Search
Search Results
-
Effects of Tillage Systems on Physical Status and Organic Matter Turnover of the Soil
42-45Views:154The cultivation technology for those plant, that play a key role in arable land production need to be renewed in order to reduce production costs and to protect arable land. The modernisation of technologies can only be achieved by applying appropriate tillage systems. Our measurements were carried out on chernozem soil with lime deposits at the Látókép Experimental Station of the Center for Agricultural Sciences, Debrecen University, in long term tillage experiments set up in 1989. We examined the typical physical parameters, the albedo, field capacity, the bulk density of the soil, organic carbon content (humus %) and the measured pH-values in the water solution within the two tillage variations. We have also modelled nitrogen cycle formation in different treatments.
A significant difference occured between the albedos of the two soils, which may be the result of significant amounts of stem remaining on the surface in the case of the reduced tillage method. The yellow, waxy stem of maize reflects 21% of the sun’s rays, especially at the beginning of the vegetation period, when its decomposition has only just started. This delys the warming up in early spring, which delays the sowing time of maize and reduces evaporation. In the two tillage variations, the water management characteristics do not differ practically, the wilting point field capacity are in accordance. In reduced tillage methods, the so-called „plough-pan” can be well measured at 15-20 cm, while in winter ploughing it is at 30 cm. The humus % of the soil does not differ in the two tillage variations, but due to the difference in bulk density this means a different humus and organic nitrogen content. The organic nitrogen content is greater in the reduced tillage method. On the basis of pH value evaluations, we could not detect significant differences in the two tillage variations. The organic nitrogen content of areas where reduced tillage method was applied is higher than in areas where conventional winter ploughing was applied. -
The effects of bioactive feed additives for the production parameters of common carp (Cyprinus carpio) fingerlings in intensive recirculating system
35-41Views:213For the appropriate quantity and quality of fish meat the pond farmers need to use up to date nutrition and feeding technologies. Recently the intensification of the carp production is stepping up with the availability the proper quality of the artificial feeds. The using of different feed additives make a better feed conservation ratio, faster growing rates and more uniform stocks.
In our experiment what is made with common carp (duration of the experiment was 8 weeks long) we compared two different kinds of feed additives in different doses. One of them contains only natural mineral elements and the other additive is a natural origin probiotics. Both additives were used in the quantity of 0.5, 1 and 2% of the total feed. By the result of the 8 weeks experiment it could be said, that the using of the humic acid based mineral elements feed additive. Makes a better FCR comparing with the control stock, but was not as good as the using of the probiotics. At the humic acid treatments the more doses, the better FCR value, but at the probiotics it wasn’t true. The 0.5% probiotic treatment gave the best result. It is concluded that the using of the probiotic feed additives always gave a better performance of the fishes (average weight, biomass, FCR) than the humic acid treatments. The using of the feed additives hasn’t got an influence for the survival rate of the carps.
-
Changing of some parameters of the soil-plant system as an effect of different composts
262-266Views:80Composting is an alternative way for practicing site-specific and environmental friendly plant nutrient supply. Our aim was to study the effect of different composts on plant and soil system.
Pot experiment with acidic sandy soil blended with three composts in five (0%, 5%, 10%, 25% and 50%) proportion was set up. Our experimental plant was perennial ryegrass (Lolium perenne L.). After the harvest of ryegrass we measured the fresh and dry weight of harvested plants, the P-, K-, Mg-contents, and the pH of soils.
The three composts had different effect on dry weight production and on nutrient-supply of soil. We established that one of the compost had significantly larger effect on the dry weight of ryegrass compared to the others. In this study we proved that favourable compost/soil proportion is different in the case of different composts. -
Examination of the impact of sowing technology models on the ear, constiuent and yield parameters of the yield formation elements of maize hybrids of different genotypes
17-23Views:109Production year 2012 has been characterised by climatic extremities. The weather of this year can be considered very contradictory in terms of maize production. The droughty conditions of the winter and spring months had a negative effect on both germination and starting vigour. The favourable weather of May-July created ideal conditions for intensive growth and generative processes; however the lack of precipitation in August and September had a damaging effect on the development of yield composing elements and grain saturation processes as well. Under such circumstances, the sowing date models caused significant differences in the yield and quality of the hybrids belonging to different growth periods. The growing period of the maize hybrids has been shortened as a result of the unfavourable climatic conditions.
Based on the trial results, it is verifiable that short growing period hybrids can be securely sown in draughty years even with a later sowing date, however using a later sowing date in the case of longer growth period hybrids may result even in a yield loss of 2–3 t ha-1. In the case of early and average sowing dates, with given yearly conditions the hybrids of the observed FAO 370-390 hybrid group provided the best result (12.40 t ha-1, 10.99 t ha-1), while in the case of the third, late sowing date the yield dominance of the FAO 290-350 hybrid group is the most significant (10.08 t ha-1).
The analysis of the yield composing elements found that the P9578 hybrid has the highest shelling ratio, while its cob is the shortest. The P9494 hybrid has a high yield and the highest thousand grain weight, while the DKC 4983 has the longest cob and its thousand grain weight is above 300 g.
The results confirm the fact that DKC 4590 has the highest yield potential and starch content, while in terms of oil and protein content the Szegedi 386 and NK Octet hybrids are the most important.
-
Analyses of a few physiological parameters of hybrid wheat in the case of different nitrogen supply levels
49-53Views:167The winter wheat is one of the most determinant crops because its role was always important in human’s life. To increase the average yield there are several possibilities, which are still not clear fields of agricultural plant production. Our main goal was to examine the responses of winter wheat genotypes to different amounts of nitrogen supplies. The sowing area of hybrid wheats are increasing, they may have different nutrient nitrogen utilization compared to varieties, and the question arose if it is possible to achieve same yield at lower nitrogen fertilizer application or not.
The present study analyzes the results of winter wheat (Triticum aestivum L.) from tillering growing stage. Under controlled conditions three different wheat hybrids were grown (Hywin, Hystar, Hybiza) with two different amounts of nitrogen supplies (optimal and the fourth part). The dry matter accumulation, relative chlorophyll content and nitrogen content were measured in order to draw conclusions from the different supplies of nitrogen for winter wheat genotypes and their physiological plasticity.
-
Complex assessment of inland water fish stocks
74-80Views:69In the domestic fish production, natural waters have yielded for several years about 7-8 thousand tons. This, from the point of view of outputs, considering the almost 130 thousand hectares of natural water, is rather low, it means approximately 55-60 kg/ha mixed fish.Although the various natural waters can differ significantly on the basis of yields, yet on the majority of the territories, the results were low. In the case of our extensive still waters and rivers, the reason can undoubtedly be found in the combined effect of the lack of the possibility of reproduction of the fish stock and the over-fishing. Fishery built on planning supposes the best possible knowledge in the given circum stances of the parameters of the water area and its fishstock. Lacking this knowledge, it is not possible to establish the optimal use fulness of the resources, what is more, the management can make faulty decisions – as a result of a lack of information -, which can risk the success of later activities.
It is known that many factors have an impact on the success of the fishery, as well as some information in connection with the water area and the fish stock are necessary, the knowledge of which make it possible to manage the fishery in a planned way. One part of the information is available, while the other part is incomplete or not deep enough. The necessary data are dissimilar depending on their nature, can be obtained from different places, by different methods.
As the first step for executing the field surveys and processing data, I developed a complex model, which contains in a unified system the steps of estimating the fishstock. I made the sampling on the basis of this. Part of the model is a fish faunistic survey, as well as a morphological survey of the water area. The information gained from these are important for making more accurate the system of devices of the samplings for stock estimation (duration, number of net-rows) and for assigning its place (places representing the best way the physical characteristics of the given water area). The major stages of stock-survey: A) faunistic survey, B) physical survey of the bed, and C) sampling with the help of gill-nets. This is followed by the evaluation by the computer module.
The results of the research create a methodological and technical background for the fish faunistic and population biologic surveys still performed in different ways in our country, and by applying these methods together, all basic information about natural waters which help decision-making concerning fisheries can be obtaine deffectively. -
Susceptibility of maize hybrids to corn smut diseas
39-42Views:142Corn smut disease is one of the most common maize diseases. In the previous years the disease lost from its importance, however nowadays it is becoming more and more important and widespread. The protection against it encounters great difficulties, therefore it is important to emphasize prevention and resistance based protection. The aim of the research was to investigate under laboratory circumstances the resistance of Hungary’s most commonly cultivated maize hybrids to corn smut disease. Twelve species were investigated. We distinguished two susceptibility groups within the hybrids based on the investigated parameters. The results are intended to assist the protection against corn smut disease and to make a suggestion for the farmers so that they could apply more environmental friendly and economical production.
-
Comparative analysis of certain soil microbiological characteristics of the carbon cycle
137-141Views:128In our researches, we examine the soil microbial parameters related to the carbon cycle. In this study, we compare the changes of microbial biomass carbon (MBC) and the soil CO2 production in soil samples which were taken in spring and autumn. The 30 years old long-term experiment of Debrecen-Látókép is continued in our experiments. The long-term fertilization experiment was set in 1983, and our sample was taken in spring 2014. The examinations of soil respiration processes and factors that influence soil respiration are required in optimal management. In our study, we interested to know how the growing levels of fertilization influence the soil respiration and microbial biomass carbon under non-irrigated and irrigated conditions in maize mono, bi, and triculture.
-
Study of plant physiological parameters in winter oilseed rape (Brassica napus var. napus f. biennis L.) production on chernozem soil
111-115Views:185We made plant physiology examinations in Arkaso winter oilseed rape hybrid substance: relative chlorophyll content (SPAD) and leaf area index (LAI) measurements. The experiment was set in University of Debrecen Agricultural Sciences Center at Látóképi Experimental Station in four replications, in two different sowing times (I. sowing date on 08/22/2014 and II. sowing date on 09/09/2014 sowing againhappened because of the incomplete germination in the second subtance 01/10/2014) Three different plant density 200, 350 and 500 thousand ha-1, under the same nutrient supply, 45 cm row spacing. The experiment was green crop of winter wheat. The relative chlorophyll content (SPAD) and leaf area index (LAI) measurements were made in seven different times. We measured the maximum value of chlorophyll content in the first sowing time at 500, and the second sowing time at 350 thousand ha-1 plant density. The measurement results proved that there was a linear relationship between the number of plants and the LAI. The maximum leaf area index values we measured in both the sowing time at 500 thousand ha-1 reached.
-
Pre-treatment of wastes containing keratin in industrial conditions
59-64Views:103The aim of the research was a development of a featherdegradation technology in industrial circumstances. During the experiments we determined the parameters of the critical environmental and technological limitation factors. Because of the high keratin-content the degradation (and composting) of the feather is difficult. With the developed technology huge mass of feather can be used fast and easily in biogas production and in the adjustment of the optimal element ratio of biomass. The industrial experiments were implemented in a 6m3 heatable double-walled
tank with stirring-shovels and aeration-system. The degradation process was followed with extinction measurements.
According to the experiments that were done the best results were given at the case which was heat-treated at 70°C, was injected with 1% bacteria concentration, and where 1:3 feather:water ratio was set if we consider the effectiveness of degradation and the hydraulical retention time. -
Examination of Possibilities for Increasing Sugar Content
202-206Views:33The result of sugar beet production is highly effected by the quality and the yield. Those agricultural techniques are very important which can be applied at low cost to improve these parameters. Such an opportunity is to increase sugar yield by foliar fertilization with nutrients and by treatment with bioactive fungicides.
In my small block trial I examined the effect of the magnesium and strobilurin active ingredients in different combinations and at different application times on the quality and the yield of sugar beet.
I found that there was a signifficant increase in sugar content on that blocks which were treated with a bioactive ingredient combined with magnesium in the middle of July and on those which were sprayed with bioactive ingredient in August. -
Effect of soil-compost proportion on the abiotic and biotic parameters of soilplant system
99-104Views:95The environmental awareness, coming to the front in the 21st century, motivates us to supply the plant nutrient demand (in point of the plant, the environment and the human health) with natural materials.
Composting is known since the beginning of civilization. We came to know more the processes of composting as a result of last decades’ research, but numerous unexplained questions remained up to this day. The good compost is dark gray or brown, and it should not create an odor. It has aggregate structure, and it’s pH is neutral. Compost is soil-like (Fehér, 2001), nutrient-rich material, which contains valuable nutrients extracted from soil, so if we recycle this, we can decrease the chemical fertilizer and other (example: mineral energy) expenses.
The reason of that we chose the more accurate cognition of compost utilization is to do more effective the site-specific nutrient supply. This increases the average yield and the quality of yield. Besides we can decrease the harmful effects, which endanger the plant, the environment, and the human body.
During the compost utilization experiment we blended the acid sandy soil with compost in 4 different volumetric proportions (5 treatments) than we set the pots randomized. The advantage of this method is that we can provide equal conditions for plants so we can measure the effect of treatments correctly. Our experimental plant was ryegrass (Lolium perenne L.), that grows rapidly, tolerates the glasshouse conditions, and indicates the effect of treatments well. After the harvest of ryegrass we measured the fresh and dry weight of harvested leaves and the total C-, N-, S-content of the dry matter and of the soil, we examined the pH and the salt concentration of soil as well.
Our aim was to study and evaluate the relations between the compost-soil proportion and the nutrient content of soil and plant. In our previous experiments we confirmed (based on variance analyses) that the compost has a beneficial effect on soil and increases the nutrient content of the soil (Szabó, 2009). But it’s important to appoint that the compound of compost is seasonally change: in winter the selective gathered municipal solid waste contains salt that were applied for non-skidding of roads, but salt has a negative effect to the plant. We proved that in our experiment the 25/75% compost/soil proportion was ideal for the plant. This content of compost effected 6 times higher green matter weight compared to the 100% sandy soil. -
Comparison of the physiological responses of an oil-pumpkin cultivar and hybrid under different nitrogen supply conditions
65-69Views:177Cucurbita pepo var. styriaca is known as a medicinal crop among other cucurbits. The benefits of cucurbits fruits are very important in terms of human health, purification of blood, removal of constipation, digestion and supplying energy. The mutant styrian oil-pumpkin (Cucurbita pepo L. convar. Pepo var. styriaca Greb.) exposes a complete lack of lignification of the seed testa. For this reason, this kind of naked pumpkin seed is more consumable as snack than other seeds. The vegetative growth of plants is crucial for fruit production. Nitrogen is the most imperative element for the proper vegetative growth and development of plants which significantly increases and enhances yield and its quality by playing a vital role in the biochemical and physiological functions of plants.
Field studies were conducted to study the effect of nitrogen nutrition on certain physiological parameters and their differences between the styrian oil pumpkin hybrid and cultivar (Gleisdorfi Classic cultivar and GL Rustical hybrid). The small block experiment was carried out based on a factorial experiment with a completely randomised block design and four replications in the Research Institute of Nyíregyháza during the summer period of 2017 and 2018. Three different concentrations of nitrogen fertiliser was applied at sowing. Photosynthetic pigments (chlorophyll-a, -b and carotenoids) were analysed as one of the basic factor of efficient photosynthesis. The yields of two genotypes were also measured in all treatments as seed-weight. The contents of photosynthetic pigments were higher in the oil-pumpkin hybrid, mainly the carotenoids in 2018. The vegetation period of 2018 was drier than in 2017, the hybrid oil-pupmkin was more efficient in stress tolerance than the cultivar with higher carotenoids pool. The obtained yield was more pronounced in the oil-pumpkin hybrid than the cultivar in all examined years. The hybrid GL Rustical was more sensitive to nitrogen treatment than the cultivar Gleisdorfi Classic.
-
Flesh firmness examination of scab-resistant apple varieties in a storage experiment
93-98Views:119Of the different physical characteristics of fruits, one of the most essential qualities is flesh firmness, as is an important parameter when selling fresh apples, processing the fruit (processing industry) and during its storage. In the scope of our research, we examined five apple varieties originating from the Derecske horticultural site of KITE cPlc. in 2016. The plantation was planted to be suitable for intensive apple production. Samples were collected at the time of maturity (August-October) of the given variety. The five examined apple varieties (Gaia, Isaaq, Modí, Smeralda and Fujion) are all resistant to apple scab (fungal disease caused by Venturia inaequalis). The two-month storage experiment was conducted at 16-17 °C, which had an aggressive effect on our stored apples. Flesh firmness, weight and diameter were measured on three dates for each of the five apple varieties. Our results were evaluated using IBM SPSS Statistics 20 software. We aimed to compare flesh firmness, weight and diameter of the five apple varieties and their changes during storage. Isaaq (86.34 N/cm2), Modí (94.06 N/cm2) and Fujion (84.90 N/cm2) had outstanding initial flesh firmness results. The Modí apple variety provided the best storage parameters.
-
Contexts between apple orchards with various cultivar comparisons and the effect of ATS (ammoniumthiosulphate) on fruit thinning
35-38Views:139Our research focuses on a fruit thinning material that can also be used in apple production. This material reduces significantly the required manual labor of hand thinning by russeting the blossoms selectively. The ATS (ammonium-thiosulphate) acts as chemical desiccant contrary to the nowadays commonly used materials such as naphthalene acetic acid, naphthyl acetamide, benziladenin and ethylene, which affect the metabolic processes of the plant by regulating the hormone system. In our experimentals cultivar ’Pinova’ and ’Golden Reinders’ were treated with different concentrations of ATS. The effect of these doses on the fruit setting and the quality and quantity parameters of the fruits was studied. According to our results, in the case of cultivar ’Pinova’ the ATS did not have any detected effects at the concentration of 1.5%. Application of ATS at 3% decreased considerably the fruit setting and fruit yield, accordingly the mean fruit size improved. The response to treatment in the case cultivar ‘Golden Reinders’ does not have any similar consistent results.
-
Product orientated sewage sludge composting technologies in the practice of AKSD Ltd.
33-36Views:102In recent years the regulations of the EU unambiguously determine that the biodegradable wastes should be used for biogas production or composting. The direct use of sewage sludge in agriculture is limited by its hazardous microelement content, but it can be used effectively in composting. The limitation parameters can be extinguished with correct compost-mixture and technology variants. The exact determination of the technologies and mixtures result a stable, constant quality product. The compost, as a classified product, is friable structured. The end-product is a
homogeneous mould with good water capacity, does not contain any weed seeds and pathogenic organisms. The compost does not have a acidify effect on the soil. It is an effective fertilizer thanks to its macro and microelement content. -
Morpometric study of Hungarian honey bee (Apis mellifera L.) colonies
59-63Views:237The honey bees are essential for the pollination of agricultural plants. The Pannonian honey bee, Apis mellifera pannonica, is native to Hungary, only these subspecies are being bread in our country. The parameters have been separated the pannon and italian honey bee subspecies, the colour of tergit, the cubital index and proboscis length. The morphometric analisys is of special importance because this, on the one hand, shows correlation with honey bee production and on the other hand, the pure morphometric charactersitics is the basis of any potential honey bee export. Mitochondrial DNA and microsatellites are the common methods to define genetic diversity and the separation of subspecies.
-
The effect Benefit PZ biostimulant on the fruit size and yield production of apricot varieties (Prunus Armeniaca)
16-18Views:87Fruit size is determined by the genetic makings of varieties the pomology and enviromental factors. The climate and the previous year’s harvested yield have a great effect on yield volume. It is not easy to harmonize the qualitative and quantitave parameters of the fruit. High yield usually causes smaller fruits.
The aim of our trials was to evalaute the effect of Benefit PZ biostimulant on fruit size. We examined two apricot varieties (Bergeron, Magyarkajszi C235) for the efficacy of the product. The three applications were made with 400 l/ha water with 2500 ppm. The optimal interval of application with Benefit PZ is during in the early phases of development. The size of the final fruits depends on the number of cells making up the fruits. The later application could not increase fruit size growth, there are no significant differences between the Benefit PZ sprayed and the control plots. The totally harvested fruit weight was 13.5% more on the trees of cv. Bergeron, it was caused by the higher fruit set. On the sprayed trees were 12.2% more fruit. Therefore were no differences between the average fruit weight. Fruit weights of the treated trees were 44.37 g on cv. Bergeron, 44.15 g on cv. Magyarkajszi C235 and on the no treated trees were 43.83 g as well as 45.33 g. -
Analysis of the efficiency of higher education systems
207-214Views:74The aim of the higher education reform process both in Hungary and in the European countries is establishing a competitive, qualitative higher education. The Education Minister of our country regularly emphasizes in his statements that the quantitative changes of he past 15 years are completed, from now the emphasis must be on quality :„a degree in itself is not sufficient, the actual knowledge behind is necessary”. To achieve
this aim, the government carried out several changes in the field of higher education in the past years, one of them was implementing a budget support system in accordance with the performance of the institutions. The objective of the three year long support agreement between the state and the higher education institutions is considering quality parameters and outputs beside and instead of normative (input-based) support. The other occurent and debated issue is the introduction of tuition fees. Although this plan was rejected by the national referendum on 9th March, 2008, some weeks ago an amendment bill was passed, which would mean bringing tuition fees back in the system.
In my paper I am examining whether the efficiency of higher education systems are influenced by the extent of the contribution of the state and the private sector to their expenses. Furthermore I’d like to find the answer to the following question: Does it matter what principles and mechanisms play role by the distribution of the state support between the institutions of higher education. -
Correlation between cultivation methods and quality in some vegetable species
313-317Views:111Quality parameters of 5 table root varieties were tested on 3 sowing dates with different cultivation methods: open field on 15 April and 9 July 2010 and under plastic tents on 19 August. The highest red pigment content (betanin) was measured in the varieties Akela and Mona Lisa (~ 80 mg 100 g-1) of the second (July) crop. This crop is in general use in Hungary. In comparison, in the late sown varieties (August, under plastics) a further pigment increase (10–20 mg 100 g-1) was observed in the same varieties as related to the earlier sowing dates. Yellow pigments (vulgaxanthins) showed similar trends. Roots of the late sowing date (with harvest in December) contained the highest vulgaxanthin values (103.3–124.18 mg kg-1).
Varieties reacted differently to temperature changes during the production period and thus to sugar accumulation. In the second crop (July) higher water soluble solids content was measured on the average of varieties (10.12%) in comparison to the April sowing (7.76%). Beetroots of the spring sowing are recommended for fresh market while the second (July) crop with autumn harvest can satisfy industry requirements. Late sowing under unheated plastic tents supply us with fresh beetroot in late autumn and early winter and prolong the usability of plastic tents.
Six lettuce species/subspecies were tested in the open field and under plastic tents in 3 repetitions for nitrate nitrogen, vitamin-C, polyphenol (gallus acid equivalent – mg GAE 100 g-1) and mineral element (Ca, K, Mg, Na) contents. Our measurements showed lower nitrate nitrogen values under plastic than in the open field (89.10± 8.13 and 127.06±14.29 mg kg-1) on the average of genotypes. Lettuce grown in the field had higher vitamin-C content (1.4 mg%) which is nearly 50% more than in plants under plastic. The highest polyphenol content was found in samples from the field with a conspicuous value of 804.17±56.47 mg GAE 100 g-1 in Piros cikória. Samples grown under plastic were richer in mineral elements (Ca, K, Mg, Na) which can be explained by the higher nutrient content of the soil. In this environment superior Mg content was observed in Edivia (4616.33±
311.21 mg kg-1).Besides the well- known headed lettuce, Piros cikória (Red chicory),the red leaved Lollo Rossa and Tölgylevel (Oak leaf lettuce) should be
mentioned which well deserve further testing in order to supply us with nourishing, healthy food. -
Application of GIS, precision agriculture and unplugging cultivation in plant breeding of Karcag
49-56Views:151In the last two decades, the prevailing ecological conditions and climate change have caused negative effects. Therefore, a paradigm shift is needed in the field growing of plants. The latest inventions, digital technologies, precision cultivation are not enough, the mentality of the farmers is more important. For this reason, not only big financial sacrifices, but adequate receptivity are needed on behalf of farmers. Adequate skills and continuous self-education are necessary. The yield of plant growing farms is determined by ecological conditions to a 40% extent, genetic background of the seed has a 30% share and the applied agricultural technology has a proportion of 30%. In different agroecological conditions, bred varieties of plants have bigger tolerance to unfavorable factors of the regions and significant yield stability. Farmers, who buy and sow seeds, can only contribute to the genetic potential of the seeds with cultivation technology. Plant breeding provides stable genetic background and good quality seeds. Breeding activity – choosing variety proposants, breeding them, selection work, classical breeding process for 8-10 years – must create new landraces, which can produce balance, high yield and have good quality parameters in extreme ecological conditions, yearly excursion and have higher tolerance to unfavorable factors of the region giving significant production stability for farmers. In Karcag GIS technology, precision cultivation elements and soil-friendly agrotechnical methods have been introduced which largely support the aims of breeding and can also provide optimal cultivation conditions in extreme years. Because of the specificity of breeding the main aim is not only to increase yield but to provide harmonic growing for bred materials, to decrease the number and the cost of cultivation and to be punctual. In this study, applied new methods and technologies are introduced.
-
Decreasing Energy and Water Use in the Meat Industry
24-28Views:61The technology supervisions are needed from time to time in order to involve the new research results, experience, new technologies and equipments organising principles into the production and to make it cheaper and with less expenditure to increase the profitability and competitiveness. In the course of our investigation we aimed the analysis of the traditional technologies and improving of it. In this article we detail the heat treatment curing process. We applied the principles of experimental design for the determination the main influencing parameters in the processes. Then we made simulations and modelling in seeking for the environmentally better technology programs. We developed a method for measuring the temperature development of products with small diameter using the similarity theory in unit operation. In the course of the analysis of the heat treatment processes we could state that the heat treatment time can be reduced significantly by decreasing the size of the product and choosing the right ratios among the surface heat transfer intensity, ambient temperature and involving the lethality obtained during the cooling phase. The total sparing were about 10-20%. We solved the problem associated with the sensor placement error using a plastic material (metamid). We establish a curve between the real product temperature and plastic rod temperature by which the monitoring of the process became more accurate. We determine the size modification for different product sizes. In case of curing we observed very similar phenomena. For the determination of the diffusion coefficient we adopted the Ball-method not using in this field till today. We could reduce the excess saltiness and loss of NaCl with about 5%.
-
Examination of the usability of the MALDI-TOF method in sunflower genetic identity analyses
33-38Views:147Economically, one of our most important crop is the sunflower. Regarding its production it is essential to use top quality seeds. As the conditions of seed certification and the certification parameters are regulated by laws and ordinances, it is highly important to farmers and seed producers to detect seeds of low quality or dubious origins.
Nowadays, the examination of the cultivar homogenity of sunflower is based on a reference method of the International Seed Testing Association Rules International (ISTA), Chapter 8. This standard reference method uses ultrathin poliakrilamid isoelectric focusing gel electrophoresis (IEF-UTL, or simply IEF). With this work we have set out to compare the results of MALDI-TOF to the test results – used as reference results – achieved by this reference method. The aim is to develop a new, quick, cheap and reliable method. In this article I summarized the results of some of the experiments that will provide basis for my further work.
During our previous experiments we have concluded that out of four extracting agents we can get the most protein markers using NaCl acid buffer, 1 propanol buffer. -
Önitatók konstrukciós és hidromechanikai vizsgálata
52-57Views:99Our research aimed to examine Hungarian automatic drinking system constructions and hydromechanics under laboratory conditions and in operation with special emphasison the small volume, valve types.
Considering that no Hungarian standard of automatic drinking system examination and qualification exists, on the basis of technical literature, the new examination method of automatic drinking systems has been elaborated.
For laboratory measurements, a universal measuring bench was assembled which is applicable to the hydromechanic testing of all automatic drinking systems (cattle, sheep, pig).
Summary of the laboratory measurements:
Upon comparison of the flow capacity of the valves, in the case of same opening values (h/dn), the rubber spring valve of SZI type automatic fountain has the highest flow capacity, although in the case of 100 kPa pressure even this type has only 15-16 l/min value which hardly surpasses the lower limit of the desired 15-25 l/min range.
The loss coefficients of the valves, on investigating in the range 100-200 kPa, showed the lowest value (2,2-5,8) with the steel spring self drinking device.
Summary of the operational investigations:
In the long term operational investigations, the rubber stripped valve and the rubber spring automatic fountains had the most favourable operational reliability values: K4=0,98 and K4=0,94, respectively.
From the aspect of animal operation of the valves, all the Hungarian types are frontal operated, thus such system automatic valve drinking devices can be used only in long and moderately long stands, directed toward the animal.
On the basis of hydromechanical and construction examinations of the Hungarian tied cattle production technology the construction modification of the rubber spring valve of SZI type automatic drinking fountain, which is the most frequantly used in this country, was carried out. Due to design modifications the valve parameters improved significantly.
The goals of the accomplished valve modification were
ζ'sz – loss coefficient to be reduced
q – flow capacity to be increased -
Conceptional Model of Regional Agricultural Water Management System
199-209Views:91Our study focuses on the water management improvement of the Hajdúsági-löszhát (loess ridge). The Hajdúsági-löszhát (loess ridge) is an intensive agricultural area. At the same time, the problem of increasing water demand is still not solved, so towards of safety production irrigation should be improved. To realise this should be known not even agricultural water demands but industrial and urban ones as well, thus a complex water management system is required to be worked out.
In the first part of the research, the water demand in the area is mapped, then a conceptional model of the Hajdúsági-löszhát’s (loess ridge’s) water management system is created. After collecting data the water management scenario is summarized in a real time model splitted into five periods.
During the research, the instruments of spatial informatics (GIS) are used to get acquainted with the variation of the hydrological parameters in space and time. To understand and simulate the different decision making processes and to choose the right decision alternative, a decision support system is created with the use of spatial informatics data.
In addition, considering the potentially right decision alternative, irrigation will be started in practice, an effect and after-effect inquiry will be made, and the results will be analysed, evaluated and summarized. Finally, a suggestion to the most adequate irrigation technology will be made.