Search

Published After
Published Before

Search Results

  • Agronomic bases of precision barley production
    217-220
    Views:
    90

    To ascertain the importance of individual preciosion factors in achieving yield and quality of malting barley, we established a multifactor 
    experiment at the research station of the Slovak University of Agriculture in Nitra in 2009 and 2010. Four variants of fertilization, 2 ways of soil cultivation and four varieties 'Bojos’, 'Kangoo’, 'Marthe’ and 'Xanadu’ were observed. From the quality indicators the nitrogen content (%) was observed. The results were statistically analyzed by using a multifactor analysis of variance by using Statistica 8, the program Statgraphics. The difference between years was statistically significant (1.87 t ha-1) in favour of 2010. The difference was also significant between the varieties 'Bojos’ and ’Kangoo’(1.07 t ha-1), respectively. 'Martha’ and 'Xanadu’ as well as 'Kangoo’ (0.56 resp. 0.33 t ha-1). Conventional soil cultivation in
    comparison with a minimalization technology, demonstrated a  tatistically insignificant increase of yield. Significant differences were obtained between the variants of fertilization. Treatment by using Condit (b-var.) showed a very positive impact in climatic favorable year (2010) with a yield result of 7.42 t ha-1. In comparison with an untreated control, the difference in yield was 0.89 t ha-1. A significant increase of yield was achieved by using the combination of solid fertilizer with foliar fertilizer (LAV + Hakofyt, var.c) 0.47 t ha-1. The crude protein content was statistically influenced by a variety and year. In 2009, the crude protein content was above average (12.38%). Significantly lower attributes were achieved in 2010 (9.90%). From the studied/observed varieties the lowest crude protein content was showed by a variety 'Kangoo’ (1.68%).

  • Effects of combined nutrient supply treatments on some physiological parameters of autumn wheat
    241-251
    Views:
    137

    The Fleischmann Rudolf Research Institute in Kompolt is not only famous for plant breeding but the institute also surveys the effects of different nutrient supply methods since 1918. In 2017, we joined this research supported by EFOP 3.6.1 project. Our aim was to investigate photochemical processes – which is one of the most determinant in case of yield – of crops by in vivo field measurements. We measured the chlorophyll content of leaves using Minolta SPAD 502. We used miniPAM fluorometer to determine actual photochemical efficiency and non-photochemical quenching of PSII during natural light conditions and also to evaluate the pigment (chlorophylls and carotenoids) and water content of leaves we applied field spectrophotometer (ASD FieldSpecPro 3). We utilized these methods by various treatments (1. treatment with soil bacteria + head and base fertilizer; 2. treated by only head fertilizer; 3. treated by only base-fertilizer) in field experiment of autumn wheat (4.1–2.43–1.19 ha) in June, 2017. The difference between treatments was clearly detectable. In the case of the first treatment, physiological processes were more intense and the ripening occurred earlier. The obtained yield was the highest in the case of the area treated by soil bacterial. Based on the results, the first treatment can be recommended in practice.

  • Examination and statistical evaluation of physico-chemical parameters of windrow composting
    33-38
    Views:
    189

     

    The treatment and utilization of plant and animal waste and by-products from agriculture is very diverse. Traditional environmental management practices for waste management have been retained through soil conservation and the applied of recycle degradable organic substances in soil. The management of by-products from agriculture (animal husbandry) is important because a closed loop can be created to utilize by-products (manure, feathers) from the production of the main product (eggs, meat, milk) and to form a raw material for a new product. It is important to treat the resulting by-products, especially deep-litter manure, as it has served as a basis for compost-treated manure to develop an organic-based, soil-conditioning product line. Poultry manure by itself is not suitable as a substrate for aerobic decomposition, so it has to be mixed with other substances (zeolite, bentonite, soil), because of its high nutrient capacity, it is an acidifying substance.

    The aim of this study was to compost the mixture of poultry manure and hen manure by the addition of zeolite and to monitor the composting process. It was also our aim to statistically determine the effect of the zeolite on parameters describing the composting process.

    The windrow composting experiments were set up in the composting area of the University of Debrecen, Institute of Water and Environmental Management. The composting experiment was 62 days long, during which the main parameters describing the composting process were continuously monitored: temperature (°C), moisture content (w/w%), electrical conductivity (mS/cm), organic matter content (w/w%), examination of nitrogen forms (w/w%). In this study, three factors were investigated: temperature, humidity, and pH. For statistical evaluation, R software and RStudio user interface were used. We developed a repeated measurement model, in which the fixed and random effects were determined for our parameters under study, and the resulting relationships were shown on interaction plots.

    Based on our results, the temperature of the prisms has become independent of the ambient temperature and the composting stages can be separated in both the control and the zeolite treated prisms. In the repeated measurement model, we proved that treatment, time and treatment: time interaction were significant at both temperature and pH.

  • Economic questions of maize production on different soil types
    289-292
    Views:
    103

    The requirements and objective of cultivation are in constant change. For example, different cultivation systems are developed for the purpose of soil protection, the preservation of its moisture content and on soils with various precipitation supply or production site conditions. Traditionally, one of the most important cultivation aims is crop needs. Further cost saving in fertilisation and crop protection can only be achieved by reducing the quality and quantity of production or it cannot be achieved at all. Furthermore, the costs can be significantly reduced by means of the rationalisation of cultivation. Energy and working time demand can also be notably reduced if ploughing is left out from the conventional tillage method. The key requirement of economicalness is to perform the cultivation at the optimal date, moisture level and the lowest possible cost.
    Within production costs, the cost of cultivation is between 3–17%, while they are between 8–36% within machinery costs. It is the vital condition the usability of each technological method to progressively reduce costs. Our evaluation work was carried out with the consideration of the yield data obtained from cooperating farms and the experiment database of the Institute for Land Utilisation, Regional Development and Technology of the Centre for Agricultural and Applied Economic Sciences of the University of Debrecen. Three technological methods (ploughing, heavy cultivator and loosening tillage) were used on several soil types which differ from in terms of cultivability (chernozem, sandy and sandy clay soils) from the economic/economical aspect. We examined the sectoral cost/income relation of maize production as an indicator plant. The maize price during the analytical period was 45 thousand HUF per t. On chernozem soils, the production of maize can be carried out on high income level, while maize production on sandy soils has a huge risk factor. The role of cultivation is the highest on high plasicity soils, since they have a huge energy
    demand and the there is a short amount of time available for each procedure in most cases.

  • The Effect of Forecrop and Plant Protection on the Pathology Parameters and Yields of Winter Wheat
    84-89
    Views:
    88

    We carried out our experiment in the cropyears of 2000/2001, 2001/2002 and 2002/2003, on calcareous chernozem soil, at the experimental site of the Debrecen University Farm and Regional Research Institute, at Látókép. We examined the disease resistance and the yield quantity of Mv Magvas variety by adopting different forecrops and plant protection technologies, at 30+30 N level and at normal cereal row spacing. We applied two forecrops (wheat and pea) and two plant protection technologies (extensive and intensive). We measured the rate of infection by population survey in the first ten days of June.
    In the course of our examinations, we found, that the rate of powdery mildew infection was higher in the thicker population sown after pea forecrop in all three years, as powdery mildew is not a typical cereal disease.
    The infection rate of leaf mildew and DTR (Dreschlera tritici-repentis) was higher after wheat forecrop in all examined years, because these are typical wheat diseases and infection centres in the soil promote the spreading of these diseases. However, it was possible to parry the adverse effect of forecrops by intensive plant protection.
    Due to the chernozem soil, wich has good water management features, and due to the good preparation of the seedbed, the effect of forecrops on yield quantity did not appear in the examined years. The quantity of the yield was only slightly larger after pea forecrop in the cropyears of 2000/2001 and 2002/2003 than after wheat. Nonetheless, the data of technical literatures state that the yield quantity can be larger, even by 15-20%, after pea forecrop.
    In the course of intensive plant protection technology, we applied systemic pesticides, while in the course of environmentally sound technology, we used contact pesticides of sulphur content. In those populations that were treated with environmentally sound plant protection technology, infection rate was higher in all three years.
    Yield quantities were somewhat lower in the course of applying extensive, environmentally sound technology, because diseases appeared in these populations to the higher degree. Powdery mildew does not, but leaf mildew and Dreschlera tritici-repentis have a significant yield decreasing effect. With appropriate, well-selected fungicides, we were able to keep every leaf diseases well in hand, and the rate of infection was almost independent of the influence of the breeding year.

  • The response of sunflower hybrids to different plant densities on a chernozem soil
    123-128
    Views:
    147

    In our experiment the reaction of six sunflower hybrids of different genotypes (NK Oktava, ES Biba, ES Diagora, ES Ballistic, EGH 8925, PR 64 H 42) towards plant density has been investigated by different fungicide treatments in the crop-year of 2011 on a chernozem soil. 
    In the crop-year of 2011 sunflower populations were infected by a significant Diaporthe helianthi disease. The extent of this infection was significantly enhanced by the increment of plant density. However, regarding the average of the hybrids and plant densities the two times executed fungicide treatment has decreased the infection rate by 22%. The most susceptible hybrid was the ES Biba. Contrarily, the hybrid ECH8925 proved to be the most resistant hybrid towards this
    disease according to our results. According to the results of the Pearson’s correlation analysis it has been revealed that stalk breakage and Diaporthe infection stand in a very close (r=0.782**) and middle close (r=0.523**) correlation resp. with plant density. The relationship between fungucude treatments and stalk breakage, just as Diaporthe infection showed to be middle and close respectively. Our results demonstrate the role of stalk and plate diseases (among them Diaporthe) in causing stalk breakage, for we have found a close positive correlation between stalk breakage and Diaporthe infection (r=0.624**) in our analysis.
    From the aspect of yield amount the optimal plant density varied between 45 000 and 55 000 plants per hectare. Fungucude treatments enabled not only the use of higher plants densities, but they had a yield increasing effect as well. In the crop-year of 2011 the highest yield (4 559 kg ha-1) on a chernozem soil has been measured in case of the hybrid ECH8925.

  • Az NPK-trágyázás hatása a kukorica tápelemfelvételének dinamikájára, öntözött és nem öntözött viszonyok között
    23-27
    Views:
    155

    The effect of NPK-fertilization on the dynamics of nutrient uptake of maize (Zea mays L., cv. Clarica) was examined on chernozem soil under irrigated and non-irrigated conditions in a field experiment.
    The following results were made:
    • the element concentrations in the plant decreased over time,
    • there is no difference between the dynamics of nutrients on irrigated and non-irrigated sites because rainfall was satisfactory for plants in vegetation period,
    • the N doses not only significantly increase the nitrogen content in maize, but also have a noticable effect on Ca and Mg concentrations,
    • because of the acidifying effect of N-fertilizers, increasing the amount of N-fertilizer increased the Mn, Zn, Cu content of the plants,
    • the P doses have a significant effect on the maize P and N content and the Zn concentration of the plant via P-Zn antagonism in the soil,
    • as the high K doses treatments alter the ion ratios in the soil, the Ca, Mg content of the plant decreased.

  • Effect of different production types on the yield and ß-carotene content of sweet potato /cultivar Ásotthalmi- 12/
    45-49
    Views:
    126

    Production of sweet potato is extending in Hungary, despite the fact that there is no field-specific production technology. Therefore, many growers cannot utilize potential yields and quality. The goal of this study was to determine the optimal production method of the Ásotthalmi 12, a Hungarian sweet potato cultivar which can adapt to the Hungarian climate. The effect of single and twin rows production on the yield of this cultivar was examined. The planting was carried out on June 24th, the harvesting on October 20th and the growing-season was 120 days long. Uniform nutrient supply was applied to the whole field experiment. During basic fertilization, 206 kg Knd 20 kg N, 36 kg P ha-1 were used on the soil. While forming the ridges, we used an additional 25 kg N, 45 kg P and 62.5 kg K ha-1. We adopted drip tape irrigation on the experimental field. After the planting, from the 8th week of the vegetation, another 21 kg ha-1 K, 10 kg ha-1 MgSO4, and 2 kg ha-1 Ca(NO3)2 was added in one dosage weekly, until the 13th week of vegetation. At the evaluation of the experiment, we examined the yield regarding the whole experimental plot. SPAD and fluorescence measurements were carried out on 08.16. 2019, 08.28.2019, and on 09.13.2019, during the watering break. To demonstrate the difference between the dates, we applied ANOVA and Tukey post-hoc tests. For the measurement of phytonutrients HPLC, a liquid chromatograph was used, where the carotenoid content of the Ásotthalmi 12 cultivar was determined in connection with the different production methods. Test results showed that twin rows production leads to a nearly 30% greater yield, than single row production. We determined, that the growth of yield correlates negatively to the ß-carotene content of the Ásotthalmi 12 cultivar sweet potato.

  • Effects of the cropyear and the agronomical factors on agronomical elements of different sweet corn (Zea Mays L. convar. saccharata Koern.) genotypes in long-term experiment
    105-110
    Views:
    97

    In the crop season of 2010 (rainy year), we studied the effect of three agrotechnical factors (sowing time, fertilization, plant density) and four different genotypes on the agronomical characteristics of sweet corn on chernozem soil in the Hajdúság. The experiments were carried out at the Látókép Experimental Farm of the University of Debrecen. In the experiment, two sowing dates (27 April, 26 May), six fertilization levels (control, N30+PK, N60+PK, N90+PK, N120+PK, N150+PK) and four genotypes (Jumbo, Enterprise, Prelude, Box-R) were used at two plant densities (45 thousand plants ha-1, 65 thousand plants ha-1). The amount of precipitation in the season of 2010 was 184 mm higher, while the average temperature was 0.8 oC higher in the studied months than the average of 30 years. Weather was more favourable for sweet maize at the first sowing date, if we consider the yields, however, if we evaluate the agronomical data and yield elements (number of cobs, cob length and diameter, the number of kernel rows, the number of kernels per row) it can be stated that the size of the fertile cobs was greater at the second sowing date due to the lower number of cobs. The largest number of fertile cobs was harvested in the case of the hybrid Enterprise (72367.9 ha-1) in the higher plant density treatment (65 thousand ha-1) at the fertilization level of N120+PK when the first sowing date was applied. The largest cobs were harvested from the hybrid Box-R (cob weight with husks: 516.7 g, number of kernels in one row: 45.7) at the lower plant density (45 thousand plants ha-1) in the second sowing date treatment. Cob diameter and the number of kernel rows were the highest for the hybrid Prelude.

  • Effect of NPK fertilization on the yield and yield stability of different maize genotypes
    101-104
    Views:
    118

    The yielding capacity and quality parameters of 11 maize hybrids were studied in 2011 on calcareous chernozem soil in a 25-year long-term fertilization experiment in the control (without fertilization), in the base treatment of N 40 kg ha-1, P2O5 25 kg ha-1, K2O 30 kg ha-1 and in five treatments which were the multiplied doses of the base treatment. The N fertilizer was applied in the autumn and in the spring, while P and K fertilizers were applied in the autumn.The sowing time was 17–18 April, the time of harvest was 8 October. The 30-year average of precipitation (April–Sept) was 345.1 mm, the amount of precipitation did not differ greatly from that, however, its distribution was very unfavourable.
    It was found that the largest yield increment (as compared to the control) was in the treatment N 40 kg ha-1, P2O5 25 kg ha-1, K2O 30 kg ha-1 in the long-term experiment. The largest yields were obtained for the hybrids P9494, PR37N01 and PR35F38 (13.64–13.71 t ha-1). Due to the dry period at the end of the summer – beginning of autumn, the grain moisture content at harvest was favourably low, 12–18% depending on the treatment and the growing season.

    The N fertilization significantly increased the protein content of the kernel, but the starch content of the kernel decreased (significantly in several cases) with increasing fertilizer doses and yields as compared with the control.
    The highest protein content was measured in hybrids GK Boglár and Szegedi 386. The oil content was above 4% for GK Boglár, but the two hybrids were not among the best yielding hybrids in spite of their good inner content. The starch content was around 75 % without fertilization, it decreased with fertilization.
    For the tested hybrids, the fertilizer dose N 120 kg ha-1, P2O5 75 kg ha-1, K2O 90 kg ha-1 can be recommended with respect to efficacy and environmental considerations.

  • Evaluation of dry matter accumulation of maize (Zea mays L.) hybrids
    35-41
    Views:
    336

    The increase of the grain yield of maize is closely correlated with its seasonal dry matter accumulation. Dry matter is accumulated into the grain yield during the grain filling period. The following maize hybrids were involved in the experiment: Armagnac FAO 490, Loupiac FAO 380 and Sushi FAO 340. In order to determine dry matter content, two samples per week were taken on the following days: 22nd, 25th, 28th, 31st August, 4th, 7th, 14th, 18th, 22nd, 25th, 29th September and 2nd, 6th, 9th, 13th October. In the course of sampling the weight of 100 grains from the middle section of 4 ears was measured in 4 replications. Dry matter content was determined after drying to constant weight in a drying cabinet at 60 °C. Harvesting was performed on 13th October 2017.

    The daily precipitation sum was determined by local measurements, while the daily radiation and temperature data were provided by the Meteorological Observatory Debrecen of the National Meteorological Service in Budapest. Among the agrometeorological parameters, an analysis was made of the precipitation during the growing season, effective heat sums during the vegetative and generative phase, and the water supplies. The daily heat sums were determined using the algorithm proposed.

    The amount of precipitation in the winter period before the 2017 growing season was 210 mm. The soil was saturated until its field capacity. The rather dry and warm March and April had a favourable effect, but there was no worthy amount of precipitation until May (51 mm) due to the condition of the dried seedbed. Sowing was performed on the 5th of May 2017 in a randomised small plot experiment. There was favourable precipitation and temperature during the growing season, thereby providing ideal conditions for maize development, growth and yield formation. There was near average amount of precipitation in each year. The total amount of precipitation in the summer period is 342 mm. Temperature was mostly above the average, but there was no long and extremely warm period.

    The Armagnac hybrid reached its highest dry matter mass 126 days after emergence. Physiological maturity was reached sooner (on the 119th day) in the case of Loupiac, and even sooner in the case of Sushi (116th day). The thousand grain weight of Sushi (which has the shortest ripening period) was 286 g at the time of physiological maturity, while that of Loupiac was 311 g. Compared to Sushi, Armagnac showed 12 g more dry matter accumulation (306 g). In the case of all three examined hybrids, physiological maturity was preceded by an intensive phase, when the dynamics of dry matter accumulation was rather quick. On average, Sushi gained 2.8 g dry matter per day between 103 days following emergence and physiological maturity, while the same values were 3.2 g for Armagnac and 3.3 g for Loupiac. The aim of the regression line slope is to predict the behavior of the dependent variable with the knowledge of the values and characteristics of the independent variables using the regression line equation. Furthermore, to determine how the location affected the dynamic of dry matter accumulation in the Armagnac, Loupiac and Sushi hybrids. In regression analysis, the coefficient of explanation showed that the effect of day in the Armagnac was 97%, in the Loupiac 94%, in the Sushi 90 %. The determination coefficient (R2) is useful in determing how the regression equation fits. But, as we have seen, the determination coefficient alone is not sufficient to verify the model’s accuracy, in addition to the determination coefficient (R2), the normality of the data or the residuals, the variance of the variables at different levels, the independence of the data relative to time and non-oblique. Observations are evaluated for the correctness of the fitted model.

    Dry matter values decreased evenly and slightly following physiological maturity. According to our research results, it was established that physiological maturity is followed by a moderate dry matter loss. Until harvesting, Armagnac lost 40 g of its thousand mass weight in 29 days, while the same value pairs were 69 g in 36 days for Loupiac and 29 g in 39 days for Sushi. Loupiac – which had the highest weight at the time of physiological maturity – lost the most of its dry weight; therefore, Armagnac and Sushi had higher values at the time of harvesting.

  • Examination of plant number and sowing date in different crop years
    79-82
    Views:
    99

    We examinated three agrotechnical factors in 2011, 2012 and 2013 (sowing time, nutrient factor and plant density), as well as five different effects of genotypes on the crop of corn, on brown soil in the Hajdúság. The experiment was set next to the 47 main road in Debrecen, at the 6th kilometre stone.

    In the present processing I would like to touch on the effects of sowing time and plant density, as I do not have the chance to present the whole experiment results here. It is true for all three years that the humidity factors differ from the long years’ average, so the genotypes had different reactions on it. According to our results we found out that the late sowing time’s result had the most successful crop yield result with 9975 kg ha-1, while examining the plant density the result of the highest plant density proved to be the best with 9967 kg ha-1.

    We take the critical season in corns’ life cycle process into consideration when examining the results: June, July and August months’ humidity and temperature markers. According to the results in the tested 3 months we had 227 mm humidity with 10 days, when the average temperature was over 25 °C. The same factors in 2012 were 135.5 mm humidity with 37 days of average temperatures of 25 °C and in 2013 we recorded 102.5 mm humidity with 24 of these days.

    Our goal is to help the farmers in the Hajdúság with the results of our sowing times, hybrid choice and plant density results.

  • The effect of compost made of sheep manure on the first cut of a semi-natural grassland
    25-29
    Views:
    187

    In an experiment, two types of compost were tested on natural grassland in order to improve the productivity of a natural sward on solonetz soil. Both composts were made of on-farm produced sheep manure, but the second one was enriched in phosphorus. These fertilizers/composts are officially authorized and can be applied in organic farming. Zero application and three rates of fertilizer were tested (10 t ha-1, 20 t ha-1, 30 t ha-1) on 30 m2 experimental plots wit four replications. Dry matter, crude protein and net energy content for maintenance were measured and determined and their yields per unit area were calculated. We found that all the treated plots produced significantly higher yield than the control ones, and in some cases the yields were almost three times higher. However, the optimal compost dose varied, depending on the examined parameter. Based on the evaluation of the experiment results along with rainfall data, it was concluded that, with higher precipitation, the positive effect of the compost application was bigger. The difference between the natural and enriched compost is remarkable, but it has to be mentioned that even the natural compost showed good results; therefore, it is also effective in improving the fertility of grassland.

  • Agronomic research in Martonvásár, aimed at promoting the efficiency of field crop production
    89-93
    Views:
    115

    The effect of crop production factors on the grain yield was analysed on the basis of three-factorial experiments laid out in a split-split-plot design. In the case of maize the studies were made as part of a long-term experiment set up in 1980 on chernozem soil with forest residues, well supplied with N and very well with PK. The effects of five N levels in the main plots and four sowing dates in the subplots were compared in terms of the performance of four medium early hybrids (FAO 200). In the technological adaptation experiments carried out with durum wheat, the N supplies were moderate (2010) or good (2011), while the P and K supplies were good or very good in both years. Six N top-dressing treatments were applied in the main plots and five plant protection treatments in the subplots to test the responses of three varieties. 
    The results were evaluated using analysis of variance, while correlations between the variables were detected using regression analysis.
    The effect of the tested factors on the grain yield was significant in the three-factorial maize experiment despite the annual fluctuations, reflected in extremely variable environmental means. During the given period the effect of N fertilisation surpassed that of the sowing date and the genotype. Regression analysis on the N responses for various sowing dates showed that maize sown in the middle 10 days of April gave the highest yield, but the N rates required to achieve maximum values declined as sowing was delayed. 
    In the very wet year, the yield of durum wheat was influenced to the greatest extent by the plant protection treatments, while N supplies and the choice of variety were of approximately the same importance.  In the favourable year the yielding ability was determined by topdressing and the importance of plant protection dropped to half,  while no  significant difference could be detected between the tested varieties. According to the results of regression analysis, the positive effect of plant protection could not be substituted by an increase in the N rate in either year. The achievement of higher yields was only possible by a joint intensification of plant protection and N fertilisation. Nevertheless, the use of more efficient chemicals led to a slightly, though not significantly, higher yield, with a lower N requirement. 

  • Development opportunities for storing and displaying of spatial data in long-term experiments
    81-86
    Views:
    113

    Long-term experiments are required to evaluate the impact of irrigation, nutrient utilization, and year factor as well as to assess the potential consequences of climate change. However, in the long-term experiment, it may be necessary to display spatial data for each parcel, either for investigation of soil heterogeneity or presentation. This article aims to provide help for researchers working in long-term experiments for storing and displaying spatial data.

    After the outlines of each experimental site were measured with GPS, a spatial database has been created in Quantum GIS. Then, a filter script in R statistical environment using RStudio graphical interface was written. The script helps avoid the QGIS data input interface so that large data can be attached to each parcel directly and as a result there is no need for a separate data entry, only the basic statistical database.

    The created GIS database can be used in many ways; it can be exported to KML file format that can be displayed using Google Earth. It is possible to view exported KML files in Google Drive with importing them to Google My Maps application, and with that a browser can display the map. With the Google Drive the maps can be shared within the research group, additionally the outlines can be edited and it is possible to upload the measurement data to the attributes table to existing empty table columns. The map created in Quantum GIS can be used for presentation purposes.

  • Effect of different N doses on maize yield and quality
    97-101
    Views:
    144

     The effect of N doses on the yield and nutritional values of the Sushi (FAO 340) maize hybrid were analysed in three years (2018, 2019, and 2020). The analyses were performed at the Látókép Experimental Station of the University of Debrecen on calcareous chernozem soil, in a striped, small-plot, non-irrigated long-term field experiment. In the experiment, in addition to the non-fertilized treatment (A0), the N-fertilizer doses were applied as basic fertilizer and top dressing. The 60 and 120 kg N ha-1 dose (A60, A120) applied as spring basic fertilizer were followed by two phases of top-dressing in V6 (V690, V6120) and V12 (V12150, V12180) phenophases; the amounts were +30 and +30 kg N ha-1.

    Maize yields were affected to varying degrees by crop year. The highest yields in 2018 and 2020 were recorded in the same V6150 treatment, while in 2019 the highest yield was obtained in the A120 treatment.

    Increasing the N doses resulted in an increase in the protein content of the maize kernel. Depending on the fertilizer treatments and the crop year effect, the protein content of maize kernels varied between 6.2–10.2 g x 100 g-1. In all three years, the protein content was the lowest in the control treatment (A0) and the highest in the V6150 treatment.

    The starch content ranged from 70.7 to 77.9 g x 100 g-1 in the average of the three years. In 2020, it was significantly higher in all nutrient treatments than in the other examined two years. The highest starch content - except for 2020 (A120, 77.9 g x 100 g-1) - was recorded in the A0 treatment (74.2, 72.3 g x 100 g-1).

    The oil content of maize kernels varied between the values of 3.8 and 5.2 g x 100 g-1 in the average of three years. In terms of oil content, the results for 2018 and 2019 can be considered the same, while in 2020 it was significantly lower. Fertilizer treatments did not significantly affect the oil content of maize in any of the years.

    The fertilizer dose applied in the V12 phenological phase was not effective in terms of yield and nutritional content (protein, starch and oil content).

  • The effect of the plant density for the yield of the maize hybrids
    50-61
    Views:
    87

    In order to enchance the yield stability of maize, the effect of plant density on yields was studied on a typical meadow soil in Hajdúböszörmény between 2002-2004. In the plant density experiment, we used the method of Béla Győrffy. The plant densities applied therefore 20 to 100 thousand plants/ha by ten thousand scale. The application of fertilizer rates for the maize hibrids in every year were N: 110 P: 90 K: 120 kg/ha. We used a manual soiling-gun in the experiment. In every year we used plant protection techniques against monocotyledonous and dicotyledonous weeds. The harvest was done by hand. The facts were read by variancie analysis and linear regression analysis. The moisture and the temperatures were extreme in 2002, 2003, 2004. We have to mention defficiery of moisture in 2003 which is shown that the hot days number increased. After evaluating our findings we can conclude that most hybrids showed a significant correlation between increased plant density and the volume of yields. On the basis of the experiments we divided the hybrids into four groups: the first group included the hybrids suitable for increased plant density with a wide range of optimal density values; the second group included hybrids, which did not require high plant density, were capable of good individual performance and tended to grow several ears; the third group included flexible corn types, which grew longer ears in favourable years, thus yielded more; and the fourth group included the hybrids, which were sensitive to increased plant density and which showed a narrow range of optimal density values. Finally, plant density determines the yield; we have to consider optimal plant density intervals as well as optimal plant density, and we also have to place a high emphasis on the use of hybrid-specific technologies.

  • Evaluate the nutritional reaction at winter wheat after different forecrops
    77-80
    Views:
    126

    Our field researches took place on the Látókép test farm of Agricultural Science Centre of University of Debrecen, Centre for Agricultural and Applied Economic Sciences, in long-term experiment, on calcareous chernozem soil, in growing season of 2014/2015. In our experiment we examined the fertilizer reaction and the yield of different winter wheat genotypes (GK Öthalom, GK Csillag, Mv Csárdás, Mv Toldi) with grain maize and sweetcorn forecrops. According to our results, the sweetcorn forecrop strongly affected the yield. In the average of the fertilizer treatments and the varieties, after sweetcorn forecrop 6.9 t ha-1, after grain maize forecrop 5.4 t ha-1 average yield was gained. According to our data, the fertilizer reactions of the varieties were significantly different.

  • Correlation between the weather in 2017 and the productivity of maize
    89-93
    Views:
    152
    In our research we examined the effect of the hybrid, the nutrient supply, the number of plants and the abiotic factors (temperature, amount of precipitation) on the yield, crop quality and yield stability of maize. We devoted special attention to the natural nutrient utilization ability and fertilizer reaction of maize. The experiment took place in Hajdúszoboszló on chernozem soil, on a nearly 8 ha field. The size of one plot was 206 m2; therefore, this experiment was half-industrial. We tested six hybrids with different genetic characteristics and growing seasons. I analysed the correlation between the nutrient supply and the yield of maize hybrids with control treatment (treatment without fertilization) and with N 80, P2O5 60, K2O 70 kg ha-1 and N 160, P2O5 120, K2O 140 kg ha-1 fertilizer treatments. The yield increasing effect of the fertilizer also depended on the number of plants per hectare to a great extent. The number of plants of the six tested hybrids was 60, 70, and 80 thousand plants ha-1.
    In Hajdúszoboszló in 2017, up to October, 445.8 mm of rain fell, which is in line with the average values of 30 years, and is only 45.7 mm less than those. In 2017, the effect of increasing the plant number was slighter. Averaged over the observed fertilizer treatments and hybrids, the yield was 9.10 t ha-1 with 60 thousand plants ha-1, 9.11 t ha-1 with 70 thousand plants ha-1 and 9.12 t ha-1 with 80 thousand plants ha-1. Without fertilization, in most cases, increasing the plant number from 60 thousand plants ha-1 to 70-80 thousand plants ha-1 does not increased the yield but decreased it. With N80+PK treatment the yield changed between 8.90 and 11.27 t ha-1. The effect of increasing the plant number was just slightly observable and did not show a clear tendency. The effect of changing the plant number, even with the highest dosage of fertilizers, could not be detected adequately. In contrast with the plant number, the effect of the different fertilizer treatments was expressly traceable. Compared to the control treatment (treatment without fertilization), with N80+PK fertilizer dosage with 60 thousand plants ha-1 the yield increased by 3.36–4.99 t ha-1. The smallest demonstrable proof, i.e. the LSD5% was 0.22 t ha-1, which means that fertilization, in each case, significantly increased the yield. When analysing the effect of fertilization in the average of the hybrids and the different plant numbers, a yield of 5.61 t ha-1 could be detected, which value was 10.12 t ha-1 with N80+PK treatment and 11.61 t ha-1 with N160+PK treatment. Thus, it can be calculated that compared to the treatment without fertilization, the N80+PK treatment increased the yield by 4.51 t ha-1, while compared to the N80+PK treatment, the N160+PK treatment increased the yield by 1.49 t ha-1. In addition to agrotechnical factors, in maize production, the impact of the crop year is specifically of high importance.
    The average yield of hybrids (in the average of the different fertilizer treatments) was 6.81 t ha-1 in 2015, 11.86 t ha-1 in 2016 and 9.11 t ha-1 in 2017. When comparing the yield results against the precipitation data, it is clearly visible that the amount of rain fell in the January– October period is directly proportional to the average yield of maize. The effect of the crop year can be defined in a 5.05 t ha-1 difference in the yield.
  • Impact of fertilisation and the fluctuation of precipitation on the ecophysical and production characteristics of maize
    39-44
    Views:
    148

    The aim of this study was to analyse the problems caused by the unfavourable (dry and wet) weather and its consequences in the R1 growth stage of maize (Zeamays L.), as well as their management and the alternatives of preventing yield reduction by using agrotechnical measures fertilisation, irrigation), also, we wanted to examine whether the Chl content measured in the R1 growth phase provides reliable prediction of yield per hectare.

    The examinations were carried out in a moderately warm and dry production area at the Látókép Experiment Site of the University of Debrecen, Centre for Agricultural Sciences on calcareous chernozem soil in 2007 and 2008. Six different N doses (0,30,60,90,120,150 kg ha-1) were used in the irrigated and non-irrigated treatments of the field experiment.

    The results showed that there is a significant strong positive correlation between Chl content and yield both in the non-irrigated (P<0.001, R=0.777) and the irrigated (P<0.001, R=0.801) treatment. The results of the correlation analyses performed yearly showed that weather factors significantly influence the strength of correlations, but these correlations are always positive.

    The Chl content of maize leaves provided a reliable prediction of yield per hectare in the R1 growth stage. In the irrigated treatment, the correlation is always closer than in the non-irrigated treatment.

  • Development of maize production technology that increase the efficiency of bioethanol production
    17-26
    Views:
    82

    Maize is one of the most important crops worldwide and also in Hungary, it can be utilized for multiple purposes: as a feedingstuff, for human nutrition and for industrial processing. In the last decades, the per ha yield of maize varied greatly in Hungary, between 2004 and 2006, it was 6.82-7.56 t/ha, while in 2007, it was only 3.6 t/ha. Resulting from this, the price of maize became 2-2.5 times higher. The high price hinders bioethanol production. The largest per ton amount of bioethanol, 387 l, can be produced from maize.
    In addition to its classical utilization as feed and food, the industrial use (especially for bioethanol production) of maize is increasin.
    For industrial production, a new production technology is needed. I tested and selected hybrids appropriate for this purpose and set up fertilization and plant density experiments. The experiment were set up on chernozem soil in 2007.
    The applied fertilization treatment was N 120, P2O5 80 uniformly, and five different dosages of potassium: K2O 0, K2O 100 (KCl), K2O 100 (Kornkáli), K2O 200 (KCl), K2O 200 (Kornkáli) kg/ha active ingredient. The applied plant densities were 40, 50, 60, 70, 80, 90 thousand plants/ha.
    The yield of maize hybrids in the fertilization experiment ranged between 10.53 – 14.62 t/ha. Both regarding the form and dosage, 100 kg/ha Kornkáli proved to be the best potassium treatment. Regarding the inner content parameters, the highest starch content in the average of treatments was obtained for the hybrid PR36K67: 73.57%, and its yield was also the highest, so this hybrid proved to be the most suitable for bioethanol production. The highest protein content was observed for the hybrids KWS 353 (12.13%), which can be favourable for feeding purposes.
    Most of the hybrids gave the highest yield at 80 thousand plants/ha plant density, however, hybrids PR36K67 and Mv Tarján achieved the highest yield at 90 thousand plants/ha.
    In bioethanol production, the selection of a high-yielding hybrid with high starch content, a slight reduction of N, increase of potassium, the application of the highest plant densities of the optimum interval, harvest at full maturity (when starch content is the highest compared to protein content) are of great importance. 

  • The effect of and interaction between the biological bases and the agrotechnical factors on maize yield
    83-87
    Views:
    144
    The effect of and interaction between the biological bases and the agrotechnical factors on maize yield In our research, we examined the effect of the hybrid, the nutrient supply, the number of plants and the abiotic factors (temperature, amount of precipitation) on the yield, crop quality and yield stability of maize. We devoted special attention to the natural nutrient utilization ability and fertilizer reaction of maize. The experiment took place in Hajdúszoboszló on chernozem soil, on a nearly 8 ha field. The size of one plot was 206 m2; therefore, this experiment was half-industrial. We tested six hybrids with different genetic characteristics and growing seasons.
    We analysed the correlation between the nutrient supply and the yield of maize hybrids with a control treatment (treatment without fertilization) and with N 80, P2O5 60, K2O 70 kg ha-1 and N 160, P2O5 120, K2O 140 kg ha-1 fertilizer treatments. The yield increasing effect of the fertilizer also depended on the number of plants per hectare to a great extent. The number of plants of the six tested hybrids was 60, 70, and 80 thousand plants ha-1.
    In 2015, the highest yield was produced by hybrid P9241 with N80+PK and 70 thousand plants per hectare. With the N160+PK fertilizer dosage, the same hybrid responded the best, followed by hybrids P9486 and DKC4717. Using the same fertilizer treatment, the 80 thousand plants per hectare population density resulted in decrease in the yield with most of the examined hybrids. In 2016, with the increase in the number of plants per hectare, even with non-fertilised treatment (control treatment), the yield could be increased in the case of each hybrid.
    Averaged over the different hybrids and fertilizer treatments, applying 80 thousand plants ha-1 instead of 60 thousand resulted in 1.0 ha-1 yield increase. In 2017, the number of plants had a slighter effect. With N160+PK treatment, in most cases no significant difference can be observed. The value of LSD5%: plant number: 0.20 t ha-1, hybrid: 0.28 t ha-1, interaction: 0.48 t ha-1. With N160+PK treatment, the hybrids produced yields between 10.07 and 12.45 t ha-1. When examining the three years in the average of the number of plants, with treatment without fertilisation, the average yield of hybrids reached 7.53 t ha-1. With N80+PK treatment, this value was 9.71 t ha-1 and with doubling the fertilizer dosage, this value increased to 10.42 t ha-1. No economic profit was gained as a result of applying double dosage of fertilizer; therefore, the N80+PK dosage can be considered ideal.
  • Technological development of sustainable maize production
    83-88
    Views:
    144

    In our research we examined the effect of the hybrid, the nutrient supply, the number of plants and the abiotic factors (temperature, amount of precipitation) on the yield, crop quality and yield stability of maize. We devoted special attention to the natural nutrient utilization ability and fertilizer reaction of maize.
    The experiment took place in Hajdúszoboszló on chernozem soil, on a nearly eight ha field. The size of one plot was 206 m2, this it was a half-industrial experiment. We tested six hybrids with different genetic characteristics and growing seasons. I analysed the correlation between the nutrient supply and the yield of maize hybrids with control treatment (treatment without fertilization) and with N 80, P2O5 60, K2O 70 kg ha-1 and N 160, P2O5 120, K2O 140 kg ha-1 fertilizer treatments. Yield increasing effect of the fertilizer also depended on the number of plants per hectare at a great extent. The number of plants of the six tested hybrids was 60, 70, and 80 thousand plants per ha.
    In Hajdúszoboszló, in 2016 the amount of rainfall from January to October was 605 mm, which was more than the average of 30 years by 160 mm. The yield of hybrids without fertilization changed between 9.63–11.6 t ha-1 depending on the number of plants.
    The six tested hybrids is 10.65 t ha-1 in the average of the stand density of 60, 70 and 80 thousand plants per hectare without fertilization, while it is 12.24 t ha-1 with N80+PK fertilizer treatment. That increase in the yield is 1.6 t ha-1, it is significant.
    Da Sonka hybrid is sensitive to weather, it is able to produce 6 t ha-1 additional yield in case of favourable condition. However, it has a low stress tolerance. The most stable yields were observed at Kamaria and Pioneer hybrids. The effect of vintage is also an important factor on the yield. In average, the yield of maize was 6.81 t ha-1 in 2015, which was a drought year and 11.86 t ha-1 in 2016 that was a favourable year.

  • The effect of apoplastic pH on the nutrient uptake
    65-71
    Views:
    94

    The pH of soil and rhizosphare –around the roots- determine the mobility and solubility of nutrients. The exudates organic acids of plant able to modify the pH, as well as the microorganisms also take part in mobilization of nutrients. The nutrient solve mostly in mildly acidic and neutral pH. The either assumption of utilization of nutrients is the uptake by roots and of course uptake to the cells to take part in metabolism. The pH of apoplast fluid determines the solubility and uptake of nutrients to the cells.
    The aim of this study was to examine the effect of nutrient solution and apoplastic pH together with a bacteria based biofertiliser (Phylazonit MC®) on nutrient uptake and pH of apoplast fluid in case of nutrient solution grown plants in laboratory experiment. According to my results, the bicarbonate increased the pH of nutrient solution in due to influence the solubility and uptake of nutrients. The given bicarbonate to the nutrient solution and infiltrated into the apoplazma also modified the pH of the apoplast fluid of the test plants. The effect of bicarbonate and biofertilizer were different on the pH of the apoplast fluid and nutrient solution in nutrient solution experiment. 

  • Effect of the plant density on different maize (Zea mays L.) hybrids yields and leaf area index (LAI) values
    51-56
    Views:
    145

    We have investigated the plant number reactions of three maize hybrids of various genotypes in a small-plot field experiment. The plant numbers were 50, 70 and 90 thousand ha-1, while the row distances were 45 and 76 cm. The experiment was set on the Látókép Experimental Farm of Centre for Agricultural Sciences of the University of Debrecen in four replications on calcareous chernozem soil.

    The assimilation area and the leaf area index have important role in development of the crop yield. The studied three different genotype maize hybrids reached its maximum leaf area index at flowering. The maximum leaf area index increased linearly with increasing plant density. The season-hybrids reached less yield and leaf area index. According to our experimental results, we have concluded that with the decrease of the row spacing, the yield increased in the average of the hybrids. The studied hybrids reached the maximum yield at 70 and 90 plants ha-1 plant density. We determined the optimal plant number that is the most favourable for the certain hybrid under the given conditions.The higher plant density was favourable at 45 cm row spacing than 76 cm. The hybrids reached the maximum grain yield at 45 cm row spacing between 76 712–84 938 plants ha-1, while the optimum plant density at 76 cm row spacing changed between 61 875–65 876 plants ha-1.

    The leaf area index values between the applied plant density for the flowering period (July 1, 24), we defined a significant differences. In the archived yields were significant differences at the 45 cm row spacing between 50 and 70, 90 thousand ha-1 plant density, while the number for the 76 cm row spacing used did not cause a significant differences in the yield. There were significant differences between the examined hybrids of yields.