Search

Published After
Published Before

Search Results

  • Evaluation of dry matter accumulation of maize (Zea mays L.) hybrids
    35-41
    Views:
    336

    The increase of the grain yield of maize is closely correlated with its seasonal dry matter accumulation. Dry matter is accumulated into the grain yield during the grain filling period. The following maize hybrids were involved in the experiment: Armagnac FAO 490, Loupiac FAO 380 and Sushi FAO 340. In order to determine dry matter content, two samples per week were taken on the following days: 22nd, 25th, 28th, 31st August, 4th, 7th, 14th, 18th, 22nd, 25th, 29th September and 2nd, 6th, 9th, 13th October. In the course of sampling the weight of 100 grains from the middle section of 4 ears was measured in 4 replications. Dry matter content was determined after drying to constant weight in a drying cabinet at 60 °C. Harvesting was performed on 13th October 2017.

    The daily precipitation sum was determined by local measurements, while the daily radiation and temperature data were provided by the Meteorological Observatory Debrecen of the National Meteorological Service in Budapest. Among the agrometeorological parameters, an analysis was made of the precipitation during the growing season, effective heat sums during the vegetative and generative phase, and the water supplies. The daily heat sums were determined using the algorithm proposed.

    The amount of precipitation in the winter period before the 2017 growing season was 210 mm. The soil was saturated until its field capacity. The rather dry and warm March and April had a favourable effect, but there was no worthy amount of precipitation until May (51 mm) due to the condition of the dried seedbed. Sowing was performed on the 5th of May 2017 in a randomised small plot experiment. There was favourable precipitation and temperature during the growing season, thereby providing ideal conditions for maize development, growth and yield formation. There was near average amount of precipitation in each year. The total amount of precipitation in the summer period is 342 mm. Temperature was mostly above the average, but there was no long and extremely warm period.

    The Armagnac hybrid reached its highest dry matter mass 126 days after emergence. Physiological maturity was reached sooner (on the 119th day) in the case of Loupiac, and even sooner in the case of Sushi (116th day). The thousand grain weight of Sushi (which has the shortest ripening period) was 286 g at the time of physiological maturity, while that of Loupiac was 311 g. Compared to Sushi, Armagnac showed 12 g more dry matter accumulation (306 g). In the case of all three examined hybrids, physiological maturity was preceded by an intensive phase, when the dynamics of dry matter accumulation was rather quick. On average, Sushi gained 2.8 g dry matter per day between 103 days following emergence and physiological maturity, while the same values were 3.2 g for Armagnac and 3.3 g for Loupiac. The aim of the regression line slope is to predict the behavior of the dependent variable with the knowledge of the values and characteristics of the independent variables using the regression line equation. Furthermore, to determine how the location affected the dynamic of dry matter accumulation in the Armagnac, Loupiac and Sushi hybrids. In regression analysis, the coefficient of explanation showed that the effect of day in the Armagnac was 97%, in the Loupiac 94%, in the Sushi 90 %. The determination coefficient (R2) is useful in determing how the regression equation fits. But, as we have seen, the determination coefficient alone is not sufficient to verify the model’s accuracy, in addition to the determination coefficient (R2), the normality of the data or the residuals, the variance of the variables at different levels, the independence of the data relative to time and non-oblique. Observations are evaluated for the correctness of the fitted model.

    Dry matter values decreased evenly and slightly following physiological maturity. According to our research results, it was established that physiological maturity is followed by a moderate dry matter loss. Until harvesting, Armagnac lost 40 g of its thousand mass weight in 29 days, while the same value pairs were 69 g in 36 days for Loupiac and 29 g in 39 days for Sushi. Loupiac – which had the highest weight at the time of physiological maturity – lost the most of its dry weight; therefore, Armagnac and Sushi had higher values at the time of harvesting.

  • Impact possibility of hedgerows on plant protection and on the yield of winter wheat
    95-101
    Views:
    139

    Agricultural hedgerows have various impacts on the surrounding cultivated area and on the landscape. They serve as a windbreak, help manage humidity and precipitation, and are also sources of plant species richness which can contribute to the animal biodiversity. One of their beneficial effects is the yield improvement of agricultural crops. Our investigation tries to prove this hypothesis in Hungarian circumstances in the case of several winter wheat fields near Debrecen. Regarding the results, it seems that the majority of data supports the relevant, mainly German and Austrian information, but in some cases, the correlation has not been significant.

  • The Impact of Water Supply on the Quality and Health of Potato
    144-147
    Views:
    103

    Besides its effect on potato yield, water also has a significant impact on yield quality. Excess water (too much precipitation, over-irrigation) and the lack of water (lack of precipitation or irrigation) both trigger stress in the plant and can significantly worsen the quality of the yield (seed potato) and deteriorate the health of the plant and the seed potato. Excess precipitaton or irrigation water leaches nitrate-nitrogen under the rhizosphere, consequently, the amount of available nitrogen decreases leading to the deficiency of N in potato. If water cover (the maximally saturated state of soil) exceeds 8-12 hours, it can cause root destruction (because of the lack of oxygen), which leads to the wilting and later to the death of the plant. Abundance of water caused by excess precipitation or irrigation is a major problem primarily on sandy loam, loam and clay loam soils with bad structure and water management qualities, but also on any soils, which are over-irrigated or irrigated at an improper time. Symptoms of the lack of water are detectable mostly when the available water content of the soil (disponible water) decreases under 60-65%.
    In the present year, there was a lack of precipitation on the Great Plain, which can be compensated by proper irrigation. Unfortunately, this problem is further intensified by the high temperature, which results in faster ripening and accompanied with fluctuating soil moisture content, in the formation of secondary tubers.

  • The efficiency of the different elements of spring barley growing organic technology in the conditions the eastern steppe of Ukraine
    209-213
    Views:
    127

    The effectiveness the use of new nutrient complexes is studied. It is set that a combination of nutrient complexes with organic and organicmineral nutrition background promotes to good growth and development of plants during the growing season, provides the best parameters of crop yield structure and the crop yield and economic efficiency of spring barley cultivation in the condition of the Eastern Steppe of Ukraine.

  • Determining elements of variety-specific maize production technology
    157-161
    Views:
    62

    Our aim was to work out such new maize fertilizer methods and models which can reduce the harmful effects of fertilization, can
    maintain the soil fertility and can moderate the yield fluctuation (nowadays 50-60 %).
    The soil of our experimental projects was meadow soil. The soil could be characterized by high clay content and pour phosphorus and
    medium potassium contents. In the last decade, out of ten years six years were dry and hot in our region. So the importance of crop-rotation
    is increasing and we have to strive for using the appropriate crop rotation.
    The yields of maize in monoculture crop rotation decreased by 1-3 t ha-1 in each dry year during the experiment (1983, 1990, 1992,
    1993, 1994, 1995, 1998, 2000, 2003, and 2007). The most favourable forecrop of maize was wheat, medium was the biculture crop rotation
    and the worst crop rotation was the monoculture.
    There is a strong correlation between the sowing time and the yield of maize hybrids, but this interactive effect can be modified by the
    amount and distribution of precipitation in the vegetation period. At the early sowing time, the grain moistures were 5-12 % lower compared
    to the late sowing time and 4-5 % lower compared to the optimum sowing treatment.
    There are great differences among the plant density of different maize hybrids. There are hybrids sensitive to higher plant density and
    there are hybrids with wide and narrow optimum plant densities.
    The agro-ecological optimum fertilizer dosage of hybrids with a longer season (FAO 400-500) was N 30-40 kg ha-1 higher in favourable
    years as compared to early hybrids.
    We can summarize our results by saying that we have to use hybrid-specific technologies in maize production. In the future, we have to
    increase the level of inputs and have to apply the best appropriate hybrids and with respect to the agroecologial conditions, we can better
    utilize the genetic yield potential.

  • Physiological traits and yield of three soybean (Glycine max (L.) Merr.) genotypes as affected by water deficiency
    11-15
    Views:
    179

    Soybean is a very important legume; it has the highest protein content, and it is a very important source of vegetable oil. Soybean is droughtsusceptible, and drought is one of the major abiotic stresses that has been increasing over the past decades as a result of the global climatic changes. To evaluate the influence of drought stress, three soybean genotypes were grown under rainfed conditions, and compared to irrigated controls. The obtained results showed that the chlorophyll content, leaf area index and plant height decreased under drought stress conditions, which led to noticeable and sometimes significant yield reduction. Our results suggest more specific studies on the physiological changes of the local soybean genotypes under drought stress to better select the adopted ones.

  • Role of some agrotechnical elements in the precision crop technology of cereals
    241-244
    Views:
    115

    The crop models and precision technology have an important role in the development of winter wheat and maize agrotechnics, which crops have determinative role in Hungarian crop production. The effects of agrotechnical elements (crop rotation, fertilization, irrigation, crop protection, plant density) were studied in our longterm experiments on chernozem soil. Our scientific results proved that the high yields, and good yield stability were obtained in the input-intensive crop models. Maize had lower ecological adaptive capacity than winter wheat. The optimatization of agrotechnical elements reduces the harmful climatic effects so we can increase the yield and yield stability of cereals agro-ecosystems. The yields of wheat varied between 2 and 7 t ha-1 in extensive and 8 and 10 t ha-1 in intensive crop models and the yields of maize ranged between 2 and 11 t ha-1 and 10 and 15 t ha-1, respectively.

  • The response of sunflower hybrids to different plant densities on a chernozem soil
    123-128
    Views:
    147

    In our experiment the reaction of six sunflower hybrids of different genotypes (NK Oktava, ES Biba, ES Diagora, ES Ballistic, EGH 8925, PR 64 H 42) towards plant density has been investigated by different fungicide treatments in the crop-year of 2011 on a chernozem soil. 
    In the crop-year of 2011 sunflower populations were infected by a significant Diaporthe helianthi disease. The extent of this infection was significantly enhanced by the increment of plant density. However, regarding the average of the hybrids and plant densities the two times executed fungicide treatment has decreased the infection rate by 22%. The most susceptible hybrid was the ES Biba. Contrarily, the hybrid ECH8925 proved to be the most resistant hybrid towards this
    disease according to our results. According to the results of the Pearson’s correlation analysis it has been revealed that stalk breakage and Diaporthe infection stand in a very close (r=0.782**) and middle close (r=0.523**) correlation resp. with plant density. The relationship between fungucude treatments and stalk breakage, just as Diaporthe infection showed to be middle and close respectively. Our results demonstrate the role of stalk and plate diseases (among them Diaporthe) in causing stalk breakage, for we have found a close positive correlation between stalk breakage and Diaporthe infection (r=0.624**) in our analysis.
    From the aspect of yield amount the optimal plant density varied between 45 000 and 55 000 plants per hectare. Fungucude treatments enabled not only the use of higher plants densities, but they had a yield increasing effect as well. In the crop-year of 2011 the highest yield (4 559 kg ha-1) on a chernozem soil has been measured in case of the hybrid ECH8925.

  • Effect of the crop-year on plant protection feature of sunflower
    71-75
    Views:
    156

    Our study focused on plant density reactions of sunflower hybrids on chernozem soil in years with different levels of available water (2011 and 2012). We studied factors (i.e.infections, yield) that are most affected by the amount of precipitation.

    However the amount of precipitation varied in 2011 (average amount of precipitation) and 2012 (drought), Sclerotinia and Diaporthe infections were significant in both years. Diaporthe was stronger in 2011 while in 2012 Sclerotinia infections were greater than average. Higher plant density provided for a favorable microclimate for pathogens meaning that increased stock density enabled enhanced infections. Maximum levels of infections in both the cases of Diaporthe and Sclerotinia were measured at a plant density level of 65 000 plants ha-1.

    2012 yields (control: between 2 289 and 3 261 kg ha-1, two-time treated: between 2 699 and 3 659 kg ha-1) were significantly lower compared to the results of 2011 (control: between 2 825 and 3 672 kg ha-1, two-time treated: between 3 059 and 4 059 kg ha-1). Fungicide treatments led to an increased yield in both years: 9.5% in 2011 and a notable, 15.1% growth in 2012. We applied regression analysis to calculate optimum plant density for the examined years and treatments. Based on the calculations we found that in the cases of both treatments optimum plant density was 53 000 plants ha-1, while in 2012 the optimum was higher due to lower level of infections: 56 000 plants ha-1 in the control stock and 64 000 plants ha-1 in the stock treated twice.

  • Growth and yield patterns of black locust (Robinia pseudoacacia L.) sample trees affected by site conditions: case studies
    125-128
    Views:
    32

    The trees removed from the long-term experiment plots are available for the measurements as lying trees. Through the determination of the volume in sections along the stem, the stem form, the stem volume and other factors can be specified. The comparison of the stems of individual trees of first and third yield classes of black locust (Robinia pseudoacacia L.) stands shows that site conditions have a main effect on the yield (mean tree volume). The difference can be as high as 53% at the age of 30 depending on the sites. To determine the growth patterns based on tree volume is rather a new approach in the light of the relevant literature. The obtained results also highlight the importance of choosing the appropriate tree species for a given site.

  • Results of foliar treatments on Sugar beet (Beta vulgaris L.)
    303-308
    Views:
    83

    The yield and quality of the sugar beet are mainly determined by the plant production system, thus we studied the effect of mineral fertilization. Our field trials were carried out in 2005 and 2006 in Hajdúböszörmény, at two sites. We studied the effect of sulphur (Cosavet DF), copper (Kelcare Cu) and two foliar nutrients with high active agents. Treatments were replicated four times.
    We took root samples at 4 week intervals, starting in August. The quality of root (sucrose, potassium, sodium and alfa-amino N content) was determined from filtrated beet broth, by an automatic beet laboratory system, called VENEMA.
    We found that the crop and the sugar yield were significantly influenced by the foliar treatments in both of the two years.

  • Growth and clorophyll content dynamics of winter wheat (Triticum aestivum L.) in different cropyear
    101-105
    Views:
    107

    The experiments were carried out at the Látókép experimental station of the University of Debrecen on chernozem soil in a long term winter wheat experiment in the season of 2011 and 2012 in triculture (pea-wheat-maize) and biculture (wheat-maize) at three fertilisation levels (control, N50+P35K40, N150+P105K120). Two different cropyears were compared (2011 and 2012).

    The research focused on the effects of forecrop and fertilisation on the Leaf Area Index, SPAD values and the amount of yield in two different cropyears. We wanted to find out how the examined parameters were affected by the cropyear and what the relationship was between these two parameters and the changes of the amount of yield.

    Examining the effects of growing doses of fertilizers applied, results showed that yields increased significantly in both rotations until the N150+PK level in 2011 and 2012. By comparing the two years, results show that in 2011 there was a greater difference in yields between the rotations (7742 kg ha-1 at N150+PK in the biculture and 9830 kg ha-1 at N150+PK in the triculture). Though wheat yields following peas were greater in 2012, results equalized later on at N150+PK levels (8109–8203 kg ha-1).

    Due to the favorable agrotechnical factors, the leaf and the effects of the treatments grown to a great extent in 2011, while in 2012 the differences between treatments were moderate. Until the N150+PK level, nitrogen fertilisation had a notable effect on the maximum amount of SPAD values (59.1 in the case of the biculture and 54.0 in the triculture). The highest SPAD values were measured at the end of May (during the time of flowering and grain filling) in the biculture. In the triculture, showed high SPAD values from the beginning. The same tendency could be observed in the 2012 cropyear, although increasing doses of fertilizers resulted in higher SPAD values until N150+PK level only from the second measurement. Maximum SPAD values were reached at the end of May in both crop rotation system

  • Site and hybrid-specific agrotechnical models in sweet corn production
    105-108
    Views:
    92

    The effect of three agrotechnical factors (sowing time, fertilization, plant density) and two genotypes on the crop yield of sweet corn was examined on chernozem soil in the Hajdúság region in two different crop years. Compared to the 30-year average, the climate was dry and warm in 2009 and humid in 2010. The experiments were conducted at the Látókép Research Site of the University of Debrecen. In the experiments we applied two sowing times (end of April, end of May), six fertilization levels (control, N30+PK, N60+PK, N90+PK, N120+PK, N150+PK) and two crop density levels (45 thousand ha-1, 65 thousand ha-1). The hybrids we used were Jumbo and Enterprise. As regards the requirements of sweet corn production, the crop year of 2009 was dry and warm. The effect of moisture deficiency was more adverse on the crop yields with the second sowing time. On the contrary, the other examined year (2010) was significantly humid; the precipitation was 184 mm above the 30-year average and the temperature was average.
    In the dry and hot crop year, the best yields were obtained with the hybrid Jumbo (25677 kg-1) at 65 thousand ha-1 plant density level on the average of the fertilization levels. The crop yields of Enterprise were also the highest at high plant density level (24444 kg ha-1). With the second sowing time the highest yields were obtained at the higher plant density level (65 thousand ha-1) with both hybrids (Jumbo 18978 kg ha-1, Enterprise 18991 kg ha-1), which confirmed the good adaptation capability of these hybrids at high plant density level. In humid crop year with early sowing time the highest yielding hybrid was Enterprise (at 45 thousand ha-1 crop density level 20757 kg-1), at the same time, Jumbo was best yielding at the higher plant density level (18781 kg-1). With the second sowing time the highest crop yield was obtained with Enterprise again (20628 kg ha-1 at 65 thousand ha-1 plant density level). With this sowing time the average yields of Jumbo, was 18914 kg ha-1 respectively. We found that dry crop year and early sowing time provided the best conditions for sweet corn production; the highest yields were obtained under these circumstances, which might be the results of the outstanding water management of chernozem  soils.

  • Effects of water deficit on the growth and yield formation of maize (Zea mays L.)
    143-148
    Views:
    148

    Maize (Zea mays L.) is the most important consuming cereal crop in the world after rice and wheat. This requires an understanding of various management practices as well as conditions that affect maize crop performance. Water deficit stress during crop production is one of the most serious threats to crop production in most parts of the world and drought stress or water deficit is an inevitable and recurring feature of global agriculture and it is against this background that field study of crops response to water deficit is very important to crop producer and researchers to maximize yield and improve crop production in this era of unpredicted climatic changes the world over.
    A pot experiment was carried out to determine the effects of water deficit on growth and yield formation of maize. Two maize cultivars were used Xundan20 and Zhongdan5485. Three levels of soil water content were used in two stages of water control levels at two stages of the maize plant development
    1. The JOINTING STAGE: A. CONTROL (CK) soil water content: from 70% to 80% of soil water holding capacity at the field, soil water content: from 55% to 65% of soil water holding capacity at the field, soil water content: from 40% to 50% of the Soil water holding capacity at the field.
    2. The BIG FLARE PERIOD: A. CONTROL (CK) soil water content: from 75% to 85% of soil water holding capacity at the field, soil water content: from 58% to 68% of soil water holding capacity at the field, soil water content: from 45% to 55% of the soil water holding capacity at the field.
    This research mainly studied the effects of water deficit on physiological, morphology and the agronomical characteristics of the maize plant at the different water stress levels.
    The importance of these results in this experiment will enable plant producers to focus and have a fair idea as to which stage of the maize plant’s development that much attention must be given to in terms of water supply.

  • Test Results of Winter Wheat Varieties in 2002/2003 in the Hajdusag
    59-64
    Views:
    82

    We examined 35 early, 32 mid-season and 12 mid-late winter wheat varieties on calciferous chernozem soil after sunflower green crop in 2003. We set-up the experiment on small-size parcels, with 4 repetitions. In addition to the favourable agrotechnical conditions, with this year’s extreme ecological conditions the varieties resulted in weaker yields (2500-3200 kg/ha). Our findings have proven that there is a significant difference both between the maturity groups and between the yield potential of varieties with different genotypes, inside each group. Early varieties showed lower yield potentials according to the other two groups. The differences between the various variety’s yields was the smallest in the mid late group (893 kg/ha). Under given ecological and agrotechnical conditions, the following varieties showed the relatively best yields and best adaptability:
    • early maturing varieties (3200-3700 kg/ha): Mv palotás, KG Magor, Mv Mambo, Mv Emese, GK Margit, GK Tündér, GK Csongrád, GK Attila, Mv Amanda, Ukrainka;
    • mid season varieties (3300-3800 kg/ha): Győző, GK Marcal, Róna, GK Rába, Buzogány, MF Kazal, GK Mura, Hunor, GK Cipó, Mv Magvas, Mv Vilma, GK Zugoly, Jubilejnaja 50;
    • mid-late varieties (3200-3600 kg/ha): Maximus, Complet, KG Kunhalom, GK Holló.

  • Application of AquaCrop in processing tomato growing and calculation of irrigation water
    183-187
    Views:
    293

    The area and volume of processing tomato production is increasing in Hungary. Irrigation is crucial for processing tomato growing. To save water and energy, it is important to know exactly how much water is needed to reach the desirable quality and quantity. AquaCrop is a complex software, developed by FAO, which is able to calculate irrigation water needs, several stress factors and to predict yields. A field experiment was conducted in Szarvas in processing tomato stands, under different irrigation treatments. These were the following: fully irrigated plot with 100% of evapotranspiration (ET) (calculated by AquaCrop), deficit irrigated plot with 50% of ET (D) and control (K) plot with basic water supply was also examined. Dry yield, crop water stress index and soil moisture were compared to modelled data. The yields in the plots with different access to water were not outstanding in the experiment. The model overestimated the yields in every case, but the actual and modelled yields showed good correlation. AquaCrop detected stomatal closure percentages only in the unirrigated plot. These values were compared to CWSI – computed from leaf surface temperature data, collected by a thermal cam in July – and showed moderately strong correlation. This result suggests that Aquacrop simulates water stress not precisely and it is only applicable in the case of water scarcity. Soil moisture data of the three plots were only compared by means. The measured and modeled data did not differ in the case of K and ET plots, but difference appeared in the D plot. The obtained results suggest that the use of AquaCrop for monitoring soil moisture and water stress has its limits when we apply the examined variables. In the case of dry yield prediction overestimation needs to be considered.

  • Productivity of thinned black locust (Robinia pseudoacacia L.) stands in Hungary: case studies
    181-186
    Views:
    95

    Black locust (Robinia pseudoacacia L.) is one of the most important introduced tree species in Hungary, covering more than 24% of the stocked area and providing approximately 20% of the country’s annual timber cut. Consequently, the research and development activities related to the improvement of the growing technology of black locust are also important, especially in mitigating the negative effects of climate change. The aim of this study was to quantify growth and yield, responses of even-aged 12–31–year–old black locust stand to thinning in Hungary. The study has proved that irrespective of the yield class, age and thinning intensity, thinning could not increase effectively the cumulative volume production. As percentage of the control it has changed between +0.6 and -8.4%. On the other hand, it could increase the stand value based on stem quality index by 10–21%.

  • Effect of net shading technology on the yield quality and quantity of chilli pepper under greenhouse cultivation
    5-9
    Views:
    226

    This study was undertaken to identify the effect of net shading technology on the total capsaicinoids, vitamin C and relative chlorophyll content expressed as SPAD (Soil Plant Analysis Development) values and total marketable fruit yield of ‘Star Flame’ chilli pepper (Capsicum annuum) for two harvesting times cultivated under modified atmosphere. ‘Star Flame’ pepper was grown under three (3) different net shading colours (white, red and green). Samples without net shading were used as control. Samples were subjected to chromatographic analyses using HPLC for the determination of total capsaicinoids and vitamin C. Interaction in shading technology and harvest times (p=0.010) had significant effect on total capsaicinoids as a result of green and white shading technologies showing higher differences when compared to control samples. Vitamin C content was observed to have increased in white and red shadings (p=0.001) after the first harvest and gradually decreased after the second harvesting time (p=0.002). Relative leaf chlorophyll content was significantly higher in white shading in the first and second harvest. Samples used as control had significantly higher marketable values when compared to white and green shadings with red recording low marketability of ‘Star Flame’ chilli peppers.

  • Vegetative shoot growing and yield productivity of different plum cultivar and rootstocks combination
    25-29
    Views:
    113

    We planted containers plum rootstocks and cultivar combinations for irrigation and rootstocks experiment. We planted Cacanska lepo tica, Katinka, Jojo, Topfive, Toptaste, Topper plum cultivar on Mirobalan, St Julien A, St Julien GF 655/2, Wavit, Wangenheim, and Fereley rootstocks. Before budding we measured the trunk diameter on trees, than I count the trunk cross area, we measured the high of trees, the high of crown, and the wide of crown, and counted the volume of crown from these data. We conclude the vigorous from the trunk cross area and the volume of crown. In the started growing less vigorous combinations look like Topfive/Wavit, Jojo/Mirobalan and Katinka/Mirobalan grafted on the basis trunk cross area and the volume of crown. In the vegetative period we measured the shoot growing on model branch every started of months. So we could determine the growing tendency. The smallest growing was Cacanska lepotika/Mirobalan. 
    In the flowering the grafted flowered in rich, excepted the Topfive cultivar on St Julien A, St Julien GF 655/2, and Fereley rootstocks, these didn’t flowered. The Topfive/Wavit combinations there were a richest flower. 
    In the harvest term we could pick up plum fruits from Topfive/Wavit combinations, and Cacanska lepotica, Jojo, Toptaste cultivar. And in addition the Topper cultivar was the highest yield on their all of rootstocks.

  • Essential oil extraction from herbs and their use in the food industry
    59-74
    Views:
    343

    Essential oil extraction of wild caraway and thyme was performed using a classical (HD) and microwave hydro-distillation (MWHD) and a laboratory supercritical fluid extraction (SFE) with a carbon dioxide as solvent. Our experiments demonstrated that the extraction yield of the essential oil performed in same conditions was influenced by the location of growth area; the maximum extraction yield of 10 ml 100 g-1 caraway was obtained from dried seeds collected from Csíkmadaras. This quantity far exceeded the yield of the Újtusnád samples. In the case of wild caraway (Carum carvi L.), the extraction method influenced thecomposition of the essential oil (carvone/limonene ratio), the highest limonene content being achieved by classical hydro-distillation. In the case of thyme, this effect was not detected, the thymol/carvacrol ratio was independent from the given extraction method. The obtained thyme essential oil possesses high antimicrobial activity demonstrated by agar diffusion test. The thyme extract provides a good protection against microorganisms collected on the surface of fresh vegetables following bacterial stains: Citrobacter portucalensis, Pseudomonas hunanensis, Pseudomonas baetica, Pseudomonas parafulva, Bacillus mojavensis and Enterobacter cloacae. Protective effect was also detected on the vegetable surface of by chitosan-based edible film coating during a 6-day-long storage period at a temperature of 4 °C. The caraway essential oil used as soft cheese seasoning with a direct, dilution-free method, proved to be unsuitable because the uneven distribution and confer a strong, unpleasant taste to the product in comparison with the ground wild caraway seed-dressed cheese.

  • The Role of Cultivation Systems in Quality Sugar Beet Production
    134-138
    Views:
    87

    Producing sugar beet, as it is a demanding field crop, has contributed to the raising standard of plant production. It has an outstanding place among the plants that are cultivated in the intensive plant production system. Rentability of sugar manufacture is determined by the stability of yield and the quality (saccharose content) of sugar beet. In this way, the fundamental interest both of the producers and the processing industry is high yield and quality, year by year. The yield and the quality of the sugar beet are mainly determined by the plant production system, so we studied the effect of fertilization, irrigation and plant protection.

  • Optimalization of nutrient supply and row space in the growing of annual caraway
    135-138
    Views:
    61

    Concerning the nutrient supply, it was found that the highest crop was produced with the N80K0 treatment (81.38 g m-2). The K application resulted in a decrease in crop yield. The highest crop yield per plant was found in plots with 48 cm row space. The best germination was reached in the plots with 48 cm row space (73%).
    If the level of K was elevated, the essential oil content increased. The maximum essential oil content was reached by treatment N0K80 (2.6284 ml 100 g sza.-1). The composition of essential oil was influenced both by the nutrient supply and by the growing area. Increasing the row space the ratio of d-carvone decreased. The amount of d-carvone was uniquely increased by use of K. The highest carvone level (66.25%) was identified at the N80+70K80 treatment as an average of row spaces.

  • The effect of zinc fertilization on the yield and element content of ryegrass
    27-31
    Views:
    108

    The effect of Zn fertilization on the yield and Zn, N, P, K, Mg and Mn content of ryegrass was studied in a greenhouse experiment for 8 chernozem soils with three replicates under uniform NPK supply and irrigation. The applied Zn rates were 0, 2.5 and 5 mg/kg Zn. Due to Zn doses the yield incrased significantly. Zn fertilization increased the plant Zn content and decreased the plant P and Mn content significantly. For N, K and Mg there was no significant effect.

  • Effect of NPK fertilization on the yield and yield stability of different maize genotypes
    101-104
    Views:
    117

    The yielding capacity and quality parameters of 11 maize hybrids were studied in 2011 on calcareous chernozem soil in a 25-year long-term fertilization experiment in the control (without fertilization), in the base treatment of N 40 kg ha-1, P2O5 25 kg ha-1, K2O 30 kg ha-1 and in five treatments which were the multiplied doses of the base treatment. The N fertilizer was applied in the autumn and in the spring, while P and K fertilizers were applied in the autumn.The sowing time was 17–18 April, the time of harvest was 8 October. The 30-year average of precipitation (April–Sept) was 345.1 mm, the amount of precipitation did not differ greatly from that, however, its distribution was very unfavourable.
    It was found that the largest yield increment (as compared to the control) was in the treatment N 40 kg ha-1, P2O5 25 kg ha-1, K2O 30 kg ha-1 in the long-term experiment. The largest yields were obtained for the hybrids P9494, PR37N01 and PR35F38 (13.64–13.71 t ha-1). Due to the dry period at the end of the summer – beginning of autumn, the grain moisture content at harvest was favourably low, 12–18% depending on the treatment and the growing season.

    The N fertilization significantly increased the protein content of the kernel, but the starch content of the kernel decreased (significantly in several cases) with increasing fertilizer doses and yields as compared with the control.
    The highest protein content was measured in hybrids GK Boglár and Szegedi 386. The oil content was above 4% for GK Boglár, but the two hybrids were not among the best yielding hybrids in spite of their good inner content. The starch content was around 75 % without fertilization, it decreased with fertilization.
    For the tested hybrids, the fertilizer dose N 120 kg ha-1, P2O5 75 kg ha-1, K2O 90 kg ha-1 can be recommended with respect to efficacy and environmental considerations.

  • Examination of Possibilities for Increasing Sugar Content
    202-206
    Views:
    33

    The result of sugar beet production is highly effected by the quality and the yield. Those agricultural techniques are very important which can be applied at low cost to improve these parameters. Such an opportunity is to increase sugar yield by foliar fertilization with nutrients and by treatment with bioactive fungicides.
    In my small block trial I examined the effect of the magnesium and strobilurin active ingredients in different combinations and at different application times on the quality and the yield of sugar beet.
    I found that there was a signifficant increase in sugar content on that blocks which were treated with a bioactive ingredient combined with magnesium in the middle of July and on those which were sprayed with bioactive ingredient in August.