Search
Search Results
-
Effects of plant density on photosynthetic characteristics and yield of maize under irrigation condition
115-118Views:280Maize plant response to plant density is an essential agrotechnical factor used for determining grain yield. Three plant densities (60,000 ha-1, 72,500 ha-1, and 85,000 ha-1) were used in this study to ascertain the effect of photosynthetic parameters and grain yield. Results show a significant difference in the photosynthetic parameters (SPAD, NDVI, LAI) and plant height for plant density of 85,000 ha-1. Grain yield and stem diameter were not significantly affected between the different plant densities.
-
The response of sunflower hybrids to different plant densities on a chernozem soil
123-128Views:147In our experiment the reaction of six sunflower hybrids of different genotypes (NK Oktava, ES Biba, ES Diagora, ES Ballistic, EGH 8925, PR 64 H 42) towards plant density has been investigated by different fungicide treatments in the crop-year of 2011 on a chernozem soil.
In the crop-year of 2011 sunflower populations were infected by a significant Diaporthe helianthi disease. The extent of this infection was significantly enhanced by the increment of plant density. However, regarding the average of the hybrids and plant densities the two times executed fungicide treatment has decreased the infection rate by 22%. The most susceptible hybrid was the ES Biba. Contrarily, the hybrid ECH8925 proved to be the most resistant hybrid towards this
disease according to our results. According to the results of the Pearson’s correlation analysis it has been revealed that stalk breakage and Diaporthe infection stand in a very close (r=0.782**) and middle close (r=0.523**) correlation resp. with plant density. The relationship between fungucude treatments and stalk breakage, just as Diaporthe infection showed to be middle and close respectively. Our results demonstrate the role of stalk and plate diseases (among them Diaporthe) in causing stalk breakage, for we have found a close positive correlation between stalk breakage and Diaporthe infection (r=0.624**) in our analysis.
From the aspect of yield amount the optimal plant density varied between 45 000 and 55 000 plants per hectare. Fungucude treatments enabled not only the use of higher plants densities, but they had a yield increasing effect as well. In the crop-year of 2011 the highest yield (4 559 kg ha-1) on a chernozem soil has been measured in case of the hybrid ECH8925. -
Effect and interaction of crop management factors and crop year on the yield of maize (Zea mays L.)
31-41Views:186The aim of this study was to determine the combination of treatment levels of crop management factors which can optimize and sustain maize yield under varying climatic conditions. The effect of winter wheat forecrop, three tillage systems (Mouldboard-MT, Strip-ST, Ripper-RT), two planting densities (60,000 & 80,000 plants ha-1), three fertilizer levels (N0-control, N80, N160 kg ha-1) with four replications in irrigated and non-irrigated treatments were evaluated over a five year period, 2015–2019. The obtained results revealed that growing season rainfall positively correlated with yield, whereas, temperature negatively correlated with yield. Impact of adverse weather on yield was less severe in biculture, irrigated plots, at lower planting density (60,000), lower fertilizer rate (N80) and in RT and ST, compared to MT. In years with favorable rainfall, yields of MT and RT were significantly (P<0.05) higher than ST. However, in a less favorable year, such as 2015, with 299 mm growing season rainfall and the lowest July rainfall (59% below mean) there was no significant difference (P>0.05) in yield among the three tillage treatments. Higher planting density (80,000), and fertilization rate (N160) in tandem with MT are treatments combination conducive for high yield under favorable climatic conditions, whereas, in years with low rainfall and high temperatures, RT and ST offer alternative to MT for optimum yield with 60,000 plants ha-1 and N80 treatment level. Crop year effect accounted for 20.7% of yield variance, fertilization 35.8%, forecrop 12.8%, plant density 3.4%, tillage 1.2% and irrigation <1%. It is conclusive that with proper selection of the appropriate levels of agrotechnological inputs the adverse effect of weather on yield can be mitigated.
-
Studies of plant density increase – on maize hybrids of various genotypes on chernozem soil
87-92Views:137The yield and crop safety of maize are influenced by numerous ecological, biological and agrotechnical factors. It is of special importance to study one of the agrotechnical elements, the plant density of maize hybrids, which is influenced by the growing area conditions and the selected hybrid.
We have investigated the effects of three different plant numbers (50 thousand plants ha-1, 70 thousand plants ha-1 and 90 thousand plants ha-1) on the yield of 12 maize hybrids of different genotypes in Hajdúság, on calcareous chernozem soil, in the Látókép Research Farm of the University of Debrecen, Centre for Agricultural Sciences, in 2013. The experiment was set in four replications, besides commonly applied agrotechnical actions. In the experiment, 1 hybrid of very early (Sarolta), 9 of early (P 9578, DKC 4014, DKC 4025, P 9175, NK Lucius, Reseda, P 37N01, DKC 4490, P 9494) and 2 of medium (Kenéz, SY Afinity) maturation were used.
With the increase of the plant number, the number of individuals per unit area increases. According to our experimental results, we have concluded that with the increase of the plant number, the yield increased in the average of the hybrids. In the average of the hybrids, in the case of 50 thousand plants ha-1, the yield was 13 130 kg ha-1, in the case of 70 thousand plants ha-1, it was 13 824 kg ha-1, while in the case of 90 thousand plants ha-1, the yield became 13 877 kg ha-1.
In addition to plant density increase, it is necessary to determine the optimal plant number that is the most favourable for the certain hybrid under the given conditions. To fulfil this aim, we have determined the optimal plant number corresponding to the maximum yield of the given hybrid, within the given plant number range. The optimal and applied plant numbers differ, since the optimal one could only be applied under ideal conditions. Since the agrotechnical actions cannot always be carried out in appropriate quality and one has to adapt to the weather conditions, thus we have determined a plant number range in the case of each hybrid. The hybrids were classified into categories of producible in narrow and broad plant number range.
-
Economics of site specific crop density in precision sunflower (Helianthus annuus L.) production
91-96Views:66In this research, the crop density of sunflower was examined, which, thanks to the tools available for precision crop production and knowledge of the market environment of sunflower production, best fits the heterogeneous areas of the given production zones and meets the economic requirements. These components together directly influence the effectiveness of sunflower production. In the year of 2021 and 2022, we carried out a site-specific crop density sunflower experiment in two fields with the same soil type, by sowing significantly different amounts of seeds within the given zones. We have established that the sunflower, although a plant with excellent adaptability, reacts sensitively to the place of production and the effect of the year, in zones with heterogeneous productivity, and shows a reaction to sowing with a variable number of seeds per zone, even when examined based on economic aspects.
-
Development of maize production technology that increase the efficiency of bioethanol production
17-26Views:82Maize is one of the most important crops worldwide and also in Hungary, it can be utilized for multiple purposes: as a feedingstuff, for human nutrition and for industrial processing. In the last decades, the per ha yield of maize varied greatly in Hungary, between 2004 and 2006, it was 6.82-7.56 t/ha, while in 2007, it was only 3.6 t/ha. Resulting from this, the price of maize became 2-2.5 times higher. The high price hinders bioethanol production. The largest per ton amount of bioethanol, 387 l, can be produced from maize.
In addition to its classical utilization as feed and food, the industrial use (especially for bioethanol production) of maize is increasin.
For industrial production, a new production technology is needed. I tested and selected hybrids appropriate for this purpose and set up fertilization and plant density experiments. The experiment were set up on chernozem soil in 2007.
The applied fertilization treatment was N 120, P2O5 80 uniformly, and five different dosages of potassium: K2O 0, K2O 100 (KCl), K2O 100 (Kornkáli), K2O 200 (KCl), K2O 200 (Kornkáli) kg/ha active ingredient. The applied plant densities were 40, 50, 60, 70, 80, 90 thousand plants/ha.
The yield of maize hybrids in the fertilization experiment ranged between 10.53 – 14.62 t/ha. Both regarding the form and dosage, 100 kg/ha Kornkáli proved to be the best potassium treatment. Regarding the inner content parameters, the highest starch content in the average of treatments was obtained for the hybrid PR36K67: 73.57%, and its yield was also the highest, so this hybrid proved to be the most suitable for bioethanol production. The highest protein content was observed for the hybrids KWS 353 (12.13%), which can be favourable for feeding purposes.
Most of the hybrids gave the highest yield at 80 thousand plants/ha plant density, however, hybrids PR36K67 and Mv Tarján achieved the highest yield at 90 thousand plants/ha.
In bioethanol production, the selection of a high-yielding hybrid with high starch content, a slight reduction of N, increase of potassium, the application of the highest plant densities of the optimum interval, harvest at full maturity (when starch content is the highest compared to protein content) are of great importance. -
Study of plant physiological parameters in winter oilseed rape (Brassica napus var. napus f. biennis L.) production on chernozem soil
111-115Views:185We made plant physiology examinations in Arkaso winter oilseed rape hybrid substance: relative chlorophyll content (SPAD) and leaf area index (LAI) measurements. The experiment was set in University of Debrecen Agricultural Sciences Center at Látóképi Experimental Station in four replications, in two different sowing times (I. sowing date on 08/22/2014 and II. sowing date on 09/09/2014 sowing againhappened because of the incomplete germination in the second subtance 01/10/2014) Three different plant density 200, 350 and 500 thousand ha-1, under the same nutrient supply, 45 cm row spacing. The experiment was green crop of winter wheat. The relative chlorophyll content (SPAD) and leaf area index (LAI) measurements were made in seven different times. We measured the maximum value of chlorophyll content in the first sowing time at 500, and the second sowing time at 350 thousand ha-1 plant density. The measurement results proved that there was a linear relationship between the number of plants and the LAI. The maximum leaf area index values we measured in both the sowing time at 500 thousand ha-1 reached.
-
Allelopathic Effect of Italian Cocklebur on Sugar Beet
74-77Views:79Cockleburs are noxious weeds in Hungary, where they are widespread in row crops, especially in maize, sunflower and sugarbeet. A low density population of these weeds may be harmful because of their large competitive ability, fast growth in early phenological stages, allelopathy, and persistant sprouting.
Allelopathy of Xanthium italicum Mor. was examined during the growing season in 2004. Root and shoot samples were collected at 4 or 5 leaves stage (in the end of May and in the beginning of June) and before flowering (in the beginning of July) before and after rain. Extracts were made in tap water. The test plant was Beta vulgaris L.; its germination, root and shoot growth were evaluated at the 6th and 10th days after treatment.
Most of extracts inhibited the germination of sugar beet. In these experiments the phenological stage of the donor plant determined slightly the effectiveness of the extracts on sugar beet. Generally, significant differences existed between treatments only in cases of concentrated extracts.
Rainfall can modify the inhibitory effect of extracts (especially shoot extracts). Shoot extracts of young plants inhibited stronger germination and growth after rain than before rain. Density of cockleburs influenced the effect of extracts, as well. Generally, differences between the efficacy of extracts was larger after rain.
The results supported the hypothesis that the phenological stage and some environmental factors can modify allelopathy of cockleburs. -
The scientific background of competitive maize production
33-46Views:274The effect and interaction of crop production factors on maize yield has been examined for nearly 40 years at the Látókép Experiment Site of the University of Debrecen in a long-term field experiment that is unique and acknowledged in Europe. The research aim is to evaluate the effect of fertilisation, tillage, genotype, sowing, plant density, crop protection and irrigation. The analysis of the database of the examined period makes it possible to evaluate maize yield, as well as the effect of crop production factors and crop year, as well as the interaction between these factors.
Based on the different tillage methods, it can be concluded that autumn ploughing provides the highest yield, but its effect significantly differed in irrigated and non-irrigated treatments. The periodical application of strip tillage is justified in areas with favourable soil conditions and free from compated layers (e.g. strip – strip – ploughing – loosening). Under conditions prone to drought, but especially in several consecutive years, a plant density of 70–80 thousand crops per hectare should be used in the case of favourable precipitation supply, but 60 thousand crops per hectare should not be exceeded in dry crop years. The yield increasing effect of fertilisation is significant both under non-irrigated and irrigated conditions, but it is much more moderate in the non-irrigated treatment.
Selecting the optimum sowing date is of key importance from the aspect of maize yield, especially in dry crop years. Irrigation is not enough in itself without intensive nutrient management, since it may lead to yield decrease.
The results of research, development and innovation, which are based on the performed long-term field experiment, contribute to the production technological methods which provide an opportunity to use sowing seeds, fertilisers and pesticides in a regionally tailored and differentiated way, adapted to the specific needs of the given plot, as well as to plan each operation and to implement precision maize production.
-
The impact of crop year and certain agrotechnical factors on maize yield
13-16Views:113The experiment was set up with eight maize hybrids with different genetic characteristics in 2012. In our study were included hybrids with different length of growing season. We studied the effect of NKP fertilization and plant density on the yield. Comparing to controll treatment it was found that highest yield was at N40+PK treatment. It was three times higher than agro-ecological optimum. Due to the droughty year the effect of plant density it was minimum. The development rate in case of sowing date I. and II. showed an almost identical picture in the scope of the sowing date trial. However, hybrids with excellent adaptability were capable of a yield above average even in this extreme year.
-
Study on the weeds of maize in the infected field with Cirsium arvense (l.) scop.
131-135Views:111The aim of our research was to establish the difference between the weed flora of maize hybrids sown in different times. Our field trial has been performed nearby Szombathely on a field of an agricultural farm, where two different hybrids were grown. The cold tolerant hybrid was sown at the end of March; the traditional hybrid was sown at the end of April. During the vegetation weed survey was conducted on 4–4 model parcels at two times in case of both hybrids. Cirsium arvense gave the largest weed cover in both hybrids. In cold tolerant hybrid gave 4.53%, in the traditional hybrid gave 56.63% weed cover. Considering the number of shoots per square meter C. arvense was also dominant with 64 plant m-2 density in early sown maize and 49.5 plant m-2 in traditional maize hybrid. At the time of the second weed survey the number of weeds increased significantly. The shoot number of C. arvense in cold tolerant hybrid was almost one and a half times more than at the first evaluation, while in case of the traditional hybrid it is nearly doubled. According to the weed density assessment there were differences between the two hybrids in the rate of G3 and T4 weeds. In early sown maize hybrid (MT Milo) this rate was 50–50% while in traditional hybrid was 90–10%. On 26th June the density of the weeds in the cold tolerant hybrid was two times higher than in the traditional one (Kamelias). Based on the experimental results it can be stated that the effective weed control in cold tolerant, early sowing maize hybrids is very important too.
-
Effect of cultivation factors on the yield and yield security of maize
263-265Views:119Cultivation factors have a significant effect on the yield and yield security of maize. Ensuring a suitable green crop is important. Tricultural crop rotation (pea–wheat–maize) in the average of 25 years provided a 2 t ha-1 higher yield compared to monocultural cultivation. A harmonious NPK nutriment supply determines yield and yield security, which can be especially realized by means of the application of precision cultivation technologies. Under average circumstances N 80 kg ha-1, P2O5 50 kg ha-1, K20 60 kg ha-1 active ingredient is the agro-ecological dosage of artificial fertilizer.
Plant density is a factor that determines yield. Optimal plant density – beside the genetic characteristics of the hybrid – is mostly influenced by the level of water and nutriment supply. -
Effect of sowing technology on the yield and harvest grain moisture content of maize (Zea mays L.) hybrids with different genotypes
17-22Views:118From the aspect of the efficiency of maize production harvest grain moisture content shall be considered beside the amount of harvested grain yield. Hybrids with different genotypes and vegetation period length lose their moisture content different that is affected by row spacing and plant density – among agrotechnical production factors – depending on the given crop year. In the present research work three crop years with different weather conditions were studied (2013, 2014, and 2015). The small-plot field experiment was set up at the Látókép Field Research Centre of the University of Debrecen, Centre for Agricultural Sciences with four replications on a chernozem soil type. The effect of three factors was analysed in the experiment on yield amount and its moisture content. Factors were row spacing (45 and 76 cm), plant density (50, 70 and 90 thousand plants ha-1), while hybrids were of very early (Sarolta: FAO 290), early (DKC 4014: FAO 320, P 9175: FAO 330, P 9494: FAO 390) and medium (SY Afinity: FAO 470) ripening.
In the crop year of 2013 the highest yield was produced – regarding the average of the hybrids – by the application of a row spacing of 45 cm (4.5%, 673 kg ha-1), however there was no significant difference between the yield of the populations of different row spacings. Significant difference (14.9%, 1751 kg ha-1; 6.3%, 583 kg ha-1) could be found in case of yield between different row spacing applications in 2014 and 2015. The effect of insufficiently distributed low amount of precipitation and lasting heat days in 2015 could be revealed in yield amounts and harvest grain yield moisture content results that were lower than in the previous years. In 2015 grain yield moisture content varied between 10.3 and 13.9% in case of a row spacing of 45 cm, while by 76 cm between 11.0 and 13.9%.
-
Determining elements of variety-specific maize production technology
157-161Views:62Our aim was to work out such new maize fertilizer methods and models which can reduce the harmful effects of fertilization, can
maintain the soil fertility and can moderate the yield fluctuation (nowadays 50-60 %).
The soil of our experimental projects was meadow soil. The soil could be characterized by high clay content and pour phosphorus and
medium potassium contents. In the last decade, out of ten years six years were dry and hot in our region. So the importance of crop-rotation
is increasing and we have to strive for using the appropriate crop rotation.
The yields of maize in monoculture crop rotation decreased by 1-3 t ha-1 in each dry year during the experiment (1983, 1990, 1992,
1993, 1994, 1995, 1998, 2000, 2003, and 2007). The most favourable forecrop of maize was wheat, medium was the biculture crop rotation
and the worst crop rotation was the monoculture.
There is a strong correlation between the sowing time and the yield of maize hybrids, but this interactive effect can be modified by the
amount and distribution of precipitation in the vegetation period. At the early sowing time, the grain moistures were 5-12 % lower compared
to the late sowing time and 4-5 % lower compared to the optimum sowing treatment.
There are great differences among the plant density of different maize hybrids. There are hybrids sensitive to higher plant density and
there are hybrids with wide and narrow optimum plant densities.
The agro-ecological optimum fertilizer dosage of hybrids with a longer season (FAO 400-500) was N 30-40 kg ha-1 higher in favourable
years as compared to early hybrids.
We can summarize our results by saying that we have to use hybrid-specific technologies in maize production. In the future, we have to
increase the level of inputs and have to apply the best appropriate hybrids and with respect to the agroecologial conditions, we can better
utilize the genetic yield potential. -
Researches regarding the influence of the some technological elements on water use efficiency in maize from Crisurilor Plain
5-9Views:135Plain and the influence of the hybrid, plant density, crop rotation, nutrient supply, weeds and irrigation on water use efficiency were studied.
Choosing of the hybrid with the best water use efficiency is very important because a hybrid from 500–600 FAO group (Fundulea 376) in unirrigated conditions and a hybrid from FAO group over 600 (Fundulea 365) obtained the biggest water use efficiency; the hybrid Fundulea 365 obtained the highest irrigation water use efficiency, 20.1 kg yield gain 1 mm-1 irrigation water.
One of the most known hybrid in the area is Turda super and the highest water use efficiency was obtained using the plant density of 55 000 plants/ha in unirrigated variant and 70 000 plants/ha in irrigated variant. The highest irrigation water use efficiency, 20.7 kg yield gain 1 mm-1, was obtained at 70 000 plants ha-1.
In maize monoculture was obtained the lowest values of the water use efficiency in unirrigated and irrigated variant: in the wheat-maize crop rotation the values were higher than in maize monoculture and in the wheat-maize-soybean were registered the highest values. The same situation was registered regarding the irrigation water use efficiency.
Farm manure (30 t ha-1) and especially manure (30 t ha-1) +chemical fertilizers (N90P45) determined a higher values of the water use efficiency in comparison with the control. In the variant with organic + mineral fertilization was registered the higher value (19.4 kg yield gain mm-1) of the irrigation water use efficiency.
Water use efficiency was much lower in the variant with weeds in comparison with the variant without the weeds; the differences were of 69% in unirrigated variant and of 64% in irrigated variant, very significant statistically. Irrigation water use efficiency from variant with weeds was lower than the value registered in the variant without weeds; the difference (68%) was very significant statistically.
In average in period 1976–2012, the irrigation determined the increasing in water use efficiency with 22%, 19.4 kg mm-1 vs. 15.8 kg mm-1, but not in all the years caused the irrigation increasing in water use efficiency in comparison with unirrigated maize.
The results research emphasized the need of the optimization for technology elements studied and a better water use efficiency will be obtained.
-
The effect of NPK fertilization and the plant density on maize yield and bioethanol production
13-18Views:88For industrial (bioethanol) production of maize, a new production technology is needed. I tested and selected hybrids appropriate for this purpose and set up fertilization and plant density experiments. The experiment were set up on chernozem soil in 2008.
In bioethanol production, the selection of a high-yielding hybrid with high starch content, a slight reduction of N, increase of potassium, the application of the highest plant densities of the optimum interval, harvest at full maturity (when starch content is the highest compared to protein content) are of great importance. -
Effect of PRPSOL soil conditioner on the physical status of the soil in conventional and reduced tillage systems
109-113Views:195The effect of PRP-SOL soil conditional on soil compaction, moisture content and bulk density is studied in a long-term soil cultivation experiment from 1997 on a heavy textured meadow chernozem soil, in reduced and conventional tillage at Karcag Research Institute. Our investigations were made in the vegetation period of corn, in June and after harvesting, on stubble. Soil compaction was measured with a penetrometer, the actual moisture content was determined by gravimetric method. The bulk density values of the regularly cultivated soil layer of 0–10 and 10–20 cm depths were defined from undisturbed soil samples. We established that after 3 years the application of the soil conditioner has positive effect on soil compaction and moisture status of the top layer in the reduced tillage system. We could not figure out this positive effect in the case of conventional tillage.
-
Antioxidant density of Hungarian kapia and red bell pepper varieties
80-84Views:128There is a lot of evidence that the pepper is one of the most important sources of vitamin C. Albert Szent-Györgyi was the first to extract ascorbic acid from a red bell pepper in the 1930s. Previously people had eaten vitamin C on the long voyage to protect against scurvy. Vitamin C is an important antioxidant, and it is a cell protector today. Vitamin C protects the cardiovascular system against infection. This vitamin decrease blood-pressure, a raises the HDL cholesterol level (good), and inhibits gout.
„Antioxidant density” is a biological value indicator obtained in synthetic way. „Antioxidant density” indicates the antioxidant capacity of a particular food, e. g. fruits and vegetables, related to 1 Calorie. In our study, we measured the total antioxidant capacity, vitamin C content and „antioxidant density” of Hungarian paprika varieties. -
Challenges and limtations of site specific crop production applications of wheat and maize
101-104Views:120The development and implementation of precision agriculture or site-specific farming has been made possible by combining the Global Positioning System (GPS) and the Geographic Information Systems (GIS). Site specific agronomic applications are of high importance concerning the efficiency of management in crop production as well as the protection and maintenance of environment and nature. Precision crop production management techniques were applied at four locations to evaluate their impact on small plot units sown by wheat (Triticum aestivum L.) and maize (Zea mays L.) in a Hungarian national case study. The results obtained suggest the applicability of the site specific management techniques, however the crops studied responded in a different way concerning the impact of applications. Maize had a stronger response regarding grain yield and weed canopy. Wheat was responding better than maize concerning plant density and protein content performance.
-
Host plant preference of Metcalfa pruinosa (Say, 1830) (Hemiptera: Flatidae) in the north of Hungary
84-95Views:214Citrus flatid planthopper, a native insect to North America had for a long time a scarce economic importance there. However, being polyphagous made little damage on citrus trees and some ornamentals. In 1979 it was introduced to Italy where it established and spread quickly. It is now an invasive alien species continually spreading in South and Central Europe causing considerable damage in fruit crops and various ornamentals. Present study shows the results of a series of observations carried out from 2011 to 2015 at a number of habitats in north of Hungary. The pest could be found at each habitat but the hedge, the tree row, the gardens and the orchard/vineyard were the most infested. Frequency and population density of Metcalfa pruinosa were considerable on Asteraceae, Cannabaceae, Fabaceae, Juglandaceae, Lamiaceae, Rosaceae and Sapindaceae. Typical vegetation could be functionally classified as ornamental plants, trees/shrubs, fruit plants, weeds and feral plants. Feral plants – some of them also invasive alien species – were found at each habitat. Plant species native to America were among them the most populated. As the hedgerows were neglected, and most gardens, orchards and vineyards abandoned, these are excellent conditions for the quick and long-lasting establishment of the pest as well as they may be reservoirs to infest cultivated fruit crops and ornamentals. The hedgerow was situated along a railway line. The length of similar hedges can be merely in Pest county several hundred km, which means M. pruinosa has plenty of opportunity for spreading along the railway and infest agricultural and ornamental cultures. On the surveyed alfalfa and maize fields, accidentally very few nymphs and adults were observed. Although, the population density of M. pruinosa was considerable on many hostplants, economic damage or yield losses could not be detected. Economic or significant damage was observed only on roses, raspberries and stinging nettle. This later is cultivated in Germany and Finland. The applied horticultural oil was efficient.
-
The bioactive compounds of sour cherry (Prunus cerasus) with special regards to antioxidant activity and antioxidant density
83-87Views:165Evidence suggests that a diet high in fruits and vegetables may reduce the risk of chronic diseases, such as cardiovascular disease and cancer, and phytochemicals including phenolics, flavonoids and carotenoids from fruits and vegetables may play a key role in reducing chronic disease risk. Recent research has proven that sour cherry (Prunus cerasus L.) is a valuable natural source of some bioactive compounds important in human health preservation.
In our work, we identified the total antioxidant capacity and ”antioxidant density” of sour cherry varieties named ”Újfehértói fürtös”, ”Debreceni bõtermõ”, ”Kántorjánosi” and ”Érdi bõtermõ” and those of the ”Bosnyák” sour cherry clones. ”Antioxidant density” is a biological value indicator obtained in a synthetic way, which indicates the antioxidant capacity of the particular food, e. g. fruit and vegetable, per 1 Calorie. -
The effect of sowing date and plant density of winter oilseed rape (Brassica napus var. napus f. biennis L.) population
213-215Views:160The experiment has been set up in the University of Debrecen Látókép Experimental Station in three different years (2014, 2015 and 2016), three different plant densities 200, 350 and 500 thousand ha-1, four replications of the same nutrient supply with using a line spacing of 45 cm. In the experiment, the fore crop was winter wheat in each year. The amount of weeds was observed five times in the last experimental year (2016/2017). In the three experimental years, the highest yield was harvested from the early sowing plot with the highest plant density. On the basis of the Pearson’s correlation analysis there was significant negative correlation (r=-0.583) between the effect of the annual year and yield of the hybrid.
-
The role of Debrecen maize hybrids in competitive production
19-21Views:60I examined the effects of plant density and fertilisation on the yield of the maize hybrid Debreceni 377 SC, developed by the Agrárgazdaság Ltd., using the 3 year data sequence of a long term experiment set up at the Látókép experimental station of DU Center for Agricultural Sciences in years with average precipitation supply.
Based on the evaluation of my research results, I found that the application of higher plant densities was more favourable in years with average or higher than average precipitation supply. During the examination of fertilisation effects, it was verified that surplus yield was realised in most cases where smaller fertilisation dosage, 120 kg per hectare active substance was applied. -
Occurrence and damage of the alfalfa root longhorn beetle (Plagionotus floralis Pallas, 1773) in old alfalfa stands in Hungary
82-88Views:92The alfalfa root longhorn beetle is a pest of small importance in old alfalfa stands. It is rarely cited in the international, national literature, or even mentioned in specialized manuels. Plagionotus floralis is common in Hungary but its population density is low. It is a polyphagous species but it has importance - regarding the references – only in alfalfa. This paper analyses data gained in old alfalfa fields at two different regions of the country (Máriabesnyő, Debrecen). Damage of P. floralis was 56% in the roots of an 8-year-old stand in Máriabesnyő. Lenghts of tunnels were between 3 and 22 cm. In spite of the tunnels the alfalfa plants were viable. There was no root longhorn beetle in the 15-year-old Debrecen stand, however it has been found former in the region. The reason for the important density of P. floralis in Máriabesnyő could be the considerable diversity and covering of flowering weeds around the field. Adults of P. floralis feed on flower pollen and nectar. As to the Debrecen area,weeds were cut regularly, so the edge vegetation was poor. Present conditions (no pest control on alfalfa fields, overuse of old and failing alfalfa stands, many untrained growers) favour the reproduction and possible damage of alfalfa root longhorn beetle.
-
Optimization of Density of Sugar Beet (Beta vulgaris L.) Production Quotas by Pointwise Geostatistic Methods
46-50Views:81The regional distribution of the Hungarian sugar beet production quotas was developed by the conventional concurrency relationships. In our research we analyzed 320 sectors of 9 factories with geostatistic methods in a GIS environment. The applied researches of spatial mean, spatial deviation, deviational ellipse have been introduced by us in this speciality. We used two different methods in our optimization inquiries, where the spatial segment of the standard deviational ellipse was based on a more robust preliminary data processing solution, and this is why it is a less parametricable method. The inquiry of the spatial buffer zones in production sectors ensures an obvious optimization possibility. We considered the supply route distances in both cases as a modeling boundary condition. Our results show that we introduced an effective decision making method to the occurent replanning of the production sectors with the pointwise density inquiries and the geometric analogy that was fitted to it.