Search
Search Results
-
Development of maize production technology that increase the efficiency of bioethanol production
17-26Views:82Maize is one of the most important crops worldwide and also in Hungary, it can be utilized for multiple purposes: as a feedingstuff, for human nutrition and for industrial processing. In the last decades, the per ha yield of maize varied greatly in Hungary, between 2004 and 2006, it was 6.82-7.56 t/ha, while in 2007, it was only 3.6 t/ha. Resulting from this, the price of maize became 2-2.5 times higher. The high price hinders bioethanol production. The largest per ton amount of bioethanol, 387 l, can be produced from maize.
In addition to its classical utilization as feed and food, the industrial use (especially for bioethanol production) of maize is increasin.
For industrial production, a new production technology is needed. I tested and selected hybrids appropriate for this purpose and set up fertilization and plant density experiments. The experiment were set up on chernozem soil in 2007.
The applied fertilization treatment was N 120, P2O5 80 uniformly, and five different dosages of potassium: K2O 0, K2O 100 (KCl), K2O 100 (Kornkáli), K2O 200 (KCl), K2O 200 (Kornkáli) kg/ha active ingredient. The applied plant densities were 40, 50, 60, 70, 80, 90 thousand plants/ha.
The yield of maize hybrids in the fertilization experiment ranged between 10.53 – 14.62 t/ha. Both regarding the form and dosage, 100 kg/ha Kornkáli proved to be the best potassium treatment. Regarding the inner content parameters, the highest starch content in the average of treatments was obtained for the hybrid PR36K67: 73.57%, and its yield was also the highest, so this hybrid proved to be the most suitable for bioethanol production. The highest protein content was observed for the hybrids KWS 353 (12.13%), which can be favourable for feeding purposes.
Most of the hybrids gave the highest yield at 80 thousand plants/ha plant density, however, hybrids PR36K67 and Mv Tarján achieved the highest yield at 90 thousand plants/ha.
In bioethanol production, the selection of a high-yielding hybrid with high starch content, a slight reduction of N, increase of potassium, the application of the highest plant densities of the optimum interval, harvest at full maturity (when starch content is the highest compared to protein content) are of great importance. -
Comparative analysis of maize hybrides grown for bioethanol production purposes
11-14Views:95The objective of this study was to evaluate the effects of crop year on the main components of maize grown for bio-ethanol production yield, starch content and starch yield per hectare of maize hybrids were investigated in a droughty (2007) and in a favourable years with optimal weather conditions (2008, 2009). We measured very low starch yield (1.5 t ha-1) in the year with unfavourable precipitation supply (2007) together with higher starch content (73%). In the case of good precipitation supply we measured a much higher starch yield per hectare (7.7 t ha-1) with lower content (72.4%). In 2009 the starch content (74.5%) exceed the results of the two previous years, but on the other hand the average of starch yield was (4.9 t ha-1) which falls between the other two years values.
-
Examining reaction of sunflower genotypes on planting time on chernozem soil
93-99Views:103We studied the effect of planting time on plant pathological factors, leaf area index and yield production by applying various fungicid treatments on two different sunflower genotypes in 2013.
By delaying planting time, both the extent of Diaporthe, Alternaria and Phoma infections decreased. The differences between the volume of infections were significant in the case of the early and late sowing time results. The application of fungicide treatments induced a notable decrease in the extent of infections for all three pathogens examined. The LAI-values varied between 0.3 and 5.6 m2/m2 in 2013 depending on the hybrid, sowing time and treatment. Stocks planted at distinct times reached maximum leaf coverage at different times. The planting time and the fungicide treatment had a significant effect on the formation of the leaf area. In the case of average and late planting times, fungicide treatments elongated the preservation of the green leaf area.
With respect to the yield amount, average planting time (27 April, 2013) turned out to be optimal in 2013 (control – NK Ferti: 4.621 kg ha-1, PR64H42: 4.196 kg ha-1; double-treated: NK Ferti: 5.282 kg ha-1, PR64H42: 5.090 kg ha-1). Fungicide treatments resulted in significant yield growth in all cases during our research.
We applied Person correlation analysis to evaluate the hybrids’ sensibility to infections and our results varied in the case of Diaporthe and Phoma (r=-0.343*, -0.379**). Infections of the three pathogens were significantly reduced by delaying the planting time and applying fungicides. Late sown stocks preserved the green leaf area for a longer period. Besides, the application of the fungicide treatment and the hybrid itself also led to the preservation of the green leaf area. However, pathogens examined notably decreased the leaf area by the end of the growing year. The fungicide treatment had a remarkable effect on yield growth (r=0.603**). Furthermore, the presence of higher LAI-values in the period prior to August also induced higher yields.
-
Yield table for selected black locust (Robinia pseudoacacia L.) cultivars
193-198Views:157In Hungary, the black locust (Robinia pseudoacacia L.) can be considered as the most important fast-growing, stand-forming introduced tree species. Due to its positive growing technological characteristics as well as wood utilization possibilities, at the present, black locust is the most widely planted tree species in Hungary, covering 25% of the country’s total forest area. One of the important tasks ahead of Hungarian black locust growers is to improve the quality of black locust stands with introducing selected cultivars. For the estimation of the growth rate and yield a numerical yield table has been constructed on the basis of surveys of the experimental plots established in pure,managed ’Nyirségi’ ,’Üllői’ and ’Jászkiséri’ black locust cultivars’ plantations which can be suitable for sawlogs production. In the course of 56 stand surveys the key stand characteristics were measured, and then, were reconsidered the average height, diameter (DBH), volume, basal area and stem number given separately for the main (remaining), secondary (removal) and total stands per hectare. The programmable editing procedure allows to extention and formal change of information content of the yield table according to different demands.
-
The effect of water supply for yield formation of processing tomato
165-168Views:103The effect of irrigation on tomato yield depends on the actual weather conditions, basically the air temperature and precipitation (quantity and dispersion). The irrigated plants gave a significantly higher yield, and rainfed plants showed a yield loss. The optimum water supply treatment gave a significantly higher proportion of lycopene than the control (rainfed) treatment (89% and 80% respectively) in case of Brixsol F1 variety. In spite of this we have not found significant difference in case of Strombolino F1 (cherry type). Content of total poly-phenols measured in Strombolino F1 (cherry type) was significantly higher than that found in the Brixol F1 (normal type). The optimum water supply treatment resulted in a significantly lower content of total polyphenols in both years. Tomato fruits are rich in polyphenols the largest amount of which is rutin from among the identified components.
-
The main influencing factors effecting the yield of maize
137-141Views:88Maize is one of Hungary’s major cereals. In the 1970s and 1980s, we were in the frontline regarding yields and genetic advancement. However, yield fluctuation in maize has increased to 50-60% from 10-20% since the 1980s, which was partly caused by the increase in weather extremes due to climate change and by agrotechnical shortcomings.
The experiments were carried out on typical meadow soil in four repetitions in the period of 2007-2008. In the sowing time experiment, sowing was performed on 10 April, 25 April, 15 May under a uniform fertilization of N120, P2O580 K2O 110 kg/ha. In the fertilization experiment, the yielding capacity of 10 hybrids with different genetic characteristics was studied in a control (non-fertilized) treatment and basic treatment of N40 P2O5 25, K2O 30 kg ha-1 active ingredient and a treatment with fivefold dosages of the basic treatment. In the plant density experiment, the relationship between plant density and yield was analysed at plant densities of 45, 60 and 75 thousand plants per ha. We found a tight correlation between sowing time and yield and grain moisture content at harvest. We found that grain moisture can be reduced by 5-10% by applying an earlier sowing time.
The agroecological optimum fertilizer dosage was N 40-120, P2O5 25-75, K2O 30-90 kg ha-1 active ingredient at a plant density of 60-90 thousand plants ha-1 depending on the hybrid and the year. -
The impact of climatic factors on the relative chlorophyll content and yield of a maize hybrid in a long-term experiment
71-77Views:193The impact of the climatic factors of crop year on the relative chlorophyll content of maize was examined for three years. The examinations were carried out on the Látókép Experiment Site of the University of Debrecen on calcareous chernozem soil in a small-plot, non-irrigated long-term field experiment with strip plot design. In addition to a non-fertilised (control) treatment, nitrogen (N) fertiliser doses were applied as base and top dressing. The 60 and 120 kg N ha-1 base dressing doses were followed by two top dressing doses at the V6 and V12 phenophases.
Averaged over the different fertiliser treatments, SPAD readings increased in all three years as the growing season progressed. The highes SPAD value increase was observed in the average crop year (2017) at the V12 phenophase (11.8), which further increased at the R1 phenophas, by 3,7. No significant Spad value difference was observed between the average (2017) and the dry year (2018) at the V6 growth phase. However, in the wet crop year (2016), the V690 treatment provided the statistically highest relative chlorophyll content (46.8). At the V12 phenophase, the base dressing dose of 120 kg N ha-1+30 kg N ha-1 (V6150) showed to be successful in two years (2016 and 2018), while in 2017, the base dressing dose of A60 was successful. The impact of crop year on relative chlorophyll content can be clearly shown at the R1 growth stage. In all three years, the significantly highest relative chlorophyll content could be achieved at different nutrient levels: A60 in 2016, V6150 in 2017 and V690.
In a wet year (2016), higher yield could be achieved as a result of the 60 kg N ha-1 base dressing and 30 kg N ha-1 at the V6 growth stage (V690) as top dressing in comparison with 2017 and 2018, when higher fertiliser dose (120 kg N ha-1 base dressing and 30 kg N ha-1top dressing at the V6 growth stage) was needed to achieve a significant yield surplus.
Altogether, averaged over the different treatments, the highest yield (12.48 t ha-1) was observed in the wet year, when the relative chlorophyll content was also the highest (50.6).
-
Spatially Continuous GIS Analysis of Sampling Points Based on Yield and Quality Analysis of Sugar Beet (Beta vulgaris L.)
56-61Views:107The homogeneity of a study area of 20x20 m used for beetroot production in North-West Hungary was analysed with geo-statistical methods on the basis of measured plant and soil parameters. Based on variogram calculations (Equation 1 and 2), the yield surface showed homogeneity in North-South direction. Considering the results, decrease of sampling distance to 17 m can be suggested. The direction of the variability of yield (Figure 1) could be modelled with a direction variogram based on analysis of the variogram surface. In the study, developed methodological processes are presented for the analysis of spatial relationship between measured production and soil parameters. 5 spatial evaluation methods for yield surface were compared (Table 1). On the basis of the analysed methods, it can be stated that different methods (LP, RBF) should be used when the reasons for locally extreme yields are in focus than in case when the yield surface of the whole area is estimated (IDW, GP). Using adequate parameters the kriging method is applicable for both functions. Similarly to the results of an ordinary Pearson correlation analysis, spatial correlation analysis was shown using soil pH and Cu concentration data. The results of cross variogram analysis (Equation 2) and the North-South direction of the variogram surface showed negative correlation (Figure 3). Based on simulation calculations, decrease of 30% in sampling points resulted in increase of 12% in error for the total sample number considering Cu concentration. The method provides a tool to decrease the cost of sampling and sample analyses of spatially correlating features, and to increase the reliability of spatial estimation using a better sampling strategy with the same sample number.
-
Comparative analysis on the fertiliser responses of Martonvásár maize hybrids in long-term experiments
111-117Views:68The results of experiments carried out in the Agricultural Research Institute of the Hungarian Academy of Sciences clearly show that in the case of hybrids grown in a monoculture greater fertiliser responses can be achieved with increasing rates of N fertiliser than in crop rotations. In the monoculture experiment the parameters investigated reached their maximum values at a rate of 240 kg/ha N fertiliser, with the exception of 1000-kernel mass and starch content. In both cases the starch content was highest in the untreated control, gradually declining as the N rates increased. Among the parameters recorded in the crop rotation, the values of the dry grain yield, the 1000-kernel mass, the protein yield and the starch yield were greatest at the 160 kg/ha N fertiliser rate, exhibiting a decrease at 240 kg/ha. Maximum values for the protein content and SPAD index were recorded at the highest N rate. It is important to note, however, that although the N treatments caused significant differences compared to the untreated control, the differences between the N treatments were not significant.
In the given experimental year the values achieved for the untreated control in the crop rotation could only be achieved in the monoculture experiment at a fertiliser rate of 160 kg/ha N, indicating that N fertiliser rates could be reduced using a satisfactory crop sequence, which could be beneficial from the point of view of environmental pollution, crop protection and cost reduction.
The weather in 2006 was favourable for maize production, allowing comparative analysis to be made of the genetically determined traits of the hybrids. Among the three hybrids grown in the monoculture experiment, Maraton produced the best yield, giving maximum values of the parameters tested at a fertiliser rate of 240 kg/ha N. The poorest results were recorded for Mv 277, which could be attributed to the fact that the hybrid belongs to the FAO 200 maturity group, while the other hybrids had higher FAO numbers. Maraton also gave the highest yields in the crop rotation experiment at the 160 kg/ha N level. All three hybrids were found to make excellent use of the natural nutrient content of the soil.
It was proved that the protein content of maize hybrids can only be slightly improved by N fertilisation, as this trait is genetically coded, while the starch content depends to the greatest extent on the ecological factors experienced during the growing season. -
Nutrient and water utilisation analyses of maize on chernozem soil in a long-term field experiment
77-82Views:168We have conducted our research at the Látókép Research Farm of the University of Debrecen RISF Centre for Agricultural and Applied Economic Sciences during the cropyears of 2007, 2008 and 2009, on chernozem soil. In the case of crop rotation three models were set (mono-,bi- [wheat, maize] and triculture [pea, wheat, maize]). The five nutrient levels applied during the treatments were as follows: control [untreated], N60P45K45, N120P90K90, N180P135K135, N240P180K180. The conclusion of our results was the following: the crop rotation, the nutrient supply and the amount of precipitation all influenced the quantity of maize yield. As an effect of the increasing nutrient doses yield increase was experienced compared with the control treatments. In the average of the years the highest increase in yield excess/1 kg of NPK fertilizer was measured in the case of the monoculture (13 kg ha-1). As a consequence of is soil extorting effect the monoculture responded more intensively to the nutrient supplementation than the biculture or the triculture in the studied cropyears. In addition, we have observed that the three-year average yield amount per 1 mm precipitation was significantly influenced by the nutrient reserve of the soil. In the monoculture during the control treatment this value was 25 kg mm-1, the value measured in the case of the biculture turned out to be more favourable (42 kg mm-1).
-
Technological development of sustainable maize production and its effect on yield stability
379-388Views:156In 2015 and 2016, we examined the effect of NPK nutrients, sowing date and plant density on yield on typical meadow soil. The amount of precipitation was 282.0 mm in 2015 (January–September), 706.0 mm in 2016 and the 30-year averageis 445.8 mm.Agrotechnical factors:– Experiment a)5 Dow AgroSciences hybrid with three sowing dates and three plant densities– Experiment b)In 2015 eight, in 2016 ten hybrids with different genetic characteristics and growing seasons, with control (without fertilization), N80+PK and N160+PKtreatments, five plant densities (50–90 thousand) with 10 thousand plants difference between the different densities.
In a drought year, we reached the higher yield in the earlier sowing date and with the lower lower plant density of 70 thousand plants ha-1-. The maximum yield, depending on the agrotechnical factors, was 10–12 t ha-1 in 2015, while in 2016 it was 14–16 t ha-1. Yield stability can be increased using hybrid-specific cultivation techniques. -
Effects of plant density on photosynthetic characteristics and yield of maize under irrigation condition
115-118Views:280Maize plant response to plant density is an essential agrotechnical factor used for determining grain yield. Three plant densities (60,000 ha-1, 72,500 ha-1, and 85,000 ha-1) were used in this study to ascertain the effect of photosynthetic parameters and grain yield. Results show a significant difference in the photosynthetic parameters (SPAD, NDVI, LAI) and plant height for plant density of 85,000 ha-1. Grain yield and stem diameter were not significantly affected between the different plant densities.
-
Does drought stress always negatively affect the yield and quality of soybean in Hungary?
37-40Views:199Globally-fluctuating climate imposed serious abiotic stresses on the agricultural sector, leading to noticeable, and sometimes disastrous, losses in yields and/or quality of crops; however, in certain cases, plants could survive stress with relatively low reductions, and sometimes even with some enhancements as a reaction to changed environment, especially in the case of mild stress. An experiment was conducted in 2017 and 2018 in Debrecen, Hungary to evaluate the mild drought stress influence on the yield and quality of three soybean cultivars. The results showed that both ES Pallador and Pedro cultivars could achieve more yield when subjected to mild drought conditions; however, protein concentration was enhanced in ES Pallador whereas slightly degraded in Pedro under drought. The cultivar Pannonia Kincse followed different trend; both yield and protein concentration were reduced under drought. Oil concentration of the three cultivars did not show significant changes; however, it always followed opposite trend to that of protein concentration. It could be concluded that both ES Pallador and Pedro are recommended to be grown under rain fed conditions in Debrecen, whereas Pannonia Kincse is recommended under irrigation conditions.
-
Evaluation of the Green bean variety candidate BU-16
75-81Views:72This study presents the results of the variety comparison trials conducted with the French bean variety candidate BU-16 on sandy soil, during two years at the Research Center of the University of Debrecen.
The outstanding characteristics of this variety candidate are the early maturity, the showy pods (yellow, straight, cylindrical cross-section „pencil bean”) and the high yield potential.
The experiments were conducted with a randomized design, with five varieties and four replications. The varieties (of which two are foreign and three are domestic) were as follows: BU-16 fj, Maxidor, Paridor, Hungold and Budai piaci. The individual plots were 2 m wide and 4 m long. The seeds were sown at a density of 30 germs per m2, with a row spacing of 50 cm.
The following parameters were taken: time of flowering, time of green maturity, plant height, height of the lowest pod above ground level, number of pods per plant, distribution of the pods by the state of development (20 plants), usable pod length (1 kg of standard crop-yield), yield per hectare based on the number of plants per plot. The experiments were evaluated statistically with Excel and SPSS softwares.
Results obtained with the variety candidate BU-16:
– The time from the emergence to green maturity is 45 to 46 days, which is short as compared with the other cultivars studied.
– Plant height is 38cm (two years average), which is among the highest ones, together with Paridor.
– The pods are set high above the ground level similarly to Paridor, the height of the lowest pod is 19 cm.
– The average number of pods per plant is 13 (two years average) similarly to Paridor and to Maxidor.
– The distribution of pod size in 2007 is as follows: 68% of the pods of BU-16 is of the standars size, which is a good rate. The value of this trait for the other varieties is 60 to 63%, except for Paridor, the value of which is similar to that of BU-16.
– The usable pod length (10 to 14 cm) is 63% in 2007 and 84% in 2006. Similar pod length rates were obtained for Maxidor, while the rate for Paridor is as high as 91%.
– The total yield and the standard yield of BU-16 is among the highest ones.
According to the results obtained and presented above, the variety candidate BU-16 is the earliest maturing among the varieties tested with high yield potential which, however, is not significantly different from that of the others. Significant differences can only be detected in plant height and the number of pods per plant. Considering the results, BU-16 is to be further tested. -
The relationship between the nutrient supply and the yield of maize hybrids with different genetic traits on chernozem soil in variant years
27-31Views:187The experiments were set on lime-coated chernozem soil in 2013 and in 2014, in our study four hybrids were included with different FAO number. We studied the effect of NPK fertilization and row spacing on the yield. The fertilizer doses were based on a 25-year longterm experiment. Compared to control, the N40 +PK treatment has also achieved a significant yield increase, although some hybrids responsed with yield loss to the increasing fertilizer doses; this effect was observed especially in 2014. The majority of hybrids reached higher yields in both years using the 50 cm row spacing. The water release of hybrids was measured weekly during the maturation, at the same time points. The rainy September slowed ripening and the water release of the hybrids in 2013, so the grain wet content at harvest showed higher values. The moisture contents were increased for some hybrids, in spite of the positive and favorable dynamic of water loss.
-
Results of the sensory analysis of precision maize production
59-62Views:175This research was carried out in 2018, at the Látókép Experimental Station of the University of Debrecen in a moderately warm and dry production area, on deep humus layered medium-hard calcareous chernozem soil. In the scope of the research, the chlorophyll content of maize (Zea mays L.) was examined under field circumstances by means of local sensory measurements and we were looking for correlation between the obtained values and the amount of yield. Our measurements were carried out with Minolta SPAD-502 and GreenSeeker devices at 3 measurement times (4 leaf stage, 10 leaf stage and silking). It was found that phenological phases had an effect on the obtained SPAD and NDVI values and were in a slightly significant correlation with the yield. The most significant correlation was found between the results obtained during silking and the amount of yield. This may be because the least time has passed between the measurement time and harvest. Results obtained during the 10-leaf stage show excessive values in each case, which can be due to a measurement error. It was found that the phenological phase had an effect on the correlation of SPAD and NDVI values and the amount of yield. As the phenological phase progressed, the correlation between the measured results and yield has increased.
-
The Effect of Atmosperical Aridity on the Changes of Quantitative Parameters of Horticultural and Arable Crops
40-45Views:103The occurence of atmospherical drought causes serious water-supply problems in the most cases of our domestic agricultural plant species. This paper was studied, how can we quantificate the atmospherical drought, with the help of a low input (relative humidityof the air, temperature) index. If this index (LSZI) characterized the atmospherical drought well, it will suitable to estimate the yield amount of agricultural plants.
The index elaborated by the authors was tested on county average crop yield of 14 agricultural plant species. Moreover we compared the atmospherical drought index (LSZI) to other aridity parameters, how suitable for estimate the yield amount.
Result of experiments show that, the atmospherical drought index (LSZI) can be used well by several agricultural plant species in especially coern and sugar-beet to estimate yield amount. Excellent results were found by comparison to other aridity indexes, this means it is worth using in the aridity researches in the future. -
Examination of the population density and sowing date of different maize genotypes in the Hajdúság region
111-115Views:116The experiment was carried out 6 km from Debrecen, next to the main road 47 on a homogeneous field on brown forest soil. Five corn hybrids were tested in the trial (DKC 4795, DKC 4995, KWS Kornelius, NK Cobalt, PR37 N01) at three different sowing times (early – 5th April, average – 21st April, late – 10th May). At each sowing time, three different plant densities were applied (modest – 58 500 plants ha-1, average –70 200 plants ha-1, high – 82 300 plants ha-1). The agrotechnics applied
in the experiment satisfied the requirements of modern corn cultivation.In the study, the best yield result was achieved with the early sowing time out of the three examined sowing times (11 315 kg ha-1), which was significantly different (LSD5%=495 kg) from that of the average sowing time (10 690 kg ha-1), however, there was no statistically justifiable difference between the yield results of the early and the late sowing times. There was a significant difference also between the average and late sowing time. Our results indicate that the different sowing times resulted in a different flowering times. Consequently, the stands of early and late sowing time reached this critical stadium of growth under proper climatic circumstances (precipitation: 39 mm and 136 mm, average temperature at flowering: 18.1 oC and 20.3 oC), while flowering in the case of the average sowing time of 21st April was in the first half of July and the average temperature at flowering was warmer (23.2 oC) with only 10 mm precipitation.
In the experiment, the plant density response was also examined. According to the measured data, four of the five hybrids responded badly to the increasing plant density. We found that the plant density of 58 500 plant ha-1 gave the largest yield results (DKC 4995 11 794 kg ha-1 – NK Cobalt 10 998 kg ha-1, average of five hybrids: 11 430 kg ha-1), while the lowest yields were obtained at the plant density of 82 300 plant ha-1 (KWS Kornelius 11 037 kg ha-1 – NK Cobalt 10 019 kg ha-1, average of five hybrids 10 720 kg ha-1). The difference between the two plant densities was significant (LSD5%=494 kg), however, the 70 200 plant ha-1 plant density did not show any statistical difference from neither the 58 500 ha-1 nor from the 82 300 plant ha-1 stands. When examining the data of the hybrids separately, we found that there was a significant difference between the average yield of the lowest and highest plant densities only in the case of three (DKC 4795, DKC 4995, NK
Cobalt) out of the five hybrids (DKC 4795: 11 757 kg ha-1 – 10 857 ha-1 where LSD5% =816 kg; DKC 4995: 11 794 kg ha-1 – 10 738 kg ha-1 where LSD5%=853kg; NK Cobalt: 10 998 kg ha-1 – 10 019 kg ha-1 where LSD5%=630 kg ha-1), while a significant difference between the second and third plant densities was observed only in one case (DKC 4995: 11 726 kg ha-1 – 10 738 ha-1 where LSD5%=853 kg). In all other cases, there was no statistical difference between the different
plant densities. -
Interaction of yield stability and year in major agricultural crops
41-46Views:85The effect of hydro-meteorological extremities on plant cultivation is the result of the correlation of many factors. These may increase or decrease the effects of hydro-meteorological extremes. The degree of this variance depends on the professionality of treatments, on the quality of the applied technique and technology and also on the soil’s water management characteristics.
The water management characteristics of Hungary’s arable land are mainly unfavorable or medium. In the past two decades the conditions of originally good soils, from a water management aspect, have significantly deteriorated in the critical 0-60 cm soil layer. This is mainly due to unprofessional land use, a lack of deepening cultivation and neglected organic cultivation. At the same time, hydro-meteorological extremities occur more frequently and the sensibility of plant cultivation has increased.
The sensibility of plant cultivation is type and location specific, yet, it also effects both the quality and quantity of the result.
The stability analysis, which covered the period of four decades and incorporated 6-7 agro-ecological areas proves and highlights the following:
• Winter wheat only reacted to extensive cultivation and unfavorable environmental conditions to a small degree. On the other hand, the effect of hydro-meteorological extremities increases.
• The stability analysis of maize, which is sensitive to cultivation technology and the location of cultivation, proved just the opposite. Good soil and adequate technology significantly reduces the effect of any particular year.
• From the years examined, the most favorable proved to be the one with average precipitation. Maize reacted to both extremities in a similar way. Winter wheat reacted to more precipitation with less yield.
• The yield quality of winter wheat was negatively effected by drought. The negative effect of precipitation is limited to the period of ripening and harvest, so the likelihood of such an effect is not significant.
• The yield of sunflower – due to pests – significantly reduces in years with high precipitation, while a difference between dry and average years cannot be pinpointed out. The oil content in both dry years and in years with high precipitation is evident, compared to years with average precipitation.
• The root yield of sugar beet is reduced by drought while the sugar content depends on soil characteristics and climatic extremities. A difference could also be noted by location, whether in Western Hungary and on the Great Plain. Great sugar content can be achieved in years with high precipitation in Western Hungary, while the same result occurred with average precipitation on the Great Plain. Drought did not have a positive effect on sugar content in either location. -
Investigation of combining ability and superiority percentages for yield and some related traits in yellow maize using line × tester analysis
5-14Views:231Combining ability estimation is an important genetic attribute for maize breeders in anticipating improvement in productivity via hybridization and selection. This research was carried out to investigate the genetic structure of the 27 F1 maize hybrids established from nine lines derived from Maize Research Department and three testers, to determine general combining ability (GCA), determine crosses showing specific combining ability (SCA) and superiority percentages for crosses. Nine lines, three testers, 27 F1 hybrids and two check commercial hybrids (SC162 and SC168) were studied in randomized complete block Design (RCBD) with three replications during 2016. The results of mean squares showed that significant and highly significant for most studied traits (days to 50% tasseling, days to 50% silking, plant and ear height, ear position, ear length, no. of kernels per row, 100-kernel weight and Grain yield). Estimates of variance due to GCA and SCA and their ratio revealed predominantly non-additive gene effects for all studied traits. Lines with the best GCA effects were: P2 (line 11) and P6 (line 21) for grain yield, for testers Gm174 and Gm1021 had significant GCA effects for grain yield. The hybrids P5×Gm1021, P6×Gm1021, P7×Gm1021, P8×Gm1002, P9×Gm1002 had significant and negative SCA effects for grain yield. Crosses P1×Gm174, P2×Gm1002, P5×Gm1021, P6×Gm174, P6×Gm1021, P7×Gm1021, P8×Gm1002, P9×Gm1021 were the best combinations manifested and significant superiority percentages over than check varieties (SC162 and SC168) for most studied traits. Therefore, these hybrids may be preferred for hybrid crop development.
Abbreviations: GCA general combining ability; SCA specific combining ability
-
Complex appreciation of agrotechnikal factors of sweet corn (Zea Mays L. convar. saccharata Koern.)
77-81Views:111Three agrotechnical factors (sowing time, fertilization, plant density) and the effect of two different genotypes on the yields of sweet corn was studied, in the dry and warm crop-year of 2009 on a chernozem soil in the County of Hajdúság. The experiments were carried out on the Látókép Research Station of Debrecen University. The experiment involved two sowing times (21 of April and 19 of May), six fertilizer levels (control, N30+PK, N60+PK, N90+PK, N120+PK, N150+PK) and two genotypes (Jumbo, Enterprise). Four plant density levels, 45 thousand ha-1, 55 thousand ha-1, 65 thousand ha-1 and 75 thousand ha-1 were used. In the early sowing time the highest yield was obtained with 65 thousand ha-1 plant density level and N120+PK treatment of Jumbo (18169 kg ha-1), while the maximum yield of Enterprise was 17818 kg ha-1 with 75 thousand ha-1 plant density level and N90+PK dose. In case of the late sowing time both hybrids gave the highest yield with 75 thousand ha-1 plant density level and N30 +PK
treatment, with a crop yield of 13143 kg ha-1 (Jumbo) and 14324 kg ha-1, ( Enterprise). -
Agronomic research in Martonvásár, aimed at promoting the efficiency of field crop production
89-93Views:115The effect of crop production factors on the grain yield was analysed on the basis of three-factorial experiments laid out in a split-split-plot design. In the case of maize the studies were made as part of a long-term experiment set up in 1980 on chernozem soil with forest residues, well supplied with N and very well with PK. The effects of five N levels in the main plots and four sowing dates in the subplots were compared in terms of the performance of four medium early hybrids (FAO 200). In the technological adaptation experiments carried out with durum wheat, the N supplies were moderate (2010) or good (2011), while the P and K supplies were good or very good in both years. Six N top-dressing treatments were applied in the main plots and five plant protection treatments in the subplots to test the responses of three varieties.
The results were evaluated using analysis of variance, while correlations between the variables were detected using regression analysis.
The effect of the tested factors on the grain yield was significant in the three-factorial maize experiment despite the annual fluctuations, reflected in extremely variable environmental means. During the given period the effect of N fertilisation surpassed that of the sowing date and the genotype. Regression analysis on the N responses for various sowing dates showed that maize sown in the middle 10 days of April gave the highest yield, but the N rates required to achieve maximum values declined as sowing was delayed.
In the very wet year, the yield of durum wheat was influenced to the greatest extent by the plant protection treatments, while N supplies and the choice of variety were of approximately the same importance. In the favourable year the yielding ability was determined by topdressing and the importance of plant protection dropped to half, while no significant difference could be detected between the tested varieties. According to the results of regression analysis, the positive effect of plant protection could not be substituted by an increase in the N rate in either year. The achievement of higher yields was only possible by a joint intensification of plant protection and N fertilisation. Nevertheless, the use of more efficient chemicals led to a slightly, though not significantly, higher yield, with a lower N requirement. -
Efficiency of Fertilization in Sustainable Wheat Production
59-64Views:94In sustainable (wheat) production plant nutrition supply and fertilization play decisive roles among the agrotechnical elements, because of their direct and indirect effects on other agronomical factors.
In long-term experiments, we studied the roles of agroecological, genetic-biological and agrotechnical factors in the nutrient supply, fertilization and its efficiency in wheat production under continental climatic conditions (eastern part of Hungary, Trans-Tisza) on chernozem soil. Our results have proved that there are different (positive and negative) interactions among ecological, biological, and agrotechnical elements of wheat production. These interaction effects could modify the nutrient demand, fertilizer (mainly nitrogen) response of wheat varieties and efficiency of fertilization in wheat production.
The optimum N-doses (+PK) of wheat varieties varied from 60 kg ha-1 (+PK) to 120 kg ha-1 (+PK) depending on cropyears, agrotechnical elements and genotypes. The winter wheat varieties could be classified into 4 groups according to their fertilizer demand, natural and fertilizer utilization, fertilizer response and yield capacity.
Appropriate fertilization (mainly N) of wheat could affect both the quantity and quality of the yield. By using optimum N (+PK) fertilizer doses, we could manifest genetically- coded baking quality traits of winter wheat varieties and reduce quality fluctuation caused by ecological and other management factors. The efficiency of fertilization on different baking quality parameters (wet-gluten, valorigraph index etc) were variety specific (the changes depended on genotypes).
Our long-term experiments proved that appropriate fertilization provides optimum yield, good yield stability and excellent yield quality in sustainable wheat production. We could this get better agronomic and economic fertilization efficiency with less harmful environmental effects. -
The impact of grain maize and sunflower as previous crops on the yield and ear number of winter wheat in a long-term experiment
75-79Views:118We have analyzed the effect of grain maize and sunflower forecrop on three different winter wheat genotype (GK Csillag, Mv Csárdás, Mv Toldi) regarding to the spike number and yield in different fertilization levels in the 2012/2013 cropyear. According to our data after sunflower forecrop we reached higher spike number and yield, which were influenced by the differences of the varieties. We found significant differences between the varieties in the control treatment. According to our research, GK Csillag has reached the highest yield in the examined fertilization levels and forecrop models too.
-
Analysis of the photosynthetic parameters, the yield and the quality of winter wheat
101-106Views:125The environmental adaptability of crop production is basically determined by the selection of biological background (plant species and
varieties) suitable for the region and the site. The aim of our work is to parametrize the plant assimilation, its intensity, dynamics and the
most important characteristics and the relationships to the quality in winter wheat trials. The measurements were carried out at the research
site of the University of Debrecen in small parcel experiments. We measured the leaf net CO2 assimilation rate, stomatal conductance,
intercellular CO2 level, the transpiration, the leaf temperature and the air temperature by the LICOR LI-6400 portable photosynthesis
system in field trials on the nutrient supply. The soil of the experimental area is calciferous chernozem with favorable water regime.
We have examined the photosynthetic activity, the productivity and yield stability of winter wheat varieties. We have compared the yield
results, at similar agrotechnical conditions in seven cropyears. We also determined the quality parameters of the winter wheat varieties.
Then we valued the yield stability of genotypes with the help of analysis of variance and linear regression equations. We have defined the
connections between assimilation parameters, the yield stability and quality parameters of wheat varieties.