Search

Published After
Published Before

Search Results

  • The effects of agrotechnological factors on winter wheat yield in humid cropyear
    162-167
    Views:
    76

    The effects of crop rotation, nutrien supply and crop protection technologies, as well as the appearance of the main ear- and leafdiseases
    (powdery mildew, helminthosporium leaf spot, leaf rust, fusarium) were studied on the crop yields of winter wheat variety MV
    Pálma during the 2009/2010 crop year. The experiments were conducted in triculture (pea – wheat – corn) and biculture (wheat – corn), at
    five nutrition levels, with the use of three crop protection technologies (extensive, conventional and intensive) at the Látókép Research Site of
    the University of Debrecen, Centre of Agricultural Sciences. Our results proved that the appearance of leaf- and ear-diseases were
    significant in the wheat cultures during the 2009/2010 crop year, because of the rainy, warmer than usual weather, the lodging, and the huge
    vegetative mass developed. The most severe infections by the four examined diseases after pea and corn pre-crops were observed at
    extensive crop protection levels, when fertilizers were used at the highest dose.
    Following corn pre-crop, in the case of all the three crop protection technologies the maximum rate of wheat yield results were achieved
    at N150+PK level. The highest yield was reached at intensive crop protection level (6079 kg ha-1). In triculture, in case of all the three crop
    protection technologies the maximum yields were achieved at N50+PK level; in extensive technology 5041 kg·ha-1 yield, in conventional
    technology 6190 kg ha-1 yield was realised, while in the intensive technological model the yield was 7228 kg ha-1.
    The relationship between yield and fertilizer amounts, the rate of pathogen contaminations, crop protection technologies and pre-crops
    was defined with correlation analysis in case of different crop rotations during the 2009/2010 crop year. Based on the results of the
    experiment, we found that in stands after corn pre-crop strong positive correlation was established between the crop protection level and the
    crop yield (0.543), the nutrient levels and the emergence of the four examined pathogens, and between the nutrient levels and the yield
    (0.639). Extremly strong positive correlation was observed between crop protection and yield (0.843) in triculture. Strong positive
    correlation was detected between the nutrient levels and the presence of the four examined pathogens, as well as between nutrient and
    lodging (0.688). Strong negative correlation was between the crop protection level and the four examined diseases both in biculture and
    triculture.

  • The effect of crop protection and agrotechnical factors on sunflower in the Hajdúság region
    39-46
    Views:
    79

    Extreme weather conditions are becoming more and more frequent in the crop years, thus increase the risk of sunflower production.
    The objective of researches into plant production is to minimize these effects as much as possible. In this sense, the optimization of
    agrotechnological factors is of high importance. Within these factors, the appropriate crop technology (sowing time, crop density)
    and optimized, rational crop protection technologies are important, especially in the highly sensitive sunflower cultures. The effect of
    sowing time, crop density, and fungicide treatments on the yield of sunflower hybrids was analysed in different crop years in 2008
    and 2009. In each case, the infection was highest with the early sowing time and at the highest crop density level (65000 ha-1). When
    one fungicide treatment was applied, the rate of infection decreased compared to the control treatment. The further decrease of the
    infection rate was less after the second fungicide treatment.
    In the humid year of 2008 the crop yield was the highest at 45000 ha-1 crop density level in the control treatment and at 55000 crop
    ha-1 crop density level when fungicides were applied. In the draughty year of 2009 the maximum yield was gained at 55000 ha-1 crop
    density level in the control treatment and at 65000 crop ha-1 when fungicides were applied. In 2008 and 2009 as regards the crop
    yield, the difference between the optimal and minimal crop density levels was higher in the fungicide treatments than in the control
    treatment (in 2008: control: 517 kg ha-1; one application of fungicides: 865 kg ha-1; two applications of fungicides: 842 kg ha-1), (in
    2009: control: 577 kg ha-1; one application of fungicides: 761 kg ha-1; two applications of fungicides: 905 kg ha-1).
    In each and every case, the first treatment with fungicides was more effective than the second. In 2008, the highest yield was
    obtained with the third, late sowing time in each fungicide treatment. The differences between the crop yields with different sowing
    times was less than in 2009, when the results of the second treatment exceeded those of the first and third treatment in each case.

  • Evaluation of reaction to plant density of sunflower hybrids by regression and Kang’s stability analysis
    101-109
    Views:
    91

    The world production area and the total production of sunflower has significantly been growing. The harvested yield was 23.4 and 21.1 million ha in 2005 and 2001, respectively. The total sunflower seed production has also unexpectedly increased.
    Although sunflower is produced on lower quality soils in Hungary, in 2005 the average harvested yield was 2.43 t ha-1, which was the highest in the world. 
    Sunflower is a typical commercial plant and fits well in the crop structure. Since in terms of acreage the most significant crops are corn and cereals, the partial monoculture cultivation cannot be avoided. Sunflower production is a way to eliminate this problem, therefore it has an important role both in cultivation and ecological points of view.
    Accordingly, sunflower has an important role in reducing the monoculture cultivation of some plants, as well as increasing biodiversity. Sunflower well adapts to Hungary’s climatic conditions and its production is easily practicable in our country.
    The reaction of sunflower hybrids on crop density change is different. Some hybrids are more some are less sensitive to this parameter. In different crop years, the crop density optimums of the different genotypes are also different. In Hungary, the yield and quality is primarily determined by fungal infections, while viruses and bacteria are less important.
    The research was conducted at the Látókép farm and Regional Research Institute of the University of Debrecen, Centre of Agricultural Sciences. The research institute is situated by Road 33,15 km from Debrecen in the Hajdúság. The duration of the experiment was seven years, 10 hybrids were examined in each year.
    Two hybrids used every year, Aréna/PR and Alexandra/PR hybrids were tested by Kang’s stability analysis. We found that Alexandra/PR was most balanced at every levels of crop density. Both hybrids performed most stable yield at 65000 ha-1 crop density level and less balanced at 35000 ha-1 crop density level. As a result of improved environmental conditions, the yield increase of Aréna/PR was higher than that of Alexandra/PR.
    Our regression analysis found that the maximum yield of Lympil, Louidor, Hysun 321, PR63A82 and PR64A63 hybrids were harvested at 47000-60000 plant ha-1 crop density level. The statistical analysis showed that the highest yield was harvested from Lympil and Hysun 321. As regards the crop yield, the most stable hybrids were Louidor and Lympil. The optimum crop density interval of Rigasol/PR and Larisol (58000 plant ha-1) was wider than that of Diabolo (46000 plant ha-1). The maximum yield of Larisol was higher at the optimal crop density level. As regards yield, Diabol was the most stable hybrid.
    The statistical analysis on the stability of the yield of Alexandra/PR and Aréna/PR showed that Aréna/PR is more stable, and its optimal crop density level is lower than that of Alexandra/PR.

  • Effect of tillage practices, fertilizer treatments and crop rotation on yield of maize (Zea mays L.) hybrids
    43-48
    Views:
    164

    This research was conducted at the University of Debrecen Látókép Research Station and is part of an ongoing long-term polyfactorial experiment. The impact of three tillage systems (Mouldboard plowing-MT, Strip tillage-ST, Ripper tillage-RT) and two levels of fertilizer treatments (N80 kg ha-1, N160 kg ha-1) along with a control (N0 kg ha-1) on the yield of maize hybrids (Armagnac- FAO 490 & Loupiac-FAO 380) cultivated in rotation with winter wheat was evaluated during a two-year period (2017–2018).

    Amongst the three tillage treatments evaluated, ripper tillage (RT) had the highest average yield (10.14 t ha-1) followed by mouldboard tillage (MT) and strip tillage (ST) with 9.84 and 9.21 t ha-1 respectively. Yield difference between RT and MT was not significant (P>0.05), as compared to ST (P<0.05). Soil moisture content varied significantly with tillage practices and was highest in ST, followed by RT and MT (ST>RT>MT). Yield of RT was 7–9% higher than MT in monoculture plots, while MT reign superior in biculture plots (monoculture: RT>MT>ST; biculture: MT>RT>ST).

    A positive interaction between tillage and fertilization was observed, with higher yield variation (CV=40.70) in the non-fertilized (N0) plots, compared to those which received the N80 (CV=19.50) and N160 kg ha-1 (CV=11.59) treatments.

    Incremental yield gain from increase fertilizer dosages was significantly higher in monoculture, compared to biculture. There was no significant difference in yield between N160 and N80 in the biculture plots (12.29 vs 12.02 t ha-1). However, in monoculture plots, N160 yield was 23% higher than the N80 kg ha-1 (N160=11.74 vs N80=9.56 t ha-1).

    Mean yield of maize in rotation with winter wheat was 28% (2.47 tons) higher than monoculture maize. The greatest benefit of crop rotation was observed in the control plots (N0) with an incremental yield gain of 4.39 tons ha-1 over monculture maize (9.92 vs 5.43 t ha-1).

    Yield increased with higher fertilizer dosages in irrigated plots. Fertilizer application greatly increased the yield of maize and accounted for 48.9% of yield variances. The highest yield (11.92 t ha-1) was obtained with N160 kg ha-1 treatment, followed by N80 kg ha-1 (10.38 t ha-1) and N0 kg ha-1 (6.89 t ha-1) respectively.

    Overall mean yield difference between the two hybrids was not statistically significant, however, yield of FAO 380 was 3.9% higher (9.06 vs. 8.72 t ha-1) than FAO 490 in monoculture plots, while in biculture plots, FAO 490 was 4.1% higher than FAO 380.

    Average yield in 2018 was 13.6% (1.24 t ha-1) higher than 2017 for the same set of agrotechnical inputs, thus, highlighting the significant effect of cropyear.

    Armagnac (FAO 490) cultivated in rotation with winter wheat, under ripper tillage and N80 kg ha-1 is the best combination of treatments for optimum yield.

  • Evaluation of the yield and baking quality of winter wheat (Triticum aestivum L.) varieties in different cropyears
    95-100
    Views:
    104

    We have investigated the effect of the cropyear, the genotype, the nutrient supply and their interactions on the yield and the quality parameters of three different winter wheat genotypes in three different cropyears. The most disadvantageous influence on the yield averages was caused by the moist weather of 2010, when yield results fell behind the mean of the two other examined years and the nutrient optimum was around low doses. The optimal cropyear turned out to be the ordinary 2011, the best yield results were experienced during this cropyear. Although the drier periods in 2012 decreased the yield values, the varieties could realize high yield maximum values. Considering the yield results, Genius turned out to be the best variety. In respect of the quality traits, 2010 turned out to be the best cropyear in case of all the three varieties. Despite the dry weather of the spring of 2012, the precipitation fell during flowering and ripening phases had positive impact on the grain-filling processes and contributed to the development of better quality. As a consequence of the significantly lower amount of precipitation during the generative phenological phases, the worst quality parameters were realized by the varieties in 2011.

     

    In respect of crop year effect, 2010 was unfavourable for the amount of yield, but the most beneficial for the quality. 2011 was the most advantageous for the yield amounts but disadvantageous for the quality parameters. Although in 2012 extreme crop year effects were experienced after each other (dry and warm spring, moist and warm summer), the yield average and quality trait values were close to the yield averages of 2011 and quality parameters of 2010. Analyzing our results we can state that the average crop year was favourable rather for the yield. The appropriate amount of precipitation during the whole 2010 and that during the generative phenophases in 2012 favoured the development of good quality.

    Consequently, the appropriate amount of precipitation is essential for the development of good quality during the grain-filling period. The negative crop year effects were only compensated but not eliminated by the good nutrient supply. Genius achieved excellent yield averages but performed worse quality parameters than Mv Toldi, whose quality parameters were outstanding but the yield averages fell slightly behind those of Genius. Considering the yield results, the variety Genius turned out to be the best, while Mv Toldi was the best in quality.

  • The examination of the agronomy, the amount of yield, and the yield stability of winter wheat varieties
    61-72
    Views:
    78

    Our research was carried out at University of Debrecen Centre for Agricultural Sciences Faculty of Agriculture Institution of Plant Sciences Látókép Research Institute through the breeding year of 2003/2004, 2004/2005 and 2005/2006 using cherrnozem soil. In our research we tested 14 chosen autumn wheat varieties during the three crop years.
    The different varieties showed very dissimilar ability of resistance against diseases through the three crop years. We could observe both susceptible and resistant varieties. Susceptible varieties got diseases even in favourable crop years. The observed winter wheat varieties showed higher susceptibility against helminthosporium (21.8%) and leaf rost (16.4%). Among the 14 varieties we experienced the least susceptibility in the case of ‘Gaspard’ and ‘GK Kalász’. The research showed that the disease of fusarium undoubtedly depends on the features of the crop year.
    In terms of stem solidity we experienced big differences. Among all the observed winter wheat varieties the mid-late ripening ‘Gaspard’ showed the best results in the average of the three years, only 5.3% was beaten down.
    The three ripening group of the winter wheat showed the following average yield in the average of three years: 7065 kg/hectare (early ripening varieties), 7261 kg/hectare (late ripening varieties), 6793 kg/hectare (mid-late ripening varieties). Among all the observed varieties the early ripening ‘Flori 2’ produced the biggest yield (7692 kg/hectare).
    During the three crop years we reached very different amounts of yield which means that weather conditions had a telling affect on yield. In 2004 we reached an excellent average yield in all the tree  breeding groups because of the favourable weather conditions. In 2005 we had a moderate amount of yield because of the unfavourable weather conditions of winter. The year of 2006 showed the smallest amount of yield which is due to the fact that the plant grew less thick than usually.
    There were significant differences among the observed varieties in the term of yield, which can be attributed to dissimilar biological basics.
    One of he most important questions is the yield stability of the varieties. We had extremely different results at this field. Speaking in general terms we can state that both weather conditions and genetical abilities have a determining effect on yield. In the case of winter wheat varieties the rate of yield fluctuation was quite big, moving in the interval of 33.7-70.3%. Among all the observed varieties ‘Gaspard’ showed the best yield stability (33.3%). 

  • Correlation between the weather in 2017 and the productivity of maize
    89-93
    Views:
    150
    In our research we examined the effect of the hybrid, the nutrient supply, the number of plants and the abiotic factors (temperature, amount of precipitation) on the yield, crop quality and yield stability of maize. We devoted special attention to the natural nutrient utilization ability and fertilizer reaction of maize. The experiment took place in Hajdúszoboszló on chernozem soil, on a nearly 8 ha field. The size of one plot was 206 m2; therefore, this experiment was half-industrial. We tested six hybrids with different genetic characteristics and growing seasons. I analysed the correlation between the nutrient supply and the yield of maize hybrids with control treatment (treatment without fertilization) and with N 80, P2O5 60, K2O 70 kg ha-1 and N 160, P2O5 120, K2O 140 kg ha-1 fertilizer treatments. The yield increasing effect of the fertilizer also depended on the number of plants per hectare to a great extent. The number of plants of the six tested hybrids was 60, 70, and 80 thousand plants ha-1.
    In Hajdúszoboszló in 2017, up to October, 445.8 mm of rain fell, which is in line with the average values of 30 years, and is only 45.7 mm less than those. In 2017, the effect of increasing the plant number was slighter. Averaged over the observed fertilizer treatments and hybrids, the yield was 9.10 t ha-1 with 60 thousand plants ha-1, 9.11 t ha-1 with 70 thousand plants ha-1 and 9.12 t ha-1 with 80 thousand plants ha-1. Without fertilization, in most cases, increasing the plant number from 60 thousand plants ha-1 to 70-80 thousand plants ha-1 does not increased the yield but decreased it. With N80+PK treatment the yield changed between 8.90 and 11.27 t ha-1. The effect of increasing the plant number was just slightly observable and did not show a clear tendency. The effect of changing the plant number, even with the highest dosage of fertilizers, could not be detected adequately. In contrast with the plant number, the effect of the different fertilizer treatments was expressly traceable. Compared to the control treatment (treatment without fertilization), with N80+PK fertilizer dosage with 60 thousand plants ha-1 the yield increased by 3.36–4.99 t ha-1. The smallest demonstrable proof, i.e. the LSD5% was 0.22 t ha-1, which means that fertilization, in each case, significantly increased the yield. When analysing the effect of fertilization in the average of the hybrids and the different plant numbers, a yield of 5.61 t ha-1 could be detected, which value was 10.12 t ha-1 with N80+PK treatment and 11.61 t ha-1 with N160+PK treatment. Thus, it can be calculated that compared to the treatment without fertilization, the N80+PK treatment increased the yield by 4.51 t ha-1, while compared to the N80+PK treatment, the N160+PK treatment increased the yield by 1.49 t ha-1. In addition to agrotechnical factors, in maize production, the impact of the crop year is specifically of high importance.
    The average yield of hybrids (in the average of the different fertilizer treatments) was 6.81 t ha-1 in 2015, 11.86 t ha-1 in 2016 and 9.11 t ha-1 in 2017. When comparing the yield results against the precipitation data, it is clearly visible that the amount of rain fell in the January– October period is directly proportional to the average yield of maize. The effect of the crop year can be defined in a 5.05 t ha-1 difference in the yield.
  • Study of plant production modells with different intensity in winter wheat production
    51-60
    Views:
    91

    The effects of crop rotation, nutrient supply and plant protection technologies were examined on the yield of Mv PÁLMA winter wheat variety and on the most important diseases of ear and leaf. Our experiments were carried out on chernozem soil in the Hajdúság in 2006 and 2007, and three plant protection technologies (extensive, average, intensive) and three irrigation variations (without irrigation, irrigated with 50 mm, irrigated with
    100 mm) were applied in different crop rotation systems. 
    In the triculture crop rotation a higher rate of infection was observed than in the biculture crop rotation, because the vegetative growth was more expressed after pea and these microclimatic factors were favourable for the development of pathogens.
    In the triculture crop rotation (pea – wheat – maize) the powdery mildew, DTR and leaf rust of wheat were present in both examined years (powdery mildew 5-15%, DTR 14-42%, leaf rust 8-37% in cropyear 2005/2006, powdery mildew 12-32%, DTR 9-29%, leaf rust 8-26% in cropyear 2006/2007). Fusaria could be observed in 2006 (depending on the plant protection technologies and nutrient supply in the biculture 7-27% and in the
    triculture 5-19%). With higher amounts of fertilizers the rate of infection increased and reached its maximum at the highest dose of nutrient supply (N200 +PK).
    We observed the highest rate of infection by ear and leaf diseases in the case of the extensive technology, while this rate could be considerably reduced by the application of the intensive technology.
    Both in 2006 and 2007, yields were the highest at the N100-200+PK levels in the triculture after pea (6028-7939 kg ha-1 in cropyear 2006, 6578-8690 kg ha-1 in cropyear 2007 depending on plant protection technologies), and at the N150-200+PK levels in the biculture after maize (6096-7653 kg ha-1 in cropyear 2006, 4974-8123 kg ha-1 in cropyear 2007 depending on the plant protection technologies). The highest yield maximums were
    reached when pea was the forecrop. The yields on the experimental plots of the intensive plant protection technology was 224-2198 kg ha-1 higher (depending on the forecrop) compared to the plots where the extensive technology was used.
    The highest yield without irrigation was at the N150+PK both in biculture and triculture crop rotation. Among the irrigated variations Ö2 and Ö3 at N200+PK fertilisation resulted in the highest yield in the biculture crop rotation, while the N100+PK level in triculture system. In the biculture crop rotation the extra yield was 14-51% higher (575-1225 kg ha-1 depending on plant protection technology) when 50 mm water was irrigated, and
    15-54% higher (778-2480 kg ha-1) if 100 mm irrigation was applied comparing to the non-irrigated versions. The yield was  7-17% higher (560-1086 kg ha-1) in the Ö2 irrigation variation, and 8-23% (691-1446 kg ha-1) higher in the Ö3 irrigation variation compared to Ö1 irrigation variation (non-irrigated).
    A correlation analysis was made to reveal the connection between the yield, the amount of fertilizers, the rate of infection, the plant protection technologies and the forecrops. Strong positive correlation (0.846) was found between year and fusaria infection. Strong positive correlation was observed between fertilization and powdery mildew infection (0.525), fertilization and DTR (0.528), fertilization and yield quantity (0.683). Lower
    correlation was found between fertilization and leaf rust infection (0.409), and forecrop and yield (0.472), recpectively. Negative correlation was calcutated between plant protection technologies and DTR (-0.611), and plant protection technologies and leaf rust (-0.649).

  • The effect of plant density to the yield results and the yield components of maize hybrids
    89-93
    Views:
    133

    Maize is the crop that is produced on the second largest area in our country, in Hungary. It is planted on nearly 25% of the country’s growing area and it was produced on 1 090 439 hectares in 2016. Despite the continuous development of the biological basis and production
    technology, the growth of the yield results is not constant, its fluctuation is significant. It can be even up to 60%, because of the extremity of the years. The exploitation of the yield potential of modern hybrids is possible if we harmonize the effects of the ecological factors and properly applied instruments of agro technology and by these we ensure their interaction to reach a favorable outcome. The applied plant density is an important, well researched, but at industrial level a not enough utilized element of the maize production.
    The results of the extensive tests, done between 2009 and 2015, showed that the genotype, the year effect and the plant density are in strong correlation with each other determining the yield results. In the past seven years the examined genotypes reached the highest yield
    performance at the highest plant densities. The early hybrids (RM90–95, FAO 200–300) are capable of producing them at higher plant density, while in case of the mid and late maturity varieties the further increasing of the density after reaching the optimum level led to yield depression.
    According to our experimental results, the yield is in close positive correlation with the increase of the plant density. The effect of the growing season has great significance in forming the yield results and this determines the applicable plant density too.
    The yield of maize is determined by a resultant of components. The main component is the number of ears per plant and the amount of kernels per ear, which is calculated from the number of kernels on an ear and the weight of them. The number of the kernels on an ear is
    calculated from the number of rows on the cob multiplied by the number of seeds in one row on the cob. In dry years, at lower yield levels the yield decreases because of the shorter ears, while at the higher levels the number of kernels in a row and the thousand-kernel weight decreases,causing yield depression this way. From our examinations it turned out that the plant density reaction of a genotype is individual, every variety reaches its maximum kernel number per hectare – in other words the maximum yield - in an individual way.

  • The effect of production area on the development of yield producing factors of maize (Zea mays L.) hybrids of different genotypes
    67-72
    Views:
    125

    Maize yield amount development is determined by the given crop year and the genotype of the applied hybrid, but beside these also by the applied agrotechnical factors, in particular by sowing technology. The development of yield amount and yield producing factors of five maize hybrids of different genotypes has been studied in a small-plot field experiment by the application of different row spacings and plant density variants. The production of the individual plants shows decreasing tendency parallel to the increasing plant density, however, this decrement is compensated by the higher number of plants per unit production area. Individual plant production is determined by the development of yield producing factors, such as the length and the diameter of cobs, just as by the thousand seed weight – that were studied in the present research work as well.

    In the present research work the decreasing row spacing resulted in a yield increment of 0.67 t ha-1 (4.53%) in 2013, while in contrast in 2014 yield was decreased by 1.75 t ha-1 (14.87%). The high amount of precipitation in March was determinant in 2013: it filled up the soil water stock and balanced the negative effect of the inadequate amount and distribution of precipitation during the vegetation period for the yield. Lower extent of yield increment (0.6 t ha-1) was registered in 2014 in case of the row spacing of 76 cm than in the previous year. In case of a row spacing of 45 cm the difference between the two crop years was 3.1 t ha-1. The highest impact on the yield production factors was found in all treatment combinations in case of the applied hybrid among the three studied treatment factors. In the crop year of 2014 the effect of plant density on cob diameter and thousand seed weight could be revealed as well. In case of the cob diameter significant difference was found between the plant densities of 70 000 and 90 000 plants ha-1, just as between the populations with densities of 50 000 and 90 000 plants ha-1. In case of the thousand seed weight significant differences could be found by the application of plant densities of 70 000 and 90 000 plants ha-1. The highest values of the studied yield producing factors were measured in case of the plant densities of 50 000 and 70 000 plants ha-1; increasing the plant density to 90 000 plants ha-1 resulted in rather decreasing values.

  • Site and hybrid-specific agrotechnical models in sweet corn production
    105-108
    Views:
    92

    The effect of three agrotechnical factors (sowing time, fertilization, plant density) and two genotypes on the crop yield of sweet corn was examined on chernozem soil in the Hajdúság region in two different crop years. Compared to the 30-year average, the climate was dry and warm in 2009 and humid in 2010. The experiments were conducted at the Látókép Research Site of the University of Debrecen. In the experiments we applied two sowing times (end of April, end of May), six fertilization levels (control, N30+PK, N60+PK, N90+PK, N120+PK, N150+PK) and two crop density levels (45 thousand ha-1, 65 thousand ha-1). The hybrids we used were Jumbo and Enterprise. As regards the requirements of sweet corn production, the crop year of 2009 was dry and warm. The effect of moisture deficiency was more adverse on the crop yields with the second sowing time. On the contrary, the other examined year (2010) was significantly humid; the precipitation was 184 mm above the 30-year average and the temperature was average.
    In the dry and hot crop year, the best yields were obtained with the hybrid Jumbo (25677 kg-1) at 65 thousand ha-1 plant density level on the average of the fertilization levels. The crop yields of Enterprise were also the highest at high plant density level (24444 kg ha-1). With the second sowing time the highest yields were obtained at the higher plant density level (65 thousand ha-1) with both hybrids (Jumbo 18978 kg ha-1, Enterprise 18991 kg ha-1), which confirmed the good adaptation capability of these hybrids at high plant density level. In humid crop year with early sowing time the highest yielding hybrid was Enterprise (at 45 thousand ha-1 crop density level 20757 kg-1), at the same time, Jumbo was best yielding at the higher plant density level (18781 kg-1). With the second sowing time the highest crop yield was obtained with Enterprise again (20628 kg ha-1 at 65 thousand ha-1 plant density level). With this sowing time the average yields of Jumbo, was 18914 kg ha-1 respectively. We found that dry crop year and early sowing time provided the best conditions for sweet corn production; the highest yields were obtained under these circumstances, which might be the results of the outstanding water management of chernozem  soils.

  • The effect of the sowing time on the yield and oil content of sunflower (Helianthus annus L.) in different crop protection models
    57-61
    Views:
    129

    The field research was carried out at the experimental farm of the University of Debrecen at Látókép on calcareous chernozem soil in Hungary. We examined the effects of the sowing time and the fungicide treatment on the yield, oil yield and oil content of two different genotypes of sunflower hybrids (NK Ferti, PR64H42) in 2012 and 2013. We applied three different sowing times (early, average, late) and two different treatment levels of fungicides (control =no fungicides applied, double fungicide protection).

    During our research, we received better results in 2013 than in 2012. The application of different planting times affected the yield and oil yield production and the oil content as well. The optimal circumstances for yield and oil yield production were provided by late planting in 2012, while by average planting time in 2013. The highest oil yield results were reached by late plating in both years (except for hybrid PR64H42 in the double treated parcels where average plating time turned out to be more effective). The correlation between the plating time, the yield and oil yield production and the oil content was strong in 2012 (r=0.600**, r=0.639**, r=0.590**). On the other side, in 2013, the correlation was medium between the planting time, the yield production and the oil content.

    We applied Pearson’s correlation to analyze the effect of the double fungicide treatment on the yield and oil yield production (2012: r=0.498**, r=0.407**). These results were better in 2013 (r=0.603**, r=0.623**), besides, the double fungicide treatment also increased the oil content (r=0.315**).

  • The effect of sowing time on the yield and the variance of the seed moisture content a harvest of maize (Zea mays L.) hybrids
    39-49
    Views:
    89

    Sowing time is an important crop technology element of maize. We studied the effect of this factor on the growth and production of maize in an experiment carried out near Hajdúböszörmény, in 2003 and 2004, and near Debrecen, in 2005.
    The soils of the experiments were humic gley soil and chernozem. Weather in both years differed greatly. 2003 was drought. Neither the distribution, nor the quantity of the precipitation were suitable in the growing season for maize. This fact basically determined the results.
    In 2004 and in 2005, there were favorable and rainy seasons. The distribution and quantity of precipitation were suitable between April and September. The average temperature was also suitable for maize.
    In 2003, we tested seven hybrids at four sowing times. Hybrids with a shorter vegetation period gave the highest yield at the later sowing time, while the hybrids with a longer vegetation period gave them at the earlier sowing time. The yield of PR34B97, PR36N70, PR36M53 hybrids were the best at every sowing times. The moisture loss of hybrids in the late maturity group was faster in the maturity season, but the seed moisture content was higher than the hybrids with early sowing time. The seed moisture content was very low due to the droughty year. In two hybrid cases, this value was higher than 20% only at the fourth sowing time.
    In 2004, we examined the yield and seed moisture contents of nine hybrids. In the favorable crop year, the yield of every hybrid was the highest at the second and third sowing times. Yields of PR34H31 and PR38B85 hybrids were significant. The seed moisture content at harvest was higher than the previous year, due to the rainy season. In the case of hybrids sown later, this value was higher by 30%. However, we noticed that this value was lower at the earlier sowing time, than at the later.
    In 2005, we applied three sowing times. Unfortunately, the results of the third sowing time could not be analyzed, due to the low plant density. The yield of the six hybrids varied from 12 to 14 t/ha at the first sowing time. At the second sowing time, the yields fluctuated and each hybrid had the lowest yield, except the PR37D25 hybrid. At the latest sowing time, the yield of the PR34B97 hybrid was the lowest. However, this low yield was due to damage from the Western corn rootworm (Diabrotica virgifera) imago. The moisture content at harvest of the hybrids varied from 16 to 24% at the first sowing time. Yields at the second sowing time were higher. The low yield of the PR34B97 hybrid coupled with a higher seed moisture content. In addition, the maximum value of the LAI was more favourable at the first sowing time, and ranged between 5-5.5 m2/m2.
    The crop year had a more dynamic effect on maize than the sowing time. First of all, the quantity and distribution of precipitation played an important role in respect to yield safety.

  • Effect and interaction of crop management factors and crop year on the yield of maize (Zea mays L.)
    31-41
    Views:
    184

    The aim of this study was to determine the combination of treatment levels of crop management factors which can optimize and sustain maize yield under varying climatic conditions. The effect of winter wheat forecrop, three tillage systems (Mouldboard-MT, Strip-ST, Ripper-RT), two planting densities (60,000 & 80,000 plants ha-1), three fertilizer levels (N0-control, N80, N160 kg ha-1) with four replications in irrigated and non-irrigated treatments were evaluated over a five year period, 2015–2019. The obtained results revealed that growing season rainfall positively correlated with yield, whereas, temperature negatively correlated with yield. Impact of adverse weather on yield was less severe in biculture, irrigated plots, at lower planting density (60,000), lower fertilizer rate (N80) and in RT and ST, compared to MT. In years with favorable rainfall, yields of MT and RT were significantly (P<0.05) higher than ST. However, in a less favorable year, such as 2015, with 299 mm growing season rainfall and the lowest July rainfall (59% below mean) there was no significant difference (P>0.05) in yield among the three tillage treatments. Higher planting density (80,000), and fertilization rate (N160) in tandem with MT are treatments combination conducive for high yield under favorable climatic conditions, whereas, in years with low rainfall and high temperatures, RT and ST offer alternative to MT for optimum yield with 60,000 plants ha-1 and N80 treatment level. Crop year effect accounted for 20.7% of yield variance, fertilization 35.8%, forecrop 12.8%, plant density 3.4%, tillage 1.2% and irrigation <1%. It is conclusive that with proper selection of the appropriate levels of agrotechnological inputs the adverse effect of weather on yield can be mitigated.

  • The effect of crop year and agrotechnical factors on the yield of various maturity groups of Limagrain maize hybirds
    19-23
    Views:
    126

    The Limagrain maize hybrids in different maturity groups were examined at the Látókép Experimental Station of the Centre of Agricultural Sciences and Engineering, University of Debrecen on a calcareous chernozem soil with loam texture, between 2001 and 2007 in a multifactorial long-term field trial. Doses of fertilizers: 1 N:0.75 P2O5:0.88 K2O fixed proportion of NPK doses. The basic dose of nitrogen is 30 kg ha-1. The application of fertilization was 1, 2, 3, 4, and 5 times more than the basic dose, beside of untreated control. The long-term field trial is performed in none irrigated and in irrigated version.
    The goal of the study was to analyze the effect of precipitation (environment factor) in one hand, and to evaluate the effect of fertilization and irrigation (agrotechnical factors) on the yield of maize hybrids in different maturity groups in the other hand. At the same time I studied the effect of interaction of different factors on the yield of maize. 

    Analysis the yield of Limagrain hybrids revealed: the years considerably affected the level of the yield. In dry years the yield was 1.351 t ha-1 less, than in rainy years. As the effect of fertilization the yield increased, the statistically proved biggest increment was at level of 90 kg N ha-1. Evaluating the maturity groups, FAO 300 hybrids reached higher level of yield. 
    In non irrigated conditions in the average of the seven years 60 kg N ha-1 was sufficient to reach the maximum yield. The efficiency of fertilization on yield in irrigated version increased, 120 kg N ha-1 assured the reliable level of yield. 
    Without irrigation in comparison to the results of FAO 200 group, with the growth of FAO numbers the yield is increasing in all cases. The most significant increase was at FAO 300 (3.562 t ha-1). With irrigation the greatest difference in yield was in FAO 400 (+2.720 t ha-1) compared to FAO 200.

  • The effect of NPK fertilization and the number of plants on the yield of maize hybrids with different genetic base in half-industrial experiment
    103-108
    Views:
    178

    In our research we examined the effect of the hybrid, the nutrient supply, the number of plants and the abiotic factors (temperature, amount of precipitation) on the yield, crop quality and yield stability of maize. We devoted special attention to the natural nutrient utilization ability and fertilizer reaction of maize.

    The experiment took place in Hajdúszoboszló on chernozem soil, on a nearly 8 ha field. The size of one plot was 206 m2, this it was a halfindustrial experiment. We tested six hybrids with different genetic characteristics and growing seasons. I analysed the correlation between the nutrient supply and the yield of maize hybrids with control treatment (treatment without fertilization) and with N 80, P2O5 60, K2O 70 kg ha-1 and N 160, P2O5 120, K2O 140 kg ha-1 fertilizer treatments. Yield increasing effect of the fertilizer also depended on the number of plants per hectare at a great extent. The number of plants of the six tested hybrids was 60, 70, and 80 thousand plants/ha.

    In Hajdúszoboszló, in 2015 the amount of rainfall from January to October was 340.3 mm, which was less than the average of 30 years by 105.5 mm. This year was not only draughty but it was also extremely hot, as the average temperature was higher by 1.7 °C than the average of 30 years. In the critical months of the growing season the distribution of precipitation was unfavourable for maize: in June the amount of rainfall was less by 31mm and in July by 42 mm than the average of many years.

    Unfavourable effects of the weather of year 2015 were reflected also by our experimental data. The yield of hybrids without fertilization changed between 5.28–7.13 t ha-1 depending on the number of plants.

    It can be associated also with the unfavourable crop year that the yield of the six tested hybrids is 6.33 t ha-1 in the average of the stand density of 60, 70 and 80 thousand plants per hectare without fertilization, while it is 7.14 t ha-1 with N80+PK fertilizer treatment. That increase in the yield is only 0.81 t ha-1, but it is significant. Due to the especially draughty weather the yield increasing effect of fertilizers was moderate. In the average of the hybrids and the number of plants, increasing the N80+PK treatment to N160+PK, the yield did not increase but decreased, which is explicable by the water scarcity in the period of flowering, fertilization and grain filling.

    The agroecological optimum of fertilization was N 80, P2O5 60 and K2O 70 kg ha-1. Due to the intense water scarcity, increased fertilization caused decrease in the yield. As for the number of plants, 70 000 plants ha-1 proved to be the optimum, and the further increase of the number of plants caused decrease in the yield.

  • The Effect of Sowing Time and Plant Density on the Yield of MaizeHybrids
    95-104
    Views:
    71

    The crop technology of maize has two important elements, sowing time and plant density. In 2003 and 2004 we studied the effect of these two factors on the growth and production of maize in an experiment carried out near Hajdúböszörmény.
    The soil of the experimental plots was meadow soil.
    Weather in both years was differed greatly. 2003 was drought. Neither the distribution nor the quantity of the precipitation were suitable in the growing season for maize. This fact basically determined the results.
    In 2004, we could talk about a favorable and rainy season. The distribution and quantity of precipitation was suitable between April and September. The average temperature was also suitable for maize.
    Results of the sowing time experiment:
    In 2003, we tested seven hybrids at four sowing times. Hybrids in the early maturity group gave the highest yield at the later sowing time, while the hybrids of the long maturity group gave it at the earlier planting time. The yield of PR34B97, PR36N70, PR36M53 hybrids was the best at every planting time. The moisture loss of hybrids in the late maturity group was faster in the maturity season, but the seed moisture content was higher than the hybrids with early sowing time. The seed moisture content was very low due to the droughty year. In two hybrid cases, this value was higher than 20% only at the fourth sowing time.
    In 2004, we examined the yield and seed moisture content of nine hybrids. In the favorable crop year, the yield of every hybrid was the highest at the second and third sowing time. Yields of PR34H31 and PR38B85 hybrids were significant. The seed moisture content at harvest was higher than the previous year due to the rainy season. In the case of hybrids sown later, this value was higher by 30%. However, we noticed that this value was lower at the earlier sowing time than at the later.
    The crop year had a more dynamic effect on maize than the sowing time. First of all, the quantity and distribution of precipitation played an important role in respect to yield safety.
    Results of the plant density experiment:
    We tested the reaction of hybrids at four plant densities (45,000, 60,000, 75,000 and 90,000 stock/ha) every two years. In 2003, the tested seven hybrids reached the highest yield at the 90,000 stock/ha in the face of a droughty year. The effect of forecrop and favorable nutrients caused these results. In the rainy 2004 year, the yield grew linear with the growing plant density. The yield of the best hybrids were 14-15 t/ha at the 90,000 stock/ha.
    Such a high plant density (90,000 stock/ha) couldn’t adaptable in farm conditions in rainy season. It is practical to determine the interval of plant density besides the optimum plant density of hybrids which gave correct yield. The farmers have to use the low value of this interval due to the frequent of the droughty years.

  • The effect of and interaction between the biological bases and the agrotechnical factors on maize yield
    83-87
    Views:
    142
    The effect of and interaction between the biological bases and the agrotechnical factors on maize yield In our research, we examined the effect of the hybrid, the nutrient supply, the number of plants and the abiotic factors (temperature, amount of precipitation) on the yield, crop quality and yield stability of maize. We devoted special attention to the natural nutrient utilization ability and fertilizer reaction of maize. The experiment took place in Hajdúszoboszló on chernozem soil, on a nearly 8 ha field. The size of one plot was 206 m2; therefore, this experiment was half-industrial. We tested six hybrids with different genetic characteristics and growing seasons.
    We analysed the correlation between the nutrient supply and the yield of maize hybrids with a control treatment (treatment without fertilization) and with N 80, P2O5 60, K2O 70 kg ha-1 and N 160, P2O5 120, K2O 140 kg ha-1 fertilizer treatments. The yield increasing effect of the fertilizer also depended on the number of plants per hectare to a great extent. The number of plants of the six tested hybrids was 60, 70, and 80 thousand plants ha-1.
    In 2015, the highest yield was produced by hybrid P9241 with N80+PK and 70 thousand plants per hectare. With the N160+PK fertilizer dosage, the same hybrid responded the best, followed by hybrids P9486 and DKC4717. Using the same fertilizer treatment, the 80 thousand plants per hectare population density resulted in decrease in the yield with most of the examined hybrids. In 2016, with the increase in the number of plants per hectare, even with non-fertilised treatment (control treatment), the yield could be increased in the case of each hybrid.
    Averaged over the different hybrids and fertilizer treatments, applying 80 thousand plants ha-1 instead of 60 thousand resulted in 1.0 ha-1 yield increase. In 2017, the number of plants had a slighter effect. With N160+PK treatment, in most cases no significant difference can be observed. The value of LSD5%: plant number: 0.20 t ha-1, hybrid: 0.28 t ha-1, interaction: 0.48 t ha-1. With N160+PK treatment, the hybrids produced yields between 10.07 and 12.45 t ha-1. When examining the three years in the average of the number of plants, with treatment without fertilisation, the average yield of hybrids reached 7.53 t ha-1. With N80+PK treatment, this value was 9.71 t ha-1 and with doubling the fertilizer dosage, this value increased to 10.42 t ha-1. No economic profit was gained as a result of applying double dosage of fertilizer; therefore, the N80+PK dosage can be considered ideal.
  • Effect of sowing technology on the yield and harvest grain moisture content of maize (Zea mays L.) hybrids with different genotypes
    17-22
    Views:
    116

    From the aspect of the efficiency of maize production harvest grain moisture content shall be considered beside the amount of harvested grain yield. Hybrids with different genotypes and vegetation period length lose their moisture content different that is affected by row spacing and plant density – among agrotechnical production factors – depending on the given crop year. In the present research work three crop years with different weather conditions were studied (2013, 2014, and 2015). The small-plot field experiment was set up at the Látókép Field Research Centre of the University of Debrecen, Centre for Agricultural Sciences with four replications on a chernozem soil type. The effect of three factors was analysed in the experiment on yield amount and its moisture content. Factors were row spacing (45 and 76 cm), plant density (50, 70 and 90 thousand plants ha-1), while hybrids were of very early (Sarolta: FAO 290), early (DKC 4014: FAO 320, P 9175: FAO 330, P 9494: FAO 390) and medium (SY Afinity: FAO 470) ripening.

    In the crop year of 2013 the highest yield was produced – regarding the average of the hybrids – by the application of a row spacing of 45 cm (4.5%, 673 kg ha-1), however there was no significant difference between the yield of the populations of different row spacings. Significant difference (14.9%, 1751 kg ha-1; 6.3%, 583 kg ha-1) could be found in case of yield between different row spacing applications in 2014 and 2015. The effect of insufficiently distributed low amount of precipitation and lasting heat days in 2015 could be revealed in yield amounts and harvest grain yield moisture content results that were lower than in the previous years. In 2015 grain yield moisture content varied between 10.3 and 13.9% in case of a row spacing of 45 cm, while by 76 cm between 11.0 and 13.9%.

  • The effect of agrotechnological factors and the cropping season on sweetcorn (Zea Mays L. convar. saccharata Koern.) production in a humid year
    146-151
    Views:
    70

    We have examined the effect of three agrotechnological factors (sowing time, fertilization, crop density) and four genotypes on the yield
    of sweetcorn on chernozem soil in the Hajdúság region in 2009. The experiment was set up at the Látókép Research Site of the University of
    Debrecen. We have included two sowing times (27 April, 26 May), six nutrition levels (control, N30+PK, N60+PK, N90+PK, N120+PK,
    N150+PK) and four genotypes (Jumbo, Enterprise, Prelude, Box-R) at two crop density levels (45 thousand ha-1).
    In the humid cropyear of 2010 the amount of precipitation exceeded the 30-year average by 184 mm in the cropping season; the average
    temperature exceeded the same by 0.8 C on the average of the examined months. The circumstances were most favourable for sweetcorn
    production with the first sowing time, thus, this was when the yield of all hybrids was the highest.
    With early sowing time, the highest yield (23437 kg ha-1 yield) was obtained with Enterprise at 45 thousand ha-1 crop density level at
    N150 + PK nutrition level. The highest yield of the other three hybrids was 22253 kg ha-1 (Jumbo) 22286 kg ha-1 (Box-R) and 1873 kg ha-1
    (Prelude). With the second sowing time, the highest yield was obtained with Enterprise again (22237 kg ha-1) at 65 thousand ha-1 crop
    density level. With this sowing time the yield of Jumbo, Box-R and Prelude was 20888 kg ha-1, 17796 kg ha-1 and 17401 kg ha-1, respectively.
    We found that the highest yield was obtained at the highest nutrition levels (N120 + PK, N150 +PK) with the first sowing time, while the same
    was obtained at lower nutrition levels (N90 + PK, N120 + PK) with the second sowing time.

  • Effect of cultivation factors on the yield and yield security of maize
    263-265
    Views:
    119

    Cultivation factors have a significant effect on the yield and yield security of maize. Ensuring a suitable green crop is important. Tricultural crop rotation (pea–wheat–maize) in the average of 25 years provided a 2 t ha-1 higher yield compared to monocultural cultivation. A harmonious NPK nutriment supply determines yield and yield security, which can be especially realized by means of the application of precision cultivation technologies. Under average circumstances N 80 kg ha-1, P2O5 50 kg ha-1, K20 60 kg ha-1 active ingredient is the agro-ecological dosage of artificial fertilizer.
    Plant density is a factor that determines yield. Optimal plant density – beside the genetic characteristics of the hybrid – is mostly influenced by the level of water and nutriment supply.

  • Evaluation of the role of common vetch (Vicia sativa L.) green manure in crop rotations
    161-171
    Views:
    128

    Common vetch (Vicia sativa L.) is an annual legume, grown as green manure provide rapid soil cover, can increase soil moisture and organic matter content and reduce soil erosion during fall. During the fallow period, legumes grown as catch crops are known by releasing large amounts of mineral nitrogen (N) for the subsequent crop. By taking advantage of these benefits, it is possible to increase the yield of the next crop in an environmentally friendly and sustainable way. The goal of this study was to determine the value of common vetch as a green manure, considering its effect on soil conditions and the yield of next crops. We examined three different common vetch seed rate as a green manure in a crop rotation with triticale, oat and corn. Next to the green manured treatments, we used fertilized and bare fallow control treatment for comparison. In our study we evaluated the aboveground biomass weight of spring vetch green manure and its effect on the moisture content of the soil. We examined the green manure’s effect on the next crops plant height and yield. We found that the moisture content of the green manured plots was significantly higher during summer drought. On the green manured plots, 37.9% higher triticale yield, 50% higher oat yield and 44% higher corn yield were measured compared to the control plots. The insertion of spring vetch green manuring into crop rotations could be a good alternative to sustainable nutrient replenishment methods. It can be used to reduce the input needs of farming, reduce carbon footprint, contribute to the protection of soils and increase the organic matter content of the soil.

  • The effect of drought and cropping system on the yield and yield components of maize (Zea mays L.)
    51-53
    Views:
    119

    Different Cropping Systems have many advantages and ensure better crop growth and yielding. Its combination with other agronomic measures can ensure optimal crop density for maximum crop growth and photosynthesis efficiency. The aim of this study was to investigate the influence of different cropping systems on monoculture and biculture rotations [maize- wheat]. The study found that crop rotation does not have a significant effect on the grain nutrition quality, Leaf Area Index (LAI) and Normalized Difference Vegetative Index (NDVI) but has a significant effect on the Soil-Plant Analysis Development (SPAD). Yield and yield components were significantly influenced by crop rotation in this study as yield, plant height, cob weight and number of grains per row all recorded lower mean at 5% probability levels.

  • The Effect of Fertilization and Irrigation on Maize(Zea mays L.) Production
    26-29
    Views:
    108

    In a long-term field experiment set up at the Látókép experimental station of the Center of Agricultural Sciences of Debrecen University, the data of the last five years (1995-1999) were analyzed to determine the crop production factors with the greatest influence on maize production and the relationship and interactions between irrigation and fertilization.
    In the extremely dry year of 1995, fertilization was found to cause substantial yield depression in the absence of irrigation. According to results of analysis of variance, fertilization significantly reduced the maize yield by 40-90% compared to control plots. Under irrigated conditions, there was a considerable increase in the maize yield, the yield surplus being 4.4-9.4 t ha-1, depending on the nutrient supply level.
    During the period from 1996-1999, when rainfall conditions were favorable for maize, fertilization significantly increased the maize yield even without irrigation over the average of the four years. The yield surplus due to fertilization was 3.9-4.6 t ha-1, depending on the fertilization rates. The maximum yield surplus was obtained on plots fertilized with 120 N kg ha-1, while at the rate of 240 N kg ha-1 the maize yield did not differ significantly from this value. During the period examined, corn yield was significantly higher at all three nutrient supply levels as the result of irrigation than in the non-irrigated treatment. As in the case of non-irrigated conditions, the highest fertilizer dose did not result in a substantial yield increase. An analysis of the interaction between fertilization and irrigation indicated that the yield-increasing effect of fertilization was not significantly different under irrigated and non-irrigated conditions. The significant year x irrigation interaction was confirmed by the fact that the yield surplus (1.3-2.3 t ha-1) differed greatly from the irrigation effect recorded in 1995.

  • Impact of environmental changes resulting from different sowing dates on maize yield
    99-104
    Views:
    130

    Three Debrecen maize hybrids of different genotypes (Debreceni 285, Debreceni 377 and Debreceni 382) were examined on chernozem soil in a field experiment. During the two years of the experiment (2009–2010), we wanted to get to know how the examined hybrids reach to different sowing dates and what impact early, optimal and late sowing has on yield.

    In 2009, balanced soil and air temperature resulted in steady emergence. However, the low temperature in early April and the cooling down in mid-May 2010 caused a delayed emergence.

    The grain moisture content at harvesting and the high yield showed a strong crop year effect. In 2010, yield was much lower (1.664 t ha-1) and grain moisture was significantly higher (34%)than in 2009.

    In 2009, early sowing resulted in yield decrease (P<0.05), but it also significantly reduced grain moisture at harvesting (P<0.05). Although late sowing slightly increased yield (not significantly), but grain moisture at harvesting increased by 9.2%. In 2010, optimal sowing date was shown to be the best alternative from the aspect of yield, but there was no significant difference in comparison with early and late sowing. Grain moisture at harvesting greatly increased (13.3%).

    The Debreceni 382 maize hybrid reacted to sowing dates flexibly, neither early, nor late sowing affected its yield significantly and the grain moisture at harvesting showed 12% increase in the case of the late sowing date. In 2009, maize hybrids Debreceni 285 and Debreceni 377 reached their highest yield in the case of the sowing date which was shown to be optimal (23rd April), while the different sowing dates had no effect on yield in 2010.