Picolinate Adsorption on Some Soil Types
    190-193
    Views:
    73

    In the experiment adsorption characteristics of different soil types (humic sand, meadow soil, leached chernozem and meadow solonec) was examined on the basis of adsorption isotherms for Cr(III)-picolinate. The Langmuir equation was used to describe the isotherms by which the amounts of metal ions actually and maximally adsorbed by the soils were determined concerning the given complex. A comparison was made among the organically bound Cr(III)-picolinate, an inorganic Cr(III) compound and a Cr(VI) form examined in a previous study. Based on the adsorption isotherms, adsorption capacity of the Cr(III)-picolinate was found 20 times smaller on sandy soil and 50 times smaller on the chernozem comparing to that of the inorganic Cr(III)-chloride, thus, the bio-availability of the chromium for the plants is 20 and 50 times higher in case of the given soil types. For the well-known toxic Cr(VI)-form, the adsorption was 2 times higher in case of sandy soil and 5 times higher for chernozem than in case of the organic Cr(III)-complex compound.

  • SIM Samples Investigation by Statistical Methods
    194-197
    Views:
    91

    The assessment of the present condition of the soil is very important, because the accession of the number of the European Union members is in the near future. This can be the base of the modern agrarian environmental management programme. The assessment must be objective, detailed and analyse the processes in the soil.
    Respecting the above causes was decided to create an Environmental Information Monitoring System. This system consists of more parts. One of them is the Soil Information Monitoring System (SIM). This system started to work in 1992.
    This system has two functions. Creating and actuation is obligatory from the international contracts, on the other hand the public SIM has very important role in the conservation of the soil.
    The SIM territorial measuring grid consists of 1236 measuring points. These points are representatives. The distributions of the points by the types of soil attend the variety of the types of soil of the country.
    The investigated elements in 6 types of soil were in our experiment (the group of scandium and the lanthanide series elements). There are 6 elements above the detection limit (Gadolinium, Neodymium, Praseodymium, Scandium, Samarium, Yttrium).
    The Neodymium concentration is 2 times higher than the content of Gadolinium and Yttrium.
    The Neodymium concentration is 4 times higher than the content of Praseodymium, Scandium and Samarium.
    In the case of Dysprosium, Europium, Lutetium, Terbium, Ytterbium the concentrations were below 1 mg/kg.

  • Assessment of Environmental Susceptibility/Vulnerability of Soils
    62-74
    Views:
    99

    Soils represent a considerable part of the natural resources of Hungary. Consequently, rational land use and proper soil management – to guarantee normal soil functions – are important elements of sustainable (agricultural) development, having special importance both in the national economy and in environment protection.
    The main soil functions in the biosphere are as follows: conditionally renewable natural resource; reactor, transformer and integrator of the combined influences of other natural resources (solar radiation, atmosphere, surface and subsurface waters, biological resources), place of „sphere-interactions”; medium for biomass production, primary food-source of the biosphere; storage of heat, water and plant nutrients; natural filter and detoxication system, which may prevent the deeper geological formations and the subsurface waters from various pollutants; high capacity buffer medium, which may prevent or moderate the unfavourable consequences of various environmental stresses; significant gene-reservoir, an important element of biodiversity.
    Society utilizes these functions in different ways (rate, method, efficiency) throughout history, depending on the given natural conditions and socio-economic circumstances. In many cases the character of the particular functions was not properly taken into consideration during the utilization of soil resources, and the misguided management resulted in their over-exploitation, decreasing efficiency of one or more soil functions, and – over a certain limit – serious environmental deterioration.
    Soil resources are threatened by the following environmental stresses:
    – soil degradation processes;
    – extreme moisture regime;
    – nutrient stresses (deficiency or toxicity);
    – environmental pollution.
    Environmental stresses caused by natural factors or human activities represent an increasing ecological threat to the biosphere, as well as a socio-economic risk for sustainable development, including rational land use and soil management.
    The stresses are caused by the integrated impacts of various soil properties, which are the results of soil processes (mass and energy regimes, abiotic and biotic transport and transformation and their interactions) under the combined influences of soil forming factors. Consequently, the control of soil processes is a great challenge and the main task of soil science and soil management in sustainable development.
    The efficient control of these processes necessitates the following consecutive steps:
    • registration of facts and consequences (information on land and soil characteristics, land use, cropping pattern, applied agrotechnics, yields, with their spatial and temporal variability);
    • evaluation of potential reasons (definition and quantification of soil processes, analysis of influencing factors and their mechanisms);
    • assessment of the theoretical, real, rational and economic possibilities for the control of soil processes (including their risk-assessment and impact analysis);
    • elaboration of efficient technologies for the „best” control alternatives (best management practice).
    Scientifically based planning and implementation of sustainable land use and rational soil management to ensure desirable soil functions, without any undesirable environmental side-effects, require adequate soil information. In the last years such data were organized into a computer-based GIS soil database in Hungary, giving opportunities for the quantification, analysis, modelling and forecasting of the studied environmental stresses and for the efficient and scientifically based prevention, elimination or reduction of environmental stresses and their unfavourable ecological and economical consequences.
    Special attention was paid to the assessment of various soil degradation processes, as: (1) soil erosion by water or wind; (2) soil acidification; (3) salinization and/or alkalization; (4) physical degradation (structure destruction, compaction); (5) extreme moisture regime: drought sensitivity and waterlogging hazard; (6) biological degradation; (7) unfavourable changes in the plant nutrient regime; (8) decrease of natural buffering capacity, (9) soil (and water) pollution.
    The actions against undesirable environmental stresses and their unfavourable consequences are important elements of sustainable, efficient, economically viable, socially acceptable and environmentally sound crop production and agricultural development. These are joint tasks of the state, decision makers on various levels, the land owners, the land users and – to a certain extent – of each member of the society.

  • The dual function of soil: natural resources and production site
    5-19
    Views:
    75

    First, we begin with a review of the global situation, followed by a description of that in Hungary itself. Next, we consider the conditions affecting soil utilization, and their relevant problems. Finally, we make a brief prediction of what can be expected in the coming two decades or so. For this latter reason, it is necessary to briefly illustrate the situation, processes and relationships.

  • Soil – Environment – Sustainability
    331-337
    Views:
    196

    The future and life quality of human society depends primarily on the success of the sustainable use of natural resources: the geological strata–soil–water–biota–near surface atmosphere continuum. Soil is the most significant conditionally renewable natural resource in our Earth’s system, with three unique properties: multifunctionality; fertility/ productivity; resilience. In the case of rational land use and precise soil management soil does not disappear, and its desirable „quality” does not decrease considerably, irreversibly and unavoidably. Its renewal, however, requires continuous care and permanent activities.
    Consequently, the prevention, elimination or moderation of soil degradation processes and extreme hydrological situations (the two main factors limiting desirable soil multifunctionality) with rational land use and soil management are the key factors and priority tasks of sustainable development on each level and in each phase of the decisionmaking process.