Search
Search Results
-
Dilemma of interpreting the Tisza space in regional dimensions
169-171Views:108This study deals with the evaluation of an especially important area, since the Tisza river is the basis of the spatial organisation of the Great Plain, the main spatial structural axis of Eastern Hungary and also its ecologic corridor of continental significance. The Tisza is a river which connects five countries to each other and it has an enormous catchment area. Its longest section can be found in Hungary. Two million people live directly in the spatial environment of the river. The safety and favourable quality of life of these people have to be provided. This is a great challenge from the aspect of regional development, economic, technological improvement, the acceleration of innovation processes, as well as the establishment of natural and environmental harmony.
-
The effect of dissolved oxygen on common carp (Cyprinus carpio) and basil (Ocimum basilicum) in the aquaponics system
89-96Views:267Aquaponics is an integrated system that combines fish farming (aquaculture) and hydroponic plant production. The objective of this study was to examine how the level of dissolved oxygen with or without an air pump affects water quality, fish output and plant growth parameters for common carp (Cyprinus carpio) and basil (Ocimum basilicum).
Ebb – and flood aquaponics systems (with automatic syphon) was used. Two treatments were set in this experiment, one of which was the aquaponics system without air pump (unit I), where water of the plant bed was pumped two directions, one falling back to the fish tank oxygenating the water the other was pumped to the hydroponics unit. The other system (unit II) was designed with an air pump.
In the course of the study, water quality parameters, such as oxygen saturation, dissolved oxygen (DO), electrical conductivity (EC) and nitrite were significantly different (p<0.05). Total basil biomass was higher in unit II. (5367.41 g). The final biomass of common carp were
2829.45 g ± 79.24 and 2980.6 g ± 64.13 g in unit I and unit II respectively. Weight gain (WG) and specific growth rate (SGR) showed no significant differences (p>0.05) between the treatments. -
The effect of season on the microbiological status of raw milk
95-99Views:117Many factors can influence the microbiological quality of raw cow’s milk. In this study, our aim was to determine whether there was any difference between the microbiological statuses of milk produced in different seasons. Samples were collected and analysed from five dairy farms in Hajdú-Bihar County, from February to November in 2019. During our studies, total plate count (TPC), coliform count and Staphylococcus aureus count of raw cow’s milk samples were determined.
There was no significant difference (P>0.05) between the mean TPC values detected in the milk collected in winter and autumn, but that values were significantly (P<0.05) lower than in the milk samples collected in spring and summer. Similarly to the TPC, in the case of coliform bacteria the lowest mean colony count was detected in the samples collected in winter. The difference was significant (P<0.05), compared to the values observed in the samples collected in summer. S. aureus was detected in bulk milk of only two farms in excess of 1.0 log10 cfu/ml. Also in case of S. aureus, there was a significant difference (P<0.05) between the values observed in the samples collected in winter and in summer. Samples from spring and summer contained the highest amount of S. aureus.
Based on the results of our studies, in the case of almost all farms the mean TPC, coliform and S. aureus counts were lower in the samples collected in winter, than in the samples collected in summer. The fact that the samples collected in winter contained the lowest amount of colonies could be attributed to the inhibition of growth of mesophilic microorganisms below 8 °C. Furthermore, the fact that we observed the highest colony counts in samples collected in summer, can be related to the heat stress of cows during the summer due to unfavorable weather conditions (high temperature and humidity).
-
The effects of bioactive feed additives for the production parameters of common carp (Cyprinus carpio) fingerlings in intensive recirculating system
35-41Views:213For the appropriate quantity and quality of fish meat the pond farmers need to use up to date nutrition and feeding technologies. Recently the intensification of the carp production is stepping up with the availability the proper quality of the artificial feeds. The using of different feed additives make a better feed conservation ratio, faster growing rates and more uniform stocks.
In our experiment what is made with common carp (duration of the experiment was 8 weeks long) we compared two different kinds of feed additives in different doses. One of them contains only natural mineral elements and the other additive is a natural origin probiotics. Both additives were used in the quantity of 0.5, 1 and 2% of the total feed. By the result of the 8 weeks experiment it could be said, that the using of the humic acid based mineral elements feed additive. Makes a better FCR comparing with the control stock, but was not as good as the using of the probiotics. At the humic acid treatments the more doses, the better FCR value, but at the probiotics it wasn’t true. The 0.5% probiotic treatment gave the best result. It is concluded that the using of the probiotic feed additives always gave a better performance of the fishes (average weight, biomass, FCR) than the humic acid treatments. The using of the feed additives hasn’t got an influence for the survival rate of the carps.
-
Application of laparoscopic artificial insemination in conventional Lacaune sheep farm using frozen-thawed semen
133-138Views:237The complex anatomical structure of the ewe reproductive tract accompanied with low quality of frozen ram semen for artificial insemination, resulted in a challenge with regard to using superior genotypes for reproductive ovine performance. Hence, improved genetics in ovine management has not been efficiently and widely used especially in undeveloped countries. Therefore, intrauterine semen deposition by laparoscopic insemination should be adopted in the current sheep production systems. Thus, this study aimed to assess the pregnancy rate and lambing rate of ewe inseminated by laparoscopic insemination techniques using frozen-thawed semen. The research used imported frozen semen from two rams of the Lacaune breed. Ewes were grouped according to age in years (1, 2 and 4). Before insemination, the semen was examined microscopically for its motility and viability and thereafter the laparoscopic artificial insemination technique was performed to 19 Lacaune breed ewes using frozen-thawed semen. The overall pregnancy and prolificacy rates were 31.57% and 42.10% respectively. Out of 2 ewes in the 1-year age group that were inseminated, only 1 ewe lambed representing 50%. However, from 16 ewes inseminated of four-year age group, 5 ewes lambed representing 31.25%. Significant difference based on age group was not evaluated due disproportionate of the data, (such that the data included 2 ewes in one-year-old age, 1 ewe in 2-year-old age and 16 ewes in 4-year-old age). Based on the ram semen, 33.33% and 30% of the inseminated ewes were pregnant from ram A and ram B semen respectively. However, in the case of prolificacy rate, 44.44% and 40 % of the ewes lambed from using semen of ram A and B, respectively. There was no significant difference (p>0.05) in pregnancy and prolificacy rates based on semen from the two rams. In conclusion, in this research study, ram semen had no significant effect on pregnancy and prolificacy rates using laparoscopic AI on Lacaune sheep. This could be due to the fact that the rams had very good quality semen. Evaluation of ram semen, accompanied with appropriate ewe selection based on age and rightful deposition of semen could lead to better and more consistent results. Overall this could contribute to the successful application of laparoscopic artificial insemination in Lacaune sheep production systems for enhanced productivity.
-
Possibilities of Growing Artichoke (Cynara scolymus L.) in Hungary
126-130Views:85The domestication of choice broadening, special vegetable species offers new market possibilities in Hungary. The production of artichokes has good perspectives due to its high protein, vitamin and mineral contents and its wide usability. According to the literature, in Hungary it is worth examining the annual production technology, which has yet to be researched in our country. The basic aim of our work was to establish the annual production of artichoke in Hungary with scientific research.
In the experiment, 5 Italian sorts (Valetta di Roma, Gobbo di Nizza, Violetto di Romagna, Violetto S. Francesino and Precoce di Romagna), 1 American sort (Green Globe) and 1 Egyptian sort (Balady) were used. For one half of the plants, we tried to bring on bud-production appearing in the first year only with early planting, while we used also a gibberellic acid hormone treatment for the other half.
Only the sort Green Globe had yields in appropriate quantity (21.4 t/ha) and quality. The low yield and inequable quality of buds of the Italian and Egyptian sorts refers to the fact that these sorts are not applicable for annual production in Hungary. Although the gibberellic acid treatment resulted an earlier harvest, increased the equality of buds and increased the proportion of stems producing buds except for the sort Green Globe, overall it did not have a positive effect. The hormone treatment fastened the physiological processes of the plants, thereby it induced early insenescence and lignifying of the buds. The high temperatures during the bud-formation period largely increased the ratio of flabby, over-blowing buds, so the planting must be timed in the future that the harvest period is in early automn or late spring, early summer months.
According to our results, globe artichoke can become a perspective culture by applying cold-resistant sorts with short growing seasons, which can be produced as annual crops without hormone treatment by the appropriate timing of bud-formation. -
Effect of NPK fertilization on the yield and yield stability of different maize genotypes
101-104Views:117The yielding capacity and quality parameters of 11 maize hybrids were studied in 2011 on calcareous chernozem soil in a 25-year long-term fertilization experiment in the control (without fertilization), in the base treatment of N 40 kg ha-1, P2O5 25 kg ha-1, K2O 30 kg ha-1 and in five treatments which were the multiplied doses of the base treatment. The N fertilizer was applied in the autumn and in the spring, while P and K fertilizers were applied in the autumn.The sowing time was 17–18 April, the time of harvest was 8 October. The 30-year average of precipitation (April–Sept) was 345.1 mm, the amount of precipitation did not differ greatly from that, however, its distribution was very unfavourable.
It was found that the largest yield increment (as compared to the control) was in the treatment N 40 kg ha-1, P2O5 25 kg ha-1, K2O 30 kg ha-1 in the long-term experiment. The largest yields were obtained for the hybrids P9494, PR37N01 and PR35F38 (13.64–13.71 t ha-1). Due to the dry period at the end of the summer – beginning of autumn, the grain moisture content at harvest was favourably low, 12–18% depending on the treatment and the growing season.The N fertilization significantly increased the protein content of the kernel, but the starch content of the kernel decreased (significantly in several cases) with increasing fertilizer doses and yields as compared with the control.
The highest protein content was measured in hybrids GK Boglár and Szegedi 386. The oil content was above 4% for GK Boglár, but the two hybrids were not among the best yielding hybrids in spite of their good inner content. The starch content was around 75 % without fertilization, it decreased with fertilization.
For the tested hybrids, the fertilizer dose N 120 kg ha-1, P2O5 75 kg ha-1, K2O 90 kg ha-1 can be recommended with respect to efficacy and environmental considerations. -
The effects of drought stress on soybean (Glycine max (L.) Merr.) growth, physiology and quality – Review
19-24Views:186Abiotic stresses are one of the most limiting factors inhibit plant's growth, leading to a serious production loss. Drought stress is one of the most destructive abiotic stresses and is still increasing year after year resulting in serious yield losses in many regions of the world,
consequently, affecting world’s food security for the increasing world population. Soybean is an important grain legume. It is one of the five major crops in the world, an essential source of oil, protein, macronutrients and minerals, and it is known as the main source of plant oil and protein. Harvested area of soybean is increasing globally year after year. However, soybean is the highest drought stress sensitive crop, the water deficit influences the physiology, production and seed composition of this crop. We introduce a review for literatures concerning the changes of the above traits of soybean exposed to drought stress, with past explanations for these changes. -
Effect of different N doses on maize yield and quality
97-101Views:144The effect of N doses on the yield and nutritional values of the Sushi (FAO 340) maize hybrid were analysed in three years (2018, 2019, and 2020). The analyses were performed at the Látókép Experimental Station of the University of Debrecen on calcareous chernozem soil, in a striped, small-plot, non-irrigated long-term field experiment. In the experiment, in addition to the non-fertilized treatment (A0), the N-fertilizer doses were applied as basic fertilizer and top dressing. The 60 and 120 kg N ha-1 dose (A60, A120) applied as spring basic fertilizer were followed by two phases of top-dressing in V6 (V690, V6120) and V12 (V12150, V12180) phenophases; the amounts were +30 and +30 kg N ha-1.
Maize yields were affected to varying degrees by crop year. The highest yields in 2018 and 2020 were recorded in the same V6150 treatment, while in 2019 the highest yield was obtained in the A120 treatment.
Increasing the N doses resulted in an increase in the protein content of the maize kernel. Depending on the fertilizer treatments and the crop year effect, the protein content of maize kernels varied between 6.2–10.2 g x 100 g-1. In all three years, the protein content was the lowest in the control treatment (A0) and the highest in the V6150 treatment.
The starch content ranged from 70.7 to 77.9 g x 100 g-1 in the average of the three years. In 2020, it was significantly higher in all nutrient treatments than in the other examined two years. The highest starch content - except for 2020 (A120, 77.9 g x 100 g-1) - was recorded in the A0 treatment (74.2, 72.3 g x 100 g-1).
The oil content of maize kernels varied between the values of 3.8 and 5.2 g x 100 g-1 in the average of three years. In terms of oil content, the results for 2018 and 2019 can be considered the same, while in 2020 it was significantly lower. Fertilizer treatments did not significantly affect the oil content of maize in any of the years.
The fertilizer dose applied in the V12 phenological phase was not effective in terms of yield and nutritional content (protein, starch and oil content).
-
Study on the Work Organization at Dairy Farms
293-296Views:47Joining the European Union Hungarian producers have advantages but they need to solve some problems too. Only those producers can compete who will be able to produce extra quality milk. However the circumstances of milk production are not up to the task.
The author examined the work organization of 7 dairy farms in Hajdú-Bihar County. Data were collected about the situation of farms, equipment of barns, objets of production, work force, qualification of workers, and productivity of work. He examined the applied motivation methods at farms. He concluded that as the number of cows per farm increases work productivity increases too. From the examination it appeared that family farms applied different motivation system from bigger producer organizations. The author put forward proposals for motivation possibilities to improve milk quality, atmosphere, and general feeling of workers. -
Overview of test methods used to classify wheat flour and bread samples – REVIEW
27-34Views:53In Hungary, common wheat (Triticum aestivum ssp. vulgare) is of good quality and world famous. In addition, it plays an important role in the human diet. The classification of flours ground from wheat is quite decisive and there are several methods for its examination. The most important flour testing requirements include moisture content, protein content gluten properties and the most important bakery value number. The measured characteristics give us the opportunity to conclude about the properties of the dough, and then bakery products. Several dynamic and static methods have been developed to study the physical properties of dough. The evaluation of products can be carried out in several respects with the help of a baking test. The multitude of methods currently used to qualify flour, dough and finished products also proves that the overview of the methods is quite topical.
-
Testing disease resistance in autumn wheat genotypes by means of field experiments
30-40Views:80According to our scientific results we can state that we have to use integrated pesticides management in crop protection against the diseases of winter wheat. One of the most important elements of IPM is to select a genotype characterised by good resistance to diseases (and by high yield ability and excellent baking quality). It is especially important that the wheat variety have tolerance against not only to one or two leaf and spike (grain) diseases, but „complex” tolerance. It is not necessary to give up the growing of a variety which has susceptibility to different diseases because we can protect it using appropriate chemical management. In the intensive growing stage of wheat (BBCH 32-37) we can use a noncompulsary fungicide-treatment (depending on e. g. the infection, ecological conditions) and, at the beginning of the flowering stage
(BBCH 59-65), we have to use a compulsary fungicide-treatment (in spite of e. g. special weather conditions, resistance genotype)to ensure high yield and good quality. -
The effects of fertilization on the protein related properties of winter wheat
67-69Views:128The yield and quality of wheat are mainly determined by the plant production system, thus we studied the effect of mineral fertilization.
The field trials were set up in 1983 at the Látókép Research Institute of the University of Debrecen. We examined effect of different Nfertilizer doses (60 kg ha-1 N/P/K, 120 kg ha-1 N/P/K) on Lupus, Mv Toldi and GK Csillag's protein properties in 2012. During the tests, three quality parameters were determined: wet gluten content (%), wet gluten spread (mm/h) and gluten index (%). In the experiment the effect of different doses of N-fertilizers significantly influenced by the wet gluten content and gluten index of Lupus.
-
Effects of the development of production factors on productivity
13-18Views:118In every economic sector, the enacted and expected quality of the products strongly affects its market entry and subsistence. The aim of management is success, competitiveness and subsistence that require adequate human and material resources and enough production stock. We must also notice that the quality of tools and instruments significantly influences work productivity. This applies to both plant production and animal husbandry.
The author researched milk production factors with methodical observation, document analysis and interviews. Data were collected with a ten-year interval, thus this assay can highlight the field, volume and sources of investments during this period and that the production stock increased in most farms and decreased in few. The data also shows the influence of investments on work productivity - there are differences between farms of equal size, so there are still ways of development.
-
Procurement as enterprise function at vegetable and fruit processing companies
228-235Views:62The first main element of the supply chain is procurement; which has a great influence on the quality of products and services. The most important role of the procurement is the purchase of inputs which are necessary for the operation of companies. This includes procurement planning and the development of procurement strategy, so procurement is a process that is even more than simply buying raw materials. The functions of procurement are the selection of suitable suppliers, contracting, controlling and improvement of suppliers, and coordination of activities with other parts of the company.
Planning of procurement, strategy formulation, supplier selection and evaluation, monitoring of the procurement process, and modification of original plan are important tasks of entrepreneurial procurement. The importance of procurement in a business organization is reflected by its position in the hierarchy of the firm. There are subjective and objective methods to select suppliers accomplishing their tasks on time and with good quality. Efficient purchasing management activity contributes to an increased competitiveness of the enterprise. The aim of this publication is to describe the procurement activities, to examine supplier selection and evaluation methods, to determine the position of procurement in the organization, and to prove the strategic importance of procurement. -
Study of effects on quality of different wheat flour fraction
123-129Views:96Wheat is one of the most important cereals in the world and the bread made of its flour belongs to the everyday life of human mankind.
The Hungarian standard relating to the laboratory production of wheat flour (MSZ 6367/9-1989) does not mention the type of laboratory mill used for milling, and it only builds up some general criteria, such as: the laboratory mill should be provided with four differently nicked barrels, a sieve with appropriate hole sizes, and also with the separated collections of the pilot flour and the bran. Our study was started at this point and the answers for the following questions were aimed to be found: do the flour patterns studied and produced with different grinding and sieving
techniques, widely used in laboratory mills of the same wheat pattern show any alterations after the impact of the formula production as regards chemical constitutions and reologic parameters. Various flours and whole grains of the wheat patterns sieved with different particle sizes were studied in this experiment. In producing this pattern two different mill types of FQC 109 and CHOPIN CD 1 as well as two different grinder types such as PERTEN 3100 and type of RETSCH 200 were applied. There were 3 different corn sizes of 160; 250; 800 μms used in the partition of the fractions. To study the differences the following measurements were conducted: dry matter, ash, protein content, wet gluten content, gluten index, gluten expansiveness, farinographic value, falling number and amilographic rate.
The results this research confirm that the quality of wheat flour can be modified by different methods of pattern production. In all cases the differences can be explained by the flour-bran ratio, and in some of the cases the higher germ content of the fractions also played a role. The results show differences between the various types of mills and grinders, too. -
The examination of presumed Escherichia coli count of raw milk samples on several milk production farms
31-37Views:104For dairy farms, it is of great importance to insure the appropriate hygienic status of milk and to examine it regularly. Escherichia coli, belonging to the coliform bacteria type of, is a good indicator of contamination, and therefore suitable for characterising the hygienic condition of milk production.
The aim of our research was to examine the connection between the Escherichi coli count in bulk tank milk and housing and milking technologies of different-sizes farms. We examined the relation using various statistical methods.
Analysing the connection between the E. coli count and the farm size we found no significant difference between the farms. On the basis of the mean values of the E. coli count, we can say that the hygienic conditions are appropriate for mid-sized farms, and tolerable for large farms. We found differences in the hygienic status among the small farms. Half of the eight small farms, had no adequate hygiene. The results of the analysis of the quality categories show that the probability of inadequate quality milk was the largest on small farms (37.5%).
Comparing the various housing and milking methods with each other, there were numerical differences in the E. coli count, but these differences were not significant. We got higher E. coli count values on those farms using tied stall barn and bucket milking installation. The reason for this could be that in cases of farms using bucket milking installation, it is harder to meet the requirements.
After forming groups by farm size, housing and milking methods, we found that the E. coli counts are adequate on mid-size farms using various housing and milking methods; and tolerable on those large farms using loose housing stable and a milking parlour. At the same time, we found inadequate E. coli counts on the smaller farms using tied stall barns and bucket milking installation.
The results show that if there is suitable attention, independent of farm size, housing and milking procedure, it is possible to produce milk with low E. coli counts, and to insure appropriate hygienic conditions.
Further detailed examinations are needed to decide which factors of housing and milking technologies influence the E. coli count of bulk tank milk. -
Preface
5Views:29In the frame of a common “Hungarian-Ukrainian Intergovernmental S&T Cooperation Programme” which title is “Change of soils ecological characteristics of Ukraine and Hungary in the conditions of anthropogenic transformed ecosystems and optimization of biological processes of plants primary feeds elements mobilization” a Workshop was held in Debrecen. The member institutes of project participated with different presentation in this program.
The title of Workshop was: “Anthropogenic effect on the properties of Middle and Eastern European chernozem soils and on the sustainable agricultural production”.
The aim of the Workshop was to give relevant information about the present situation of the Middle and Eastern European Chernozem soils, especially emphasize the effect of different loading on the quality (properties) of chernozem soils. With the Workshop we would like to create a tradition for discussion about the anthropogenic effect on the soil properties and through it on the productivity of different soils. It was a forum for discussion of research results related to problems and possibilities for prevention of soil quality. With this possibility we would like to contribute to the sustainable agricultural production.
The papers were read for the publisher and we would like to show them in a separate supplement of Journal of Agricultural Sciences, Acta Agraria Debreceniensis as one of the results of the project.
The papers comply with the requirements of the scientific issue except those two which show the university and the department of the Ukrainian partner taking part in this project.
The participant Institutes of the project:
- Dnepropetrovsk National University, Faculty of Biology and Ecology;
- Kryvyi Rig Botanical Garden NAS of Ukraine, Plant Physiology & Soil Biology Department;
- Department of Agrochemistry and Soil Sciences of Centre for Agricultural and Applied Economics;
- Research Institute of Karcag, Centre for Agricultural and Applied Economics. The collaboration with Ukrainian partners was successful and we have confidence in the further cooperation in scientific research. -
Effect of plant growth promoting Rhizobacteria (PGPRS) on yield and quality of processing tomato under water deficiency
19-22Views:168Chlorophyll fluorescence was measured of H1015 tomato hybrid with different bacterial treatments (B0–B1–B2–B3) and three irrigation treatments: regular irrigated (RI), deficit irrigated (DI) and non-irrigated conditions (I0). The aim of the experiments was to show the effects of plant growth promoting rhizobacteria on the yield, dry matter and vitamin C content of processing tomato during different irrigation treatments, and measuring the chlorophyll fluorescence during the ripening and development stages. According to the results, none of the bacterial treatments had a statistical effect on the quantity and quality of the tomato and on the chlorophyll fluorescence, only the irrigation. Further studies are needed.
-
Technological and Economic Analysis on the Hungarian Rice Sector
226-233Views:66Hungary lies on the northern edge of rice production area. According to this, the climatic conditions area not perfect for this species. The production area of rice involves typically the poorer quality soils, however these meet the requirements of rice. In Hungary exclusively domestic types are grown which have high yield and good quality and these are usually wore successful than foreign types. On the other hand, these Hungarian types should be improved considering safety in production. Nowadays, rice is grown in large scale companies with 300-1400 hectares, where production technology already exists, machinery is suitable, however the latter one a little bit old.
The average yields of the analysed companies were 3-4 t/ha in the past few years, which were a little bit above the national averages. The operating cost per hectare is almost 200 thousand HUF, from which the main part is the cost of machinery (35%) and the material cost (34%). The main part of the latter one is the irrigation costs (30%). The average cost, calculated from the total production cost, is 80 thousand HUF/t. Considering the above-mentioned costs and the price of rice (75 thousand HUF/t) it can be stated that the profitability of the rice sector is not the best, the cost rated profitability is -6.6%. According to the results of this analysis possibilities for the increase in profitability and improvement are increased subsidies and market price, as well as genetic improvement. -
The examination of alveographical parameters of winter wheat varieties
87-91Views:114Nowadays, many methods have been worked up in the interests of objective expression of winter wheat rheological quality. These define wide spectrum in view of their complexity and apparatus claim. The needs for the methods are definitely increasing in Hungary, too. It is very important to get acquainted with the alveographical quality and qualification and also their using in wide range.
In our research we examined the alveographical parameters of 12 winter wheat varieties in Szeged (in Hungary) on the basis of the results in three years (2005-2007).
We established with correlation analysis that there is no statistical relation between the alveaographical W and G values. The other alveographical parameters have significant correlation. -
Tulip bulbs preparation by heat treatment for forced culture in green house
70-72Views:71Tulip can be grown in parks as ornamental plant and cut flowers, or possibly in protected areas for cut flowers during winter and early
spring.
An important condition for the successful cultivation of tulips is the quality of the bulbs that are going to be planted and their
biological preparation.
Under the quality aspect bulbs have to be uniform and large, preferably with circumference greater than 11 cm and must have good
phytosanitarical status.
Preparation of organic bulbs for ensuring the continuation of the differentiation process of germs (floral), is made during the storage.
It is known that the preparation of organic bulbs are made in interaction with environmental factors, among which temperature plays an
important role. At the beginning and throughout the process of biological preparation, temperature is maintained at a higher level then the
temperature must be low until planting.
The temperature level and the duration of treatment varies by followed objective respectively early or late flowering and staggered
flowers production over a longer period of time. -
Scientific background of precision animal nutrition
95-99Views:105Precision animal nutrition consists of meeting the nutrient requirements of animals as accurately as possible in the interest of a safe, high-quality and efficient production, besides ensuring the lowest possible load on the environment. This is facilitated by electronic feeding based on IT technology, an important but by far not the only tool of precision nutrition. In the present paper the following most important elements of precision nutrition are discussed: diet formulation, quality control of ingredients and compound feeds, reduction of the harmful effects of heat stress in pigs with different nutritional tools, application of the recent findings of the molecular genetics in animal nutrition, the relationship between genetics and animal nutrition and reduction of the N and P excretion by nutritional tools.
-
Determination methods of quality parameters of Prunus cerasus
107-111Views:138Sour cherry (Prunus cerasus) is a non-climacteric fruit. Storage optimization would enable the expansion of fresh consumption. The quality parameters are required for storage optimization. Those parameters are sugar content, acid composition, mineral content and alcohol content,
moreover it is also planned to determine antioxidants, vitamins and patulin mikotoxin under different conditions. In this paper, we demonstrate the measurement options of these parameters. -
Experiment of quality properties of dehydrated fruits
7-15Views:100The lyophilization is the joint application of freezing and drying. It is an up-to-date conserving procedure, the point of which is that the humidity existing in the frozen humid material is transferred from the solid state directly into the gaseous state at a temperature below 0 oC under vacuum. Out of the procedures applied nowadays, this is the most tolerant drying process.
With regard to the high investment and operational costs, freeze drying is applied only for valuable, heat-sensitive materials when the technological aim is to preserve such properties as aroma, taste and colour as well as such components as proteins and vitamins. This procedure is suitable for drying and conserving certain foodstuffs, stimulants, organic chemicals, medicines and similar sensitive and valuable materials.
In our institute, we have been conducting freeze drying experiments with regional fruits and vegetables since the year 2005. During the first phase, we examined the heat- and material transfer as well as the abstraction of humidity, while during the second phase we analysed the rehydration ability and nutrient content of the freeze-dried materials as compared to those dried with the method of convection. Moreover we have conducted penetration measurements with a portable hardness tester.
To sum up the results gained so far, we can state that the quality of the lyophilized materials is better than those dried in the traditional way. It originates partly in the fact that the temperature and pressure applied for the freeze drying are smaller and the drying period is far longer than for the convection drying.
In contrast to convection-dried materials, freeze dried materials set in close to their original water-content, keep their original shape and size after being rehydrated. The reason of it the porous, spongy structure (flexible cell wall) of the lyophilized products which is able to take up moisture quickly. In addition, the lyophilized products can be rehydrated faster than those dried in the traditional way.
Regarding the results of the chemical analyses, the following conclusion can be drawn: the vacuum freeze drying results a small decrease of nutrient content and nutritive value for the lyophilized products.
The results of the hardness tests support the statement that the majority of agricultural materials cannot be considered as an ideal flexible body, because during the experiment the flexibility coefficient changed when going from the surface of the material inwards. In addition, the penetration tests also confirm that the surface of the convection-dried vegetables is at least 1.5-3 times harder than that of the freeze-dried products. The reason of it that it takes place during the drying denaturation processes.
The article summarizes the results of our research work listed above, in accordance with our experiments conducted by using the characteristic fruits (apple, plum) of the Nyírség Region.