Search
Search Results
-
Nitrogen Content of Hungarian Soils and Nitrogen Fertilization
51-61Views:90For crop production and agricultural production, the most important natural resource is the soil that can optionally renew. Paralelly with this, soil plays a major role in the geological and biological cycle of elements. As a result of the big (geological) and small (biological) element cycles, the elements and combines neccessary for organisms can accumulate in the soil creating suitable living conditions for plants and other organisms. Soil is a heterogenous system both horizontally and vertically, and soil constituents show great variety in all the three dimensions, in addition, most of the parameters can also change between two examination dates. When talking about the factors influencing plant production, one should take into account this variation and heterogenity in time and space. When making fertilization recommendations, these factors should all be considered. In any consultation system, most of the mistakes and errors made are due to the unsatisfying soil testing and the negligence of soil heterogenity. In the practice of fertilization the biggest mistake is the improper soil sampling, then comes the methodical mistake of soil testing, which is followed by the inaccuracy of instrumental analysis and the subjectivity of result evaluation, but the latter two are negligible compared to the others. Under normal, i.e. production conditions, the quantity and distribution of nutrients in the soil are greatly dependent upon the applied technology, the amount and form of the applied natural and artificial fertilizers and the quality of fertilization.
Fertilization recommendations are needed because in the layer which is accessible for plant roots only a part of the nutrient content is available for plants in a specific production cycle. An illustration of this is that though the upper 1 m layer of an average chernozem soil contains more than 5000 kg N, 12000 kg K2O and 1500 kg P2O5 (form of expression mostly used in Hungary), the application of fertilizer doses which are just fractions of these quantities is essential. This is due to the fact that the available amount of the total nutrient content depends from the quality of soil, the environmental factors (the physical and chemical qualities of the soil) and the specific nutrient’s qualities (solubility, adsorption). Knowledge of these processes and the examination of the factors influencing the actual nutrient content are vital for working out a fertilization practice, which does not put more strain on the environment than neccessary.All of the above mentioned should be considered when applying inputs in the fields. In a well-functioning practice that considers the economic and environmental conditions (unfortunately the present production and economic conditions do not enable an appropriate level and degree), three nutrients are supplemented generally (and were supplemented in the last decades): nitrogen, phosphorus, potassium.
Studying the nutrient balance of the Hungarian field production’s last hundred years, we can draw some interesting conclusions.
The nutrient balance became positive for nitrogen and potassium in the second half of the 1960’s, while for phosphorus it was positive from the first half of the 1960’s and this period lasted until the end of the 1980’s.
Neither before the 1960’s, nor since the 1990’s has the amount of nutrients supplemented in a specific year reached the amount of the nutrient uptake of the same year. -
Influence of 17-alpha methyl testosterone on the production parameters of common carp (Cyprinus carpio L.) fry
37-43Views:221During our research we aimed at finding an answer as to what extent the different concentrations of 17-alpha methyl testosterone incorporated in the diet of common carp fries can influence the production parameters of the species, as well as how efficient their sexreversal can be with the use of this method. To this end, an aquarium experiment was conducted in the course of which four different hormone treatments were set and monitored. The fish feed was enriched with 17-alpha methyl testosterone in 50 ppm, 75 ppm, 100 ppm, 500 ppm dosages.
The obtained figures revealed that the hormone treatments had no influence on the production parameters and conservation of the common carp fries. Further on, our team is to determine the sex of the fish through the examination of gonads during autopsy when they reach the 500 g average weight.
Furthermore, a male specific test method which was supposed to be of great help in our attempt to select the sex-reversed specimens in the subsequent processes was also put to the trial. During the experiment the DNA-isolation of different sample types (muscle tissue, fin, mucus) of common carp with identified sex was successfully carried out. The extracted PCR product was examined with agarose gel. Our results indicated that the ccmf2 marker was applicable, however, the obtained figures were not reliable.
-
Results of Giltsrearing in Outdoor Production System
8-11Views:68The applied technology is an alternative approach to pigkeeping-systems. An outdoor pig production breeding sows are kept at pasture either year-round or in a certain period of the year. The important equipments of outdoor pig production are farrowing or grouping sows inhuts, which protect pigs against the effects of extreme weather, and electric fences, which surround and divide the pasture. Concentrate feed can be fed from the ground or from feeders which are made of steel or timber. One of main advantages of this pig keeping system is the total mobilizable keeping technology.
Within the scope of the study we are performing an experiment to make a comparison between coventional system and free range sows keeping technology. Pannonhybrid F1 gilts were used in this experiment, 28 gilts were kept on pasture all day and 28 gilts are kept in conventional, indoor system.
In this work the results of gilts-rearing are presentated as a part of our two-years experiment. -
Land use, water management
81-87Views:200Due to the prognosed population increase to 9.2 billion people by 2050, the world’s crop production does not have any other chance than to increase production. This demand is a huge challenge for agriculture. Based on the forecasts, the growth rate of production of the main cereals will decrease as a result of the effect of soil, water, the increasing fuel and fertiliser prices and the impacts of climate change. Methods ensuring sustainability have to be preferred. Precision agriculture is the most effective method of crop production. We have to apply minimum cultivation in order to protect the soil surface, maintain its moisture content and increase its water reception ability. In addition to the localised use of fertiliser, sowing seed, irrigation and pesticides, it is also important to apply them in a targeted way on the basis of plot imaging. The use of the new technology results in significant cost saving and it could also reduce environmental load.
-
Effects of the development of production factors on productivity
13-18Views:118In every economic sector, the enacted and expected quality of the products strongly affects its market entry and subsistence. The aim of management is success, competitiveness and subsistence that require adequate human and material resources and enough production stock. We must also notice that the quality of tools and instruments significantly influences work productivity. This applies to both plant production and animal husbandry.
The author researched milk production factors with methodical observation, document analysis and interviews. Data were collected with a ten-year interval, thus this assay can highlight the field, volume and sources of investments during this period and that the production stock increased in most farms and decreased in few. The data also shows the influence of investments on work productivity - there are differences between farms of equal size, so there are still ways of development.
-
Evaluation of Origin and Conformation of Excellent Cows with Long Productive Lives
13-17Views:74In the last few decades a new intensive milking stock has developed as a result of breed-converter crossing in Hungary. Beside this reproduction biology of the population was affected adversely by the keeping-, and feeding technology. Serviceable lifetime has shortened and service period has lenghtened. Whereas profitable milk production needs cows with longer productive life, larger life-time production. In our work we analysed the productivity-, and reputation parameters of the 200 highest lifetime-productivity cows of Hungary. We found that inheritance has not got important role in the serviceable lifetime. Adaptability and good constitution of Holstein-friesian is proved by the fact that cows with large life-time production are reared in large plants, some of them in large stocks, industrial environment. We found during the analysis of reputation parameters that these prominent cows mostly have deeper body, higher dairy form, higher rear udder, smaller foot angle. We found some weak connection between the milk production and the reputation. Loose correlations between useful material content and some linear traits were found.
-
The effect of production area on the development of yield producing factors of maize (Zea mays L.) hybrids of different genotypes
67-72Views:125Maize yield amount development is determined by the given crop year and the genotype of the applied hybrid, but beside these also by the applied agrotechnical factors, in particular by sowing technology. The development of yield amount and yield producing factors of five maize hybrids of different genotypes has been studied in a small-plot field experiment by the application of different row spacings and plant density variants. The production of the individual plants shows decreasing tendency parallel to the increasing plant density, however, this decrement is compensated by the higher number of plants per unit production area. Individual plant production is determined by the development of yield producing factors, such as the length and the diameter of cobs, just as by the thousand seed weight – that were studied in the present research work as well.
In the present research work the decreasing row spacing resulted in a yield increment of 0.67 t ha-1 (4.53%) in 2013, while in contrast in 2014 yield was decreased by 1.75 t ha-1 (14.87%). The high amount of precipitation in March was determinant in 2013: it filled up the soil water stock and balanced the negative effect of the inadequate amount and distribution of precipitation during the vegetation period for the yield. Lower extent of yield increment (0.6 t ha-1) was registered in 2014 in case of the row spacing of 76 cm than in the previous year. In case of a row spacing of 45 cm the difference between the two crop years was 3.1 t ha-1. The highest impact on the yield production factors was found in all treatment combinations in case of the applied hybrid among the three studied treatment factors. In the crop year of 2014 the effect of plant density on cob diameter and thousand seed weight could be revealed as well. In case of the cob diameter significant difference was found between the plant densities of 70 000 and 90 000 plants ha-1, just as between the populations with densities of 50 000 and 90 000 plants ha-1. In case of the thousand seed weight significant differences could be found by the application of plant densities of 70 000 and 90 000 plants ha-1. The highest values of the studied yield producing factors were measured in case of the plant densities of 50 000 and 70 000 plants ha-1; increasing the plant density to 90 000 plants ha-1 resulted in rather decreasing values.
-
Technological and Economic Analysis on the Hungarian Rice Sector
226-233Views:66Hungary lies on the northern edge of rice production area. According to this, the climatic conditions area not perfect for this species. The production area of rice involves typically the poorer quality soils, however these meet the requirements of rice. In Hungary exclusively domestic types are grown which have high yield and good quality and these are usually wore successful than foreign types. On the other hand, these Hungarian types should be improved considering safety in production. Nowadays, rice is grown in large scale companies with 300-1400 hectares, where production technology already exists, machinery is suitable, however the latter one a little bit old.
The average yields of the analysed companies were 3-4 t/ha in the past few years, which were a little bit above the national averages. The operating cost per hectare is almost 200 thousand HUF, from which the main part is the cost of machinery (35%) and the material cost (34%). The main part of the latter one is the irrigation costs (30%). The average cost, calculated from the total production cost, is 80 thousand HUF/t. Considering the above-mentioned costs and the price of rice (75 thousand HUF/t) it can be stated that the profitability of the rice sector is not the best, the cost rated profitability is -6.6%. According to the results of this analysis possibilities for the increase in profitability and improvement are increased subsidies and market price, as well as genetic improvement. -
Preliminary results on Siberian sterlet (Acipenser ruthenus marsiglii) fries rearing under intensive conditions
27-31Views:116In our experiments production performances of Siberian sterlet were tested under intensive tank conditions. During the 25 days long experiment effectiveness of weaning to artificial diet of the fish was investigated. Production performances of fish fed on exclusively dry diet from the beginnings were lower than the other two groups. Between the values of sterlets fed on live food also then suddenly vs. continuously were weaned to dry diet there were no significant differences. Based on our results live food feeding could be suggested for the Siberian sterlet larvae for some days but the method of the weaning to dry diet has no significant influence to the production performances.
In 21 days long experiment four different feeding frequencies were tested in Siberian sterlet (~13 g) fingerlings. Dry feed was offered for the fish continuously, 2, 3 and 4 times per day. There were no significant differences between the values of the four treatments. Based on our results there is no high influence of feeding frequency in case of this size group of Siberian sterlet.
During the nursing in two different size groups of Siberian sterlet the optimal daily amounts of feed were aimed to determine. In case of growth values of the group fed at 7% of the total biomass were higher than the other two groups (3 and 5%). Feeding performances of fish fed at 5% were significantly better than fish fed at 7%. Based on our results for ~20 g size of the subspecies at least 5% of total body weight could be suggested.
In case of ~150 g size of the fish the production performances of fish fed at 1% were lower than the other two groups (2 and 3%). Between the values of stocks fed at 2 and 3% there were no significant differences. Based on these results 2% of total body weight of dry feed could be suggested for the Siberian sterlet with ~150 g body weight.
-
Integration of Transformation Technology and Conventional Plant Breeding of Cereal Plants
75-80Views:65The integration of plant breeding and plant transformation is needed because we have to create a homozygous genotype of great agronomic value by conventional breeding before the application of genetic technology with which we modify it by using a gene or genome sequence. The aim of integrated plant breeding is to trigger such advantegous changes by genetic technology which can not be achieved via conventional breeding or just with considerably weaker efficacy. By transformation, the plant’s agronomic performance, the efficiency and security of its production will improve and it will enable more versatile uses of the plant. Genetic technology is one sequence of a new plant variety’ breeding. To create a transgenic variety, the isolation of a gene or a sequence of a gene from the donor genome for tranformation, a homozygous plant or target genome that is suitable for transformation and is created via conventional breeding methods, an effective transformation technique and the establishment of the new variety from the transformed, fertile plant are needed. The transgenic plant should be made suitable for establishing a variety by conventional breeding so that it could be produced securely, its growing could contribute to the development of modern, sustainable agriculture, its seed could be produced profitably, it could meet the reqiurements of DUS and that the changes indicated by the transgene could provide such economic advantages compared to the original variety, which have real commercial value.
-
Examinations of the carbon dioxide emission of the soil in the case of different tillage methods in a field experiment
209-212Views:206Today's global challenge is the increasing concentration of carbon dioxide (CO2) and other greenhouse gases in the air. The level of CO2 emissions may be significantly affected by the agriculture and, more specifically, the applied tillage method, even though to a lesser extent than industrial production. On a global scale, the CO2 emission of an agricultural area is insignificant in comparison to that of a large-scale plant in an area of the same size, but areas under cultivation, including arable land, have a large global area. In this paper, we investigated the relationship between applied soil tillage methods and carbon dioxide emissions in the case of different fertiliser treatments. In our experiment we examined four types of tillage with five different fertiliser effects. Comparing fertiliser treatments and tillage methods, it was found that their interaction significantly affected carbon dioxide emissions, the lowest value was obtained in the case of the 210 l ha-1 Nitrosol+N-LOCK – tillage radish treatment. Strip and tillage radish methods have relatively homogeneous, low value. -
Results of the sensory analysis of precision maize production
59-62Views:175This research was carried out in 2018, at the Látókép Experimental Station of the University of Debrecen in a moderately warm and dry production area, on deep humus layered medium-hard calcareous chernozem soil. In the scope of the research, the chlorophyll content of maize (Zea mays L.) was examined under field circumstances by means of local sensory measurements and we were looking for correlation between the obtained values and the amount of yield. Our measurements were carried out with Minolta SPAD-502 and GreenSeeker devices at 3 measurement times (4 leaf stage, 10 leaf stage and silking). It was found that phenological phases had an effect on the obtained SPAD and NDVI values and were in a slightly significant correlation with the yield. The most significant correlation was found between the results obtained during silking and the amount of yield. This may be because the least time has passed between the measurement time and harvest. Results obtained during the 10-leaf stage show excessive values in each case, which can be due to a measurement error. It was found that the phenological phase had an effect on the correlation of SPAD and NDVI values and the amount of yield. As the phenological phase progressed, the correlation between the measured results and yield has increased.
-
From Organic to Precision Farming (Contemporary Publication)
81-86Views:66The paper presents a short review of the different types of farming systems:
Biofarming, Organic farming, Alternatíve farming, Biodynamic farming, Low input sustainable agriculture (LISA)
Mid-tech farming, Sustainable agriculture, Soil conservation farming, No till farming, Environmentally sound, Environmentally friendly, Diversity farming
Crop production system, Integrated pest management (IPM), Integrated farming, High-tech farming
Site specific production (SSP), Site specific technology (SST), Spatial variable technology, Satellite farming.
Precision farming
It concludes that the various systems are applicable in different ratios and combinations depending on the natural and economic conditions.
The author predicts an increase in precision technologies , the first step being the construction of yield maps compared with soil maps and their agronomic analysis. Based on this information, it will be necessary to elaborate the variable technology within the field, especially for plant density, fertilization and weed control.
The changes in weed flora during the past fifty years based on 10.000 samples within the same fields using the weed cover method are presented. -
Effect of facility location on haulage efficiency
204-209Views:74In the 21st century, every economic sector must use the chances of evolution, technical and technological acquisitions, due to the level of competitiveness on the market. Such a sector as agriculture, where technology and the ideology of production are changing and adapting very slow to global expectations, by taking maximum advantage of opportunities, is a more central question. The greatest problems of Hungarian agriculture’s competitiveness are that this sector is very weak in capital and production costs make producers uncompetitive on the market. We can remedy this situation by using sources logically, purposefully and system approached. Logistics can provide the most useful assistance in such efforts.
In agricultural logistics, there is a great deal of uncovered territory. The aim is to transplant methods that are working correctly in other sectors into the agricultural sector, while maintaining development. One of the most important areas is transport logistics and material movement. Methods of analyzing and planning transportation and material movement found in professional literature do not take into account the specific needs of agricultural production. My aim is to examine the effect of facility location in the running of an enterprise. Through the results, I make suggestions for modifying the currently used logistic method and suggest further methods of examination. The effect of agro-specific needs must be examined in carrying out innovations and making logistical planning methods reliable. -
Possibilities of Growing Artichoke (Cynara scolymus L.) in Hungary
126-130Views:85The domestication of choice broadening, special vegetable species offers new market possibilities in Hungary. The production of artichokes has good perspectives due to its high protein, vitamin and mineral contents and its wide usability. According to the literature, in Hungary it is worth examining the annual production technology, which has yet to be researched in our country. The basic aim of our work was to establish the annual production of artichoke in Hungary with scientific research.
In the experiment, 5 Italian sorts (Valetta di Roma, Gobbo di Nizza, Violetto di Romagna, Violetto S. Francesino and Precoce di Romagna), 1 American sort (Green Globe) and 1 Egyptian sort (Balady) were used. For one half of the plants, we tried to bring on bud-production appearing in the first year only with early planting, while we used also a gibberellic acid hormone treatment for the other half.
Only the sort Green Globe had yields in appropriate quantity (21.4 t/ha) and quality. The low yield and inequable quality of buds of the Italian and Egyptian sorts refers to the fact that these sorts are not applicable for annual production in Hungary. Although the gibberellic acid treatment resulted an earlier harvest, increased the equality of buds and increased the proportion of stems producing buds except for the sort Green Globe, overall it did not have a positive effect. The hormone treatment fastened the physiological processes of the plants, thereby it induced early insenescence and lignifying of the buds. The high temperatures during the bud-formation period largely increased the ratio of flabby, over-blowing buds, so the planting must be timed in the future that the harvest period is in early automn or late spring, early summer months.
According to our results, globe artichoke can become a perspective culture by applying cold-resistant sorts with short growing seasons, which can be produced as annual crops without hormone treatment by the appropriate timing of bud-formation. -
The effect of NPK fertilization and the plant density on maize yield and bioethanol production
13-18Views:88For industrial (bioethanol) production of maize, a new production technology is needed. I tested and selected hybrids appropriate for this purpose and set up fertilization and plant density experiments. The experiment were set up on chernozem soil in 2008.
In bioethanol production, the selection of a high-yielding hybrid with high starch content, a slight reduction of N, increase of potassium, the application of the highest plant densities of the optimum interval, harvest at full maturity (when starch content is the highest compared to protein content) are of great importance. -
Sunflower in Romanian agriculture
153-163Views:190Romania is one of the largest producers of sunflower closely followed by Bulgaria, Hungary, France and Spain. The total sunflower production increased after 1990, due the increase of cultivated surface during the moderate yield average increasing rate. Last year, Romania was ranked first in the European Union (EU) for the area cultivated with sunflower and the total production of sunflower seeds, according to the National Statistics Institute (INS). Romania's position on the map of sunflower producers area is supported by about 1 million hectares sown. In the segment of sunflower productivity, Romania has an unfavourable position, situated in the last places in the classification of the EU's most productive agricultures. In order to increase production per hectare, it is required to perform measures aimed at the elements of sustainable cultivation technology, including the stability of the production level by ensuring phytosanitary protection.
-
What does precision crop production hold for the future of soil science and plant nutrition?
411-421Views:206The concept of precision agriculture is straightforward at the scientific level but even basic goals are blurred at the level of everyday practice in the Hungarian crop production despite the fact that several elements of the new technology have already been applied. The industrial and the service sectors offer many products and services to the farmers but crop producers do not get enough support to choose between different alternatives. Agricultural higher education must deliver this support directly to the farmers and via the released young graduates. The price of agricultural land must be higher if well-organized data underpin the production potential of the fields. Accumulated database is a form of capital. It must be owned by the farmers but in a data-driven economy its sharing will generate value for both farmers and the society as a whole.
We present a methodological approach in which simple models were applied to predict yield by using only those yield data which spatially coincide with the soil data and the remaining yield data and the models were used to test different sampling and interpolation approaches commonly applied in precision agriculture. Three strategies for composite sample collection and three interpolation methods were compared. Multiple regression models were developed to predict yields. R2 values were used to select among the applied methods.
-
Application of GIS, precision agriculture and unplugging cultivation in plant breeding of Karcag
49-56Views:151In the last two decades, the prevailing ecological conditions and climate change have caused negative effects. Therefore, a paradigm shift is needed in the field growing of plants. The latest inventions, digital technologies, precision cultivation are not enough, the mentality of the farmers is more important. For this reason, not only big financial sacrifices, but adequate receptivity are needed on behalf of farmers. Adequate skills and continuous self-education are necessary. The yield of plant growing farms is determined by ecological conditions to a 40% extent, genetic background of the seed has a 30% share and the applied agricultural technology has a proportion of 30%. In different agroecological conditions, bred varieties of plants have bigger tolerance to unfavorable factors of the regions and significant yield stability. Farmers, who buy and sow seeds, can only contribute to the genetic potential of the seeds with cultivation technology. Plant breeding provides stable genetic background and good quality seeds. Breeding activity – choosing variety proposants, breeding them, selection work, classical breeding process for 8-10 years – must create new landraces, which can produce balance, high yield and have good quality parameters in extreme ecological conditions, yearly excursion and have higher tolerance to unfavorable factors of the region giving significant production stability for farmers. In Karcag GIS technology, precision cultivation elements and soil-friendly agrotechnical methods have been introduced which largely support the aims of breeding and can also provide optimal cultivation conditions in extreme years. Because of the specificity of breeding the main aim is not only to increase yield but to provide harmonic growing for bred materials, to decrease the number and the cost of cultivation and to be punctual. In this study, applied new methods and technologies are introduced.
-
The effect of plant density to the yield results and the yield components of maize hybrids
89-93Views:133Maize is the crop that is produced on the second largest area in our country, in Hungary. It is planted on nearly 25% of the country’s growing area and it was produced on 1 090 439 hectares in 2016. Despite the continuous development of the biological basis and production
technology, the growth of the yield results is not constant, its fluctuation is significant. It can be even up to 60%, because of the extremity of the years. The exploitation of the yield potential of modern hybrids is possible if we harmonize the effects of the ecological factors and properly applied instruments of agro technology and by these we ensure their interaction to reach a favorable outcome. The applied plant density is an important, well researched, but at industrial level a not enough utilized element of the maize production.
The results of the extensive tests, done between 2009 and 2015, showed that the genotype, the year effect and the plant density are in strong correlation with each other determining the yield results. In the past seven years the examined genotypes reached the highest yield
performance at the highest plant densities. The early hybrids (RM90–95, FAO 200–300) are capable of producing them at higher plant density, while in case of the mid and late maturity varieties the further increasing of the density after reaching the optimum level led to yield depression.
According to our experimental results, the yield is in close positive correlation with the increase of the plant density. The effect of the growing season has great significance in forming the yield results and this determines the applicable plant density too.
The yield of maize is determined by a resultant of components. The main component is the number of ears per plant and the amount of kernels per ear, which is calculated from the number of kernels on an ear and the weight of them. The number of the kernels on an ear is
calculated from the number of rows on the cob multiplied by the number of seeds in one row on the cob. In dry years, at lower yield levels the yield decreases because of the shorter ears, while at the higher levels the number of kernels in a row and the thousand-kernel weight decreases,causing yield depression this way. From our examinations it turned out that the plant density reaction of a genotype is individual, every variety reaches its maximum kernel number per hectare – in other words the maximum yield - in an individual way. -
Topology in the fruit plantation
253-257Views:165The localization of fruit trees, the topology of the branch structure and the spatial structure of the canopy are important to plan sitespecific agro-ecological and production technology projects in an orchard. The currently used instruments and technologies – in the precision agriculture – give opportunities to obtain these informations. The examinations were carried out in the Study and Regional Research Farm of the University of Debrecen near Pallag with the use of a GreenSeeker 505 Hand Held™ Optical Sensor Unit, and its interface the Trimble AgGPS FmX Integrated Display board computer. The collected spectral data were completed with the 3D point cloud by Leica ScanStation C10 laser scanner. The laser impulse data and the vegetation index values were integrated in a unified 3D system. The integration of the two special data collection system provides new opportunities in the development of precision production technology system. The results could be directly used in phytotechnology, water management, plant protection and harvesting in orchards. Our elaborated method can supply digital high spatial accuracy guidance data for development of the automated machines, which could provide some new developmental way in the immediate future.
-
Comparative study of different soybean genotypes in irrigation technology
91-95Views:274In many places in Hungary, early maturity soybean can be successfully grown. The earlier maturity group of soy which ripened in 110–125 days in most crop areas in Hungary. However, to achieve excellent results, the selection of proper varieties is important too. Successful cultivation is largely dependent on the macro and microclimate of the production area, the nutrient supply of the soil and the cultivation technology. Soybean can be produced in places where the amount of precipitation is right, as the lack of water results in lower yields and deteriorated oil and protein concentrations. In the following study, 2 years (2016 and 2017) are compared to the yield, protein and oil content of the soybeans of the early maturation group in irrigated and non-irrigated treatments. Based on our experiment, it can be stated that, during the irrigation of soybean, oil and protein content and yields did not always change.
-
The effect of irrigation on the yield and quality of maize (Zea mays L.) hybrids
143-147Views:156In this study, the effect of water supply on the quality and productivity of different maize hybrids was observed.
Maize production is influenced by many agro-technical factors such as nutrient supply, plant density, environmental factors, water supply and temperature. Good soil quality and adequate technology significantly reduce the unfavourable effect of crop year. The impact of fertilization, crop rotation, irrigation and plant density on maize yield was greatly affected by crop year and crop rotation. The main constituent (69–75% dry matter concentration) of maize seed is starch, however, its increase can be achieved only to a limited extent, as increasing the starch content will reduce other parameters, especially protein content. Significant nutrient content improvements can be achieved by appropriate hybrid-site connection and the use of adequate technology. Protein content reduction with optimal water supply can be positively influenced by the appropriate nutrient supply for the hybrid.
The experiments were carried out at the Látókép Experimental Site of Crop Production on calcareous chernozem soil. The weather of the examined year, which was partly favorable for maize and partly unfavourable in other respects, was also reflected in the development of maize and yields achieved.
In 2019, we were examining the hybrids of Kamaria (FAO 370), P 9903 (FAO 390), DKC 4351 (FAO 370) and KWS Kamparis (FAO 350–400). Due to the dry soil condition, sowing was delayed, however, the hybrids emerged ideally because rain arrived soon after sowing, which facilitated initial development. Young plants evolved rapidly and dynamically in the case of all hybrids. In terms of heat-demanding bread, the month of May was unfavourable to temperatures below the annual average, but the higher amount rainfall helped the development. However, due to the drier period in early July, 25–25 mm of irrigation water was applied to half of the experimental areas on July 1 and 15.
The aim of our research was to determine the best population density for hybrids under favourable soil conditions (calcareous chernozem soil). In both irrigated and dry conditions, a crop density of 75,000 crops were the most favourable for the Kamaria hybrid. The P9903 hybrid in the case of a crop density of 85 crops proved to be ideal and the DKC4351 had an optimal population density of 95,000.
However, it should be taken into consideration that, in the case of soils with poor water management, the drought sensitivity of the crop stand may increase at a population density of 95,000.
As a result of irrigation, yield increased and the difference between the examined plant numbers decreased. The yield growth was relatively moderate (341 kg ha-1 – 1053 kg ha-1), which makes the economicalness of irrigation doubtful in the given year.
-
Potential use of bamboo in the phytoremediation in of heavy metals: A review
91-97Views:248There are many literature sources focusing on the phytoremediation of woody plants, but there are only few dealing with the phytoremediation of bamboo plants. Phytoremediation technology has the advantages of little disturbance to the environment and low remediation cost. Bamboo mainly exists in tropical and subtropical regions. As an energy plant, bamboo has a fast growth cycle, large biomass, simple cultivation, high economic efficiency, and convenient harvesting, which highlights the advantages of bamboo in phytoremediation. In addition, bamboo plants have good tolerance and uptake ability to heavy metals and have high application potential and development value in uptaking heavy metal contaminated soil. However, due to climate, temperature and other reasons, bamboo cannot be widely planted in most countries. Research status of remediation of heavy metal contaminated soil by bamboo plants is summarized. The feasibility of its application in heavy metal contaminated soil is discussed in this paper. Aiming at the shortcomings of existing research, bamboo plants have a prospect in the field of plant phytoremediation for the future.
-
Does the feeding frequency influence the growth performance of European perch juveniles (Perca fluviatilis) during intensive rearing?
123-128Views:120The European perch (Perca fluviatilis) is a predatory fish species. Its aquaculture production is increasing worldwide. Feeding and the frequency of feeding are important elements of intensive fish rearing. The aim of our experiment was to examine the optimal distribution of the amount of feed, at the same feed rations. The experiment lasted 42 days. Three treatments were applied in 4–4 replications. The first treatment was feeding twice per day (T2), the second treatment was feeding three times a day (T3), and the third group was fed four times a day (T4). 10 European perch juveniles were stocked per tank, with an individual mean body weight of 3.93 ± 0.06 g at the start of the experiment. The survival rate (S%) was above 90% for all treatments. The T2 treatments produced the most favourable harvest weight (13.96 ± 0.14 g) and specific growth rate (SGR = 3.08 ± 0.01% day-1), but no significant differences were observed between groups. In terms of feed conversion ratio, the best result was obtained by (T3) (FCR =1.06 ± 0.18 g g-1), but no significant difference was found for this indicator neither. The results of the trial indicate that the feeding frequency does not influence the production parameters.