Search

Published After
Published Before

Search Results

  • The Effect of Sowing Time and Plant Density on the Yield of MaizeHybrids
    95-104
    Views:
    71

    The crop technology of maize has two important elements, sowing time and plant density. In 2003 and 2004 we studied the effect of these two factors on the growth and production of maize in an experiment carried out near Hajdúböszörmény.
    The soil of the experimental plots was meadow soil.
    Weather in both years was differed greatly. 2003 was drought. Neither the distribution nor the quantity of the precipitation were suitable in the growing season for maize. This fact basically determined the results.
    In 2004, we could talk about a favorable and rainy season. The distribution and quantity of precipitation was suitable between April and September. The average temperature was also suitable for maize.
    Results of the sowing time experiment:
    In 2003, we tested seven hybrids at four sowing times. Hybrids in the early maturity group gave the highest yield at the later sowing time, while the hybrids of the long maturity group gave it at the earlier planting time. The yield of PR34B97, PR36N70, PR36M53 hybrids was the best at every planting time. The moisture loss of hybrids in the late maturity group was faster in the maturity season, but the seed moisture content was higher than the hybrids with early sowing time. The seed moisture content was very low due to the droughty year. In two hybrid cases, this value was higher than 20% only at the fourth sowing time.
    In 2004, we examined the yield and seed moisture content of nine hybrids. In the favorable crop year, the yield of every hybrid was the highest at the second and third sowing time. Yields of PR34H31 and PR38B85 hybrids were significant. The seed moisture content at harvest was higher than the previous year due to the rainy season. In the case of hybrids sown later, this value was higher by 30%. However, we noticed that this value was lower at the earlier sowing time than at the later.
    The crop year had a more dynamic effect on maize than the sowing time. First of all, the quantity and distribution of precipitation played an important role in respect to yield safety.
    Results of the plant density experiment:
    We tested the reaction of hybrids at four plant densities (45,000, 60,000, 75,000 and 90,000 stock/ha) every two years. In 2003, the tested seven hybrids reached the highest yield at the 90,000 stock/ha in the face of a droughty year. The effect of forecrop and favorable nutrients caused these results. In the rainy 2004 year, the yield grew linear with the growing plant density. The yield of the best hybrids were 14-15 t/ha at the 90,000 stock/ha.
    Such a high plant density (90,000 stock/ha) couldn’t adaptable in farm conditions in rainy season. It is practical to determine the interval of plant density besides the optimum plant density of hybrids which gave correct yield. The farmers have to use the low value of this interval due to the frequent of the droughty years.

  • Examination of plant number and sowing date in different crop years
    79-82
    Views:
    99

    We examinated three agrotechnical factors in 2011, 2012 and 2013 (sowing time, nutrient factor and plant density), as well as five different effects of genotypes on the crop of corn, on brown soil in the Hajdúság. The experiment was set next to the 47 main road in Debrecen, at the 6th kilometre stone.

    In the present processing I would like to touch on the effects of sowing time and plant density, as I do not have the chance to present the whole experiment results here. It is true for all three years that the humidity factors differ from the long years’ average, so the genotypes had different reactions on it. According to our results we found out that the late sowing time’s result had the most successful crop yield result with 9975 kg ha-1, while examining the plant density the result of the highest plant density proved to be the best with 9967 kg ha-1.

    We take the critical season in corns’ life cycle process into consideration when examining the results: June, July and August months’ humidity and temperature markers. According to the results in the tested 3 months we had 227 mm humidity with 10 days, when the average temperature was over 25 °C. The same factors in 2012 were 135.5 mm humidity with 37 days of average temperatures of 25 °C and in 2013 we recorded 102.5 mm humidity with 24 of these days.

    Our goal is to help the farmers in the Hajdúság with the results of our sowing times, hybrid choice and plant density results.

  • Nutrient and water utilisation analyses of maize on chernozem soil in a long-term field experiment
    77-82
    Views:
    167

    We have conducted our research at the Látókép Research Farm of the University of Debrecen RISF Centre for Agricultural and Applied Economic Sciences during the cropyears of 2007, 2008 and 2009, on chernozem soil. In the case of crop rotation three models were set (mono-,bi- [wheat, maize] and triculture [pea, wheat, maize]). The five nutrient levels applied during the treatments were as follows: control [untreated], N60P45K45, N120P90K90, N180P135K135, N240P180K180. The conclusion of our results was the following: the crop rotation, the nutrient supply and the amount of precipitation all influenced the quantity of maize yield. As an effect of the increasing nutrient doses yield increase was experienced compared with the control treatments. In the average of the years the highest increase in yield excess/1 kg of NPK fertilizer was measured in the case of the monoculture (13 kg ha-1). As a consequence of is soil extorting effect the monoculture responded more intensively to the nutrient supplementation than the biculture or the triculture in the studied cropyears. In addition, we have observed that the three-year average yield amount per 1 mm precipitation was significantly influenced by the nutrient reserve of the soil. In the monoculture during the control treatment this value was 25 kg mm-1, the value measured in the case of the biculture turned out to be more favourable (42 kg mm-1).

  • The effect of sowing date and plant density on the yield of maize (Zea mays L.) under different weather conditions
    205-208
    Views:
    272

    Maize has high productivity and produces huge vegetative and generative phytomass, but this crop is very sensitive to agroecological (mainly to climatic, partly to pedological conditions) and agrotechnical circumstances. In Hungary, maize is grown on 1.1–1.2 million hectares, the national average yields vary between 4–7 t ha-1 depending on the year and the intensity of production technology. The longterm experiment was set up in 2015–2016 on chernozem soil in the Hajdúság (eastern Hungary). The maize research was set up on chernozem soil at the Látókép MÉK (Faculty of Agricultural and Food Sciences and Environmental Management) research area of the University of Debrecen. We examined the following commonly used hybrids of Hungary: SY ARIOSO (FAO 300), P9074 (FAO 310), P9486 (FAO 360), SY Octavius (FAO 400), GK Kenéz (FAO 410), DKC 4943 (FAO 410). The experiment was set up in three different plant densities. These were 60, 76, 90 thousand plant ha-1. The experiment was set up with three different sowing dates, early, average and late sowing. The yield was measured using a special plot harvester (Sampo Rosenlew 2010), measuring the weight of the harvested plot and also taking a sample from it. As a next step, we calculated the yield (t ha-1) of each plot at 14% of moisture content to compare them to each other. We evaluated the obtained data using Microsoft Excel 2015.

  • Adequate responses to plant protection policy
    33-35
    Views:
    69

    The head of crop protection in the Central Agricultural Office offers a survey of the lately reconstructured official structure, outlines the sections of Central Directorate, sketches the roles of County Government Bureaues. To keep the standard of knowledge changes are necessary to make in the higher education of plant protection specialists. The prersentation will concern the contacts between researches made on universities and agricultural official directorates. It is analized the regulation of present and future pesticide usage, the possible alternatives of reduced quantity pesticide usage including the application of Integrated Plant Management (IPM) as well. The tasks of national activity according to the EU direcives about sustainable pesticide usage touch the problems of plant protection machinery and environment safety. It is summarized the tasks of official directorate, chamber of crop protection specialists, moreover practice of plant protection for the nearest future.

  • The effect of production area on the development of yield producing factors of maize (Zea mays L.) hybrids of different genotypes
    67-72
    Views:
    125

    Maize yield amount development is determined by the given crop year and the genotype of the applied hybrid, but beside these also by the applied agrotechnical factors, in particular by sowing technology. The development of yield amount and yield producing factors of five maize hybrids of different genotypes has been studied in a small-plot field experiment by the application of different row spacings and plant density variants. The production of the individual plants shows decreasing tendency parallel to the increasing plant density, however, this decrement is compensated by the higher number of plants per unit production area. Individual plant production is determined by the development of yield producing factors, such as the length and the diameter of cobs, just as by the thousand seed weight – that were studied in the present research work as well.

    In the present research work the decreasing row spacing resulted in a yield increment of 0.67 t ha-1 (4.53%) in 2013, while in contrast in 2014 yield was decreased by 1.75 t ha-1 (14.87%). The high amount of precipitation in March was determinant in 2013: it filled up the soil water stock and balanced the negative effect of the inadequate amount and distribution of precipitation during the vegetation period for the yield. Lower extent of yield increment (0.6 t ha-1) was registered in 2014 in case of the row spacing of 76 cm than in the previous year. In case of a row spacing of 45 cm the difference between the two crop years was 3.1 t ha-1. The highest impact on the yield production factors was found in all treatment combinations in case of the applied hybrid among the three studied treatment factors. In the crop year of 2014 the effect of plant density on cob diameter and thousand seed weight could be revealed as well. In case of the cob diameter significant difference was found between the plant densities of 70 000 and 90 000 plants ha-1, just as between the populations with densities of 50 000 and 90 000 plants ha-1. In case of the thousand seed weight significant differences could be found by the application of plant densities of 70 000 and 90 000 plants ha-1. The highest values of the studied yield producing factors were measured in case of the plant densities of 50 000 and 70 000 plants ha-1; increasing the plant density to 90 000 plants ha-1 resulted in rather decreasing values.

  • Biomass production estimation of processing tomato using AquaCrop under different irrigation treatments
    131-136
    Views:
    185

    The wiser usage of irrigation water is inevitable in the future. Irrigation has very high input cost; therefore, farmers must carry out irrigation with care. Also, the effect of irrigation on crops has a big role in decision making. Modeling provides a possibility to evaluate this effect. AquaCrop, as a crop production simulation model has great potential in this field. The accuracy of tomato biomass yield prediction of the model was tested in this research. For collecting the necessary data, a field experiment was conducted at Szarvas on processing tomato with different water supplies, such as 100% (I100), 75% (I75), 50% (I50) of potential evapotranspiration and a control with basic water supply (C). The relation of the simulation and actual biomass yields was evaluated during the season. Very good correlation was found between the modelled and the actually harvested data. The data for the control and I100 treatments showed higher correlation than the I75 and I50. The relationship for all of the data was moderately strong. Miscalculations occur mostly when the dry biomass yield reaches
    7 t ha-1. The accuracy of the model was evaluated with the use of mean absolute error (MAE) and root mean squared error (RMSE) values. The least error was found in the C treatment, which means 0.34 MAE and 0.45 t ha-1 RMSE. The simulation resulted in higher errors in the I75 and I50 treatments.

  • Evaluation of reduced tillage technologies in corn production based on soil and crop analyses
    47-54
    Views:
    122

    Despite new cultivation methods, the proportion of conventionally cultivated land is still very high in Hungary.
    Although these technologies demand more time, labour and fuel, they are still attractive to users because they require less professional skill and simple machinery. In Hungary, conventional tillage methods usually lead to soil deterioration, soil compaction and a decrease in organic content. These side effects have caused gradually strengthening economic and environmental problems.
    The technologies for those plants which are dominant on Hungarian arable lands use (winter wheat, maize, sunflower and barley) need to be improved both in the interest of environmental protection and the reduction of cultivation costs.
    The Department of Land Use at Debrecen University is cooperating with KITE Sc. to carry out soil tillage  experiments at two pilot locations to prove tillage technologies already used in the USA.
    The aim of our examination is to adapt new technological developments and machinery, and to improve them on Hungarian soil for local environmental conditions. With these improved machines, the field growing of plants could be executed by less manipulation and better suited to economic and environmental needs. The most significant task is to investigate and improve the conventional cultivation replacing, new soil-protecting tillage technologies, and to apply no-till and mulch tillage systems.
    On the basis of the experiments’ survey data, we established that the looseness and moisture content of the soil using reduced tillage is more favourable than after using conventional technologies. The results of no-till and shallow spring tillage are behind those of winter plough or disk ripper cultivation in corn yield and production elements.
    To preserve moisture content in the soil, the ground clearing and sowing while simultaneously performing no-till method presents the most favourable results. The surplus moisture gained using no-till technology is equal to 40 mm precipitation.
    Regarding the yield of winter wheat we established that the tillage methods do not affect plant yield. Both disk ripper and conventional disc cultivation showed nearly the same harvest results (5.55 or 5.5 t/ha), where the difference is statistically hardly verifiable from the no-till method. From the individual production of corn and the number of plants planted in unit area,  calculated results prove that no significant difference can be detected between the production of winter plough and disk ripper technology. Although the yield achieved with the no-till method is less than with the previously mentioned technologies, the difference is only 9-10%. We received the lowest production at shallow spring tillage.
    Evaluations have shown a 1.1 t/ha (13%) difference in the yield of maize, between winter tillage and the disk ripper method, in this case the traditional method resulted in higher yield. In winter tillage, the yield of maize was 1.9-2.1 t/ha (23-25%) higher than in the case of direct sowing and cultivator treatments. No significant difference could be noted between the yields of direct sowing and cultivator treatments.
    Our research so far has proved the industrial application of reduced tillage methods in crop cultivation technologies.

  • Physiological traits and yield of three soybean (Glycine max (L.) Merr.) genotypes as affected by water deficiency
    11-15
    Views:
    177

    Soybean is a very important legume; it has the highest protein content, and it is a very important source of vegetable oil. Soybean is droughtsusceptible, and drought is one of the major abiotic stresses that has been increasing over the past decades as a result of the global climatic changes. To evaluate the influence of drought stress, three soybean genotypes were grown under rainfed conditions, and compared to irrigated controls. The obtained results showed that the chlorophyll content, leaf area index and plant height decreased under drought stress conditions, which led to noticeable and sometimes significant yield reduction. Our results suggest more specific studies on the physiological changes of the local soybean genotypes under drought stress to better select the adopted ones.

  • Strategic Steps in the Sheep and Goat Branches
    61-68
    Views:
    122

    The balance of the sheep and goat branches can be summarised as follows:
    If the increase in stock size, specific yields, genetic improvement and modernisation are not realised, several thousand shepherds will lose their jobs and possibilities to work, and their families will lose their only source of livelihood.
    Several hundred hectares of grassland will become weedy and the costs of crop protection will increase in these regions. Pollen pollution, the number of allergic ailments and medical costs will increase, mentioning only the main disadvantages. Its financial requirement is nearly equal to the one required for development without any essential compensation or production.
    In order to develop a competitive branch, a subsidisation of 10-20 billion HUF is needed until the accession of Hungary to the EU, depending on the scale and progressivity of development. The subsidisation and realisation of the strategic steps would result in:
    – the establishment of a registered livestock with 1.5 million ewes, which would ensure better market position for the branch in the EU (5%),
    – the establishment of a competitive and marketable branch with a production value of 15-25 billion HUF, calculated using the present price level (after accession, the branch would be self-operating and profitable, with the 6-8 billion HUF/year normative subsidisation by the EU),
    – the establishment of a genetic potential which would ensure our participation in profitable international breeding animal market, which provides extra profit,
    – the establishment of a sheep husbandry with better genetic potential and phenotypic performance, producing a quality of international level,
    – the maintenance of the workplace of more than 10.000 people (saving 3-5 billion HUF/year of the budget),
    – the maintenance of the condition of growing areas of grasslands with their advantages (crop protection and public health) whose financial effect is considerable.

  • The aggregate stability of the soil in respect to the uniform aggregate stability indicator
    83-99
    Views:
    85

    Soil structure and its quality are fundamental properties because they control many processes in soils. Tillage, crop and other factors influence soil structure. Efficient protection of it needs indication of changes in soil structure. A new Normalized Stability Index proposed by Six et al. (2000) tries to evaluate these changes, which was compared with some former used indices. The most common method (wet sieving) was modified to reduce the confounding effects of different particle size distribution of different soil types and method used to the investigation. Changes in soil structure caused by tillage and crop management therefore have been made quantitative and comparable. In this paper, we review the new method and Normalized Stability Index proposed by Six et al. (2000) and present the results of our investigations.

  • Environmental inspection agro tech – guarantee sustainable development agricultural systems
    41-42
    Views:
    129

    Shown the expediency of the environmental expertise technologies of growing crops in terms of impact on soil fertility, crop phytosanitary status, quality, chemicals migration, biological soil activity, crop productivity, which ensure avoidance of adverse impact on the environment and human health.

  • Stevia (Stevia rebaudiana B.) yield in the case of different production technologies
    71-77
    Views:
    185

    Stevia rebaudiana B. offers a natural alternative of sweetening, potential health promotion plant, and our country shows increased interest about cultivation in Hungary in addition to the neighboring European countries. The agricultural production system installation necessary
    understanding of the needs of the plant, as well as exploring the agronomic potential. Field experiments were conducted in 2015 with the aim to highlight some of the technological production parameters and correlations between them. We have reviewed the most important agronomic factors, the spacing (50×50 cm and 33×33 cm), ground covering (agro-cloth covered and uncovered/ control), their vegetative growth (first-,second-order branch), herb yield and quality in effect.
    Based on empirical evidence, that the Hungarian climates also have the opportunity of 3 cuttings during a growing season, besides of early planting, optimal climatic conditions (in October didn’t reduce the daily minimum temperature below 0 °C, after cuttings the maximum interval values remain below 40 °C), and adequate water supply and crop protection facility. The 33×33 cm spacing evaporates more than 50×50 cm spacing, because of the dense population, the continuous canopy less able to breathe, so there are serious chances to the pathogen colonization.
    Based on the results of our research to the wider 50×50 cm spacing favorable appreciate the stevia optimal progress in terms of qualitative and quantitative parameters of the yield. The stevia yields produced in the Northern Great Plains field cultivation can produce similar results as stevia crop yields in warmer climates, where the primary crops. Our research experience suggest that there is a viable domestic stevia cultivation, developing the necessary technology is still growing further investigation justifies.

  • Evaluation of the correlation between SPAD readings and absolute chlorophyll content of maize under different nitrogen supply conditions
    121-126
    Views:
    320

    Currently, one of the most important objectives of agriculture is to maintain the principles of the sustainability. The use of precision technologies in agriculture belongs to this topic. The use of precision technologies is increasingly widespread in the cultivation of various agricultural crops, including maize. Sensing is an important part of these techniques. In our experiment we compared two methods: measuring relative chlorophyll content and the method of determine the extractable chlorophylls. The experimental plant was maize (Zea mays L.) and the measurements were performed at an early development stage (V8) of three genotypes. Three levels of nitrogen (0; 80; 160 kg ha-1) were applied during the experiment. The relative chlorophyll content was measured by SPAD-502 (Minolta, Japan) and a handheld GreenSeeker (Trimble, USA) device. The extractable total chlorophyll content decreased in parallel with the increased nitrogen level. The obtained SPAD values were diversified furthermore the NDVI values have not been changed for the effect of different nitrogen fertilization. In the early stages of development of maize, these parameters need to be complemented with other measurements to provide reliable information about the crops nitrogen status.

  • Harnessing diversity in durum wheat (Triticum turgidum L.) to enhance climate resilience and micronutrient concentration through genetic and agronomic biofortification
    9-20
    Views:
    165

    Huge consumption of wheat-driven food products with low bioavailability and small concentrations of zinc is responsible for zinc-induced malnutrition and associated health complications. The contemporary durum wheat varieties have inherently tiny zinc concentrations in developing grain, which cannot meet the daily human zinc demand. Despite the fact that over two billion people are suffering from iron and zinc-induced malnutrition, various intervention measures have been deployed to reverse the effect of zinc-induced malnutrition on humans. There are evidences that agronomic and genetic biofortification approaches can increase grain yield and nutritional quality (i.e. zinc, iron, protein, and vitamins) of durum wheat to a greater extent. However, there is a lack of direct empirical evidence for which the influence of both biofortification approaches on improving human health. Application of micronutrient-containing fertilizers either in the soil or foliarly is effective in combination with NPK, organic fertilizers coupled with efficient durum wheat varieties, emphasizing the need for integrated soil fertility management (ISFM). Although genetic biofortification is a cost-effective and sustainable approach, agronomic biofortification provides an immediate and effective route to enhancing micronutrient concentrations in durum wheat grain. The application of zinc-containing fertilizers is more effective under drought conditions than in normal growing situations. Hence, this article provides a key information for agronomists and breeders about the potential of biofortification interventions to improve durum wheat yield and enrich the grain qualitative traits to ensure food and nutritional security of the ever-increasing world population.

  • Challenges and agroecological approaches in crop production
    75-89
    Views:
    164

    Never has the need been greater for an ecosystem approach to agriculture. As our global population exceeds 9 billion in the next 30 years, with a concomitant demand for agricultural products, ever more pressure will be placed on our agricultural systems. Meanwhile, climate change is altering the ecological settings in which agriculture is practiced, demanding adaptation. Knowledge generated by long-term research will help to address one of the grand challenges of our time: how to meet sustainably the growing world demand for agricultural products – in a way that minimizes environmental harm and enhances the delivery of a diverse array of ecosystem services.

  • The Role of the 4M-ECO Agrieconomical Modell in the Crop Cultivation
    170-173
    Views:
    87

    Today, c for agricultural use are of ever increasing significance. These provide an opportunity for more accurate planning, and favourably influence the efficiency and economic performance of given enterprise. The relevant literature divides models according to various criteria. The most common is the division between optimising and non-optimising models. Non-optimising models generally endeavour to make the best use of technological lines, machine capacity, while optimising models are used to optimise revenue returns from sales or, occasionally, production costs. In our case, revenue and returns from sales were optimised. The models examined consist of several modules. Which include the following: plant cultivation modules, evaluations (assessment of situation, conception plan, complex corporate evaluation), supplementary sheets (sheets and charts for ancillary plant production, general costs of operation, summary and crops structure optimisation). With the help of the model, annual a particular can be made for an optimal crop structure the resources of the enterprise. This it becomes possible to define the largest net revenue on a corporate level.

  • Plant growth analysis of wheat populations in a long-term field-experiment
    147-151
    Views:
    119

    The experiments were conducted as part of the long-term trial adjusted, in triculture (pea-wheat-corn) and biculture (wheat-corn), at three nutrition levels, with the use of one crop protection technologie (conventional) at the Látókép Research Site of the Centre of Agricultural Scienses, University of Debrecen, on a chernozem soil. The wheat variety used in the long-term trial was GK Csillag, which was sown at 5,8 million germs/ha.
    The effect of pre-crops and nutrient-supply levels on some growth-parameters (LAI, HI, LAD), just as SPAD-values and yield amounts of winter wheat has been investigated in this experiment. We tried to find out the extent of relationship between the different parameters, so we determined the relationships between different nutrient-supply levels, yield amounts, LAI- SPAD- and LAD-values – measured in the crop-year of 2010–2011 in different crop rotation systems – by using correlation analysis. It has been stated both in case of bi- and tri-culture crop-rotation systems that different fertilizer dosages had significantly affected the leaf area index dynamics and its maximal value, and that increasing N+PK fertilization has
    significantly increased the duration of leaves, as well. The highest SPAD-values were measured during the flowering and grain filling stages. However, we haven’t revealed significant differences between all fertilizer treatments. In case of the bi-culture crop-rotation system harvest index values showed an increasing tendency parallel to the increasing nutrient-supply levels, while in case of the tri-culture system this tendency was rather decreasing. However, these differences were
    not significant. Parallel to the increasing fertilizer dosages yield results were increased in a significant extent. At the same nutrient supply-levels 2088–4615 kg ha-1 higher yields were measured in the tri-culture than in the bi-culture system. The correlation analyses have confirmed that all of the investigated parameters (yield amount, LAI, SPAD, LAD) had almost in all cases close positive correlation to the nutrient-supply level and the yield amount in both crop-rotation systems. These results have confirmed that the leaf area, the leaf duration, the SPAD-values and the fertilization have altogether resulted in the production of maximum grain yields.

  • The potential of biological control on invasive weed species
    73-75
    Views:
    41

    Sorghum halepense is one of the invasive species in Europe. This study was made to identify the morphology of fungi on invasive weed species samples on the roots of Sorghum halepense. The samples were collected in the region of Debrecen. The experiment was conducted under laboratory conditions to determine the microscopic form of fungi. The samples were put on PDA and for identification of fungi is based on the morphological characteristics of the features and colonies of conidia that were developed in Petri dishes.

    The examination of the culture revealed that the fungus from the root of Sorghum halepense was Aspergillus niger. Pathogenicity and the relationship between the fungus and Sorghum halepense are still uncertain so in the future pathogenicity tests and re-isolations from plants are very important steps.

  • The Effect of Atmosperical Aridity on the Changes of Quantitative Parameters of Horticultural and Arable Crops
    40-45
    Views:
    103

    The occurence of atmospherical drought causes serious water-supply problems in the most cases of our domestic agricultural plant species. This paper was studied, how can we quantificate the atmospherical drought, with the help of a low input (relative humidityof the air, temperature) index. If this index (LSZI) characterized the atmospherical drought well, it will suitable to estimate the yield amount of agricultural plants.
    The index elaborated by the authors was tested on county average crop yield of 14 agricultural plant species. Moreover we compared the atmospherical drought index (LSZI) to other aridity parameters, how suitable for estimate the yield amount.
    Result of experiments show that, the atmospherical drought index (LSZI) can be used well by several agricultural plant species in especially coern and sugar-beet to estimate yield amount. Excellent results were found by comparison to other aridity indexes, this means it is worth using in the aridity researches in the future.

  • Caliometric characterisation of crop production byproducts
    55-58
    Views:
    139

    By the decreasing tendency of the fossil energy resources more emphasis put on the usage of renewable energy resources. The consideration of environmental protection and the efforts of the European Union make current the widespread usage of renewable energy within biomass energy. One of the determinative trends of biomass energy is the direct combustion of biomass. Characteristically woody stocks are produced for this aim, but there is a considerable potential in several byproducts of growing herbaceous plants or of other processes.

    In our study three byproducts of plant production have been investigated which appeared at the harvest. The Higher Heating Values of wheat, maize and sunflower byproducts have been determined by an IKA C2000 Basic adiabatic calorimeter. According to the statistical analysis of the measured data the HHV of the byproducts are different, and these values are in a negative correlation with the amount of ash in % (R2=0.873) appeared by the combustion.

  • Population genetic results of Hungarian Botrytis cinerea isolates establishing new technologies with decreased chemical usage against grey mould
    259-261
    Views:
    103

    Botrytis cinerea causes gray mold on a high number of crop plants. Information about the populations of plant pathogen fungi may help to develop new strategies for the effective and economic crop protection with reduced fungicide usage. Hungarian B. cinerea populations were characterized with using different molecular genetic parameters. B. cinerea group I strains, characterized with high rate of fenhexamid resistance, could be detected only in restricted number. The Hungarian B. cinerea populations were characterized with high genetic diversity, and the regular occurrence of sexual reproduction. These results highlight the importance of rotating different type of fungicide in the plant protection technology against grey mould.

  • Response of sugar beet to different foliar fertilizers
    127-136
    Views:
    93

    The yield and quality of the sugar beet are mainly determined by level crop production system; therefore the effects of foliar fertilization were studied. Our field trials were carried out in 2005  and 2006 in Hajdúböszörmény, at two experimental sites. In our trials the effects of Biomit Plussz, Fitohorm and Kelcare Cu (having high Cu content) as foliar fertilizers, as well as a fungicide with high sulphur content, Cosavet DF, were studied and
    compared. Effects of treatments were studied in four replicates. 
    We took root samples at 4 week intervals, starting in August. The quality of root (sucrose, potassium, sodium and alfa-amino N content) was determined from filtrated beet broth, by an automatic beet laboratory system, called VENEMA. Leaf samples were taken three times in the growing season, element composition was measured by ICP-OES.
    We found that the crop and the sugar yield were significantly influenced by the foliar treatments both of the two years.

  • The influence of fertilization and tillage method on the formation root system capacity and grain production of spring barley
    89-93
    Views:
    123

    To evaluate the interaction of year x variety, year x tillage method and year x fertilization on the grain yield and root system capacity (RSC) of spring barley, we ran polyfactorial field trials in agroecological conditions of a warm corn production area in Slovakia, at  Malanta, in 2009 and 2010. The RSC measurements were done using LCR - meter at a frequency of 1 kHz and they took place in four growth stages: at leaf development in the stage of four leaves (RSC1), in full tillering (RSC2), in the stage heading (RSC 3) and at the stage of ripening (RSC4). The values of grain yield, RSC1, RSC2, RSC3, RSC4 reached in 2009 comparison to 2010 were significantly lower. The highest yield in 2009 was reached by variety Marthe (4.49 t.ha-1) and by variety Bojos (7.19 t ha-1) in 2010. The highest values of RSC in observed growth stages were achieved by variety Bojos in 2009, and in 2010 also besides RSC1. Within both years, difference in yields between tillage methods was not observed. The values of RSC in growth stage of 4 leaves and tillering was higher at conventional tillage, butthe values of RSC3 and RSC4 were higher with minimized tillage. The highest grain yield and values of RSC in every growth stage were achieved on the fertilization variant “c“ in 2009 and on the fertilization variant “b“ in 2010. The correlation relationships between grain yield and RSC were significant and positive in every growth stage. The strongest relationship was found among grain yield and RSC (r=0.6047).

  • The main influencing factors effecting the yield of maize
    137-141
    Views:
    83

    Maize is one of Hungary’s major cereals. In the 1970s and 1980s, we were in the frontline regarding yields and genetic advancement. However, yield fluctuation in maize has increased to 50-60% from 10-20% since the 1980s, which was partly caused by the increase in weather extremes due to climate change and by agrotechnical shortcomings.
    The experiments were carried out on typical meadow soil in four repetitions in the period of 2007-2008. In the sowing time experiment, sowing was performed on 10 April, 25 April, 15 May under a uniform fertilization of N120, P2O580 K2O 110 kg/ha. In the fertilization experiment, the yielding capacity of 10 hybrids with different genetic characteristics was studied in a control (non-fertilized) treatment and basic treatment of N40 P2O5 25, K2O 30 kg ha-1 active ingredient and a treatment with fivefold dosages of the basic treatment. In the plant density experiment, the relationship between plant density and yield was analysed at plant densities of 45, 60 and 75 thousand plants per ha. We found a tight correlation between sowing time and yield and grain moisture content at harvest. We found that grain moisture can be reduced by 5-10% by applying an earlier sowing time.
    The agroecological optimum fertilizer dosage was N 40-120, P2O5 25-75, K2O 30-90 kg ha-1 active ingredient at a plant density of 60-90 thousand plants ha-1 depending on the hybrid and the year.