Search

Published After
Published Before

Search Results

  • Sustainable food production with greenhouse technologies
    99-105.
    Views:
    194

    The greenhouse fruit and vegetable production is one important area which supports sustainability. To achieve
    sustainable economy and growth, the given natural resources have to be used in a smarter, renewable way in order to avoid
    depleting them. New technologies and new methods are developed and implemented to utilize resources in more optimized way.
    Sustainable food supply is essential globally for the world, however it has to be managed and achieved on local levels. We present
    the greenhouse production market restructuring with new players. What kind of difficulties arise in the open field vegetable
    production and what benefits can be realized by the customers and producers from the covered greenhouse technology in the
    continental and desert climate? What are the technical boundary conditions to establish and operate greenhouse production in
    different regions and what are the benefits realized from local food production? As an example, we analyse Qatar’s energetics,
    climate conditions and food resources, Qatar’s food supply process and its barriers. We will show how the sustainability and
    food safety appear in Qatar’s National Strategy Plan.

  • Hydroponic pepper growing on baked clay pellets
    37-40.
    Views:
    186

    Nowadays one of the most important issues of greenhouse vegetable production in soilless media is the protection of the environment, in particular, the selection of the root medium to be applied. The objective of the trial was to test the applicability of baked (expanded) clay granules in hydroponic pepper growing with special respect to the growing pot (plastic tubes and buckets with bottom and lateral holes). From the result of the experiment it can be concluded that baked clay pellets, similarly to rockwool, are a suitable medium for providing root anchorage for pepper, however, it is necessary to examine some technological issues (e.g. fertilization, irrigation) prior to starting a large scale commercial cultivation. Relative to the three growing containers tested, it can be concluded that with the 4-8 mm crushed clay pebbles cultivation can be carried out successfully both in the white plastic tube and in the bucket, with the latter it is recommended to locate the drainage holes on the side of the growing container (at 6 cm from the bottom of the bucket).

  • Scheduling of ornamental plant production
    76-86.
    Views:
    128

    The production of ornamental plants represents an important branch of our horticulture. The growing area is relatively small (round 2800 ha), the production value, however, a rather large. Notwithstanding, its financial balance is inactive because the demand surpasses the supply copiously.

    The most popular plants are as follows: carnation, gerbera, rose, bulbous flowers, chrysanthemum, other cutflowers, cutgreens and Gypsophyla — their total production value makes up to Ft 8-9 billion. The area of ornamental nurseries — about 800-900 ha — is to be found mostly on the western part of our country.

    Our accession to the EU will have undoubtedly an impact on our ornamental plant production. We must take into account, that in greenhouse production the specialization extends all over the world, field production over a limited region. Our chances will not deteriorate by joining the EU. The buyer — chiefly because of ecological purposes — will prefer the domestic product to the foreign one. By the way, our products will be competitive, as far as quality or price is concerned, with those of western Europe. Last but not least, we may hope a greater saleability of home-bred, special varieties and cultivars, the so-called "hungaricums", both in the domestic as well as export markets. It is anticipated that we will have a good turnover with potted ornamental plants and flower seedlings. Our nursery products will become marketable too.

    To exploit the opportunity, of course, the necessary conditions are to be created. First of all, we need development in research, with special regard to breeding, at the same time in education, in extension service, in the training of experts, on a high level. Some tasks can be solved, no doubt by improvement of the organisation within the branch. At the same time the state subsidy is indispensable in order to promote both the technical and the research activities. State subsidy is also necessary to build up more advantageous conditions of sales like in some foreign countries (e.g. the Netherlands).

  • Economic analysis of forced tomato production with regard to the intensity of production
    15-21.
    Views:
    252

    We assessed the cost/income conditions of forced tomato production and return conditions of the growing technologies by investment-profitability analysis. Horticultural sectors generate significant added value and employ a large number of workers per unit area; however, these sectors cover only 4% of agricultural areas. Regarding the use of capital and labour, forced vegetables are the most intensive horticultures with several development potential and reserves to gain better quality and a more efficient farming. One of the most prominent forced cultures is table tomato produced under different types of forcing equipment in Hungary: traditional, low-height plastic tunnel; large-atmospheric, block-based plastic tunnels and various greenhouses. The prime goal of my thesis is to specify the economic efficiency of each type and to choose the most efficient one by the complex economic assessment of plastic tunnels, block-based plastic tunnels and greenhouses with the most advanced technologies. Results of the economic analysis suggest that the most efficient production method is the modern, Dutch greenhouse technology; however, this statement is not backed by every indicator: each type has its own advantages and disadvantages. Regarding the future, the installation of such types or even (in the technical sense) more modern growing technology may be considered as a prospect for capital intensive and larger businesses.

  • Dynamic economic analysis of greenhouse pepper production on rockwool on a family farm
    43-47.
    Views:
    121

    The major part of the pepper growing farms in Hungary operate as family enterprises with areas varying between 1,000 and 3,000 m2. As a result of the small size, their profitability is greatly dependant on the technological level and market circumstances. Most of these farms are characteristically affected by the lack of capital, therefore, they are unable to implement any further developments with their own forces. Greenhouse pepper production on rockwool had already been subjected to analysis earlier in our research, however, those calculations were directed solely at the profitability and efficiency of production. Based on the data from 2004 in 2005 yet another and more profound analysis was set as the objective. Besides the methods already applied before, several dynamic indicators have been introduced which could also be useful for practical applications. The graphs can permit growers to monitor the temporal distribution of the costs incurred and revenues earned during production. Thereby it is easier to plan the costs and more simple to distribute them more rationally over the production period. Our experiences suggest that this sort of analytical method is applicable only in cases where a very careful and precise collection of data is ensured and the results obtained can not be generalised as being valid only for the single farm analysed. Experiences and results, however, make us consider the dynamic economic analysis as being very useful both for beginners and practicing horticulturists.

  • Micropropagation of Rudbeckia hirta L. from seedling explants
    105-108
    Views:
    162

    We conducted experiments for developing an in vitro micropropagation protocol starting from meristems of Rudbeckia hirta L seedlings. We pre-soaked the seeds in sterile ion-exchanged water for 17 hours, and then achieved surface disinfection in two separate steps. First, we used concentrated household sodium-hypochloride solution for 20 minutes and, also for 20 minutes, we applied hydrogen peroxide of 10%, which was followed by washing with sterile ion-exchanged water three times. For the propagation of seedling meristems, the combination of half-strenght solid Murashige and Skoog (1962) culture medium containing 10 mg/1 of kinetin or 2 mg/I of kinetin + 0.1 mg/1 of 2iP proved to be the most suitable. The average number of shoot-buds developed from the seedling axillary meristem in the best culture media varied between 5 and 17. Without separating them, we inoculated the shoot-bud clusters on MS culture medium containing 2 mg/1 of IAA. After four weeks of incubation we obtained elongated shoots which we separated and inoculated into a new culture medium and we obtained elongated roots. The rooted plants were gradually acclimatised in the cultivation room, potted and carried to a greenhouse, and then planted in open field for subsequent observation. By adopting this method, our laboratory started the micropropagation of the superior and/or elite genotypes of the Rudbeckia hirta L. being of special value in respect of breeding.

  • Organic and mineral fertilizer effects on the yield and mineral contents of carrot (Daucus carota)
    69-74.
    Views:
    411

    A greenhouse pot experiment was conducted to investigate the effects of ammonium-nitrate, food waste compost, bacterial fertilizer (EM-1) and their combinations on production and nutrient contents of carrot. The study was conducted on a calcareous chernozem and acidic sandy soils in a randomized complete block design with 8 treatments and four replications. NH4NO3 in chernozem soil increased the weight of carrot leaves only, while in sandy soil resulted in reduced yield and highly increased NO3-N content of roots. Sandy soil showed higher response of biomass production to food waste compost application than chernozem soil. The highest carotenoid content of roots was measured with compost treatment. Combined application of compost and NH4NO3 in chernozem proved to be good combination but in sandy soil have turn out to be less favourable than sole compost treatment. Bacterial fertilizer (EM-1) did not cause marked effect on the yield parameters, but caused increased phosphorus content of plant. In chernozem soil the maximum yield parameters were achieved with the combined treatment of ammonium-nitrate+compost+EM-1. In sandy soil the most favourable treatment proved to be the compost treatment. Results suggest that application of food waste compost as a nutrient source could be a promising agrochemical practice especially in soils having low organic material and low nutrient supply.

  • Effect of hydroponic and peat-free media in transplant production of Rudbeckia hirta varieties under different photoperiodic lighting and their photosynthetic parameters
    110-117
    Views:
    366

    The purpose of this research was to determine the effects of varieties, different light conditions (short day, long day, natural short day with light pollution), and different growing media (perlite, peat-free, peat-based, aeroponics system) on Rudbeckia hirta plant production under controlled conditions (greenhouse). The morphological effects of each treatment (photoperiodic lightings and media) on different Rudbeckia varieties determined at 11 weeks-old ’Napfény’, ’Toto Gold’, ’Autumn Colors’, ’Prairie Sun’ and 16 weeks-old ’Napfény’. Plantlets received 12 hours daylight did not initiate flowers, remained stage of the leaf rosette in case of all varieties. The 14 hours light treatment in the aeroponics system and the same treatment in perlite and control (natural short day with 14 hours light pollution) plantlets had developed inflorescences or flower buds. The inflorescence axis of ‘Napfény’ was appeared at 13 weeks under long-day conditions, with 1.7 (perlite) - 2.7 (aeroponics) flower buds in 16 weeks. ’Toto Gold’, ’Autumn Colors’, ’Prairie Sun’ varieties developed inflorescences at 8 weeks, 14 hours aeroponics system resulted in the most of flower buds (’Toto Gold’: 6.5, ’Autumn Colors’: 3.25,’Prairie Sun’: 4.8 flower buds) at 11 weeks. Long daylight manipulation could be minimized crop times and achieved flowering potted plants at 11 weeks. The peat-based and peat-free media effect was observed on ‘Autumn Colors’. The number of leaves of peat-free ‘Autumn Colors’ transplants (16.8-20.3) was significantly higher than peat-based media (13.5-15.5). Other morphological parameters were not affected by the media treatments.

  • First selections of the Hungarian apple breeding program for multiple resistance
    9-13.
    Views:
    137

    The aim of the first Hungarian apple breeding program for multiple resistance started in the beginning of the nineties is to widen Hungarian apple assortment by good quality, resistant apple cultivars with excellent productivity and ecological capability to the most important fruit growing areas in Hungary. In the first years of seedling production we made early selection for susceptibility to apple scab in greenhouse. Alter this, field observation of susceptibility to powdery mildew, scab and canker and a yearly negative selection was carried on. From 1997, fruit quality was evaluated as well, and from 2001 the resistance of shoots to Erwinia ainylovora (Burrill/Winslow et al.) was examined using inoculations in greenhouse conditions. From the progenies of crosses in 1992 and 1993, six candidates were announced to national recognition out of hybrids examined for more than a decade. Descriptions of these selections from 'Prima' progenies and the most important data of their resistance, growing habit, morphological characteristics and fruit quality are shown in this article.

  • Effects of methyl jasmonate, salicylic acid and phenylalanine on aloe emodin and aloin in diploid and tetraploid Aloe barbadensis
    Views:
    187

    Aloe vera is one of the most famous medicinal plants. Aloin and aloe emodin are the most important active compounds in this plant. The purpose of this research was the comparison of aloin and aloe emodin production after the elicitation by methyl jasmonate, salicylic acid, and phenylalanine in diploid and tetraploid Aloe vera plants in greenhouse conditions. The plants were treated with the concentrations of 25, 50, and 100 µM. The amounts of aloin and aloe emodin were determined 24 and 48 hours after application of the treatment. HPLC analysis showed that the leaves of the control diploid plants (without applying elicitors) had more aloin (1.20 fold) and aloe emodin (1.14 fold) than the control tetraploid plants. The maximum concentration of aloin (1.15 ± 0.07 µg mg-1 dry weight) was obtained after the elicitation by 25 µM methyl jasmonate, 24 hours after treatment, in diploid plants) 6.36 fold compared to the control (0.18 µg mg-1 dry weight (. In addition, the maximum concentration of aloe emodin (0.28 µg mg-1 dry weight) was obtained after the elicitation by 25 µM salicylic acid, 24 hours after treatment, in diploid plants) 6.18 fold compared to the control (0.04 µg mg-1 dry weight)). The long-term effect of three studied elicitors (after 240 days) on plant health and survival was also studied. This investigation showed that only methyl jasmonate at a concentration of 100 µM was resulted in the death of Aloe vera plants.