Search
Search Results
-
The effect of NPK fertilization and the number of plants on the yield of maize hybrids with different genetic base in half-industrial experiment
103-108Views:178In our research we examined the effect of the hybrid, the nutrient supply, the number of plants and the abiotic factors (temperature, amount of precipitation) on the yield, crop quality and yield stability of maize. We devoted special attention to the natural nutrient utilization ability and fertilizer reaction of maize.
The experiment took place in Hajdúszoboszló on chernozem soil, on a nearly 8 ha field. The size of one plot was 206 m2, this it was a halfindustrial experiment. We tested six hybrids with different genetic characteristics and growing seasons. I analysed the correlation between the nutrient supply and the yield of maize hybrids with control treatment (treatment without fertilization) and with N 80, P2O5 60, K2O 70 kg ha-1 and N 160, P2O5 120, K2O 140 kg ha-1 fertilizer treatments. Yield increasing effect of the fertilizer also depended on the number of plants per hectare at a great extent. The number of plants of the six tested hybrids was 60, 70, and 80 thousand plants/ha.
In Hajdúszoboszló, in 2015 the amount of rainfall from January to October was 340.3 mm, which was less than the average of 30 years by 105.5 mm. This year was not only draughty but it was also extremely hot, as the average temperature was higher by 1.7 °C than the average of 30 years. In the critical months of the growing season the distribution of precipitation was unfavourable for maize: in June the amount of rainfall was less by 31mm and in July by 42 mm than the average of many years.
Unfavourable effects of the weather of year 2015 were reflected also by our experimental data. The yield of hybrids without fertilization changed between 5.28–7.13 t ha-1 depending on the number of plants.
It can be associated also with the unfavourable crop year that the yield of the six tested hybrids is 6.33 t ha-1 in the average of the stand density of 60, 70 and 80 thousand plants per hectare without fertilization, while it is 7.14 t ha-1 with N80+PK fertilizer treatment. That increase in the yield is only 0.81 t ha-1, but it is significant. Due to the especially draughty weather the yield increasing effect of fertilizers was moderate. In the average of the hybrids and the number of plants, increasing the N80+PK treatment to N160+PK, the yield did not increase but decreased, which is explicable by the water scarcity in the period of flowering, fertilization and grain filling.
The agroecological optimum of fertilization was N 80, P2O5 60 and K2O 70 kg ha-1. Due to the intense water scarcity, increased fertilization caused decrease in the yield. As for the number of plants, 70 000 plants ha-1 proved to be the optimum, and the further increase of the number of plants caused decrease in the yield.
-
The analysis of the fair data of a solar energy power plant with SPSS
60-63Views:88The use of fossil energy sources greatly damages the environment. Moreover, the quantity of these energy sources is limited. Therefore, it is important to increase the share of renewable energy sources (solar, wind, water and biomass) in energy generation.
Huge amounts of energy (1100-1300 kWh/m2 per year) arrive at the earth from the sun, and are utilized in passive and active ways. One of the active applications is photovoltaic current production, in the course of which electricity is produced directly with PV – panels. This can be fed into a grid. At the University of Debrecen is a solar energy power plant from September 2005 in operation. The electricity performance of the incorporated PV-panels (Kyocera, Dunasolar, and Siemens) are 8.64 kW. The are of PV – panels is 110 square meter. With the aid of the data storage, the tension, current, temperature of the PV-panels, global radiation, air temperature, wind speed, wind direction and the achievement is measured by the ac network.
The effect of the shading on the performance of the PV – panels and the solar energy power plant is examined. The analysis and the graphic representation of the experiment results are carried out with SPSS per grief. We produced per grief. -
Laboratory and small plot fungicide trials to control potato late blight (Phytophthora infestans) next to Sepsiszentgyörgy town (Romania)
72-72Views:115Our experiments were carried out during 2009 and 2010 years on Szépmező field, next to the Sepsiszentgyörgy town, Kovászna county, Romania. The experimental area situated at 520 - 580 m altitude, its soil is a humus rich chernozem, the yearly average temperature is between 7 - 8 oC, the precipitation is 500 - 600 mm/year. 7 different fungicides efficacy were studied for control to potato late blight disease caused by Phytophthora infestans on three potato varieties, viz. Ostara, Santé and Desirée.
In the laboratory the fluanizam (500 g/L, ALTIMA 500) fungicide was the best in inhibition of growing fungus while on the field trial plots cymoxanil + famoxadone (22.1 + 16.6%, EQUATION PRO WP*) and metalaxyl** + mancozeb (200 g/L + 1.600 g/L, RIDOMIL MZ 72WP) were the most effective. This facts were confirmed by statistic Duncan-test and data of yields.
The appearance of Phytophthora infestans epidemic was influenced by the climate conditions too during May and June when the minimum temperature was 12 oC, and the maximum 20 oC, the rain quantity more than 120 mm, the air humidity above 75%, these conditions promote the appearance and spread of fungus.
-
Examination of plant number and sowing date in different crop years
79-82Views:99We examinated three agrotechnical factors in 2011, 2012 and 2013 (sowing time, nutrient factor and plant density), as well as five different effects of genotypes on the crop of corn, on brown soil in the Hajdúság. The experiment was set next to the 47 main road in Debrecen, at the 6th kilometre stone.
In the present processing I would like to touch on the effects of sowing time and plant density, as I do not have the chance to present the whole experiment results here. It is true for all three years that the humidity factors differ from the long years’ average, so the genotypes had different reactions on it. According to our results we found out that the late sowing time’s result had the most successful crop yield result with 9975 kg ha-1, while examining the plant density the result of the highest plant density proved to be the best with 9967 kg ha-1.
We take the critical season in corns’ life cycle process into consideration when examining the results: June, July and August months’ humidity and temperature markers. According to the results in the tested 3 months we had 227 mm humidity with 10 days, when the average temperature was over 25 °C. The same factors in 2012 were 135.5 mm humidity with 37 days of average temperatures of 25 °C and in 2013 we recorded 102.5 mm humidity with 24 of these days.
Our goal is to help the farmers in the Hajdúság with the results of our sowing times, hybrid choice and plant density results.
-
Examination of the population density and sowing date of different maize genotypes in the Hajdúság region
111-115Views:115The experiment was carried out 6 km from Debrecen, next to the main road 47 on a homogeneous field on brown forest soil. Five corn hybrids were tested in the trial (DKC 4795, DKC 4995, KWS Kornelius, NK Cobalt, PR37 N01) at three different sowing times (early – 5th April, average – 21st April, late – 10th May). At each sowing time, three different plant densities were applied (modest – 58 500 plants ha-1, average –70 200 plants ha-1, high – 82 300 plants ha-1). The agrotechnics applied
in the experiment satisfied the requirements of modern corn cultivation.In the study, the best yield result was achieved with the early sowing time out of the three examined sowing times (11 315 kg ha-1), which was significantly different (LSD5%=495 kg) from that of the average sowing time (10 690 kg ha-1), however, there was no statistically justifiable difference between the yield results of the early and the late sowing times. There was a significant difference also between the average and late sowing time. Our results indicate that the different sowing times resulted in a different flowering times. Consequently, the stands of early and late sowing time reached this critical stadium of growth under proper climatic circumstances (precipitation: 39 mm and 136 mm, average temperature at flowering: 18.1 oC and 20.3 oC), while flowering in the case of the average sowing time of 21st April was in the first half of July and the average temperature at flowering was warmer (23.2 oC) with only 10 mm precipitation.
In the experiment, the plant density response was also examined. According to the measured data, four of the five hybrids responded badly to the increasing plant density. We found that the plant density of 58 500 plant ha-1 gave the largest yield results (DKC 4995 11 794 kg ha-1 – NK Cobalt 10 998 kg ha-1, average of five hybrids: 11 430 kg ha-1), while the lowest yields were obtained at the plant density of 82 300 plant ha-1 (KWS Kornelius 11 037 kg ha-1 – NK Cobalt 10 019 kg ha-1, average of five hybrids 10 720 kg ha-1). The difference between the two plant densities was significant (LSD5%=494 kg), however, the 70 200 plant ha-1 plant density did not show any statistical difference from neither the 58 500 ha-1 nor from the 82 300 plant ha-1 stands. When examining the data of the hybrids separately, we found that there was a significant difference between the average yield of the lowest and highest plant densities only in the case of three (DKC 4795, DKC 4995, NK
Cobalt) out of the five hybrids (DKC 4795: 11 757 kg ha-1 – 10 857 ha-1 where LSD5% =816 kg; DKC 4995: 11 794 kg ha-1 – 10 738 kg ha-1 where LSD5%=853kg; NK Cobalt: 10 998 kg ha-1 – 10 019 kg ha-1 where LSD5%=630 kg ha-1), while a significant difference between the second and third plant densities was observed only in one case (DKC 4995: 11 726 kg ha-1 – 10 738 ha-1 where LSD5%=853 kg). In all other cases, there was no statistical difference between the different
plant densities. -
The effect of plant density on maize yield in average and extremely dry years
7-16Views:85The yield safety of maize has not been satisfactory in Hungary for decades. Yield is influenced by the combination of several factors.
In recent years, the frequency of dry years increased and fertilization decreased. These factors call for a rational determination of the plant density.
I studied the relationship between plant density and yield in 2003-2004 and 2007 on meadow soil.
In 2003, the weather was dry. In the vegetation period, the amount of precipitation was 78.5 mm lower and the temperature was 0.97 °C higher than the average of 30 years, the number of hot days was 47-60 (days with a temperature higher than 30 °C). However, we obtained favourable results under experimental conditions in 2003 after wheat as a forecrop using the fertilizer Kemira Power.
The weather in 2004 was favourable. In the vegetation period, the amount of precipitation was 93.2 mm higher than the average of 30 years. Although, the distribution of the precipitation could have been more favourable. The yield of the hybrids ranged between 8.87-10.42 t/ha. Among the studied seven hybrids, the early hybrids gave the highest yield at the highest plant density of 90 thousand plants/ha (PR38Y09, PR38A67, PR37D25, PR37M34). However, FAO 400-500 hybrids gave favourable results also at the low plant density of 45 thousand plants/ha (8-9 t/ha). At this plant density, the aeration of the plant stock was better and the hybrids were prone to bringing several cobs. Yield stagnated with increasing plant density (60 thousand plants/ha), then at 75-90 thousand plants per ha, the yield started to increase again.
In 2004 the yield of hybrids was considerably higher than in the previous year. In contrast to yields of 8.87-10.42 t/ha in 2003, yields in 2004 were around 9-12 t/ha.
The yield of the hybrid XO 902 P is above 12 t/ha already at a plant density of 45 thousand plants/ha. It gives maximum yield at the plant density of 90 thousand plants/ha.
The hybrid PR38P92 showed a good response to changing plant density, but its yield was only 9 t/ha at the low plant density value.
In a favourable year, the yield of the hybrids PR38B85, PR37W05, PR37D25, PR37K85 at a plant density of 45 thousand plants/ha 11 t/ha, while at the higher plant density of 90 thousand plants/ha, it ranges around 13-15 t/ha.Hybrids PR36K20, PR35Y54, PR34H31 have a good individual yield and they are prone to bringing several cobs in favourable years at a low plant density. Their maximum yield at the plant density of 90 thousand plants/ha is almost 16 t/ha.
In 2007, the weather was similar to that of the extremely dry year of 2003. The amount of precipitation in the vegetation period was 41.9 mm lower than the average of 30 years and its distribution was not favourable either.
In the optimum NPK fertilizer treatment at an optimum plant density, the yield of hybrids ranged between 9.32-10.73 t/ha. The highest yields of 10.22-10.73 t/ha were measured for hybrids PR38A79 (FAO 300) and PR35F73 at a relatively low plant density of 60 thousand plants/ha.
In the average of the hybrids, the optimum NPK dosage was N 131, P2O5 82, K2O 93 kg/ha active ingredient. -
Ovarian performance of Barbados Blackbelly and Dorper crossbred ewes in the mirror of body conditions
23-26Views:75The aim of examination was to detect the puberty and to follow the ovarian cycle of Barbados Blackbelly×Dorper ewes in connection with their body conditions and the effects of meteorological parameters. The blood samples had been taken from 17th of November 2008 untill 08th of June 2009 for analyzing the progesteron concentrations, establishing whether they showed perpetual ovarian performance or not. The end of examination
was timed due to releasing the ram in middle of May 2009.
The daily avarage bodyweight-growth is well featured by the bodyweight tendence. The body conditions were evaluated by ultrasound tissue examination.
During the full length of the examination the avarage daily temperature, the avarage humidity level and also the number of daily sunlighted hours were served by the Agrometeorological Observatory of the University of Debrecen.
The bodyweight tendence and the meteorological parameters were correlated to the breeding season of ewes. In conclusion the bodyweights and their tendences at the young age and the body condition parameters measured at certain anatomical areas can influence the length of the breeding season of the ewes. However the number of daily avarage sunlighted hours, the daily avarage temperature and also the humidity did not effect the cyclic ovarian perfomance of the Barbados Blackbelly×Dorper ewes in Hungary. -
Genetic diversity study of Hungarian honey bee (Apis mellifera L.) colonies – Previous announcement
61-64Views:146In Hungary, the Apismelliferacarnica is the native breed which is the only recognised and breedable honey bee in the country. It is assumed that there are a number of non-native and hybrid honey bee breeds in Hungary. The microsatellite and mitochondrial DNA surveys applied here will be utilised to easily and accurately identify the various sprads, and open up new ways in the research of honey bees. The isolation of the genomial DNS from 5 to 7 day old larvae samples was successfully carried out. In the future the plan is to carry out the measure with microsatellite markers. As an initial step the optimal annealing temperature was identified. In the mitochondrial DNA survey the COI-COII mytochonrial regional primer due to its low anneling temperature cannot be used with any normal sequencing methods. By using these method the aim of this research is the measurement of genetic variance.
-
Experiment of quality properties of dehydrated fruits
7-15Views:100The lyophilization is the joint application of freezing and drying. It is an up-to-date conserving procedure, the point of which is that the humidity existing in the frozen humid material is transferred from the solid state directly into the gaseous state at a temperature below 0 oC under vacuum. Out of the procedures applied nowadays, this is the most tolerant drying process.
With regard to the high investment and operational costs, freeze drying is applied only for valuable, heat-sensitive materials when the technological aim is to preserve such properties as aroma, taste and colour as well as such components as proteins and vitamins. This procedure is suitable for drying and conserving certain foodstuffs, stimulants, organic chemicals, medicines and similar sensitive and valuable materials.
In our institute, we have been conducting freeze drying experiments with regional fruits and vegetables since the year 2005. During the first phase, we examined the heat- and material transfer as well as the abstraction of humidity, while during the second phase we analysed the rehydration ability and nutrient content of the freeze-dried materials as compared to those dried with the method of convection. Moreover we have conducted penetration measurements with a portable hardness tester.
To sum up the results gained so far, we can state that the quality of the lyophilized materials is better than those dried in the traditional way. It originates partly in the fact that the temperature and pressure applied for the freeze drying are smaller and the drying period is far longer than for the convection drying.
In contrast to convection-dried materials, freeze dried materials set in close to their original water-content, keep their original shape and size after being rehydrated. The reason of it the porous, spongy structure (flexible cell wall) of the lyophilized products which is able to take up moisture quickly. In addition, the lyophilized products can be rehydrated faster than those dried in the traditional way.
Regarding the results of the chemical analyses, the following conclusion can be drawn: the vacuum freeze drying results a small decrease of nutrient content and nutritive value for the lyophilized products.
The results of the hardness tests support the statement that the majority of agricultural materials cannot be considered as an ideal flexible body, because during the experiment the flexibility coefficient changed when going from the surface of the material inwards. In addition, the penetration tests also confirm that the surface of the convection-dried vegetables is at least 1.5-3 times harder than that of the freeze-dried products. The reason of it that it takes place during the drying denaturation processes.
The article summarizes the results of our research work listed above, in accordance with our experiments conducted by using the characteristic fruits (apple, plum) of the Nyírség Region. -
Matériel et conditions de reproduction du ver à soie de chêne Antheraea pernyi Guer (Bombycidae)
58-60Views:55In this study we highlighted the conditions that need to be fulfilled in order to have successful oak silkworm reproduction.
Thus, conditions for best cocoon hibernation should be as follows: strata of 10-15 cm with optimal temperature around 0oC, relative humidity of 60-70%. The cocoons must be moved every 10 days and must also be daily aired.
Butterfly mating should take place either the night of their coming out or the second day. It takes 14-15 hours; male butterflies outnumber females by 10%.
After mating, the optimal temperature for laying eggs is 18-20oC; relative humidity is 80%; egg laying takes place in the dark. -
The effect of rising concentration of atmospheric carbone dioxide on crop production
81-84Views:111In the atmosphere, the amount of carbon dioxide and other greenhouse gases are rising in gradually increasing pace since the Industrial Revolution. The rising concentration of atmospheric carbon dioxide (CO2) contributes to global warming, and the changes affect to both the precipitation and the evaporation quantity. Moreover, the concentration of carbon dioxide directly affects the productivity and physiology of plants. The effect of temperature changes on plants is still controversial, although studies have been widely conducted. The C4-type plants react better in this respect than the C3-type plants. However, the C3-type plants respond more richer for the increase of atmospheric carbon dioxide and climate change.
-
The impact of cultivar and irrigation on yield, leaf surface temperature and SPAD readings of chili pepper
103-108Views:182Paprika is an extremely popular and widespread plant species in Hungary. Chili peppers belongs to paprika and it can be consumed fresh or processed. The production of peppers began with the cultivation and control of some parameters for good results of paprika production. The aim of this article is to compare the water supply of four chili pepper hybrids ("Habanero", "Hetényi Parázs", "Unikal" and "Unijol") by means of investigation on open field and to examine how different temperatures and water stress factors influence the yield of chili peppers. The experiment area consisted of four different hybrids in three different irrigation treatments (control, deficit- and regular irrigation). The chlorophyll content was estimated with SPAD and the leaf surface temperature with Raytek MX4 TD. Our research concluded that deficit irrigation produced the highest yields for all cultivars and the lowest yields for the highest water supply.
-
Impact of environmental changes resulting from different sowing dates on maize yield
99-104Views:132Three Debrecen maize hybrids of different genotypes (Debreceni 285, Debreceni 377 and Debreceni 382) were examined on chernozem soil in a field experiment. During the two years of the experiment (2009–2010), we wanted to get to know how the examined hybrids reach to different sowing dates and what impact early, optimal and late sowing has on yield.
In 2009, balanced soil and air temperature resulted in steady emergence. However, the low temperature in early April and the cooling down in mid-May 2010 caused a delayed emergence.
The grain moisture content at harvesting and the high yield showed a strong crop year effect. In 2010, yield was much lower (1.664 t ha-1) and grain moisture was significantly higher (34%)than in 2009.
In 2009, early sowing resulted in yield decrease (P<0.05), but it also significantly reduced grain moisture at harvesting (P<0.05). Although late sowing slightly increased yield (not significantly), but grain moisture at harvesting increased by 9.2%. In 2010, optimal sowing date was shown to be the best alternative from the aspect of yield, but there was no significant difference in comparison with early and late sowing. Grain moisture at harvesting greatly increased (13.3%).
The Debreceni 382 maize hybrid reacted to sowing dates flexibly, neither early, nor late sowing affected its yield significantly and the grain moisture at harvesting showed 12% increase in the case of the late sowing date. In 2009, maize hybrids Debreceni 285 and Debreceni 377 reached their highest yield in the case of the sowing date which was shown to be optimal (23rd April), while the different sowing dates had no effect on yield in 2010.
-
Analysis of the photosynthetic parameters, the yield and the quality of winter wheat
101-106Views:125The environmental adaptability of crop production is basically determined by the selection of biological background (plant species and
varieties) suitable for the region and the site. The aim of our work is to parametrize the plant assimilation, its intensity, dynamics and the
most important characteristics and the relationships to the quality in winter wheat trials. The measurements were carried out at the research
site of the University of Debrecen in small parcel experiments. We measured the leaf net CO2 assimilation rate, stomatal conductance,
intercellular CO2 level, the transpiration, the leaf temperature and the air temperature by the LICOR LI-6400 portable photosynthesis
system in field trials on the nutrient supply. The soil of the experimental area is calciferous chernozem with favorable water regime.
We have examined the photosynthetic activity, the productivity and yield stability of winter wheat varieties. We have compared the yield
results, at similar agrotechnical conditions in seven cropyears. We also determined the quality parameters of the winter wheat varieties.
Then we valued the yield stability of genotypes with the help of analysis of variance and linear regression equations. We have defined the
connections between assimilation parameters, the yield stability and quality parameters of wheat varieties. -
Preliminary results of intraspecific sterlet hybrid (Siberian sterlet × sterlet) rearing under intensive conditions
17-19Views:116Due to early maturation and a small size, sterlet (Acipenserrut-henus) is a very advantageous fish for intensive sturgeon farming with regard to caviar production. According to our previous observations, the growth potential of Siberian sterlet (A.ruthenusmarsiglii) is higher than that of the European one. In our experiment, sterlet and an intraspecific hybrid (Siberian sterlet × sterlet) were tested under intensive tank conditions. During the 8 weeks of the experiment, survival, growth and size heterogeneity were investigated. According to the results, there were no significant differences in survival and growth but the size heterogeneity was higher in the hybrid. It is supposed that, in our trial, the applied water temperature range (24.0–25.5 °C) was optimal for sterlet, but was probably above the optimal range for the hybrid.
-
The significance of biological bases in maize production
61-65Views:159The comparative trial has been set up in the Demonstration Garden of the Institute of Crop Sciences of the University of Debrecen, Centre for Agricultural and Applied Economic Studies, Faculty of Agricultural and Food Sciences and Environmental Management in 2012, with 24 hybrids with different genetic characteristics and growing periods. The soil of the trial is lime-coated chernozem, with a humus layer of 50–70 cm.
The weather of the trial year was quite droughty; the monthly average temperature was 3–4 oC higher than the average of 30 years. High temperature, together with lack of precipitation occurred during the most sensitive phenophases of maize (flowering; fecundation, grain saturation).
The following characteristics have been observed: starting vigour, date of male and female flowering, plant and cob height, dry-down dynamics during maturation and the change of yield composing elements has also been quantified. The yield was recalculated to 14% moisture content grain yield after harvesting.
The beginning of the growing period was advantageous, therefore the analysed hybrids could grow a high (above 300 cm) and strong stem. The yield of the hybrids changed between 10.33 and 11.87 t ha-1, but as a result of the unfavourable climatic extremes, their genetic yield potential prevailed only at a rate of 30–40%. However, moisture content by the time of harvesting was good despite its early date (12th September); it remained under below 14% in most cases. Dry-down was measured on a weekly basis between 14th August and 5th September.
The analysis of the qualitative parameters of the maize hybrids (protein %, oil % and starch %) resulted in significant differences. The most significant difference has been observed in the case of protein content (LSD5%=2.01). Oil content was the most advantageous in the case of hybrids belonging to the mid-late growing group (FAO 400). The X9N655 and 36V74 hybrids had the highest oil content (around 4%), while hybrids P9915 and 37F73 had significantly lower oil content. Starch content was above 70% in the case of every hybrid.
Hybrid selection is highly important in terms of yield and yield security of maize, as well as the application of modern biological fundamentals and hybrid specific technology for the improvement of the level of cultivation technology.
-
Application of mycorrhizae and rhizobacteria inoculations in the cultivation of processing tomato under water shortage
111-118Views:44The effect of mycorrhizal fungi and plant growth promoting rhizobacteria on some physiological properties, yield and soluble solid content (Brix) of ‘Uno Rosso’ F1 processing tomato was studied under water scarcity. Inoculation was performed with mycorrhizal fungi (M) and rhizobacteria preparation (PH) at sowing (M1, PH1) and sowing + planting (M2, PH2). The treated and untreated plants were grown with regular irrigation (RI = ET100%), with deficit irrigation (DI = ET50%) and without irrigation (I0). In drought, the canopy temperature of plants inoculated with arbuscular mycorrhizal fungi (M1, M2) decreased significantly, however, the decrease was small in those treated with the bacterium (PH1, PH2), while the SPAD value of the leaves of plants treated only with Phylazonit increased significantly. On two occasions, inoculations (M2, PH2) significantly increased the total yield and marketable yield, however, under water deficiency, a higher rate of green yield was detected than untreated plants. In dry year using deficit irrigation, the one-time inoculation (M1, PH1) provided a more favorable Brix value, while the double treatments reduced the Brix. In moderate water scarcity, the use of mycorrhizal inoculation (M2) is preferable, while under weak water stress, the use of rhizobacteria inoculation (PH2) is more favorable.
-
The effect of climatic change on the rheological properties of winter wheat doughs
96-100Views:77In present paper we have examined the effect of climatic change on the extensigraph characteristics of wheat-flours. The baking quality
of winter wheat is largely determined by cultivar, but it can be influenced by weather conditions during growing period. Flours were from 5
cultivars grown at one location in three cropping years. We have found that the extensigraph properties of dough are affected by the weather
conditions, nevertheless, different cultivars distinctly react to the increase of temperature and decrease of precipitation. In generally, the
higher average day temperature and lower precipitation level is favourable to produce winter wheat flour with better quality -
Examinations of soil waterbalance in different crop-rotation systems of maize
41-49Views:73We examined the change of the time of water balance of soil in 25 years old experiment, on chernozem soil, in different croprotation systems (mono-, bi- and triculture) in dry (2007) and rainy (2008) cropyear in maizestock. According to our findings the values of waterdeficit of soil of maizestock were much smaller in 2008 than values of last year in not irrigated and irrigated plots of three of crop-rotation systems because of favourable supply of precipitation. We found difference between values of waterdeficit of two irrigation treatments. We measured smaller values in irrigated plots of three of crop-rotation systems before sowing. Waterstock of soil started to decrease with the rising of average temperature and despite of increasing of precipitation quantity in this way we calculated higher values of waterdeficit. Precipitation in August and high average temperature intensified the waterdeficit. Waterdeficit achieved highest values of croptime to front of September. We examined waterbalance of soilprofile in 0-200 cm and we concluded that the waterdeficit of the 80-120 cm soilzone was most intensiv in not irrigated and irrigated treatments because of significant rootmass.
-
Effect of weather conditions on the protein content and baking value of winter wheat flour
83-94Views:110We searched for connections between weather conditions (with its sub-parameters as precipitation and average temperature) and the yearly formation of two quality parameters (protein content and baking value) on three levels of mineral fertilization, based on the results of a variety comparison experiment on chernozem soil, to select those weather parameters and critical periods which have significant effects on the quality of winter wheat flour.
We established that the protein content of winter wheat flour can be increased with increasing levels of mineral fertilizers. Protein content is lower and has higher deviation during non-fertilized conditions in different cropping years than on higher fertilization levels. Thus, it seems proved again that quality (as protein content) is mainly formed by the crop year, but can be improved with adequate agricultural engineering (with mineral fertilization in the present case). The higher sum of precipitation in May, and the lower average temperature after flowering, have the highest increasing effect on the protein content of flour of the examined parameters. Based on the results of the examined period, the rainier and warmer term than average before flowering and lower – average amount of precipitation and colder circumstances are favourable for higher baking values. The analysis with data of decades, proves the importance of the first half of May and the middle of June as especially important periods for quality formation. An increasing nutrient supply has different effects on the varieties; mineral fertilization increased the baking value of GK Öthalom winter wheat variety in almost every case, but the second level of fertilization decreased it in half of the examined years. Additionally, mineral fertilization played a role in the stabilization of the quality of highlighted varieties. -
The Influence of Cropyear on the Yield and Yield Safety of Different Sunflower Hybrids
68-73Views:98The effectiveness of plant production is basically influenced by the ecological, biological and agricultural technical factors. There are many kinds of sunflower hybrids which differres in their adaptability. If we want to increase the efficiency of sunflower production, we have to design different technologies for each hybrid. In the last decade, the range of sunflower hybrids increased exceedingly. This is the reason why we have to do experiments with them and examine what the relationship among genotypes, the environment and the hybrids is.
We made our experiments at the Látóképi Experimental Station of the University of Debrecen. We had 57 hybrids in 2001, and 44 in 2002 and 2003. We used only just those hybrids which were planted in every year.
In 2001 the months at summer were hot and the distribution of rainfall was extreme. In the beginning of the year 2002, the summer was also hot. During the abscessing period, the temperature was under the 30 years average and the rainless period was typical. In 2003, the temperature was extrame and the rainfall during the growing season was dry. The yield average which was determined after the three years in the very early group averaged 3998,9 kg/ha. The best hybrids were the LG 5385 (4273,3 kg/ha) and the Magóg (4134,4 kg/ha). The early group’s average was 4129,4 kg/ha. The best hybrid was the Astor in the early group. The middle group’s average was 4169 kg/ha and the Zoltán had a better yield than average (4238 kg/ha). In the confectionary group the Iregi szürke csíkos (3579,9 kg/ha) reached the best yield and it is above the average to it’s group (3225 kg/ha).
To estimate the results, we used factor analysis. Its results allow us to say that rainfall first and second part of June has a negative influence on yield. Aswith to the yield, yield safety is also important to know, which shows the adaptability of the hybrid.
After examining the CV% in the three years we can say that the most stable hybrids were in the very early group Samanta (10,94 CV%) and the LG 5385 (12 CV%) In the early group, the most reliable hybrids were Altesse RM (6,9 CV%) and the Astor (10,8 CV%) and the end in the middle group the Lympil (10 CV%) and in the confectionary group the Birdy (9,8 CV%) and IS 8004 (12 CV%) were the best.
After examining yield and yield safety, our conclusions are that in the Hajdúsági löszhát, the very early group LG 5385, early group Altesse RM, middle group Lympil and the parandial group IS 8004 hybrid had the highest yield and the best yield stability. -
Impact of tillage systems on maize emergence
129-136Views:29In Europe, there has been a significant change in the way tillage is approached in recent years. This change is due to a growing awareness among farmers, politicians and society as a whole that soil is not a renewable resource in itself. From an agricultural point of view, the greatest impact on soil condition can be achieved through the use of the applied tillage systems. My research takes this approach as a basis when examining the different tillage systems and their impact on the environment. In this context, conventional and a variety of no-tillage systems are examined in this paper. As a next step, it is examined how the environmental conditions created by the different tillage systems influence the emergence of maize hybrids. The analyses are carried out in a multi-factorial, long-term tillage field experiment. The same batch of the same hybrid seed was sown in several crop years, and the effects of environmental conditions on the emergence process were examined. Environmental effects and emergence-related uptake were measured in the examined plots. Measurements of environmental effects included air temperature, precipitation, soil temperature measured at seeding depth, as well as % cover of stem residue on the surface in the treated plots. The first emergence time measurements of the sown crop in the plots of each treatment were compared and relationships between these factors were investigated.
-
Applicability of reflectance to determine compost maturity
31-35Views:104The utilisation of composts depends on their maturity and stability. A great part of the determination methods can be set in laboratory and needs complicated sample preparation. The aim of this paper was introduce an effective and fast method which based on the different reflectance of the different organic compounds.
During our research we examined the degradation process of compost prisms based on sewage sludge, wood-clipping and straw with temperature and reflectance measurements.
As a result, we came to the conclusion that the reflectance, measured at 645 nm or higher, is applicable to determine compost maturity if it is used with temperature measurements. -
Observation of some parameters on adult millet (Panicum miliaceum L.) individuals by pre-post herbicides controlling mostly grass type annual weeds
93-96Views:58The experiment was conducted in warmer mean daily temperature than the many years average, and almost in the same precipitation conditition as the many years average. The herbicides employed were sprayed in the 3-4 leaf stages developing phase of the millet (Panicum miliaceum L.) population by the dose of officially proposed. On the basic of the results, the herbicides didn’t effect deleteriously, in most instances, on the cultur plants in sort and long periodus at all. Tendenciously the values of parameters observed were sligtly better after the Stomp 330EC than the Dual Gold 960EC. ( The values of the parameters are significantly better at the treated variants than the control ones, are in realation with the wheather and development stile of the millet, beside the different weeding status of the plots.)
-
The impact of environmental factors on the measurement of the normalized difference vegetation index
141-147Views:118The level of nitrogen supply of a plant population can be quickly measured with non-destructive optical measurement devices and the differentiated determination of nitrogen shortage and the replenishment of nitrogen can also be carried out. The level of nitrogen supply is based on the fact that the chlorophyll content of crops is in close correlation with nitrogen content and that the amount of chlorophyll can be easily measured on the basis of the light absorption of chlorophyll molecules. The successfulness of optical measurements can be influenced by the change of weather parameters; therefore, it is important to know the correlations between measurement results and weather parameters when it comes to practical use.
The GreenSeeker Model 505 measurement device determines the relative chlorophyll content in the form of the Normalized Difference
Vegetation Index (NDVI) calculated on the basis of the intensity of the reflected red and infrared rays of light from the crop population. The measurements were performed in alfalfa population with 10 replications at five measurement heights and four measurement times. The weather parameters were measured by a weather station located in the middle of the alfalfa population and the correlations between the meteorological data and the NDVI values were examined. During the statistical evaluation of the results, it was established that the NDVI measurement is primarily influenced by the relative humidity of the air, secondly by air temperature and thirdly by wind speed. Relative humidity was in strong correlation with the NDVI values which were also influenced by the measurement height and time. Regression was not significant in the case of 20 cm measurement height, but the measurements above 40 cm height showed significant correlations. The correlation was shown to be strong at each measurement time, but the influence of humidity was the lowest at 11:00 and 14:00.