Search

Published After
Published Before

Search Results

  • Examination of the effect of pelleted poultry manure products on a sunflower test plant in a laboratory model experiment
    83-88
    Views:
    164

    Sunflower (Helianthus annuus L.) is one of the most important oil plants in Hungary, with a sown area of more than 627.000 ha in 2019. Sunflower cultivation is primarily important for use in the oil industry, but its role in feed and beekeeping cannot be neglected either. Sunflower adapts well to different production areas in terms of soil demand, yet, as important fact, it must be grown on soils with poorer conditions with intensive nutrient replenishment. From the agri-environmental point of view, in addition to the use of pelleted poultry manure products, which are also new to the consumer market, is of paramount importance. Their advantages include a wide range of nutrients as well as a soil structure improving effect.

    In our research, we investigated the starter effect of pelleted poultry manure products applied at different doses (200 kg ha-1 and 400 kg ha-1) on sandy soil with humus using a sunflower plant. The aim of our research to investigate the effect of using pelleted fertilizer products as starter fertilizers on sunflower plant germination, and investigate the effect of poultry manure products on soils.

    Based on our results, it can be stated that the pigment content (chlorophyll and carotenoid content) was positively influenced by the higher dose treatments (400 kg ha-1), thus increasing the photosynthetically active leaf area. Compared to the control, the carotenoid content in the test plants of the treatments increased, and the differences of this treatment proved to be significant (p<0.05). Our experiments supported the beneficial effect of pelleted poultry manure-based products in the soil-plant system.

  • Fertilisation Effect on Quantity of 0.01 M CaCl2 Soluble N-Forms in a Long-Term-Small-Plot Experiment
    166-170
    Views:
    45

    long-term experiments have an opportunity to investigate the effects of fertilization and plant nutrition. The paper reports the results achieved in the 39th years of a long-term-small-plot fertilisation and liming experiment set up on acidic sandy brown forest soil in the Nyírség region. From the 32 treatment, four replications, altogether 128 plot experiments with 10 treatments are summarized. We took samples after harvest of triticale, in August.
    We used a reliable method (segmented continuous flow analysis) to determine different (easily mobilized - 0.01 M CaCl2 soluble) N-forms of soil. The 0.01 M CaCl2 soluble inorganic and total N content and the UV digestable organic-N form of soil were determined by this method.
    The results are summarized below:
    – The mineralized-N (Nmin.) content of soil increased with dose of nitrogen treatment. Liming treatments increase the amount of Nmin.
    – The maximum content of easily mobilize organic-N-fraction was found in the upper (0-20 cm) layer. This fact due to the large amount of crop and roots.
    – Changing of content of 0.01 M CaCl2 soluble total-N-forms due to N doses.
    – The ratios of these N forms are variable. It is very important that the content of organic N fraction is not negligible and this fraction plays a main role in the plant nutrition.

  • Assessing of soil aggregate stability: the sand-correction and its relevance
    29-47
    Views:
    99

    Soil structure and changes in its quality caused by Maize stem (1), Wheat straw (2) and Maize stem & wheat straw (3) addition were assessed by three aggregate-stability indices. We observed that the NSI index formula proposed by Six et al. (2000) was nonsensitive to the changes in soil structure caused by the investigated organic matter addition. Furthermore it overestimates the aggregate-stability of the investigated silty sandy loam soil. Therefore we proposed a new modified NSI formula which is sensitive to the questionable treatments and that resulted in a more
    realistic NSI data. The most sensitive index to differences of the investigated treatments were the Mean weight diameter (MWD) proposed by van Bavel (1953, in Kemper és Rosneau, 1986).

  • Evaluation of KCl-EDTA-, CaCl2- DTPA-, CaCl2-DTPA-TEA extractants for estimating available Cu in soils
    5-9
    Views:
    104

    KCl-EDTA-, CaCl2-DTPA-, CaCl2-DTPA-TEA extraction
    methods were compared to determine the plant available Cu
    amounts in the soil samples. In the soil extracts, the amounts of
    copper were measurable. In the buffered CaCl2-DTPA-TEA
    extracts, data showed the lowest values.
    On the applied soils, a correlation was observed between
    plant removal and soil Cu using extractants mentioned above. The
    closest correlation appeared in the case of sandy soils.
    From the results of statistical analysis, it appears that soil
    properties may play role in the efficiency of the extraction using
    either CaCl2-DTPA or KCl-EDTA solutions.
    To establish more reliable relations, further studies with
    different types of soils are needed.

  • The Impact of Water Supply on the Quality and Health of Potato
    144-147
    Views:
    102

    Besides its effect on potato yield, water also has a significant impact on yield quality. Excess water (too much precipitation, over-irrigation) and the lack of water (lack of precipitation or irrigation) both trigger stress in the plant and can significantly worsen the quality of the yield (seed potato) and deteriorate the health of the plant and the seed potato. Excess precipitaton or irrigation water leaches nitrate-nitrogen under the rhizosphere, consequently, the amount of available nitrogen decreases leading to the deficiency of N in potato. If water cover (the maximally saturated state of soil) exceeds 8-12 hours, it can cause root destruction (because of the lack of oxygen), which leads to the wilting and later to the death of the plant. Abundance of water caused by excess precipitation or irrigation is a major problem primarily on sandy loam, loam and clay loam soils with bad structure and water management qualities, but also on any soils, which are over-irrigated or irrigated at an improper time. Symptoms of the lack of water are detectable mostly when the available water content of the soil (disponible water) decreases under 60-65%.
    In the present year, there was a lack of precipitation on the Great Plain, which can be compensated by proper irrigation. Unfortunately, this problem is further intensified by the high temperature, which results in faster ripening and accompanied with fluctuating soil moisture content, in the formation of secondary tubers.

  • Examination of Zn deficiency on some physiological parameters in case of maize and cucumber seedlings
    5-9
    Views:
    82

    Zinc (Zn) is an essential micronutrient needed not only for people, but also crops. Almost half of the world’s cereal crops are deficient in
    Zn, leading to poor crop yields. In fact, one-third (33%) of the world's population is at risk of Zn deficiency in rates, ranging from 4% to
    73% depending on the given country. Zn deficiency in agricultural soils is also a major global problem affecting both crop yield and quality.
    The Zn contents of soils in Hungary are medium or rather small. Generally, the rate of Zn deficiency is higher on sand, sandy loam or soil
    types of large organic matter contents. High pH and calcium carbonate contents are the main reasons for the low availability of Zn for
    plants (Karimian and Moafpouryan, 1999). It has been reported that the high-concentration application of phosphate fertilisers reduces Zn
    availability (Khosgoftarmanesh et al., 2006). Areas with Zn deficiency are particularly extensive in Békés, Fejér and Tolna County in
    Hungary, yet these areas feature topsoils of high organic matter contents. Usually, Zn is absorbed strongly in the upper part the soil, and it
    has been observed that the uptakeable Zn contents of soil are lower than 1.4 mg kg-1.
    Maize is one of the most important crops in Hungary, grown in the largest areas, and belongs to the most sensitive cultures to Zn
    deficiency. Zn deficiency can causes serious damage in yield (as large as 80 %), especially in case of maize. On the other hand, Zn
    deficiency can also cause serious reduction in the yields of dicots. One of the most important vegetables of canning industry is cucumber,
    which is grown all over the world.
    In this study, the effects of Zn deficiency have investigated on the growth of shoots and roots, relative and absolute chlorophyll contents,
    fresh and dry matter accumulation, total root and shoot lengths, the leaf number and leaf area of test plants in laboratory. Experimental
    plants used have been maize (Zea mays L. cv. Reseda sc.) and cucumber (Cucumis sativus L. cv. Delicatess). A monocot and dicot plant have
    chosen a to investigate the effects of Zn deficiency, because they have different nutrient uptake mechanism.
    It has been observed that the unfavourable effects of Zn deficiency have caused damage in some physiological parameters, and
    significantly reduced the growth, chlorophyll contents of monocots and dicots alike.

  • Influence of mammal fossorial activity on bearing-out some chemical elements on up of soil cover
    117-120
    Views:
    81

    Fossorial activity of mammals is conductive to trace of microelements from more deep soil horizons into zone of its active involving to biological cycle. As a result of researches have established the mostly intensive migration of micro- and macroelements that is goes at the expense of mammals fossorial activity it is typical for humid gully lime-and-ash with oak wood. A middle position in speed of entering chemical elements is belonging to artificial oak wood in the watershed and humid lime-and-ash with oak wood in floodplain. Mostly slow migration in speed of entering elements is typical for middle-dry pine wood on sandy terrace.

  • Effect of cropping technologies on the yield of dry bean variety ’Diana’
    37-41
    Views:
    120

    An experiment on three dry bean varieties (Start, Hópehely, Diana), using different sowing-times, fertilizers and plant densities was performed on sandy soil in the University of Debrecen, Centre for Agricultural Sciences, Research Institute of Nyíregyháza in 2015. The aim of the experiment was to study which treatment gives the highest yield, and whether the different treatments result in significant differences in the yields. In this paper the dry bean yield at ‘Diana’ variety is analyzed.

    The treatments were done with three fertilizer doses and three plant densities at different sowing-times (April 24; May 8; May 18). As a result of the high temperature and the drought during the growth season, the yields we harvested were in low, which shows the ecological sensitivity of the plant we examined.

    We concluded that the poorest yield was harvested at the third sowing-time. There was no significant difference in the yields at the first and second sowing- time. Examining all the three fertilizer treatments we applied at the experiment, we achieved the highest yields in the control plots. It might be due to the weak efficiency of nitrogen fertilizer under the extremely dry conditions. The highest yield was harvested at the control treatments during the second sowing-time. Regarding the effect of the plant densities, the highest crop yield was achieved at the treatment using 400 000 germs ha-1, followed by 300 000 germs ha-1 and 200 000 germs ha-1.

  • Supplementary botanical examinations for modelling the grass production of the great pasture of Hajdúbagos
    17-21
    Views:
    59

    Our botanical survey at the great pasture of Hajdúbagos is a part of a broad research that aims to predict the production of the grass at the given area. As the mentioned pasture is a nature conservation area, the usage of artificial fertilizers or other classic grassland management methods in its handling are prohibited. Thus grazing is an important tool for the management of this area, however the not suitably regulated grazing order and the poorly calculated carrying capacity cause serious problems at some parts of the pasture. The prediction of the grass yield is essential to
    avoid both over- and both under-grazing and for determining the optimal number of the grazing animal stock and the grazing method, thus the most suitable management strategy.
    The potential grass yield is easily calculable with a computer model that will be established as a basis for determining the grass production. For the sake of getting an accurate view of the plant associations of the pasture, we created examination quadrates and determined all plant species found in the quadrates. After plant determination, we compiled a coenological table in which we marked besides the scientific name and families, the life forms of each species that refer to the structure, morphology and thus the adaptability of plants to their environment. We determined the
    TWR, so the thermoclimate, water and soil reaction values, the nature conservation values, as well as the covering values of each plant species (DB), and the total coverage of the examination quadrates (B%).
    According to the covering values, grasses proved to be characteristic plants at the examined pasture, thus we need to consider them influential in calculating the animal carrying capacity and with the rest of the information, we need to supply the model.
    The life forms and TWR indicators, all together with the nature conservation values provide further important data to the development of the management suggestion of the protected pasture. By examining these values to different parts of the area, we could get an exact view on the measure of the degradation effects. This promotes the determination of grazing methods and the forming of the boundaries of certain pasture sections, to avoid  those harmful anthropogenic effects that seriously endanger this extensive sandy pasture. 

  • Evaluation of the Green bean variety candidate BU-16
    75-81
    Views:
    72

    This study presents the results of the variety comparison trials conducted with the French bean variety candidate BU-16 on sandy soil, during two years at the Research Center of the University of Debrecen.
    The outstanding characteristics of this variety candidate are the early maturity, the showy pods (yellow, straight, cylindrical cross-section „pencil bean”) and the high yield potential.
    The experiments were conducted with a randomized design, with five varieties and four replications. The varieties (of which two are foreign and three are domestic) were as follows: BU-16 fj, Maxidor, Paridor, Hungold and Budai piaci. The individual plots were 2 m wide and 4 m long. The seeds were sown at a density of 30 germs per m2, with a row spacing of 50 cm.
    The following parameters were taken: time of flowering, time of green maturity, plant height, height of the lowest pod above ground level, number of pods per plant, distribution of the pods by the state of development (20 plants), usable pod length (1 kg of standard crop-yield), yield per hectare based on the number of plants per plot. The experiments were evaluated statistically with Excel and SPSS softwares.
    Results obtained with the variety candidate BU-16:
    – The time from the emergence to green maturity is 45 to 46 days, which is short as compared with the other cultivars studied.
    – Plant height is 38cm (two years average), which is among the highest ones, together with Paridor.
    – The pods are set high above the ground level similarly to Paridor, the height of the lowest pod is 19 cm.
    – The average number of pods per plant is 13 (two years average) similarly to Paridor and to Maxidor.
    – The distribution of pod size in 2007 is as follows: 68% of the pods of BU-16 is of the standars size, which is a good rate. The value of this trait for the other varieties is 60 to 63%, except for Paridor, the value of which is similar to that of BU-16.
    – The usable pod length (10 to 14 cm) is 63% in 2007 and 84% in 2006. Similar pod length rates were obtained for Maxidor, while the rate for Paridor is as high as 91%.
    – The total yield and the standard yield of BU-16 is among the highest ones.
    According to the results obtained and presented above, the variety candidate BU-16 is the earliest maturing among the varieties tested with high yield potential which, however, is not significantly different from that of the others. Significant differences can only be detected in plant height and the number of pods per plant. Considering the results, BU-16 is to be further tested.

  • The effect of wet compost extract on the root tubers of green pea
    51-54
    Views:
    133

    Nitrogen plays significant role in the life of plants, it could be the main limiting factor of plant growth. Sustainable plant nutrition pays attention to satisfy the plants’ nutrient demand without chemical fertilizers, e.g. by bounding the atmospheric nitrogen. The nitrogen fixing organizations play important role in supplying plants with nitrogenbecause the N2-fixingbacteria can fix high amounts of nitrogen.
    Many effects of the sewage sludge compost extracts is known in the literature. We studied the effect of sewage sludge compost water extract in laboratory conditions on the growth of Rhizobium spp. isolated from green pea, while in a small plot experiment thepea-Rhizobium symbiosis were studied on sandy soil in the Nyírség region. The extract was produced under aerobic conditions. The compost extract was applied before and/or after sowing. In the laboratory experiments we used the sterile version of extract, in different doses.
    In our work we present the effect of compost water extract on the number of green pea roots nodules, dry weight of the plant and reproduction of the Rhizobium bacteria.

  • The effect of plant density on the yield of sweet potato
    125-128
    Views:
    344

    A field study was conducted in South-East Hungary during the main cropping season of 2016, 2017 and 2018, with the objective of determining the effect of plant spacing on the productivity of sweet potato. Production technology experiments of four repetitions were set up in a randomized block design on sandy soil. The performed treatments consisted of four variations of plant spacing (row distance x plant-to-plant distance): 80 cm x 20 cm, 80 cm x 30 cm, 100 cm x 20 cm, 100 cm x 30 cm. The plant material was the Hungarian registered sweet potato variety ‘Ásotthalmi-12’. Analysis of variance revealed that planting density significantly affected the average yield of storage roots. The highest yield per plant was achieved with the 100 cm x 30 cm (2016, 2017), as well as with the 80 cm x 30 cm (2018) setups. On hectare level, our results showed that the highest plant density of 62,500 plants ha-1 (80 cm x 20 cm setup) could give the highest yield. Comparing the highest tons ha-1 results to those achieved with the plant spacing setups resulting in the highest yield per plant, the differences can be even 13 or 14 tons at hectare level. This finding underlines the importance of choosing the proper planting density towards the higher end.

  • Micropropagation of Leuce-poplar clones and its role in selection breeding
    43-48
    Views:
    147
    Leuce-poplars (mostly white poplar and its natural hybrid grey poplar) are native tree species trough Hungary. They are covering more than 4.0 per cent of the Hungarian forested area (77 000 ha). The white (grey) poplars play a significant role in the forestation under sandy soil site conditions as well as they are of importance from nature conservation point of view as well.
    Long-term selection breeding work is going on at the National Agricultural Research and Innovation Centre Forest Research Institute (NARIC FRI), involving selection of fast-growing Leuce-poplar clones under dry site conditions.
    Micropropagation technology is relatively quickly spreading in forestry. In vitro multiplication of trees is applied mainly in fruit growing in Hungary, in case of forestry it is used mainly for selection breeding.
    This paper presents a short overview on the micropropagation trials with different Leuce-poplar clones and the early evaluation of the seedlings growing of the micropropagated clones/varieties.