Search
Search Results
-
Results of a Fertilization Experiment Performed with Sulphur on Rape Seed Plants
116-119Views:109The sulphur fertilizing experiment was introduced in the cropping year of 2001/2002, with winter rapeseed. The experiment was performed on a farm in Magyarhomorog, Hajdú-Bihar County. By selecting the location for the experiment, we had to consider the effect of the hard winter that was very unfavourable for rapeseed production, as there was serious frost damage on the sown area previously used for the experiment. In the arable land experiment, results of three different doses of treatment were compared in two replicates, on meadow soil. FitoHorm 32 S solution was used as a sulphur fertilizer, in doses of 3, 6 and 10 l/ha. Evaluating the results, we tried to find a correlation between the amount of fertilizer and the amount of seed-crop or the oil content of the seed. The nitrogen and sulphur contents of the samples were determined using classical methods and an Elementar VarioMax analyser. By this way, it was possible to examine not only the role of Sulphur in rapeseed production, but also to compare and evaluate results obtained by Kjeldahl and the modern, environmentally-friendly combustion method.
-
Influence of Foliar Treatments on the yield and quality of Sugar Beet
119-123Views:80The yield and quality of the sugar beet are mainly determined by the plant production system, thus we studied the effect of mineral fertilization. Our field trials were carried out in 2005 in Hajdúböszörmény, at two sites. We studied the effect of sulphur (Cosavet DF), copper (Kelcare Cu) and two foliar nutrients with high active agents. Treatments were replicated four times.
We took root samples at 4 week intervals, starting in August. The quality of root (sucrose, potassium, sodium and alfa-amino N content) was determined from filtrated beet broth, by an automatic beet laboratory system, called VENEMA.
We found that the crop and the sugar yield were significantly influenced by the foliar treatments -
Response of sugar beet to different foliar fertilizers
127-136Views:93The yield and quality of the sugar beet are mainly determined by level crop production system; therefore the effects of foliar fertilization were studied. Our field trials were carried out in 2005 and 2006 in Hajdúböszörmény, at two experimental sites. In our trials the effects of Biomit Plussz, Fitohorm and Kelcare Cu (having high Cu content) as foliar fertilizers, as well as a fungicide with high sulphur content, Cosavet DF, were studied and
compared. Effects of treatments were studied in four replicates.
We took root samples at 4 week intervals, starting in August. The quality of root (sucrose, potassium, sodium and alfa-amino N content) was determined from filtrated beet broth, by an automatic beet laboratory system, called VENEMA. Leaf samples were taken three times in the growing season, element composition was measured by ICP-OES.
We found that the crop and the sugar yield were significantly influenced by the foliar treatments both of the two years. -
Effects of Cropping Year and Artificial Fertilization on Alveographic Quality of GK Öthalom Winter Wheat Variety
126-133Views:89Qualification of winter wheat became more complex for Hungary, after the expansion of the EU. Use of Chopin alveograph is a general method in Western- and Southern Europe. This method is not traditional in Hungary, so determination of alveographic properties of Hungarian winter wheat varieties is very important. Artificial fertilization is one very important component of applied agricultural engineering, which effects winter wheat quality. The another factor is the weather or rather the cropping year, which effects winter wheat quality too. We examined both of them and the alveographic quality of GK Öthalom winter wheat variety between 1996 and 2003.
We found that cropping year has significant effect on the alveographic quality of GK Öthalom winter wheat variety on each treatment of artificial fertilization. We found no connection between quantities of precipitations of vegetation periods and the W values of GK Öthalom.
We found a strong connection in 1999 and 2003 as well as a very strong connection in 1996, 1997 and 2002, between the increase of fertilizer dose and W values of GK Öthalom. Treatments of artificial fertilization had a significant effect to W values of GK Öthalom in 2001 and 2002. The differences between the two methods are because of large standard deviation of the results. -
Studying of quality parameters of Hungarian and Greek honey samples
147-153Views:146Honey has been a valuable food for mankind since ancient times. It was the only sweetener until the start of industrial sugar mass production. Honey plays an important role in our nutrition and its positive effects on health are well-known. The quality of Hungarian honey is perfect, so it is very important to safeguard and monitor its quality continuously and to build up a good traceability and quality assurance system. For such a system, it is necessary to study the nutritional properties and the origin of different honey samples. In our study, we study Hungarian and Greek honey.
-
Research on rheological characteristics of winter wheat varieties
266-272Views:113The gluten examination test is dominant in Hungary, comparing it to the qualification system of other countries. The determination of alveographic parameters is a basic criterion of winter wheat specifications in some western and southern European countries.
In the Hungarian and foreign winter wheat qualification systems, in the standards, there is no limit for extensographical parameters. Customers dictate the limits and make their claims as to the specifications.
We analyzed the alveographic and extensographical parameters of 19 winter wheat varieties grown by the Cereal Research Non-Profit Company in Hungary, and we made a comparison between the results in the challenges of the European Union expectations.
Examining the information of alveographic and extensographical values, we found that the experimental varieties provide high base to flour types suitable for baking bread and baker’s ware. The GK Élet, GK Petur, GK Memento, GK Csillag, GK Kapos and GK Marcel varieties can meet the market of paste flour needs, too.
In the variety series, the GK Kalász represents the highest values and the GK Garaboly shows the lowest parameters regarding the alveographic W and the resistance to extension.
On the basis of relation, we can establish that we can estimate the following little known and used quality indexes: the extensographical resistance to extension with extensographical energy and the alveographic W value, the extensographical energy with the alveographic W value and the alveographic P and L values with the other alveographic parameters. -
New possibilities to determine wheat quality parameters by near-infrared spectroscopy
65-69Views:139Analyses and methods in wheat quality determination require more sample, time, work and cost, thatswhy flour quality control needs rapid, reliable tools. Near-infrared spectroscopy has many advantages, which make it suitable in quality control. NIR instruments need calibrations to their work. In our study we examined gluten content, falling number, valorigrpahic waterabsorption, alveographic P/L and W value of wheat samples. Modified partial least squares analyses on NIR spectra were developed for each property. The results show that we got such calibration modells, which are able to predict the properties (expect falling number) with enough accuracy.
-
Molybdenum - accumulation dynamics of cereals on calcareous chernozem soil
81-85Views:97This work is about the molybdenum-accumulation of cereals analyzing soil and plant samples from a field experiment set in
Nagyhörcsök by Kádár et al. in 1991.
In this long-term field experiment different levels of soil contamination conditions are simulated. Soil and plant samples were collected
from the experiment station to study the behaviour of molybdenum.
In this report results of maize, winter wheat, winter barley and soil analysis are presented. The conclusions are as follows:
– Analysing soil samples from 1991 we have found that roughly half of the molybdenum dose applied is in the form of NH4-acetate+EDTA soluble
– Comparing element content of grain and leaf samples we have experienced that molybdenum accumulation is more considerable in the vegetative plant parts
– Winter wheat accumulated less molybdenum then maize in its vegetative parts. Comparing molybdenum content of winter wheat to winter barley we found that the concentration of the element in wheat was lower by half than in the winter barley. It seemed that molybdenum accumulated to the least degree in winter wheat. -
Comparison of alveohraph and extensigraph properties of winter wheat samples
27-30Views:100The rheological properties of dough are determined by the amount and proportion of gliadin and glutenin proteins. Extensibility and resistance to the extension of doughs which can be measured using the extensigraph or alveograph allow good assesment of the baking behavior under realistic conditions. In our study, we compared the extensigraph and alveograph parameters of 87 flour samples. The results showed that the alveograph parameters were different from the extensigraph parameters. The classification of wheat varieties was different, and the order of varieties, as well. The alveograph properties were affected by other factors than the extensigraph properties, except the W value. The two rheological tests did not give similar results, therefor neither test are replaceable.
-
Molecular Biological Approach of Crocus sativus L. and its Allies
112-115Views:120The hay saffron (Crocus sativus L.) is a sterile triploid plant, known in human culture only, with no fertile seeds produced. The origin of saffron is still a mist, however it is assumed to be an autopoliploid mutant or a hybrid. The recent classification and most of the former taxonomic publications define C. sativus to be derived from C. cartwrightianus, a wild species. Because of the sterility of hay saffron it seemed to be reasonable to apply molecular biological methods to complete classical taxonomic studies in examining its relations. The DNA polymorphism based AFLP method has confirmed the close relationship between these species.
-
Application of the SDS-PAGE method for the characterisation of winter wheat flour quality
112-118Views:101The principle, development and importance of the SDS-PAGE method are presented in this article. The SDS-PAGE method has become one of the basic methods of molecular biological research, because it is widely applicable and its sensitivity is excellent in the separation of wheat storage proteins.
We have shown the application of this method with a concrete example. It was also tested whether, it was possible to obtain a better baking quality product from a large amount of poor quality less valuable wheat by fractioning the flour according to particle sizes after grinding. We studied the rheological properties of flours with different particle size fractions from the original flour. The baking quality of the original flour was B2. The 125-90 and 90-63 μm fractions have significantly better baking quality (B1) than the original flour. The protein contents of these flour fractions were also significantly higher than the protein content of the original flour. We had a question: what has influenced the baking quality: the protein content or other factors? We searched for an explanation on these results in the protein composition of the flour samples. We studied the distribution of glutenin-fractions by SDS-PAGE method and evaluated them. We found with correlation analysis that the amount of LMW-Glutenin D-group (52-60 kDa) is in a strong, negative correlation to the baking quality (r = – 0.855*). Therefore, the baking quality of flour samples was influenced by this glutenin fraction. -
Parameter optimization of an inductively coupled plasma mass spectrometer for measuring arsenic and selenium
81-85Views:143In the last decades, an increased interest has evolved in arsenic and selenium. The aim is to understand the environmental, agricultural and biological roles of these elements. In the case of arsenic, the major reasons are the relatively high concentration of arsenic in marine biota (mg kg-1) and the arsenic contaminated drinking water bases of some Asian countries, as well as Hungary. The toxicity of higher level selenium content is also known; nevertheless, selenium is essential for several biological functions. Considering its essentialness, in our country, the insufficient selenium intake rate causes a lack of selenium. Measuring the concentrations of these elements provides crucial, but unsatisfactory information, as the speciation, i.e. the form of an element presented in a sample is also required.
In both cases, the most suitable method to determine concentration is inductively coupled plasma mass spectrometry (ICP-MS). Our objective was to optimize the variable parameters of the ICP-MS to attain the lowest (the best) detection limit. For this purpose, we investigated the effect of parameter change on net signal intensity and relative signal intensity. With the optimized parameter settings, the limits of detection for arsenic and selenium were determined, which are 0,032 ng dm-3 for arsenic, and 0,097 ng dm-3 for selenium. -
Application of the Collision Cell (CCT) in the ICP-MS Analytical System
120-125Views:130Our laboratory has seen a sharp rise in the number of requests for the analysis of smaller and smaller concentrations of elements from foods, plants, soil, organic fertiliser, irrigation and ground water, sewage, sewage sludge, raw material of food, as well as human and animal origin samples. From the above elements the inductively coupled plasma mass spectrometer is capable of analysing the smallest concentration of elements. Our method of analysis is to use our ICP-MS instrument, together with a ICP-MS with Collision Cell Technology (CCT). The CCT method has better detection limit, with 1-3 magnitudes, compared to the normal ICP-MS analytical method. The CCT has better detection limits mainly for the following elements in the periodical system: analysis of arsenic, selenium, germanium, vanadium and chromium. Additionally a collision cell can be applied for the analysis of silicium, sulphur, zink, copper, iron, calcium, magnesium and potassium in smaller concentrations.
-
Study of effects on quality of different wheat flour fraction
123-129Views:96Wheat is one of the most important cereals in the world and the bread made of its flour belongs to the everyday life of human mankind.
The Hungarian standard relating to the laboratory production of wheat flour (MSZ 6367/9-1989) does not mention the type of laboratory mill used for milling, and it only builds up some general criteria, such as: the laboratory mill should be provided with four differently nicked barrels, a sieve with appropriate hole sizes, and also with the separated collections of the pilot flour and the bran. Our study was started at this point and the answers for the following questions were aimed to be found: do the flour patterns studied and produced with different grinding and sieving
techniques, widely used in laboratory mills of the same wheat pattern show any alterations after the impact of the formula production as regards chemical constitutions and reologic parameters. Various flours and whole grains of the wheat patterns sieved with different particle sizes were studied in this experiment. In producing this pattern two different mill types of FQC 109 and CHOPIN CD 1 as well as two different grinder types such as PERTEN 3100 and type of RETSCH 200 were applied. There were 3 different corn sizes of 160; 250; 800 μms used in the partition of the fractions. To study the differences the following measurements were conducted: dry matter, ash, protein content, wet gluten content, gluten index, gluten expansiveness, farinographic value, falling number and amilographic rate.
The results this research confirm that the quality of wheat flour can be modified by different methods of pattern production. In all cases the differences can be explained by the flour-bran ratio, and in some of the cases the higher germ content of the fractions also played a role. The results show differences between the various types of mills and grinders, too. -
Food safety of plant origin food
161-164Views:154Expectation regarding changes related to food production, transportation, distribution and marketing have changed considerably in several regions of the world over the past decades. It is especially true for highly industrialized countries where not only the food security is important but the food safety is essential too. The concentration of production – processing – distribution involves the danger on the one hand products of unsuitable quality from point of view of nutritional physiology and the other hand ones that may contain substances harmful to human health will become widespread among consumers. We investigated the heavy metal, pesticide remains and mycotoxin content of different plant products.