Search
Search Results
-
Plant growth analysis of wheat populations in a long-term field-experiment
147-151Views:120The experiments were conducted as part of the long-term trial adjusted, in triculture (pea-wheat-corn) and biculture (wheat-corn), at three nutrition levels, with the use of one crop protection technologie (conventional) at the Látókép Research Site of the Centre of Agricultural Scienses, University of Debrecen, on a chernozem soil. The wheat variety used in the long-term trial was GK Csillag, which was sown at 5,8 million germs/ha.
The effect of pre-crops and nutrient-supply levels on some growth-parameters (LAI, HI, LAD), just as SPAD-values and yield amounts of winter wheat has been investigated in this experiment. We tried to find out the extent of relationship between the different parameters, so we determined the relationships between different nutrient-supply levels, yield amounts, LAI- SPAD- and LAD-values – measured in the crop-year of 2010–2011 in different crop rotation systems – by using correlation analysis. It has been stated both in case of bi- and tri-culture crop-rotation systems that different fertilizer dosages had significantly affected the leaf area index dynamics and its maximal value, and that increasing N+PK fertilization has
significantly increased the duration of leaves, as well. The highest SPAD-values were measured during the flowering and grain filling stages. However, we haven’t revealed significant differences between all fertilizer treatments. In case of the bi-culture crop-rotation system harvest index values showed an increasing tendency parallel to the increasing nutrient-supply levels, while in case of the tri-culture system this tendency was rather decreasing. However, these differences were
not significant. Parallel to the increasing fertilizer dosages yield results were increased in a significant extent. At the same nutrient supply-levels 2088–4615 kg ha-1 higher yields were measured in the tri-culture than in the bi-culture system. The correlation analyses have confirmed that all of the investigated parameters (yield amount, LAI, SPAD, LAD) had almost in all cases close positive correlation to the nutrient-supply level and the yield amount in both crop-rotation systems. These results have confirmed that the leaf area, the leaf duration, the SPAD-values and the fertilization have altogether resulted in the production of maximum grain yields. -
Effect of different sources and doses of sulphur on yield, nutrient content and uptake by spring wheat
109-115Views:126The objective of this study was to investigate the effect of two sulphur forms (sulphate and tiosulphate) in combination with three different N:S ratios on the yield of spring wheat and total N- and S-content and uptake by the aboveground biomass on chernozem and sandy soil. In the greenhouse experiment, the effects of two sulphur forms were compared: sulphate (SO42-) and thiosulphate (S2O32-). The sulphate was applied as potassium-sulphate (K2SO4) and thiosulphate as ammonium-thiosulphate ((NH4)2S2O3). Increasing doses of both sulphur forms (24, 60, 120 kg S ha-1) were used with the same nitrogen dose (120 kg N ha-1) which caused three different N:S ratios background (1:0.2, 1:0.5, 1:1). Nitrogen was supplied in the form of monoammonium-phosphate (MAP), ammonium-nitrate and ammonium-thiosulphate. Plant samples were taken in three different development stages of spring wheat based on the BBCH scale: at the stage of BBCH 30–32 (stem elongation), BBCH 65–69 (flowering) and BBCH 89 (ripening). The total nitrogen and total sulphur content of plant at different development stages and also wheat grain were measured by Elementar Vario EL type CNS analyser. The nutrient uptake by plant and grain was calculated from the yield of spring wheat and the N and S content of plant. The grain yield on chernozem soil ranged between 6.31 and 12.13 g/pot. All fertilised treatments significantly increased the grain yield compared to the control. The highest yield was obtained in the case of the application of 120 kg N ha-1 and 60 kg S ha-1in sulphate form. The grain yield on sandy soil varied from 2.53 to 6.62 g/pot. The fertilised treatments significantly enhanced the yield compared to the control. The highest yield was observed in the case of the application of 120 kg N ha-1 and 60 kg S ha-1 in thiosulphate form. On chernozem soil the increasing doses of sulphur (24, 60, 120 kg S ha-1) with the same N dose (120 kg N ha-1) increased the N-content of spring wheat at all development stages and in the grain. The treatments with different sulphur sources did not cause further changes in the N-content. On sandy soil in the most cases the N-content did not change significantly as a result of increasing sulphur doses. The treatments with sulphate form basically resulted higher nitrogen-content than treatments with thiosulphate form. The treatments with increasing sulphur doses resulted higher S-content on both of chernozem and sandy soil in the case of all development stage. Comparing the effect of the applied sulphur sources on the S-content it can be stated that at the stage of BBCH 30–31 and 65–69 the treatments with sulphate form resulted higher sulphur-content. At the stage of BBCH 89 there was no significant differences in S-content of grain as a result of different sulphur-sources.
-
Effect of divided nitrogen and sulfur fertilization on the quality of winter wheat
27-31Views:158The ecological characteristics and agro-ecological conditions in Hungary provide opportunities for quality wheat production. For the successful wheat production besides the favorable conditions; the proper use of expertise and appropriate cultivation techniques are not negligible. Successful cultivation affected by many factors. To some extent we can affect, influence and convert the abiotic factors.
Today, a particularly topical issue is the question of nutrition and that the species’ genetic code can be validated using the appropriate quantity and quality fertilizer. Beyond determining the fertilizer requirements of the winter wheat it is important to align the nutrient to the plant’s nutrient uptake dynamics and to ensure its shared dispensing. In any case, it is important to note the use of autumnal base-fertilizer as complex fertilizer. Hereafter sharing the fertilizer during the growing season with the recommended adequate nitrogen dose.The first top dressing of winter wheat in early spring (the time of tillering) can be made, the second top dressing at the time of stem elongation, and the third top dressing at the end of the blooming can be justified. Determining the rate of fertilizer application depends on the habitat conditions and the specific nutrient needs of plants. In autumn the 1/3 of the planned amount of basic fertilizer should be dispensed (in case of N). During setting our experiment we used 3 doses (0 kg ha-1 N-1 active ingredient; 90 kg ha-1 N-1 active ingredients and 150 kg ha-1 N-1 active ingredient). Application dates beyond the autumn basic fertilization are the following: in one pass in early spring, divided in early spring and the time of run up, early spring and late flowering. In addition to nitrogen the replacement of sulfur gets a prominent role as a result of decreased atmospheric inputs. The proper sulfur supply mainly affects the quality parameters. It influences positively the wheat flour’s measure of value characteristics (gluten properties, volume of bread, dough rheology.
In terms of nitrogen doses; the larger amounts (150 kg ha-1 N-1 drug), is the proposed distributed application, while in the case of lower nitrogen (90 kg ha-1 N-1 drug) in a single pass in the early spring can achieve better results. After using sulfur the quality values among the nutritional parameters that can be associated with gluten properties took up higher values than the samples not treated with sulfur.
-
Determining factors of test weight in maize (Zea mays L.)
40-42Views:92Most domestic maize production products are sold on markets abroad. Among the increasingly restrictive quality requirements, the demand for the measurement of test weight has also appeared. This measurement is not unfamiliar in the case of other cereals, such as wheat and barley, but it has not been applied widely in maize. It is likely for this reason that we have such little information and research available on this topic. In this study, we show the current state of this field with references from domestic and international literature.
The density of maize is the weight of a particular volume and the most frequent unit is the test weight (kg/hl). This physical quality factor plays important roles in the storage, transport and mill industries. The value of test weight is influenced by many factors. The most important ones are the moisture content of grains, drying temperature, drought, precipitation, early frost, and the hybrid characters of a given genotype (grain type, FAO number). In general, the grain with higher moisture content has lower test weight and the higher temperature during (above 82°C) desiccation also leads to unfavourable values. Factors such as a drought interval after flowering, early frost in the case of hybrids with higher FAO numbers, injuries by insects, as well as fungal infections also influence the structure and moisture content of the maize grain.
In the future, broader studies (hybrid testing, application of new agrotechnical elements) will be needed for understanding of the factors effecting test weight. -
Tulip bulbs preparation by heat treatment for forced culture in green house
70-72Views:71Tulip can be grown in parks as ornamental plant and cut flowers, or possibly in protected areas for cut flowers during winter and early
spring.
An important condition for the successful cultivation of tulips is the quality of the bulbs that are going to be planted and their
biological preparation.
Under the quality aspect bulbs have to be uniform and large, preferably with circumference greater than 11 cm and must have good
phytosanitarical status.
Preparation of organic bulbs for ensuring the continuation of the differentiation process of germs (floral), is made during the storage.
It is known that the preparation of organic bulbs are made in interaction with environmental factors, among which temperature plays an
important role. At the beginning and throughout the process of biological preparation, temperature is maintained at a higher level then the
temperature must be low until planting.
The temperature level and the duration of treatment varies by followed objective respectively early or late flowering and staggered
flowers production over a longer period of time. -
Evaluation of blue and red corn landraces
239-243Views:73Corn breeding can be successful only on a broad base of genetic material. The expansion of breeding aims includes the research of germplasm materials. In our experiments, we examined 11 blue, purple and red exotic corn varieties on two locations in Hungary. We conducted a complex study to obtain more information. We studied several morphological and phenological features and determined the most important qualitative parameters (protein, fat, ash). We applied the Tassel Area Index (TAI) under Hungarian conditions and compared it with the pollen producing ability of different genotypes. Results show that there are great opportunities in exotic corn varieties. Their quality exceeds that of the yellow ones in many cases. There are significant differences in yield and nutritional parameters. The favorable nutritional composition is not coupled with great productivity. Based on their flowering time and their agronomical features, they can be cultivated under Hungarian conditions as well. They match the new breeding aims, so they can be used as functional food or energy plants. With their high pollen producing ability and TAI, they can be utilized as markers in future pollen research.
-
Preliminary estimation of the efficacy of Fusarium sporotrichioides Sherb. as biological control agent against common milkweed (Asclepias syriaca L.)
201-204Views:248A study of fungi responsible for severe leaf spots of common milkweed (Asclepias syriaca L.) in the Hajdúság region (East Hungary), Fusarium sporotrichioides and Alternaria alternata were isolated from infested leaf tissues. F. sporotrichioides was the most virulent fungus in pathogenicity tests conducted on healthy leaves of common milkweed plants. Inoculation of common milkweed (A. syriaca) in different growth stages with F. sporotrichioides yielded similar symptoms as the original ones. Spray mixtures containing 1.0×106 conidia/ml gave effective control when common milkweed plants were sprayed until runoff occurred. Laboratory (wet chamber) and field experiments showed that asexual spores of the fungal pathogen, F. sporotrichioides, exhibited bioherbicidal activity against common milkweed (A. syriaca).
More efficient control efficacy was observable on elder plants (at flowering stage) than younger ones. These results initiate that this fungus may be a biocontrol agent for controlling this invasive weed but should clarify its hosts because it could infect cultivated plants as well.
-
Evaluation of the Green bean variety candidate BU-16
75-81Views:72This study presents the results of the variety comparison trials conducted with the French bean variety candidate BU-16 on sandy soil, during two years at the Research Center of the University of Debrecen.
The outstanding characteristics of this variety candidate are the early maturity, the showy pods (yellow, straight, cylindrical cross-section „pencil bean”) and the high yield potential.
The experiments were conducted with a randomized design, with five varieties and four replications. The varieties (of which two are foreign and three are domestic) were as follows: BU-16 fj, Maxidor, Paridor, Hungold and Budai piaci. The individual plots were 2 m wide and 4 m long. The seeds were sown at a density of 30 germs per m2, with a row spacing of 50 cm.
The following parameters were taken: time of flowering, time of green maturity, plant height, height of the lowest pod above ground level, number of pods per plant, distribution of the pods by the state of development (20 plants), usable pod length (1 kg of standard crop-yield), yield per hectare based on the number of plants per plot. The experiments were evaluated statistically with Excel and SPSS softwares.
Results obtained with the variety candidate BU-16:
– The time from the emergence to green maturity is 45 to 46 days, which is short as compared with the other cultivars studied.
– Plant height is 38cm (two years average), which is among the highest ones, together with Paridor.
– The pods are set high above the ground level similarly to Paridor, the height of the lowest pod is 19 cm.
– The average number of pods per plant is 13 (two years average) similarly to Paridor and to Maxidor.
– The distribution of pod size in 2007 is as follows: 68% of the pods of BU-16 is of the standars size, which is a good rate. The value of this trait for the other varieties is 60 to 63%, except for Paridor, the value of which is similar to that of BU-16.
– The usable pod length (10 to 14 cm) is 63% in 2007 and 84% in 2006. Similar pod length rates were obtained for Maxidor, while the rate for Paridor is as high as 91%.
– The total yield and the standard yield of BU-16 is among the highest ones.
According to the results obtained and presented above, the variety candidate BU-16 is the earliest maturing among the varieties tested with high yield potential which, however, is not significantly different from that of the others. Significant differences can only be detected in plant height and the number of pods per plant. Considering the results, BU-16 is to be further tested. -
Allelopathic Effect of Italian Cocklebur on Sugar Beet
74-77Views:79Cockleburs are noxious weeds in Hungary, where they are widespread in row crops, especially in maize, sunflower and sugarbeet. A low density population of these weeds may be harmful because of their large competitive ability, fast growth in early phenological stages, allelopathy, and persistant sprouting.
Allelopathy of Xanthium italicum Mor. was examined during the growing season in 2004. Root and shoot samples were collected at 4 or 5 leaves stage (in the end of May and in the beginning of June) and before flowering (in the beginning of July) before and after rain. Extracts were made in tap water. The test plant was Beta vulgaris L.; its germination, root and shoot growth were evaluated at the 6th and 10th days after treatment.
Most of extracts inhibited the germination of sugar beet. In these experiments the phenological stage of the donor plant determined slightly the effectiveness of the extracts on sugar beet. Generally, significant differences existed between treatments only in cases of concentrated extracts.
Rainfall can modify the inhibitory effect of extracts (especially shoot extracts). Shoot extracts of young plants inhibited stronger germination and growth after rain than before rain. Density of cockleburs influenced the effect of extracts, as well. Generally, differences between the efficacy of extracts was larger after rain.
The results supported the hypothesis that the phenological stage and some environmental factors can modify allelopathy of cockleburs. -
Vegetative shoot growing and yield productivity of different plum cultivar and rootstocks combination
25-29Views:112We planted containers plum rootstocks and cultivar combinations for irrigation and rootstocks experiment. We planted Cacanska lepo tica, Katinka, Jojo, Topfive, Toptaste, Topper plum cultivar on Mirobalan, St Julien A, St Julien GF 655/2, Wavit, Wangenheim, and Fereley rootstocks. Before budding we measured the trunk diameter on trees, than I count the trunk cross area, we measured the high of trees, the high of crown, and the wide of crown, and counted the volume of crown from these data. We conclude the vigorous from the trunk cross area and the volume of crown. In the started growing less vigorous combinations look like Topfive/Wavit, Jojo/Mirobalan and Katinka/Mirobalan grafted on the basis trunk cross area and the volume of crown. In the vegetative period we measured the shoot growing on model branch every started of months. So we could determine the growing tendency. The smallest growing was Cacanska lepotika/Mirobalan.
In the flowering the grafted flowered in rich, excepted the Topfive cultivar on St Julien A, St Julien GF 655/2, and Fereley rootstocks, these didn’t flowered. The Topfive/Wavit combinations there were a richest flower.
In the harvest term we could pick up plum fruits from Topfive/Wavit combinations, and Cacanska lepotica, Jojo, Toptaste cultivar. And in addition the Topper cultivar was the highest yield on their all of rootstocks. -
Evaluating of soil sulphur forms changes in long-term field experiments of Látókép
71-76Views:152The aim of this work was to evaluate the changes of different sulphur forms (soluble, adsorbed) in chernozem soil in a long-term field experiment supplied with increasing doses of NPK fertilizers for a long time. In addition, other objective of this study included the examination of the applicability of recommended extractants of the different sulphate fraction in Hungarian soils. A long-term field experiment was established at the Research Station of Látókép of the University of Debrecen in 1984. In addition to control, two levels of NPK fertilizer doses have been used with irrigated and non-irrigated variants. Winter wheat and corn were cropped in a crop rotation on plots. Soil samples were collected in three different development stages of winter wheat, at the stage of stem elongation (April), flowering (May) and ripening (June of 2018) from the topsoil (0–20 cm) of experiment plots. Water-soluble inorganic sulphate was extracted with 0.01M CaCl2 solutions. The soluble plus adsorbed sulphate was extracted with 0.016M KH2PO4 solution. Sulphate was measured by turbidimetric method. 0.01M CaCl2-SO42— ranged between 0.293–1.896 mg kg-1 and the 0.016 M KH2PO4-SO42- varied between 5.087–10.261 mg kg-1. The values of KH2PO4 SO42- was higher than that of CaCl2-SO42-, because KH2PO4 extracted the adsorbed and soluble fractions of sulphate, while CaCl2 extracted the soluble sulphate fraction. The amount of absorbed sulphate was calculated by the differences of KH2PO4- SO4 and CaCl2-SO4. The KH2PO4 characterizes mainly the adsorbed sulphate fraction much more than the water-soluble fraction. KCl is the most widely used extractant for the determination of plant available sulphate content of soil in Hungary; therefore, KCl-SO42- fraction also was determined. The KCl-SO42- ranged between 0.328–2.152 mg kg-1. The CaCl2-SO42- and KCl-SO42- fractions were compared and based on Pearson's linear correlation, moderate correlation was established (r=0.511) between them. In all three extractant (0.01M CaCl2, 1M KCl, 0.016 M KH2PO4) higher sulphate fractions were measured in the fertilized plots where superphosphate had been supplied for ages until 2010. The arylsulphatase activity of soil also was determined and ranged between 9.284 and 26.860 µg p-nitrophenol g-1 h-1. The lowest value was observed in the treatment with highest NPK2 dose, both in irrigated and non-irrigated areas.
-
Mass occurrence of a Phoma-like fungus on common ragweed (Ambrosia artemisiifolia) in Hajdúság region, East Hungary
55-60Views:206Common ragweed (Ambrosia artemisiifolia L.) is one of the most important, allergenic weed species in Hungary. A. artemisiifolia invades both a broad range of often disturbed areas (brownfields) and either undisturbed ones like waste lands, roadsides, riverbanks and railway tracks. In field crops it can cause considerable yield losses mainly in sunflower, maize, cereals and soybean. In Hungary many inhabitants suffer from allergy caused by Ambrosia pollen which results a serious human-health risk. The aim of the control is to prevent flowering and seed propagation of A. artemisiifolia. Until now the occurrence of numerous pathogenic fungi which attack common ragweed plants have been identified in Hungary, however there is not yet available biological weed control program because of shortage in acceptable effectiveness, and endangering cultural plant species. During our weed surveys in the region of Hajdúság (East-Hungary) we found numerous common ragweed plants showing heavy necrotic lesions on leaves and stems. The objective of this study was to identify the fungus which was isolated from diseased tissues of common ragweed (A. artemisiifolia). The identification of fungus based on morphological characters of colonies and features of conidia and chlamydospores developed on malt extract agar (MEA) plates. After examination of axenic cultures we revealed that the fungus isolated from the leaves ands stems of common ragweed was a Phoma-like species.
-
Crop Load, Fruit Thinning and their Effects on Fruit Quality of Apple (Malus domestica Borkh.)
29-35Views:286Crop load, a quantitative parameter used by industry, is generally defined as the number of fruit per tree. It is often expressed in terms of number of fruit per trunk cross-sectional area (fruit/TCSA). Crop load is the most important of all factors that influence fruit size, and the removing of a part of the crop is the most effective way to improve fruit size.
The potential size of a given pome fruit is determined early in the season and growth proceeds at a relatively uniform rate thereafter. This uniform growth rate permits the accurate prediction of the harvest size of the fruit as early as mid-summer. The growth rate, once established, is not easily altered, and fruit numbers, therefore, can affect fruit size only within definite limits and maximum effectiveness requires adjustment in fruit numbers relatively early in the season. It was established, that „thinning does not change a potentially small fruit into a large fruit, but rather insures that a potentially large fruit will size properly.” Emphasis should be on estimating fruit numbers rather than fruit size.
Fruit thinning can quickly reach the point of diminishing returns. Rather than a high percentage of large fruits, the objectives of thinning should be the elimination of the smallest fruits, improved fruit quality and annual production. Fruit thinning is accomplished by hand or chemical thinning. Chemical thinners are separated into categories as bloom thinners and post-bloom thinners. Early removal of potential fruit (blossom thinning) is currently used in many apple producing areas to enhance flower initiation for next year’s crop and thus, return bloom. It also results in reduced competition for photosynthates. Blossom thinners usually have a caustic effect on floral parts.
The amount of fruit left on a tree should be determined by the vigor and general condition of the tree. Leaf area per fruit affects the number of spurs flowering the following season. It can be difficult to separate timing and fruit number effects in crop loading studies, as abscission rates after hand thinning of retained flowers/fruitlets tend to very with the time of hand thinning.