Search

Published After
Published Before

Search Results

  • Cohesion and competitiveness of the European Union at strategic level
    29-33
    Views:
    98

    After the relaunchment of the Lisbon strategy, the cohesion policy of the EU concentrates even stronger on the establishment of the knowledge based economy, on R&D activities and innovations. In the first chapter I demonstrate the funds division of the convergence and regional competitiveness targets in the financial perspective between 2007–2013. The first sheet shows unambiguously that the new member states from Middle-Eastern Europe and the Mediterranean countries spend their funds on convergence and cohesion issues. The situation is contrary in the highly developed Western-European countries, in the core regions, where decisive part of the funds are spent on competitiveness issues. In the second chapter of the study I present the Europe 2020 strategy of the EU, that is a crucial paradigm change in the European strategy-making. While the Lisbon strategy focused on the social cohesion of the European Union, the Europe 2020 strategy strives the fostering of the European competitiveness. In the third part of the study I make a comparison how the funds-allocation altered during the two financial perspectives.

  • Study of factors controlling the amount of 0.01 M CaCl2 extractable Norg fraction
    437-449
    Views:
    181
    The use of new methods describing the “readily available” nutrient content of the soil is spreading on a global scale. The 0.01 M CaCl2 extractant is a dilute salt solution in which the easily soluble inorganic (nitrate-N and ammonium-N) and organic N fractions, P, K and micronutrients are also measurable. The 0.01 M CaCl2 has been tested in the University of Debrecen, Institute of Agricultural Chemistry and Soil Sciences since the 90’s. The results of the researches related to organic N fraction, performed in the last decades, and the results of the present study (originating from the long-term experiment of Karcag, 2007–2009) can be concluded as follows:
    The measurement of easily soluble and oxidizable organic nitrogen (Norg), besides inorganic fractions, could improve the nutrient management.
    The amount of the Norg fraction is determined by the soil conditions, therefore it is considered to be a site-specific parameter.
    Management practices and cropyear affect the amount of Norg as well. The present research confirmed that, the effect of fertilization on the amount of Norg can be explained by the changing of the yield (related to total biomass production), while the effect of cropyear is related to the differences in mineralization circumstances and yield as well.
    The measurement of the Norg fraction is increases the accuracy of N-supply, therefore it could prevent the environmentally harmful excess N application as well.
  • Development opportunities for storing and displaying of spatial data in long-term experiments
    81-86
    Views:
    113

    Long-term experiments are required to evaluate the impact of irrigation, nutrient utilization, and year factor as well as to assess the potential consequences of climate change. However, in the long-term experiment, it may be necessary to display spatial data for each parcel, either for investigation of soil heterogeneity or presentation. This article aims to provide help for researchers working in long-term experiments for storing and displaying spatial data.

    After the outlines of each experimental site were measured with GPS, a spatial database has been created in Quantum GIS. Then, a filter script in R statistical environment using RStudio graphical interface was written. The script helps avoid the QGIS data input interface so that large data can be attached to each parcel directly and as a result there is no need for a separate data entry, only the basic statistical database.

    The created GIS database can be used in many ways; it can be exported to KML file format that can be displayed using Google Earth. It is possible to view exported KML files in Google Drive with importing them to Google My Maps application, and with that a browser can display the map. With the Google Drive the maps can be shared within the research group, additionally the outlines can be edited and it is possible to upload the measurement data to the attributes table to existing empty table columns. The map created in Quantum GIS can be used for presentation purposes.

  • Technological development of sustainable maize production
    83-88
    Views:
    144

    In our research we examined the effect of the hybrid, the nutrient supply, the number of plants and the abiotic factors (temperature, amount of precipitation) on the yield, crop quality and yield stability of maize. We devoted special attention to the natural nutrient utilization ability and fertilizer reaction of maize.
    The experiment took place in Hajdúszoboszló on chernozem soil, on a nearly eight ha field. The size of one plot was 206 m2, this it was a half-industrial experiment. We tested six hybrids with different genetic characteristics and growing seasons. I analysed the correlation between the nutrient supply and the yield of maize hybrids with control treatment (treatment without fertilization) and with N 80, P2O5 60, K2O 70 kg ha-1 and N 160, P2O5 120, K2O 140 kg ha-1 fertilizer treatments. Yield increasing effect of the fertilizer also depended on the number of plants per hectare at a great extent. The number of plants of the six tested hybrids was 60, 70, and 80 thousand plants per ha.
    In Hajdúszoboszló, in 2016 the amount of rainfall from January to October was 605 mm, which was more than the average of 30 years by 160 mm. The yield of hybrids without fertilization changed between 9.63–11.6 t ha-1 depending on the number of plants.
    The six tested hybrids is 10.65 t ha-1 in the average of the stand density of 60, 70 and 80 thousand plants per hectare without fertilization, while it is 12.24 t ha-1 with N80+PK fertilizer treatment. That increase in the yield is 1.6 t ha-1, it is significant.
    Da Sonka hybrid is sensitive to weather, it is able to produce 6 t ha-1 additional yield in case of favourable condition. However, it has a low stress tolerance. The most stable yields were observed at Kamaria and Pioneer hybrids. The effect of vintage is also an important factor on the yield. In average, the yield of maize was 6.81 t ha-1 in 2015, which was a drought year and 11.86 t ha-1 in 2016 that was a favourable year.

  • Assessment of energy generated by biogas production in the educational industrial unit of the University of Szeged, Faculty of Agriculture, with special regard to biomass originating from agriculture and the food industry
    137-140
    Views:
    78

    The importance of waste treatment is increasing. Environmental aims are the main driving force. Stricter regulations for landfills lead to the development of alternative treatment methods for waste. For agro-mechanical research, wastes from animal rearing and the food industry, secondary-tertiary biomass, is of deep concern. Available technology is versatile and relatively simple to use as a reliable and effective means of producing a gaseous fuel from various organic waste. The most common application has been the digestion of animal dung, agricultural, and food-industrial waste. This was studied by our department in our pilot farm of our Faculty. The 50-dairy cow, family sized model farm was built in the summer of 1991, as a result of a Dutch – Hungarian cooperation, on the property of the Faculty. The new pig farm, with 30 sows, and the new goat farm, with 100 nannies, was given to the Faculty on 25 April 2001. On the basis of livestock data, the annual dung production and the producible energy were determinate. The energy was calculated by biogas production coefficients in literature.

  • Hungary’s correspondence with the EU regulations regarding liquid bio fuels
    119-128
    Views:
    71

    During the recent years researchers from different countries have found that our environment is at risk. It has been recognised by the leaders of the member countries and they have made decisions together concerning environmental protection in several agreements, contracts. Unfortunately, these decisions have been weakened and adumbrated on numerous occasions by certain interests.
    However, the energetic exploitation of the biomass has been supported by the economic and social changes of the previous years, more specifically, that of the bio fuels. The significant increase in the price of the traditional energy sources, the import dependency of the countries, the foreseeable exhaustion of the resources, the changes occurred due to joining the EU are all such problems that facilitates the application of bio fuels, as a good solution.
    Our country decided to modify the then existed bio fuel component rate of 2% to 5.75% which has to be achieved by 2010. Since then, in March 2007 it has been expanded to 10% until 2020 (concerning energy content). This decision was taken knowing that this year (2006) the bio fuel rate has been 0.5%. However, the rate of 2% has not been achieved even in the EU. One can understand that the implementation cannot be fulfilled without significant political decisions and support. The main reason for this is that the price of bio fuels is not competitive with the present fossil-origin energy prices in Hungary. So in 2007 several regulations were modified. The most important one is perhaps the regulation of the revenue tax, which caused the successful tax-differentiation concerning bio fuels in more member states between 2007 and 2008. Its essence is that the revenue tax is not decreased, but if the fuel does not contain a bio fuel component of 4.4 bulking percentage per litre, „punishment” tax has to be paid. Moreover, on behalf of the implementation, regulations concerning bio fuels and bio fuel components are improving
    At present the production and the application of bio fuels without any support are not economical yet. That is why it is important to emphasize the support policy of our country. After joining the Union, the new members can receive some shares from the direct disbursements, but only a tan increasing rate, we can achieve the 100% in 2013, though there is an opportunity for national contribution. Energy plants produced in agriculture receive separate supplementary support which is an advantageous opportunity for the farmers of the sector. Bio fuels cannot only be supported through agriculture, of course, but by research development, investment etc.
    All in all, it can be concluded that Hungary seeks to fulfil the EU responsibilities taken and by this, to contribute to the maintenance of the sustainable progress, decrease of environmental pollution and the import dependency of energy sources.

  • Effect of vitamin e and selenium supplementation on the antioxidant content of milk and dairy products in dairy cows
    9-12
    Views:
    113

    In 2007, the aim of the Ányos Jedlik program and the call for tenders was to support application-oriented, strategic research and development projects, which can increase the competitiveness of the Hungarian economy. In the framework of our project, we intended to examine whether non-protected antioxidants - in this case: vitamin E and selenium – used as feed-additives can increase the antioxidant content of milk. The milk with an increased level of vitamin E and selenium content can be used for producing functional foods which will represent competitive products on the current market of milk products. Our results show that the use of vitamin E and selenium as feedadditives can significantly increase the amount of vitamin E and selenium in the milk and also in the diary products.

  • The hydric stress influence on quantityand quality of the maize yield in the Crisurilor Plainconditions
    21-27
    Views:
    108

    The paper is based on the researches carried out in an experiment placed on the preluvosoil from Agricultural Research and Development Station Oradea, Crisurilor Plain during 2008–2011in the following variants: V1=Irrigated, without irrigation suspending; V2=Irrigated, irrigation suspending in May; V3=Irrigated, irrigation suspending in June; V4=Irrigated, irrigation suspending in July; V5=Irrigated, irrigation suspending in August; V6=Unirrigated. The hybrid used: Fundulea 376. In the variant with optimum irrigation, water reserve on 0–75 cm depth was maintained between easily available water content and field capacity. Pedological drought was determined every year and the irrigation was also needed. The irrigation determined the increase of the total water consumption and yield gain in comparison with unirrigated variant. Irrigation suspending in different months determined the yield losses very significant statistically. The biggest protein content was registered in the variant without irrigation suspending; the values registered in the variants with irrigation suspending in May, June, July and August and in the unirrigated variant are smaller, with differences statistically assured. There was a direct link between de Martonne aridity index values and water consumption, yield and protein content and an inverse link between pedological drought and yield quantity and protein content. These are the arguments for irrigation opportunity in maize from Criurilor Plain.

  • Theoretical and comparative study regarding the Galerkin-Vlasov method use for study the free vibrations of wood flat plate
    223-228
    Views:
    48

    As for the historic record of the problem related to the study of flat plates, the first results were out for publishing at the end of the 18th century, the beginning of the 19th century, having Chladni E, Strehlke, Konig, R, Tanaka S, Rayleigh L, Ritz W and later on Gontkevich V, Timoshenko S, Leissa as pioneers. Each of the above mentioned authors have had significant contributions regarding the development of methods in order to solve the plates and establish some rigurous solutions of their differential equations of equilibrium. 
    The making of constructions, machines and different high-perfomance appliances, whose functioning should take place in safety conditions, have required theoretical studies of rich complexity, as well as practical experiments, within which the problem of their free and forced vibrations represent an important category in the respective theme of research.

  • Management of phytopathogens by application of green nanobiotechnology: Emerging trends and challenges
    15-22
    Views:
    250

    Nanotechnology is highly interdisciplinary and important research area in modern science. The use of nanomaterials offer major advantages due to their unique size, shape and significantly improved physical, chemical, biological and antimicrobial properties. Physicochemical and antimicrobial properties of metal nanoparticles have received much attention of researchers. There are different methods i.e. chemical, physical and biological for synthesis of nanoparticles. Chemical and physical methods have some limitations, and therefore, biological methods are needed to develop environment-friendly synthesis of nanoparticles. Moreover, biological method for the production of nanoparticles is simpler than chemical method as biological agents secrete large amount of enzymes, which reduce metals and can be responsible for the synthesis and capping on nanoparticles.

    Biological systems for nanoparticle synthesis include plants, fungi, bacteria, yeasts, and actinomycetes. Many plant species including Opuntia ficus-indica, Azardirachta indica, Lawsonia inermis, Triticum aestivum, Hydrilla verticillata, Citrus medica, Catharanthus roseus, Avena sativa, etc., bacteria, such as Bacillus subtilis, Sulfate-Reducing Bacteria, Pseudomonas stutzeri, Lactobacillus sp., Klebsiella aerogenes, Torulopsis sp., and fungi, like Fusarium spp. Aspergillus spp., Verticillium spp., Saccharomyces cerevisae MKY3, Phoma spp. etc. have been exploited for the synthesis of different nanoparticles. Among all biological systems, fungi have been found to be more efficient system for synthesis of metal nanoparticles as they are easy to grow, produce more biomass and secret many enzymes. We proposed the term myconanotechnology (myco = fungi, nanotechnology = the creation and exploitation of materials in the size range of 1–100 nm). Myconanotechnology is the interface between mycology and nanotechnology, and is an exciting new applied interdisciplinary science that may have considerable potential, partly due to the wide range and diversity of fungi.

    Nanotechnology is the promising tool to improve agricultural productivity though delivery of genes and drug molecules to target sites at cellular levels, genetic improvement, and nano-array based gene-technologies for gene expressions in plants and also use of nanoparticles-based gene transfer for breeding of varieties resistant to different pathogens and pests. The nanoparticles like copper (Cu), silver (Ag), titanium (Ti) and chitosan have shown their potential as novel antimicrobials for the management of pathogenic microorganisms affecting agricultural crops. Different experiments confirmed that fungal hyphae and conidial germination of pathogenic fungi are significantly inhibited by copper nanoparticles. The nanotechnologies can be used for the disease detection and also for its management. The progress in development of nano-herbicides, nano-fungicides and nano-pesticides will open up new avenues in the field of management of plant pathogens. The use of different nanoparticles in agriculture will increase productivity of crop. It is the necessity of time to use nanotechnology in agriculture with extensive experimental trials. However, there are challenges particularly the toxicity, which is not a big issue as compared to fungicides and pesticides.

  • Decreasing Energy and Water Use in the Meat Industry
    24-28
    Views:
    61

    The technology supervisions are needed from time to time in order to involve the new research results, experience, new technologies and equipments organising principles into the production and to make it cheaper and with less expenditure to increase the profitability and competitiveness. In the course of our investigation we aimed the analysis of the traditional technologies and improving of it. In this article we detail the heat treatment curing process. We applied the principles of experimental design for the determination the main influencing parameters in the processes. Then we made simulations and modelling in seeking for the environmentally better technology programs. We developed a method for measuring the temperature development of products with small diameter using the similarity theory in unit operation. In the course of the analysis of the heat treatment processes we could state that the heat treatment time can be reduced significantly by decreasing the size of the product and choosing the right ratios among the surface heat transfer intensity, ambient temperature and involving the lethality obtained during the cooling phase. The total sparing were about 10-20%. We solved the problem associated with the sensor placement error using a plastic material (metamid). We establish a curve between the real product temperature and plastic rod temperature by which the monitoring of the process became more accurate. We determine the size modification for different product sizes. In case of curing we observed very similar phenomena. For the determination of the diffusion coefficient we adopted the Ball-method not using in this field till today. We could reduce the excess saltiness and loss of NaCl with about 5%.

  • The importance of selenium in the living world and in the scientific research
    278-286
    Views:
    136

    Presently, selenium (Se) is one of the most investigated microelements. It has an important proven role in many vital processes. Directly or indirectly, selenium deficiency can play a role in the development of many diseases. On the other hand, the concentration range in which selenium is essential is narrow; there is a narrow gap between necessary and toxic content in dietary intake. In this context, selenium contamination poses a further health risk for people if they live near the industrial areas and mining activity.
    In this paper, we comprehensively introduce the very important trace element selenium. We studied the base parameters, deposit, analytic and deficiencies, problem of contamination and also the solution of contamination problems of selenium.