Show Advanced search options Hide Advanced search options
Comparative analysis of maize hybrides grown for bioethanol production purposes
Published May 16, 2012

The objective of this study was to evaluate the effects of crop year on the main components of maize grown for bio-ethanol production yield, starch content and starch yield per hectare of maize hybrids were investigated in a droughty (2007) and in a favourable years with optimal weather conditions (2008, 2009). We measured very low starch yield... (1.5 t ha-1) in the year with unfavourable precipitation supply (2007) together with higher starch content (73%). In the case of good precipitation supply we measured a much higher starch yield per hectare (7.7 t ha-1) with lower content (72.4%). In 2009 the starch content (74.5%) exceed the results of the two previous years, but on the other hand the average of starch yield was (4.9 t ha-1) which falls between the other two years values.

Show full abstract
Biomass production estimation of processing tomato using AquaCrop under different irrigation treatments
Published December 15, 2019

The wiser usage of irrigation water is inevitable in the future. Irrigation has very high input cost; therefore, farmers must carry out irrigation with care. Also, the effect of irrigation on crops has a big role in decision making. Modeling provides a possibility to evaluate this effect. AquaCrop, as a crop production simulation model has grea...t potential in this field. The accuracy of tomato biomass yield prediction of the model was tested in this research. For collecting the necessary data, a field experiment was conducted at Szarvas on processing tomato with different water supplies, such as 100% (I100), 75% (I75), 50% (I50) of potential evapotranspiration and a control with basic water supply (C). The relation of the simulation and actual biomass yields was evaluated during the season. Very good correlation was found between the modelled and the actually harvested data. The data for the control and I100 treatments showed higher correlation than the I75 and I50. The relationship for all of the data was moderately strong. Miscalculations occur mostly when the dry biomass yield reaches
7 t ha-1. The accuracy of the model was evaluated with the use of mean absolute error (MAE) and root mean squared error (RMSE) values. The least error was found in the C treatment, which means 0.34 MAE and 0.45 t ha-1 RMSE. The simulation resulted in higher errors in the I75 and I50 treatments.

Show full abstract
Comparison of Pálfai’s drought index and the Normalised Precipitation Index in the North Great Plain region
Published February 17, 2015

Agriculture has always been an important role in economy, food supplies, sustainability of society and creation of job opportunities in Hungary. Our country has resource-related strength of agriculture, because we have more than 4.5 million ha for agricultural production. Agricultural production can be influenced by several factors, including c...limate, hydrology, soil conditions and antropogenic impacts. Climate determines the quality and quantity of the crop yields. The climate conditions in Hungary are variable and it shows spatial and temporal extremes. As a result of this, drought have become more frequent in our country (2003, 2007, 2009, 2012), which is reflected in the decline in yields as well. In the present study, Pálfai's Drought Index (PAI) and the Standardized Precipitation Index (SPI) were compared 2003–2012 in Debrecen. The temperature and precipitation data were calculated from data provided by a local meteorological station to work out PAI, while the SPI-3 index values were downloaded from the database of the European Drought Observatory. This allowed to drought assessment in a local and regional scale. Our study was supplemented with SPI-3, soil moisture anomalies, PAI and yields of wheat (Triticum aestivum L.) and maize (Zea mays L.) to evaluating the impact of drought on agriculture.

Show full abstract
Biomethane production monitoring and data analysis based on the practical operation experiences of an innovative power-to-gas benchscale prototype
Published September 5, 2018

Power-to-gas (P2G) is referred to technologies that convert carbon dioxide into methane. Both bio- and chemical catalysts may be used for conversion purposes. One of the most disruptive biotechnologies was developed by the University of Chicago (IL) (publication number: EP2661511B1), using a robust, highly selective, patented strain of Archaea.... Electrochaea GmbH has developed an innovative bench-scale P2G prototype unit, which uses this highly efficient Archaea strain, specialized components and specifically developed control strategies. The structure and the components of the prototype are equivalent with the functional parts of the currently largest commercial scale biomethanation BioCat plant located in Avedøre, Denmark ( Power-to-Gas Hungary Kft. has committed to further develop this innovative technology. The first steps of this development have been taken by operating the benchscale unit and analyzing the data of the operating periods.

The prototype is operated based on weekly campaigns. During continuous operation, H2O is generated as a by-product of methane. Therefore, approximately 200 ml of biocatalyst is discharged each day and concentrated media containing macro and micronutrients are injected into the reactor to maintain media composition. The laboratory staff records all gas composition data each morning. The gas composition is measured every 12 minutes by an Awite AwiFlex Cool+ gas analyzer. Within this article, we analyze the collected datasets containing more than 12 000 records and present the first practical experiences of the operations of the innovative power-to-gas bench-scale prototype.

The analysis of the collected gas composition data of the product gas already provides important data for modelling the commercial-scaled processes. The average value of VVD was about 40 l/l/d in the period under review. Further increase of the methane content can be achieved by introduction of higher mixing energy and by increasing pressure levels in the bioreactor (as demonstrated in the BioCat plant – data not shown here) – both of which are strategies envisioned for the commercial plant. In routine activities (turn on, shut down, continuous operation) we could verify the high robustness of the biocatalyst and the base connection between the registered datasets and performed test results.

Show full abstract
Application of laparoscopic artificial insemination in conventional Lacaune sheep farm using frozen-thawed semen
Published December 1, 2020

The complex anatomical structure of the ewe reproductive tract accompanied with low quality of frozen ram semen for artificial insemination, resulted in a challenge with regard to using superior genotypes for reproductive ovine performance. Hence, improved genetics in ovine management has not been efficiently and widely used especially in u...ndeveloped countries. Therefore, intrauterine semen deposition by laparoscopic insemination should be adopted in the current sheep production systems. Thus, this study aimed to assess the pregnancy rate and lambing rate of ewe inseminated by laparoscopic insemination techniques using frozen-thawed semen. The research used imported frozen semen from two rams of the Lacaune breed. Ewes were grouped according to age in years (1, 2 and 4). Before insemination, the semen was examined microscopically for its motility and viability and thereafter the laparoscopic artificial insemination technique was performed to 19 Lacaune breed ewes using frozen-thawed semen. The overall pregnancy and prolificacy rates were 31.57% and 42.10% respectively. Out of 2 ewes in the 1-year age group that were inseminated, only 1 ewe lambed representing 50%. However, from 16 ewes inseminated of four-year age group, 5 ewes lambed representing 31.25%. Significant difference based on age group was not evaluated due disproportionate of the data, (such that the data included 2 ewes in one-year-old age, 1 ewe in 2-year-old age and 16 ewes in 4-year-old age). Based on the ram semen, 33.33% and 30% of the inseminated ewes were pregnant from ram A and ram B semen respectively. However, in the case of prolificacy rate, 44.44% and 40 % of the ewes lambed from using semen of ram A and B, respectively. There was no significant difference (p>0.05) in pregnancy and prolificacy rates based on semen from the two rams. In conclusion, in this research study, ram semen had no significant effect on pregnancy and prolificacy rates using laparoscopic AI on Lacaune sheep. This could be due to the fact that the rams had very good quality semen. Evaluation of ram semen, accompanied with appropriate ewe selection based on age and rightful deposition of semen could lead to better and more consistent results. Overall this could contribute to the successful application of laparoscopic artificial insemination in Lacaune sheep production systems for enhanced productivity.

Show full abstract
The examination of presumed Escherichia coli count of raw milk samples on several milk production farms
Published May 23, 2006

For dairy farms, it is of great importance to insure the appropriate hygienic status of milk and to examine it regularly. Escherichia coli, belonging to the coliform bacteria type of, is a good indicator of contamination, and therefore suitable for characterising the hygienic condition of milk production.
The aim of our research was to the connection between the Escherichi coli count in bulk tank milk and housing and milking technologies of different-sizes farms. We examined the relation using various statistical methods.
Analysing the connection between the E. coli count and the farm size we found no significant difference between the farms. On the basis of the mean values of the E. coli count, we can say that the hygienic conditions are appropriate for mid-sized farms, and tolerable for large farms. We found differences in the hygienic status among the small farms. Half of the eight small farms, had no adequate hygiene. The results of the analysis of the quality categories show that the probability of inadequate quality milk was the largest on small farms (37.5%).
Comparing the various housing and milking methods with each other, there were numerical differences in the E. coli count, but these differences were not significant. We got higher E. coli count values on those farms using tied stall barn and bucket milking installation. The reason for this could be that in cases of farms using bucket milking installation, it is harder to meet the requirements.
After forming groups by farm size, housing and milking methods, we found that the E. coli counts are adequate on mid-size farms using various housing and milking methods; and tolerable on those large farms using loose housing stable and a milking parlour. At the same time, we found inadequate E. coli counts on the smaller farms using tied stall barns and bucket milking installation.
The results show that if there is suitable attention, independent of farm size, housing and milking procedure, it is possible to produce milk with low E. coli counts, and to insure appropriate hygienic conditions.
Further detailed examinations are needed to decide which factors of housing and milking technologies influence the E. coli count of bulk tank milk.

Show full abstract
Methane emission from Matsuo rice paddy field in light of different fertilizers, costs, profit and carbon credit
Published March 23, 2016

Nowadays global warming is a major issue to our environment. This issue is generated by the modern human activities like industry and intensive agriculture. This research is about methane emission from rice paddy fields. The aim of the study is to lower the methane emission from the field with the help of using different type of fertilizers, wh...ilst we keep in focus the efficient economic operation. The main experimental field is Matsuo paddy field, (Matsuo town, Sanbu city, Chiba prefecture) which is analyzed by the Chiba University’s soil science laboratory, they provided the data for this study. During the study three type of fertilizer was analyzed which are all organic and the control was a regular chemical fertilizer. For all fertilizers the cost and income of the production were calculated and the profit was weighted with the methane emission what a specific fertilizer produced during the cultivation. In the future if the organic fertilizers are in focus than it is necessary to find a new material what can be competitive with the chemical fertilizers in focus of GHG emission or find an alternative way of the usage of methane in biogas production.

Show full abstract
Strategic Steps in the Sheep and Goat Branches
Published December 4, 2001

The balance of the sheep and goat branches can be summarised as follows:
If the increase in stock size, specific yields, genetic improvement and modernisation are not realised, several thousand shepherds will lose their jobs and possibilities to work, and their families will lose their only source of livelihood.
Several hundred hectares o...f grassland will become weedy and the costs of crop protection will increase in these regions. Pollen pollution, the number of allergic ailments and medical costs will increase, mentioning only the main disadvantages. Its financial requirement is nearly equal to the one required for development without any essential compensation or production.
In order to develop a competitive branch, a subsidisation of 10-20 billion HUF is needed until the accession of Hungary to the EU, depending on the scale and progressivity of development. The subsidisation and realisation of the strategic steps would result in:
– the establishment of a registered livestock with 1.5 million ewes, which would ensure better market position for the branch in the EU (5%),
– the establishment of a competitive and marketable branch with a production value of 15-25 billion HUF, calculated using the present price level (after accession, the branch would be self-operating and profitable, with the 6-8 billion HUF/year normative subsidisation by the EU),
– the establishment of a genetic potential which would ensure our participation in profitable international breeding animal market, which provides extra profit,
– the establishment of a sheep husbandry with better genetic potential and phenotypic performance, producing a quality of international level,
– the maintenance of the workplace of more than 10.000 people (saving 3-5 billion HUF/year of the budget),
– the maintenance of the condition of growing areas of grasslands with their advantages (crop protection and public health) whose financial effect is considerable.

Show full abstract
The Possibilities of Futures and Option Hedge in Price Risk Management for GrainProduction
Published November 26, 2003

The greataest risk tograin production is fluctuation in market prices, which is over 50% over the course of a year; and year by year, as well. There are real market circumstances in the grain market, instead of state guaranteed fix prices, which was the norm under the former political system.
According to the general opinion of producers, lo...sses come from their defencelessness against buyers. The real situation is that price risk can be managed by suitable market strategy, and loss production can be avoided.
Hungary has a futures market (which is organized according to the CBOT system) in the grain sector, which is an unique institute in Europe. This organisation is suitable for hedge businesses and it has convenient technical and institutional background.
There are two possibilities to make hedge business. One of them is the short hedge with futures contract when the producer sells his product for long term if an acceptable profit is included in market price. In this case seller can protect himself against low market prices.
This technique can be considered as professional for price risk management, but possibly has financial cost because of the weak financial situation of Hungarian producers this solution seems expensive for them.
There is an other possibility in the Commodity Exchange for manage price risk, that is the option technique. This solution is suitable for insure prices as well, and has an other additional advantage, namely: there is no financial costs in this case.

Show full abstract
The effect of nickel-contamination, nitrogen-supply and liming on the chemical composition of perennial ryegrass (Lolium perenne L.)
Published October 10, 2008

Plant-production is determined by many production-factors. Each of these factors became subject of research-works through the years, still we state, that studying their interaction is even more important. For studying these interactions we set up a potexperiment, within that the direct effect and the interactions of four factors was inspected: ...soil, nitrogen-supply, nickel-loading and liming. Experiments were carried out on two soil types with extremely different characters: one was a chernozem soil with good fertility and buffering capacity, the other was a shifting sand soil with low humus-content and buffering capacity. Nitrogensupply and liming was added on two levels, while nickel on three within 12 combinations on each soil types. Plant production was cut two times within the vegetation period. The amount of production and dry matter was weighted, fractured and their element-content was measured by an ICP-detector.
Ca-content on the shifting sand soil was determined by all three factors, however the interaction between nickel-loading and liming was also significant. Nitrogen and liming increased Cauptake, that is due to appropriate nutrient-supply and improvement of a better pH-value. On the chernozem soil nitrogen and CaCO3 also increased the Ca-content. This is caused by a better nutrient supply and a higher amount of available Ca-ions.
On the shifting sand soil nickel content was increasing parallel to higher nitrogen-dosages. In presence of higher nickelamount the nickel-content of plants was also increasing, still according to liming, this increment was different. On the chernozem soil nitrogen a nickel increased Ni-uptake. However, liming also had a positive effect on Ni-content, that can be explained by the high amount on colloids in the soil, the adsorption of Ni-ions on them and in presence of liming material the replacement of Ca-and Ni-ions. 
The potassium-content on the shifting sand soil was different in each liming-combination. In combinations without nickel the potassium-content of limed and not limed combinations was on the same level. In not limed combinations by adding nickel potassiumcontent was increasing, while in limed combinations no change was observed. On the chernozem soil by adding liming material the amount of uptaken potassium was decreasing, that is due to the antagonism between Ca- and K-ions. 

Show full abstract
Environmental friendly maize (Zea mays L.) production on chernozem soil in Hungary
Published November 3, 2010

We have been studied the effects of crop-rotation, fertilization and irrigation on the yields of maize in different cropyears characterized
by different water supply (2007 year=dry; 2008 year=optimum) on chernozem soil. Our scientific results proved that in water stress
cropyear (2007) the maximum yields of maize were 4316 kg ha-1...up> (monoculture), 7706 kg ha-1 (biculture), 7998 kg ha-1 (triculture) in non
irrigated circumstances and 8586 kg ha-1, 10 970 kg ha-1, 10 679 kg ha-1 in irrigated treatment, respectively. In dry cropyear (2007) the
yield-surpluses of irrigation were 4270 kg ha-1 (mono), 3264 kg ha-1 (bi), 2681 kg ha-1 (tri), respectively. In optimum water supply cropyear
(2008) the maximum yields of maize were 13 729-13 787 (mono), 14 137-14 152 kg ha-1 (bi), 13 987-14 180 kg ha-1 (tri) so there was no
crop-rotation effect. In water stress cropyear (2007) fertilization caused yield depression in non irrigated treatment (control=2685 kg ha-1;
N240+PK=2487 kg ha-1). Our scientific results proved that the effects of abiotic stress could be strongly reduced by using the optimum crop
models in maize production. We obtained 8,6-11,0 t ha-1 maximum yields of maize in water stress cropyear and 13,7-14,2 t ha-1 in optimum
cropyear on chernozem soil with using appropriate agrotechnical elements.

Show full abstract
Comparative study of different soybean genotypes in irrigation technology
Published May 23, 2019

In many places in Hungary, early maturity soybean can be successfully grown. The earlier maturity group of soy which ripened in 110–125 days in most crop areas in Hungary. However, to achieve excellent results, the selection of proper varieties is important too. Successful cultivation is largely dependent on the macro and microclimate of the ...production area, the nutrient supply of the soil and the cultivation technology. Soybean can be produced in places where the amount of precipitation is right, as the lack of water results in lower yields and deteriorated oil and protein concentrations. In the following study, 2 years (2016 and 2017) are compared to the yield, protein and oil content of the soybeans of the early maturation group in irrigated and non-irrigated treatments. Based on our experiment, it can be stated that, during the irrigation of soybean, oil and protein content and yields did not always change.

Show full abstract
Study the correlation of morphological and production traits of honey bee (Apis mellifera L.) (Review
Published March 20, 2014

There are several morphological differences among the honey bee subspecies, which proofs that they adapted different way to the environmental factors of the given area. Morphological observations are not the only way to separate subspecies, it is possible on their genetic speciality as well. The authors’s aim in this present study was to exam...ine morphological characteristics of subspecies, furthermore looking for correlation between morphological parameters and honey yield. According to their results, among the most important parameters considered by Hungarian breeders, in the case of the native Apismelliferacarnica subspecies, the proboscis length could be the indirect tool for honey-productivity focused selection.

Show full abstract
Previous data on the relationship between the intensity of pruning and the degree of damage in integrated and organic applegrowing systems
Published May 27, 2001

In Hungary, fruit growers are increasingly interested in environmentally friendly growing methods, such as organic and integrated systems. Vital is the establishment of a strengthened system of cultivar-pruning-plant protection in production technology. Consequently, our aim was to examine the susceptibility of apple cultivars to diseases and p...ests and the effect of pruning technique on diseases and pests in organic and integrated growing systems.
Two pathogens (Venturia inaequalis, Podosphaera leucotricha) and two pests (Leucoptera malifoliella, Pannonychus ulmi) were observed in organic and integrated systems under „strong” and „weak” pruning techniques. Our results on six cultivars showed that the pathogens and pests infested the trees more in the organic system, as compared to that of integrated production. The pruning technique affected mainly the susceptible
cultivars to diseases and pests. The „weak” pruning technique caused a higher level of diseases and pests infestations than the „strong” pruning technique, especially in the organic growing system. The likely reason is that the shoots grow fast and powerfully under “strong” pruning technique. This supports better preservation of the trees supported by susceptibility of plant tissues to diseases and pests.

Show full abstract
Weed control possibilities of „energy willow” (Salix viminalis L.)
Published July 16, 2007

In Spring 2005, the owner of the Szalka-Pig Ltd. of Mateszalka, decided to import the willow species Salix viminalis L. and to create a plantation for energy production purposes on the humid arable lands in his ownership. In 2006, he enlarged this area by 43 hectares. The owner further decided not only to plant this species on the more adherent... (KA 70), but also onto the incoherent structured sand (KA 30-35). His main argument was that the cost of coal tar derivatives as energy sources was rapidly increasing in Hungary, so he needed to find a cheaper energy source for the drying of his products and for the heating of his buildings. He also planned to change his gas and oil heating equipment.
The willow’s cropping technology is being established in our country. One of our tasks is to work out an adequate weed control plan. The professional and safe use of herbicides can increase the success of production. In our paper, we discuss the data collected on treatments applied in the pre-emergent stage. The applied herbicide combinations (terbutilazin+S-metolaklór, mezotrion+ S-metolaklór, pendimetalin+S-metolaklór, oxyfluorfen+ S-metolaklór) yielded good results in large scale experiments.

Show full abstract
Regional economic achievements and reindustrialisation in Hajdú-Bihar county
Published July 24, 2014

The North Great Plain region is one of the backward regions of Hungary. The low level of economic development is mainly due to the lack of industrial development. The region is poor in natural resources, its main resources are land, natural gas fields, carbon dioxide, thermal water and the clay mineral stock.
The structure of GDP per capita ...of the county is different than the country average mainly because of the high proportion of agriculture.
The proportion of the industry and the building industry is not significant. Of the various service provider sectors, trade, transport and telecommunications have a small proportion, while financial and economic service providers have even lower share, which is due to the fact that these sectors are mostly concentrated in Budapest. The share of public and human service prodivers is higher than average due to the University of Debrecen.
The GDP which expresses the economic development of the county in a complex way increased four times its previous value in nominal value between 1995–2009. However, if the real value is considered, the increase is less than 25%, as opposed to the country average, which was less than 40%.
The most complex index of the development level of an economy is GDP expressed either in nominal or real value. If expressed in dollars, GDP is suitable for international comparison with the correction based on the purchasing power parity per person.
The county represents 4.3% of the people employed in the industrial sector in Hungary, while its share in industrial production is only 3.3% which is lower than the regional and population share of the county within Hungary. As regards industrial production per person, Hajdú-Bihar was the 10th county in Hungary; therefore, it is considered to be a less industrialised county.
The product structure of GDP is suitable for drawing useful development conclusions, but the result is more reliable if the income creation ability is also analysed on the basis of the employment structure.

Show full abstract
Realisation of customer focus from quality and forage safety aspects in the Hungarian mixed feed production
Published March 11, 2014

Customer focus is one of the main principles of Total Quality Management, and it is inevitable for long term, mutually successful vendorcustomer partnerships. The strictly controlled quality management systems of animal feed industry ensure that product quality meets the expectations of all parties involved and, indirectly the reliability of food raw materials. Meanwhile, the participants of agricultural production are variably quality conscious, so feed manufacturers support their supply chain and also their customers with professional background and they play a key role in safe food chains from farm to fork.

Show full abstract
Andrological examination of Hungarian Large White and Landrace boars
Published December 28, 2018

The Hungarian Large White and Hungarian Landrace pig breeds have outstanding lifetime performance, production parameters and crossbreeding ability. Nevertheless, during the recent decades, these breeds could not compete with the West European hybrid pigs concerning on production results. In this study, we made a complex andrological evaluation ...of boars in different Hungarian nucleus breeding stocks. After taking blood and semen samples, performing gonadotropin-releasing hormone (GnRH) challenge, ultrasonic and thermographic examinations were done. Laboratory tests were accomplished in reproduction labs of NARIC ABNMS. Our goal was to determine the reproductive performances of boars and collect samples for future genetic examinations, respectively.

Show full abstract
The effect of irrigation on the yield and quality of maize (Zea mays L.) hybrids
Published May 20, 2020

In this study, the effect of water supply on the quality and productivity of different maize hybrids was observed.

Maize production is influenced by many agro-technical factors such as nutrient supply, plant density, environmental factors, water supply and temperature. Good soil quality and adequate technology significantly... reduce the unfavourable effect of crop year. The impact of fertilization, crop rotation, irrigation and plant density on maize yield was greatly affected by crop year and crop rotation. The main constituent (69–75% dry matter concentration) of maize seed is starch, however, its increase can be achieved only to a limited extent, as increasing the starch content will reduce other parameters, especially protein content. Significant nutrient content improvements can be achieved by appropriate hybrid-site connection and the use of adequate technology. Protein content reduction with optimal water supply can be positively influenced by the appropriate nutrient supply for the hybrid.

The experiments were carried out at the Látókép Experimental Site of Crop Production on calcareous chernozem soil. The weather of the examined year, which was partly favorable for maize and partly unfavourable in other respects, was also reflected in the development of maize and yields achieved.

In 2019, we were examining the hybrids of Kamaria (FAO 370), P 9903 (FAO 390), DKC 4351 (FAO 370) and KWS Kamparis (FAO 350–400). Due to the dry soil condition, sowing was delayed, however, the hybrids emerged ideally because rain arrived soon after sowing, which facilitated initial development. Young plants evolved rapidly and dynamically in the case of all hybrids. In terms of heat-demanding bread, the month of May was unfavourable to temperatures below the annual average, but the higher amount rainfall helped the development. However, due to the drier period in early July, 25–25 mm of irrigation water was applied to half of the experimental areas on July 1 and 15.

The aim of our research was to determine the best population density for hybrids under favourable soil conditions (calcareous chernozem soil). In both irrigated and dry conditions, a crop density of 75,000 crops were the most favourable for the Kamaria hybrid. The P9903 hybrid in the case of a crop density of 85 crops proved to be ideal and the DKC4351 had an optimal population density of 95,000.

However, it should be taken into consideration that, in the case of soils with poor water management, the drought sensitivity of the crop stand may increase at a population density of 95,000.

As a result of irrigation, yield increased and the difference between the examined plant numbers decreased. The yield growth was relatively moderate (341 kg ha-1 – 1053 kg ha-1), which makes the economicalness of irrigation doubtful in the given year.

Show full abstract
Spatially Continuous GIS Analysis of Sampling Points Based on Yield and Quality Analysis of Sugar Beet (Beta vulgaris L.)
Published March 4, 2005

The homogeneity of a study area of 20x20 m used for beetroot production in North-West Hungary was analysed with geo-statistical methods on the basis of measured plant and soil parameters. Based on variogram calculations (Equation 1 and 2), the yield surface showed homogeneity in North-South direction. Considering the results, decrease of distance to 17 m can be suggested. The direction of the variability of yield (Figure 1) could be modelled with a direction variogram based on analysis of the variogram surface. In the study, developed methodological processes are presented for the analysis of spatial relationship between measured production and soil parameters. 5 spatial evaluation methods for yield surface were compared (Table 1). On the basis of the analysed methods, it can be stated that different methods (LP, RBF) should be used when the reasons for locally extreme yields are in focus than in case when the yield surface of the whole area is estimated (IDW, GP). Using adequate parameters the kriging method is applicable for both functions. Similarly to the results of an ordinary Pearson correlation analysis, spatial correlation analysis was shown using soil pH and Cu concentration data. The results of cross variogram analysis (Equation 2) and the North-South direction of the variogram surface showed negative correlation (Figure 3). Based on simulation calculations, decrease of 30% in sampling points resulted in increase of 12% in error for the total sample number considering Cu concentration. The method provides a tool to decrease the cost of sampling and sample analyses of spatially correlating features, and to increase the reliability of spatial estimation using a better sampling strategy with the same sample number.

Show full abstract
Spatially Discrete GIS Analysis of Sampling Points Based on Yield and Quality Analysis of Sugar Beet (Beta vulgaris L.)
Published March 4, 2006

Fulfilment of the increasing quality requirements of sugar beet production can be analysed with sampling of plants and soil at the cultivated area. Analyses of the spatial characteristics of samples require exact geodetic positioning. This is applied in practice using GPS in precision agriculture. The examinations were made in a sample area loc...ated in north-western Hungary with sugar beet test plant. According to the traditional sample taking procedure N=60 samples were taken in regular 20 x 20 m grid, where besides the plant micro and macro elements, the sugar industrial quality parameters (Equations 1-2) and the agro-chemical parameters of soils were analysed. Till now, to gain values of mean, weighted mean and standard variance values, geometric analogues used in geography were adapted, which correspond to the mean centre (Equation 3), the spatially weighted mean centre (Equation 4), the standard distance (Equation 5), and the standard distance circle values. Robust spatial statistical values provide abstractions, which can be visually estimated immediately, and applied to analyse several parameters in parallel or in time series (Figure 1). This interpretation technique considers the spatial position of each point to another individually (distance and direction), and the value of the plant and soil parameters. Mapping the sample area in GIS environment, the coordinates of the spatially weighted mean centre values of the measured plant and soil parameters correlated to the mean centre values showed a northwest direction. Exceptions were the total salt and calcium-carbonate contents, and the molybdenum concentration of the soil samples (Table 1). As a new visual analysis, the spatially weighted mean centre values of the parameters as eigenvectors were projected to the mean centre values as origin. To characterize the production yield, the raw and digested sugar contents of the sample area, the absolute rotation angles of the generated vectors were determined, which indicate numerically the inhomogenity of the area (Figure 2). The generated spatial analogues are applicable to characterise visually and quantitatively the spatial positions of sampling points and the measured parameters in a quick way. However, their disadvantage is that they do not provide information on the tightness and direction of the spatial correlation similarly to the original statistical parameters.

Show full abstract
Study of plant production modells with different intensity in winter wheat production
Published December 21, 2008

The effects of crop rotation, nutrient supply and plant protection technologies were examined on the yield of Mv PÁLMA winter wheat variety and on the most important diseases of ear and leaf. Our experiments were carried out on chernozem soil in the Hajdúság in 2006 and 2007, and three plant protection technologies (extensive, average, inten...sive) and three irrigation variations (without irrigation, irrigated with 50 mm, irrigated with
100 mm) were applied in different crop rotation systems. 
In the triculture crop rotation a higher rate of infection was observed than in the biculture crop rotation, because the vegetative growth was more expressed after pea and these microclimatic factors were favourable for the development of pathogens.
In the triculture crop rotation (pea – wheat – maize) the powdery mildew, DTR and leaf rust of wheat were present in both examined years (powdery mildew 5-15%, DTR 14-42%, leaf rust 8-37% in cropyear 2005/2006, powdery mildew 12-32%, DTR 9-29%, leaf rust 8-26% in cropyear 2006/2007). Fusaria could be observed in 2006 (depending on the plant protection technologies and nutrient supply in the biculture 7-27% and in the
triculture 5-19%). With higher amounts of fertilizers the rate of infection increased and reached its maximum at the highest dose of nutrient supply (N200 +PK).
We observed the highest rate of infection by ear and leaf diseases in the case of the extensive technology, while this rate could be considerably reduced by the application of the intensive technology.
Both in 2006 and 2007, yields were the highest at the N100-200+PK levels in the triculture after pea (6028-7939 kg ha-1 in cropyear 2006, 6578-8690 kg ha-1 in cropyear 2007 depending on plant protection technologies), and at the N150-200+PK levels in the biculture after maize (6096-7653 kg ha-1 in cropyear 2006, 4974-8123 kg ha-1 in cropyear 2007 depending on the plant protection technologies). The highest yield maximums were
reached when pea was the forecrop. The yields on the experimental plots of the intensive plant protection technology was 224-2198 kg ha-1 higher (depending on the forecrop) compared to the plots where the extensive technology was used.
The highest yield without irrigation was at the N150+PK both in biculture and triculture crop rotation. Among the irrigated variations Ö2 and Ö3 at N200+PK fertilisation resulted in the highest yield in the biculture crop rotation, while the N100+PK level in triculture system. In the biculture crop rotation the extra yield was 14-51% higher (575-1225 kg ha-1 depending on plant protection technology) when 50 mm water was irrigated, and
15-54% higher (778-2480 kg ha-1) if 100 mm irrigation was applied comparing to the non-irrigated versions. The yield was  7-17% higher (560-1086 kg ha-1) in the Ö2 irrigation variation, and 8-23% (691-1446 kg ha-1) higher in the Ö3 irrigation variation compared to Ö1 irrigation variation (non-irrigated).
A correlation analysis was made to reveal the connection between the yield, the amount of fertilizers, the rate of infection, the plant protection technologies and the forecrops. Strong positive correlation (0.846) was found between year and fusaria infection. Strong positive correlation was observed between fertilization and powdery mildew infection (0.525), fertilization and DTR (0.528), fertilization and yield quantity (0.683). Lower
correlation was found between fertilization and leaf rust infection (0.409), and forecrop and yield (0.472), recpectively. Negative correlation was calcutated between plant protection technologies and DTR (-0.611), and plant protection technologies and leaf rust (-0.649).

Show full abstract
Agronomic research in Martonvásár, aimed at promoting the efficiency of field crop production
Published November 13, 2012

The effect of crop production factors on the grain yield was analysed on the basis of three-factorial experiments laid out in a split-split-plot design. In the case of maize the studies were made as part of a long-term experiment set up in 1980 on chernozem soil with forest residues, well supplied with N and very well with PK. The effects of N levels in the main plots and four sowing dates in the subplots were compared in terms of the performance of four medium early hybrids (FAO 200). In the technological adaptation experiments carried out with durum wheat, the N supplies were moderate (2010) or good (2011), while the P and K supplies were good or very good in both years. Six N top-dressing treatments were applied in the main plots and five plant protection treatments in the subplots to test the responses of three varieties. 
The results were evaluated using analysis of variance, while correlations between the variables were detected using regression analysis.
The effect of the tested factors on the grain yield was significant in the three-factorial maize experiment despite the annual fluctuations, reflected in extremely variable environmental means. During the given period the effect of N fertilisation surpassed that of the sowing date and the genotype. Regression analysis on the N responses for various sowing dates showed that maize sown in the middle 10 days of April gave the highest yield, but the N rates required to achieve maximum values declined as sowing was delayed. 
In the very wet year, the yield of durum wheat was influenced to the greatest extent by the plant protection treatments, while N supplies and the choice of variety were of approximately the same importance.  In the favourable year the yielding ability was determined by topdressing and the importance of plant protection dropped to half,  while no  significant difference could be detected between the tested varieties. According to the results of regression analysis, the positive effect of plant protection could not be substituted by an increase in the N rate in either year. The achievement of higher yields was only possible by a joint intensification of plant protection and N fertilisation. Nevertheless, the use of more efficient chemicals led to a slightly, though not significantly, higher yield, with a lower N requirement. 

Show full abstract
The impact of sowing date, production area and nutrient supply on the yield and quality parameters of millet
Published March 11, 2014

The millet is a very special plant with good adaptation that gives the possibility for the late sowing and secondary production. However the effects of late sowing modifies to the efficiency of the agrotechnological elements. The examinations – focused on this aspect – was conducted in the DU CAS RINY in the small plots in four replications... in 2013. The largest effect was recorded in the sowing time of the examined factors (sowing time, nutrient supply, growing area). The effectiveness of the agrotechnological elements decreases under unfavourable circumstances caused by the late sowing. The examined factors did not affect in the protein content and milling rate, except in the latest sowing time when protein content was significantly the highest.

Show full abstract
The impact of cultivar and irrigation on yield, leaf surface temperature and SPAD readings of chili pepper
Published December 1, 2020

Paprika is an extremely popular and widespread plant species in Hungary. Chili peppers belongs to paprika and it can be consumed fresh or processed. The production of peppers began with the cultivation and control of some parameters for good results of paprika production. The aim of this article is to compare the water supply of four chili ...pepper hybrids ("Habanero", "Hetényi Parázs", "Unikal" and "Unijol") by means of investigation on open field and to examine how different temperatures and water stress factors influence the yield of chili peppers. The experiment area consisted of four different hybrids in three different irrigation treatments (control, deficit- and regular irrigation). The chlorophyll content was estimated with SPAD and the leaf surface temperature with Raytek MX4 TD. Our research concluded that deficit irrigation produced the highest yields for all cultivars and the lowest yields for the highest water supply.

Show full abstract
201 - 225 of 500 items
<< < 4 5 6 7 8 9 10 11 12 13 > >>