Search



Show Advanced search options Hide Advanced search options
Development of maize production technology that increase the efficiency of bioethanol production
Published November 2, 2009
17-26

Maize is one of the most important crops worldwide and also in Hungary, it can be utilized for multiple purposes: as a feedingstuff, for human nutrition and for industrial processing. In the last decades, the per ha yield of maize varied greatly in Hungary, between 2004 and 2006, it was 6.82-7.56 t/ha, while in 2007, it was only 3.6 t/ha. Resul...ting from this, the price of maize became 2-2.5 times higher. The high price hinders bioethanol production. The largest per ton amount of bioethanol, 387 l, can be produced from maize.
In addition to its classical utilization as feed and food, the industrial use (especially for bioethanol production) of maize is increasin.
For industrial production, a new production technology is needed. I tested and selected hybrids appropriate for this purpose and set up fertilization and plant density experiments. The experiment were set up on chernozem soil in 2007.
The applied fertilization treatment was N 120, P2O5 80 uniformly, and five different dosages of potassium: K2O 0, K2O 100 (KCl), K2O 100 (Kornkáli), K2O 200 (KCl), K2O 200 (Kornkáli) kg/ha active ingredient. The applied plant densities were 40, 50, 60, 70, 80, 90 thousand plants/ha.
The yield of maize hybrids in the fertilization experiment ranged between 10.53 – 14.62 t/ha. Both regarding the form and dosage, 100 kg/ha Kornkáli proved to be the best potassium treatment. Regarding the inner content parameters, the highest starch content in the average of treatments was obtained for the hybrid PR36K67: 73.57%, and its yield was also the highest, so this hybrid proved to be the most suitable for bioethanol production. The highest protein content was observed for the hybrids KWS 353 (12.13%), which can be favourable for feeding purposes.
Most of the hybrids gave the highest yield at 80 thousand plants/ha plant density, however, hybrids PR36K67 and Mv Tarján achieved the highest yield at 90 thousand plants/ha.
In bioethanol production, the selection of a high-yielding hybrid with high starch content, a slight reduction of N, increase of potassium, the application of the highest plant densities of the optimum interval, harvest at full maturity (when starch content is the highest compared to protein content) are of great importance. 

Show full abstract
28
38
Examination of Hybrid-specific nutrient supply at corn on chernozem soli
Published July 31, 2012
91-95

The effect of increasing fertilizer dosages on the yield of eight different maize hybrids (SY Ondina, NK Kansas, NK Lucius, NK Octet, NK Thermo, SY Flovita, SY Brillio, NX 47279) has been investigated in the crop-year of 2011. According to our results it can be stated that contrarily to the control treatment the application of different nutrien...t-levels has resulted a significant yield increment (2 000–5 800 kg ha-1).
Based upon the results of this experiment we have drawn the conclusion that the nutrient level of 120 kg N+PK was the optimal for the investigated hybrids. The highest yield (14 475 kg ha-1–15 963 kg ha-1) of the hybrids with different genotypes has been produced in case of this fertilizer treatment. With the comparison of the control and the optimum-fertilizer treatments the yield-increasing effect of mineral fertilization and the different reaction of hybrids towards increasing fertilizer dosages have been proven. In case of the control treatments the best-yielding hybrids were NK Thermo (11 917 kg ha-1) and NX 47279 (11 617 kg ha-1). Contrarily on the optimal nutrient supply level the hybrids SY Brillio (15 876 kg ha-1) and NX 47279 (15 963 kg ha-1) have produced the highest yields. Summarizing, we can state that the hybrid NX 47279 has resulted stable and high yields in the fertilized treatments. Analysing the yield-increasing effect of 1 kg fertilizer active substance it was proven, that the hybrids SY Flovita (45.43 kg ha-1), SY Brillio (44.47 kg ha-1) and NX 47279 (42.33 kg ha-1) had a good reaction towards even lower nutrient supply levels as well. In case of the control treatment the average water utilization coefficient of the hybrids was significantly lower (35.2 kg mm-1), than in case of the optimal nutrient supply level (N120+PK) treatments (48.9 kg mm-1).
Therefore the hybrid specific difference between the water utilization of genotypes could be revealed.

Show full abstract
54
54
Examination of drought stress of two genotype maize hybrids with different fertilization
Published May 20, 2020
53-57

In the growing season of 2019, we analysed stress resulting from climatic factors on maize hybrids of different genotypes, with the aim of gaining a better understanding of the physiological responses of each hybrid, which might support the elaboration of a cost-effective irrigation plan.

Our experiments were carried out at... the Látókép Experimental Station of the University of Debrecen on calcareous chernozem soil in a small-plot long-term field trial with strip plot design. In the scope of the experiment, N-fertilizer doses were applied as basic fertilizer and top-dressing in addition to the non-fertilized (control) treatment. The 60 and 120 kg N/ha doses applied as basic fertilizers in the spring were followed by top-dressing in the V6 phenophase with a +30 kg N/ha dose. Measurements were carried out with the involvement of the Renfor early (FAO 320) and Fornad (FAO 420) late maturity hybrids-

The stomata of the plants became more and more closed with the progression of the phenological phases; their stomatal conductance decreased. However, the hybrids responded differently to environmental stress. In the case of the Renfor hybrid, the highest conductance (669 mmol/m2-s) was recorded in the V12 phenophase with the 150 kg N/ha treatment. The stomata were more open due to the high turgor pressure, allowing plants to evaporate properly. The plant was in its worst physiological condition on 2nd July, at the time of the appearance of the last leaf in the case of the 120 kg N dose (224 mmol/m2-s). The value measured in the V12 phenophase has already shown that the stomata were closing due to the self-regulating system of the plant. It would have been necessary to dispense irrigation water following the measurement. This confirms the finding that water stress can be prevented by measuring stomatal conductance.

In the case of the Fornad hybrid, stomatal conductance was the highest on 12th June (630 mmol/m2-s) in the 90 kg N/ha treatment and it was the lowest (183 mmol/m2-s) in VT (emergence of the last leaf) phenophase in the 60 kg N/ha treatment. In this case, the appropriate time for applying irrigation water would have been early July, when the conditions for the plants were still adequate. Subsequently, the stomata began to close due to a reduction of the water resources available to them.

There was a significant correlation between soil moisture and stomatal conductance, as well as between temperature and stomatal conductance.

Show full abstract
49
59
The role of the hybrid-specific technological recommendations of maize in precision crop production procedures
Published November 13, 2012
297-302

The necessity of application of hybrid specific crop production technology has been confirmed not only by trial results but also by the experiences gained from the agricultural practice. For this reason it is essential to test and collect data in field trials about the specific agronomic traits of the corn hybrids belonging to different maturit...y groups and genotypes. Corn hybrids are tested for their responses to sowing time, plant density and fertilizer supply; sensitivity to herbicides; and lately, the resistance to the damages caused by the larvae of corn root worm. Last but not least, mention should be made of the differences in the responses of the corn hybrids to the damages caused by drought stress. Based on the trial results, suggestions for the hybrid specific corn production are compiled and made public for the experts and farmers engaged in corn growing. Corn hybrids may deliver maximum yields on the impact of specific crop production technology only in case if it relies on carefully done general production technology including soil cultivation, seed bed preparation and weed control. Similarly, precision crop production technology may advance the yield increase in economic way if it is constantly drawing on the source of research results.

Show full abstract
41
55
Technological development of sustainable maize production
Published May 16, 2017
83-88

In our research we examined the effect of the hybrid, the nutrient supply, the number of plants and the abiotic factors (temperature, amount of precipitation) on the yield, crop quality and yield stability of maize. We devoted special attention to the natural nutrient utilization ability and fertilizer reaction of maize.
The experiment took ...place in Hajdúszoboszló on chernozem soil, on a nearly eight ha field. The size of one plot was 206 m2, this it was a half-industrial experiment. We tested six hybrids with different genetic characteristics and growing seasons. I analysed the correlation between the nutrient supply and the yield of maize hybrids with control treatment (treatment without fertilization) and with N 80, P2O5 60, K2O 70 kg ha-1 and N 160, P2O5 120, K2O 140 kg ha-1 fertilizer treatments. Yield increasing effect of the fertilizer also depended on the number of plants per hectare at a great extent. The number of plants of the six tested hybrids was 60, 70, and 80 thousand plants per ha.
In Hajdúszoboszló, in 2016 the amount of rainfall from January to October was 605 mm, which was more than the average of 30 years by 160 mm. The yield of hybrids without fertilization changed between 9.63–11.6 t ha-1 depending on the number of plants.
The six tested hybrids is 10.65 t ha-1 in the average of the stand density of 60, 70 and 80 thousand plants per hectare without fertilization, while it is 12.24 t ha-1 with N80+PK fertilizer treatment. That increase in the yield is 1.6 t ha-1, it is significant.
Da Sonka hybrid is sensitive to weather, it is able to produce 6 t ha-1 additional yield in case of favourable condition. However, it has a low stress tolerance. The most stable yields were observed at Kamaria and Pioneer hybrids. The effect of vintage is also an important factor on the yield. In average, the yield of maize was 6.81 t ha-1 in 2015, which was a drought year and 11.86 t ha-1 in 2016 that was a favourable year.

Show full abstract
74
61
Productivity and Nutrient Reaction of Maize Hybrids
Published December 6, 2005
78-83

Several factors influence the quantity and stability of maize yield, the most important being the nutrient supply, the hybrid and precipitation. In 2004, during the maize growing season the precipitation was more than the 30 year’s average, with 68.3 mm, but the distribution was unfavorable. The experiment was carried out in Debrecen at the E...xperimental Station of the University of Debrecen Centre of Agricultural Sciences, Department of Crop Production and Applied Ecology. We tested 10 various hybrids with their own genetic characteristics for five different fertilizer doses, in addition to the parcels without fertilization.
The favorable results reached were due to the rainy season. The average yield varied between 7.78-9.67 tha-1. The DK 440, PR37M34, PR38A24, PR39D81 and PR36R10 of the hybrids reacted to higher fertilizer doses with significant growth yields, the yield (more than 11 tha-1) was the highest for N200, P125, K150 fertilizing. The other hybrids, DKC 5211, Mv Vilma and MV Maraton, gave similar results at the N120+PK fertilizer dose and the ensuing doses depressed the yield. Fertilization was more effective thanks to the precipitation. The fourth and fifth dose increased or decreased maize yield depending on the nutrient reaction of the hybrid. The agro-ecological optimum of NPK fertilization was N120, P75, K90 kgha-1.
During the experiment we tested the moisture loss of five hybrids. The rainy crop year’s effect on the seed moisture content at harvest was higher than in previous years. The seed moisture content hybrids at harvest which have shorter crop years (FAO 300) was 18-19%, and hybrids with longer vegetation periods had more than 20% seed moisture content. DK 440 hybrid had the intensive moisture loss of the five hybrids, at the start of the measurement, the seed moisture content was higher than 40%, and it decreased to 18.6% by harvesting.

Show full abstract
20
47
Analyses of a few physiological parameters of hybrid wheat in the case of different nitrogen supply levels
Published February 18, 2016
49-53

The winter wheat is one of the most determinant crops because its role was always important in human’s life. To increase the average yield there are several possibilities, which are still not clear fields of agricultural plant production. Our main goal was to examine the responses of winter wheat genotypes to different amounts of nitrogen sup...plies. The sowing area of hybrid wheats are increasing, they may have different nutrient nitrogen utilization compared to varieties, and the question arose if it is possible to achieve same yield at lower nitrogen fertilizer application or not.

The present study analyzes the results of winter wheat (Triticum aestivum L.) from tillering growing stage. Under controlled conditions three different wheat hybrids were grown (Hywin, Hystar, Hybiza) with two different amounts of nitrogen supplies (optimal and the fourth part). The dry matter accumulation, relative chlorophyll content and nitrogen content were measured in order to draw conclusions from the different supplies of nitrogen for winter wheat genotypes and their physiological plasticity.

Show full abstract
80
83
The role of leaf area and photosynthesis in optimising the sowing date of maize
Published March 5, 2015
5-10

 

Our sowing date experiment took place in the Demonstration Garden of Institution of Plant Sciences, Agricultural Center of University of Debrecen, in 2012–2014. The thesis contains data of test year 2014. Our purpose, besides several other examinations, was to observe how sowing date influences leaf area index and activity of p...hotosynthesis of maize hybrids, and how those factors affect fruiting. In the experiment we monitored the change of the leaf area index and the photosynthesis of hybrids with four different growing seasons.

Based on the results, it can be concluded that most of the examined hybrids reached their smallest leaf area with the third sowing date and with the highest yield results. Hybrid Da Sonka had the largest leaf area (4.10 m2 m-2), and hybrid DKC 4590 produced the highest yield (13.16 t ha-1)

with the third sowing date.

During testing the photosynthetic capacity, the extremely high performance of the youngest plants with the third sowing date is outstanding, which can be explained by the different ripening periods. Examination of the correlation between the photosynthetic capacity and the yield, by linear regression analysis, also proves that photosynthesis has a determinative role in fruiting.

The results obtained confirm that not only the environmental and agricultural factors in the growing season have effect on the yield, but also other factors like the leaf area index and the photosynthesis are determinative parameters, and all those factors together, modifying effects of each other, develop average yields.

Show full abstract
64
77
Determining factors of test weight in maize (Zea mays L.)
Published November 15, 2007
40-42

Most domestic maize production products are sold on markets abroad. Among the increasingly restrictive quality requirements, the demand for the measurement of test weight has also appeared. This measurement is not unfamiliar in the case of other cereals, such as wheat and barley, but it has not been applied widely in maize. It is likely for thi...s reason that we have such little information and research available on this topic. In this study, we show the current state of this field with references from domestic and international literature.
The density of maize is the weight of a particular volume and the most frequent unit is the test weight (kg/hl). This physical quality factor plays important roles in the storage, transport and mill industries. The value of test weight is influenced by many factors. The most important ones are the moisture content of grains, drying temperature, drought, precipitation, early frost, and the hybrid characters of a given genotype (grain type, FAO number). In general, the grain with higher moisture content has lower test weight and the higher temperature during (above 82°C) desiccation also leads to unfavourable values. Factors such as a drought interval after flowering, early frost in the case of hybrids with higher FAO numbers, injuries by insects, as well as fungal infections also influence the structure and moisture content of the maize grain.
In the future, broader studies (hybrid testing, application of new agrotechnical elements) will be needed for understanding of the factors effecting test weight.

Show full abstract
21
31
Correlation between the weather in 2017 and the productivity of maize
Published June 30, 2018
89-93
In our research we examined the effect of the hybrid, the nutrient supply, the number of plants and the abiotic factors (temperature, amount of precipitation) on the yield, crop quality and yield stability of maize. We devoted special attention to the natural nutrient utilization ability and fertilizer reaction of... maize. The experiment took place in Hajdúszoboszló on chernozem soil, on a nearly 8 ha field. The size of one plot was 206 m2; therefore, this experiment was half-industrial. We tested six hybrids with different genetic characteristics and growing seasons. I analysed the correlation between the nutrient supply and the yield of maize hybrids with control treatment (treatment without fertilization) and with N 80, P2O5 60, K2O 70 kg ha-1 and N 160, P2O5 120, K2O 140 kg ha-1 fertilizer treatments. The yield increasing effect of the fertilizer also depended on the number of plants per hectare to a great extent. The number of plants of the six tested hybrids was 60, 70, and 80 thousand plants ha-1.
In Hajdúszoboszló in 2017, up to October, 445.8 mm of rain fell, which is in line with the average values of 30 years, and is only 45.7 mm less than those. In 2017, the effect of increasing the plant number was slighter. Averaged over the observed fertilizer treatments and hybrids, the yield was 9.10 t ha-1 with 60 thousand plants ha-1, 9.11 t ha-1 with 70 thousand plants ha-1 and 9.12 t ha-1 with 80 thousand plants ha-1. Without fertilization, in most cases, increasing the plant number from 60 thousand plants ha-1 to 70-80 thousand plants ha-1 does not increased the yield but decreased it. With N80+PK treatment the yield changed between 8.90 and 11.27 t ha-1. The effect of increasing the plant number was just slightly observable and did not show a clear tendency. The effect of changing the plant number, even with the highest dosage of fertilizers, could not be detected adequately. In contrast with the plant number, the effect of the different fertilizer treatments was expressly traceable. Compared to the control treatment (treatment without fertilization), with N80+PK fertilizer dosage with 60 thousand plants ha-1 the yield increased by 3.36–4.99 t ha-1. The smallest demonstrable proof, i.e. the LSD5% was 0.22 t ha-1, which means that fertilization, in each case, significantly increased the yield. When analysing the effect of fertilization in the average of the hybrids and the different plant numbers, a yield of 5.61 t ha-1 could be detected, which value was 10.12 t ha-1 with N80+PK treatment and 11.61 t ha-1 with N160+PK treatment. Thus, it can be calculated that compared to the treatment without fertilization, the N80+PK treatment increased the yield by 4.51 t ha-1, while compared to the N80+PK treatment, the N160+PK treatment increased the yield by 1.49 t ha-1. In addition to agrotechnical factors, in maize production, the impact of the crop year is specifically of high importance.
The average yield of hybrids (in the average of the different fertilizer treatments) was 6.81 t ha-1 in 2015, 11.86 t ha-1 in 2016 and 9.11 t ha-1 in 2017. When comparing the yield results against the precipitation data, it is clearly visible that the amount of rain fell in the January– October period is directly proportional to the average yield of maize. The effect of the crop year can be defined in a 5.05 t ha-1 difference in the yield.
Show full abstract
77
67
Effect of harvest on the different fertilization methods of asparagus (Asparagus officinalis L.)
Published February 3, 2016
33-37

The experiments were performed in the University of Debrecen Centre for Agricultural Research Institute of Nyíregyháza of 1500 m2 asparagus plantation in 2011. We were determind the number of shoots, plant height, fold thickness and yield of asparagus hybrid. I studied to the effects of various cropyear is addition Grolim hybrid asparagus gro...wth and development. Compared to previous years, 2014 was unusually wet and cold weather conditions which causes the plantation has developed outstanding. The soil temperature early and dynamic increase due to, the harvest had started a one month earlier 2014 than the 2013. The experiment asparagus harvested from lower yields as a result of the extremely dry spring in 2015.

Show full abstract
62
86
The effect of NPK fertilization and the number of plants on the yield of maize hybrids with different genetic base in half-industrial experiment
Published March 23, 2016
103-108

In our research we examined the effect of the hybrid, the nutrient supply, the number of plants and the abiotic factors (temperature, amount of precipitation) on the yield, crop quality and yield stability of maize. We devoted special attention to the natural nutrient utilization ability and fertilizer reaction of maize.

The experiment ...took place in Hajdúszoboszló on chernozem soil, on a nearly 8 ha field. The size of one plot was 206 m2, this it was a halfindustrial experiment. We tested six hybrids with different genetic characteristics and growing seasons. I analysed the correlation between the nutrient supply and the yield of maize hybrids with control treatment (treatment without fertilization) and with N 80, P2O5 60, K2O 70 kg ha-1 and N 160, P2O5 120, K2O 140 kg ha-1 fertilizer treatments. Yield increasing effect of the fertilizer also depended on the number of plants per hectare at a great extent. The number of plants of the six tested hybrids was 60, 70, and 80 thousand plants/ha.

In Hajdúszoboszló, in 2015 the amount of rainfall from January to October was 340.3 mm, which was less than the average of 30 years by 105.5 mm. This year was not only draughty but it was also extremely hot, as the average temperature was higher by 1.7 °C than the average of 30 years. In the critical months of the growing season the distribution of precipitation was unfavourable for maize: in June the amount of rainfall was less by 31mm and in July by 42 mm than the average of many years.

Unfavourable effects of the weather of year 2015 were reflected also by our experimental data. The yield of hybrids without fertilization changed between 5.28–7.13 t ha-1 depending on the number of plants.

It can be associated also with the unfavourable crop year that the yield of the six tested hybrids is 6.33 t ha-1 in the average of the stand density of 60, 70 and 80 thousand plants per hectare without fertilization, while it is 7.14 t ha-1 with N80+PK fertilizer treatment. That increase in the yield is only 0.81 t ha-1, but it is significant. Due to the especially draughty weather the yield increasing effect of fertilizers was moderate. In the average of the hybrids and the number of plants, increasing the N80+PK treatment to N160+PK, the yield did not increase but decreased, which is explicable by the water scarcity in the period of flowering, fertilization and grain filling.

The agroecological optimum of fertilization was N 80, P2O5 60 and K2O 70 kg ha-1. Due to the intense water scarcity, increased fertilization caused decrease in the yield. As for the number of plants, 70 000 plants ha-1 proved to be the optimum, and the further increase of the number of plants caused decrease in the yield.

Show full abstract
88
75
Technological development of sustainable maize production and its effect on yield stability
Published September 5, 2018
379-388
In 2015 and 2016, we examined the effect of NPK nutrients, sowing date and plant density on yield on typical meadow soil. The amount of precipitation was 282.0 mm in 2015 (January–September), 706.0 mm in 2016 and the 30-year averageis 445.8 mm.
Agrotechnical factors:
– Experiment a)
   &n...bsp;       5 Dow AgroSciences hybrid with three sowing dates and three plant densities
– Experiment b)
In 2015 eight, in 2016 ten hybrids with different genetic characteristics and growing seasons, with control (without fertilization), N80+PK and N160+PKtreatments, five plant densities (50–90 thousand) with 10 thousand plants difference between the different densities.
In a drought year, we reached the higher yield in the earlier sowing date and with the lower lower plant density of 70 thousand plants ha-1-. The maximum yield, depending on the agrotechnical factors, was 10–12 t ha-1 in 2015, while in 2016 it was 14–16 t ha-1. Yield stability can be increased using hybrid-specific cultivation techniques.
Show full abstract
76
47
Effect of genotypes and cropyear on thedifferent cultivation parameters of asparagus (Asparagus officinalis L.)
Published February 25, 2014
31-34

The experiments were performed in the Research Institute of Nyíregyháza Research Institutes and Study Farm, Centre for Agricultural Sciences University of Debrecen of 1500 m2 asparagus plantation. The asparagus was planted in 2011. We were determine the number of shoots, plant height and fold thicknes of asparagus hybrid. We can co...ntinuously monitored the growing parameters of asparagus. The harvest of asparagus was started in 2013, so we were able to measure to quantity. The weather was characterized by warm and matched precipitation in the growing season (April–July) in 2011 and 2012. Contrarily, the weather was very hot and dry after the late frost in 2013. The Vitalim produced the largest quantity, then the Cumulus and the end of Grolim hybrid. Number of shoot and plant height sequence is identical to the previous one. The Grolim asparagus hibrid has the largest basal diameter.

Show full abstract
107
100
The analysing of value measuring features of Hungarian speckled hen
Published December 21, 2009
17-23

Our College has been dealing with the crossbreeding of two Hungarian speckled hen breeds, the bare-neck and the featheredneck, to maintain the breeds since 1977. Apart from the gene preservation, we endeavour to find the best way for the production-purpose utilisation of the speckled hen stock. On the basis of our experiments the laying hens ca...n be used in small-scale egg production. As for meat production, these pure-breds cannot compete with the various types of the colour-feathered hybrid constructions available in Hungary. On the basis of the results of the cross-breeding with cock-lines of various hybrid types for direct production purposes we can conclude that the Hungarian speckled hen is suitable as a mother line to produce meat-type chickens in alternative breeding systems.

Show full abstract
9
131
Examining reaction of sunflower genotypes on planting time on chernozem soil
Published March 11, 2014
93-99

We studied the effect of planting time on plant pathological factors, leaf area index and yield production by applying various fungicid treatments on two different sunflower genotypes in 2013.

By delaying planting time, both the extent of Diaporthe, Alternaria and Phoma infections decreased. The differences between the volume of infecti...ons were significant in the case of the early and late sowing time results. The application of fungicide treatments induced a notable decrease in the extent of infections for all three pathogens examined. The LAI-values varied between 0.3 and 5.6 m2/m2 in 2013 depending on the hybrid, sowing time and treatment. Stocks planted at distinct times reached maximum leaf coverage at different times. The planting time and the fungicide treatment had a significant effect on the formation of the leaf area. In the case of average and late planting times, fungicide treatments elongated the preservation of the green leaf area.

With respect to the yield amount, average planting time (27 April, 2013) turned out to be optimal in 2013 (control – NK Ferti: 4.621 kg ha-1, PR64H42: 4.196 kg ha-1; double-treated: NK Ferti: 5.282 kg ha-1, PR64H42: 5.090 kg ha-1). Fungicide treatments resulted in significant yield growth in all cases during our research.

We applied Person correlation analysis to evaluate the hybrids’ sensibility to infections and our results varied in the case of Diaporthe and Phoma (r=-0.343*, -0.379**). Infections of the three pathogens were significantly reduced by delaying the planting time and applying fungicides. Late sown stocks preserved the green leaf area for a longer period. Besides, the application of the fungicide treatment and the hybrid itself also led to the preservation of the green leaf area. However, pathogens examined notably decreased the leaf area by the end of the growing year. The fungicide treatment had a remarkable effect on yield growth (r=0.603**). Furthermore, the presence of higher LAI-values in the period prior to August also induced higher yields.

Show full abstract
62
69
Evaluation of reaction to plant density of sunflower hybrids by regression and Kang’s stability analysis
Published December 21, 2008
101-109

The world production area and the total production of sunflower has significantly been growing. The harvested yield was 23.4 and 21.1 million ha in 2005 and 2001, respectively. The total sunflower seed production has also unexpectedly increased.
Although sunflower is produced on lower quality soils in Hungary, in 2005 the average harvested y...ield was 2.43 t ha-1, which was the highest in the world. 
Sunflower is a typical commercial plant and fits well in the crop structure. Since in terms of acreage the most significant crops are corn and cereals, the partial monoculture cultivation cannot be avoided. Sunflower production is a way to eliminate this problem, therefore it has an important role both in cultivation and ecological points of view.
Accordingly, sunflower has an important role in reducing the monoculture cultivation of some plants, as well as increasing biodiversity. Sunflower well adapts to Hungary’s climatic conditions and its production is easily practicable in our country.
The reaction of sunflower hybrids on crop density change is different. Some hybrids are more some are less sensitive to this parameter. In different crop years, the crop density optimums of the different genotypes are also different. In Hungary, the yield and quality is primarily determined by fungal infections, while viruses and bacteria are less important.
The research was conducted at the Látókép farm and Regional Research Institute of the University of Debrecen, Centre of Agricultural Sciences. The research institute is situated by Road 33,15 km from Debrecen in the Hajdúság. The duration of the experiment was seven years, 10 hybrids were examined in each year.
Two hybrids used every year, Aréna/PR and Alexandra/PR hybrids were tested by Kang’s stability analysis. We found that Alexandra/PR was most balanced at every levels of crop density. Both hybrids performed most stable yield at 65000 ha-1 crop density level and less balanced at 35000 ha-1 crop density level. As a result of improved environmental conditions, the yield increase of Aréna/PR was higher than that of Alexandra/PR.
Our regression analysis found that the maximum yield of Lympil, Louidor, Hysun 321, PR63A82 and PR64A63 hybrids were harvested at 47000-60000 plant ha-1 crop density level. The statistical analysis showed that the highest yield was harvested from Lympil and Hysun 321. As regards the crop yield, the most stable hybrids were Louidor and Lympil. The optimum crop density interval of Rigasol/PR and Larisol (58000 plant ha-1) was wider than that of Diabolo (46000 plant ha-1). The maximum yield of Larisol was higher at the optimal crop density level. As regards yield, Diabol was the most stable hybrid.
The statistical analysis on the stability of the yield of Alexandra/PR and Aréna/PR showed that Aréna/PR is more stable, and its optimal crop density level is lower than that of Alexandra/PR.

Show full abstract
31
48
Changes in the Diaporthe helianthi Infection of Sunflower Hybrids Between 1998 and 2002
Published May 11, 2003
214-233

Plant protection, and especially the efficiency of protection against mycosis, is a very important production technological element concerning sunflower. The efficiency of production can be increased on the basis of a thorough pathological survey and its results carried out in a wide variety of hybrids, as the features of hybrids, the reactions... of genetic bases to pathogens can be found out under domestic conditions.
The tests were carried out at variety-test lots of OMMI for hybrids used for food or oil and other sunflower varieties admitted by the state at the Experimental Site DTTI Látókép, Centre of Agricultural Sciences, University of Debrecen between 1998 and 2002. The number of the tested hybrids was 49 in 1998, 45 in 1999, 49 in 2000, 55 in 2001, and 44 in 2002.
Due to the infection source of high amounts remained from 1997 and the favourable weather conditions for the pathogens, an infection of high degree was experienced in the tested stands. The lowest infection index in the hybrids with a very short vegetative period was experienced with Beni hybrids. Comparing to the average of the hybridgroup with short vegetative period, a low infection index characterised the Baleno, Trident, IBH-166, Hysun 321, Resia, Alexandra, Cergold and Pixel hybrids. In 1999, among hybrids with medium vegetative period, Zoltán, Zsuzsa and Util hybrids could be highlighted because of their low infection index. In 1998, among confentionary hybrids, Marica-2 hybrid had the most favourable index values (2,55).
During our trials, the experienced infection dynamics were compared in the event of hybrids with higher and lower susceptibility under different sowing technological elements. The results call for the fact that when a hybrid with higher susceptibility is produced, production technological elements, such as the time of sowing, influence considerably the damage caused by the pathogen, therefore it must not be ignored when its determination takes place. In the event of hybrids with lower susceptibility the change of the tested production technological elements within the biological optimum does not lead to the increased risk of the damage caused by Diaporthe helianthi.

Show full abstract
12
21
Association analysis of TNNI1/XbaI polimorphism on carcass quality in hybrid pigs
Published March 24, 2015
59-62

The contractile protein, which is encoded by troponin I 1 (TNNI1) gene, is located on the thin filaments of slow fibres in striated muscle. TNNI1 protein is a part of the troponin complex which plays an important role in regulation of muscle contraction by preventing actin-myosin interaction in absence of calcium. According to biological role, ...this gene can be potential marker for meat production related traits. The aim of this study is to define whether the previously reported gene polymorphism (EU743939:g.5174T>C) is connected with the slaughter traits measured in a standard slaughterhouse of the examined four-line European hybrid. The study included data from 404 gilts and barrows from 2 different samples. The polymorphism was detected using PCR-RFLP (Polymerase Chain Reaction-Restriction Fragment Length Polymorphism) method with XbaI restriction enzyme. In this study the allele frequencies were found as follows: C: 0.84 and 0.808; T: 0.16 and 0.192. Based on result of the present study no significant impact of polymorphisms on production parameters was found.

Show full abstract
71
77
The effect of sowing date and plant density in three maize hybrids germination and growth dynamics
Published February 18, 2016
105-110

The maize research was set up on chernozem soil at Látókép research area of the Centre for Agricultural Sciences University of Debrecen. We examined the following hybrids SY ARIOSO (FAO 300), P9486 (FAO360), DKC 4943 (FAO 410). The experience was set u pin three different plant density. These were 60, 76 and 90 thousand plant ha-1.... The experience was set up in three different sawing date, early, average and late. The germination and growing dynamic measurements was measured in three hybrid, three sawing date, three plant density in four replication. well observed at the first sawing date (April 5) the soil was too cold therefore the germination was begins very slowly to be slowly increased. The second sowing time was the average (April 21) there the germination launch as soon as possible more rapid growth in the amount of heat. We experienced the most intense germination was in the case of the emergence late sowing date (May 5). Looking at the growth dynamics for the first two sawing date was side by side and almost equal to the maximum value. This is explained by the adaptive capacity of the maize to compensate for the sawing difference. For the third time, despite the delayed sawing the maize began to grow more dynamically than in previous sawing times due to the results of the initial good conditions it growth faster than halted in the second half of the season because of the high temperatures and lack of precipitation.

Show full abstract
66
111
The effect of sowing date and plant density of winter oilseed rape (Brassica napus var. napus f. biennis L.) population
Published June 30, 2018
213-215

The experiment has been set up in the University of Debrecen Látókép Experimental Station in three different years (2014, 2015 and 2016), three different plant densities 200, 350 and 500 thousand ha-1, four replications of the same nutrient supply with using a line spacing of 45 cm. In the experiment, the fore crop was winter wheat in each y...ear. The amount of weeds was observed five times in the last experimental year (2016/2017). In the three experimental years, the highest yield was harvested from the early sowing plot with the highest plant density. On the basis of the Pearson’s correlation analysis there was significant negative correlation (r=-0.583) between the effect of the annual year and yield of the hybrid.

Show full abstract
85
80
The Effect of Sowing Time and Plant Density on the Yield of MaizeHybrids
Published December 6, 2005
95-104

The crop technology of maize has two important elements, sowing time and plant density. In 2003 and 2004 we studied the effect of these two factors on the growth and production of maize in an experiment carried out near Hajdúböszörmény.
The soil of the experimental plots was meadow soil.
Weather in both years was differed greatly. 200...3 was drought. Neither the distribution nor the quantity of the precipitation were suitable in the growing season for maize. This fact basically determined the results.
In 2004, we could talk about a favorable and rainy season. The distribution and quantity of precipitation was suitable between April and September. The average temperature was also suitable for maize.
Results of the sowing time experiment:
In 2003, we tested seven hybrids at four sowing times. Hybrids in the early maturity group gave the highest yield at the later sowing time, while the hybrids of the long maturity group gave it at the earlier planting time. The yield of PR34B97, PR36N70, PR36M53 hybrids was the best at every planting time. The moisture loss of hybrids in the late maturity group was faster in the maturity season, but the seed moisture content was higher than the hybrids with early sowing time. The seed moisture content was very low due to the droughty year. In two hybrid cases, this value was higher than 20% only at the fourth sowing time.
In 2004, we examined the yield and seed moisture content of nine hybrids. In the favorable crop year, the yield of every hybrid was the highest at the second and third sowing time. Yields of PR34H31 and PR38B85 hybrids were significant. The seed moisture content at harvest was higher than the previous year due to the rainy season. In the case of hybrids sown later, this value was higher by 30%. However, we noticed that this value was lower at the earlier sowing time than at the later.
The crop year had a more dynamic effect on maize than the sowing time. First of all, the quantity and distribution of precipitation played an important role in respect to yield safety.
Results of the plant density experiment:
We tested the reaction of hybrids at four plant densities (45,000, 60,000, 75,000 and 90,000 stock/ha) every two years. In 2003, the tested seven hybrids reached the highest yield at the 90,000 stock/ha in the face of a droughty year. The effect of forecrop and favorable nutrients caused these results. In the rainy 2004 year, the yield grew linear with the growing plant density. The yield of the best hybrids were 14-15 t/ha at the 90,000 stock/ha.
Such a high plant density (90,000 stock/ha) couldn’t adaptable in farm conditions in rainy season. It is practical to determine the interval of plant density besides the optimum plant density of hybrids which gave correct yield. The farmers have to use the low value of this interval due to the frequent of the droughty years.

Show full abstract
28
51
The effect of production area on the development of yield producing factors of maize (Zea mays L.) hybrids of different genotypes
Published February 18, 2016
67-72

Maize yield amount development is determined by the given crop year and the genotype of the applied hybrid, but beside these also by the applied agrotechnical factors, in particular by sowing technology. The development of yield amount and yield producing factors of five maize hybrids of different genotypes has been studied in a small-plot fiel...d experiment by the application of different row spacings and plant density variants. The production of the individual plants shows decreasing tendency parallel to the increasing plant density, however, this decrement is compensated by the higher number of plants per unit production area. Individual plant production is determined by the development of yield producing factors, such as the length and the diameter of cobs, just as by the thousand seed weight – that were studied in the present research work as well.

In the present research work the decreasing row spacing resulted in a yield increment of 0.67 t ha-1 (4.53%) in 2013, while in contrast in 2014 yield was decreased by 1.75 t ha-1 (14.87%). The high amount of precipitation in March was determinant in 2013: it filled up the soil water stock and balanced the negative effect of the inadequate amount and distribution of precipitation during the vegetation period for the yield. Lower extent of yield increment (0.6 t ha-1) was registered in 2014 in case of the row spacing of 76 cm than in the previous year. In case of a row spacing of 45 cm the difference between the two crop years was 3.1 t ha-1. The highest impact on the yield production factors was found in all treatment combinations in case of the applied hybrid among the three studied treatment factors. In the crop year of 2014 the effect of plant density on cob diameter and thousand seed weight could be revealed as well. In case of the cob diameter significant difference was found between the plant densities of 70 000 and 90 000 plants ha-1, just as between the populations with densities of 50 000 and 90 000 plants ha-1. In case of the thousand seed weight significant differences could be found by the application of plant densities of 70 000 and 90 000 plants ha-1. The highest values of the studied yield producing factors were measured in case of the plant densities of 50 000 and 70 000 plants ha-1; increasing the plant density to 90 000 plants ha-1 resulted in rather decreasing values.

Show full abstract
68
69
Change of cultivation parameters of asparagus (Asparagus officinalis L.) on different nutrient systems
Published September 18, 2014
67-71

...5); font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px; text-decoration-style: initial; text-decoration-color: initial;">The experiments were conducted at the Research Institute of Nyíregyháza, Research Institutes and Study Farm, Centre for Agricultural Sciences, University of Debrecen. We have studied the shoot number, plant height and fold thickness os asparagus for 3 years. We have set a fertilization experiment on 1500 m2 of plantations in 2013. We applied fertilizer, manure and sheet manure compost. The set yield we achieved by using fertilizer treatment. The Vitalim produced the largest crop, then the Cumulus and the lowest yield Grolim. We was produced by highest green mass was observed in Vitalim and Cumulus hybrids in each year. The Grolim hybrid produced the smallest shoot and plant height but the fold thickness was longer in the other two hybrids. Overall, the Vitalim hybrid has the best production parameters and each season.

Show full abstract
64
82
Sensitivity of maize hybrids to common smut under field artificial inoculation conditions
Published June 14, 2017
25-28

Common smut disease of maize is one of the most frequent diseases of crop. In the last decades the importance of disease has decreased in feeding maize production, however its importance increasing again nowadays, especially at sweet maize hybrids. The aims of this work was to find hybrids possess of resistance, and to evaluate which ones are m...ore or less susceptible under field artificial inoculation circumstances. Among feeding maizes the less susceptible hybrid was ‘P9578’, and the most susceptible ’NK Columbia’ hybrid, and differences in cob infection between them was significant (8.8%). At sweet corn hybrids the less susceptible was ’Prelude’, while the most susceptible was ’Jumbo’ with very high significant 74.6% differences.

Show full abstract
76
77
26 - 50 of 102 items
<< < 1 2 3 4 5 > >>