Search

Published After
Published Before

Search Results

  • Microbiological and Chemical Investigation of Drinking Water Samples on the Operational Area of Pannon Víz Zrt.
    151-160
    Views:
    196

    In our research the potable water quality was monitored between 1 January 2015 and 31 October 2017 in the operational area of Pannon-Víz Zrt. The connection between temperature, microbiological load and chemical parameters were investigated. After evaluating data, the following results have been identified. The seasonal changes of the microbiologically positive samples are determined by the contamination caused by Escherichia coli, Enterococci and Pseudomonas aeruginosa. The coliform group and the 22°C and 37°C colony-form units showed no seasonal dynamics. The analysed chemical parameters were below the limit during the examined period. Based on the correlation analysis, there is no correlation between chemical and microbiological parameters.

  • Modernisation of FESTO MPS Station with Implementation into Cyber-Physical Space
    10-14
    Views:
    131

    In the course of our thesis we dealt with the implementation of a manufacturing cell. For this we used the FESTO MPS modules. The production cell is controlled by a PLC. We have not only implemented a unique layout and workflow), but also added new features to the system. This means using two control units, one of which is responsible for controlling the process, while the other is managing a web interface. On the web interface, you can see the warehouse containing the finished workpieces and order palettes assembled from different workpieces, or you can set the type and quantity of workpieces to be stored in the warehouse

  • Laboratory Testing of Rediffusion of Contaminants Using DKS-Permeameter
    41-48
    Views:
    116

    Decades long hydrocarbon contaminations effecting heterogenous groundwater systems is a common problem both in Hungary and worldwide. Only the treatment of aquifer layers is possible with remediation technologies, so the contaminations remained in the aquitards are released back to the treated porous layer  after the treatment due to the changes in concentration-gradient. This process is the so-called back-diffusion: as a result, the previously removed contaminations appear in the remediated layer again. In order to get better understanding of the rediffusion process and the influencing parameters series of measurements were carried out at the University of Miskolc Faculty of Earth Science and Engineering using a special laboratory device called DKS-permeameter. With the help of some small modifications it can be used for the modeling of backdiffusion. Artificially contaminated soil samples were built in the DKS-permeameter from which contaminanant release occured due to back-diffusion. The concentration values were determined with spectrophotometric measurements.

  • Consumer Perception of Electric Cars in Hungary – Theoretical Considerations and Empirical Results
    1-23
    Views:
    241

    Electric cars are becoming increasingly popular in the automotive industry and among consumers; partly as a result of their environmentally friendly characteristics. The aim of the study is to compare the main characteristics of electric and conventional cars in the context of environmental protection. In the first half of the study, we present the life cycle of electric and conventional cars and we compare the overall environmental impact traditional an electric vehicles. We point out that although the operation of an electric car does not pollute the environment locally, the manufacture, charging and disposal of batteries required for operation raises several issues related to environmental pollution. In the second part, we examine the respondents' attitudes towards electric cars based on our own questionnaire research. On the basis of the answers, it can be said that consumers still consider electric cars expensive and are aware that electric cars address some pollution issues to a small extent.

  • Tribological Behaviour Comparison of ABS Polymer Manufactured Using Turning and 3D Printing
    46-57
    Views:
    146

    Additive and subtractive manufacturing of Acrylonitrile Butadiene Styrene (ABS) were employed for fabricating samples. The Additive manufacturing was represented through 3D printing, whereas subtractive manufacturing carried out by Turning. Some developments have been applied for enhancing the performance of the 3D printer. Tribological measurements of the turned and 3D printed specimens have been achieved. Studying the difference between static and dynamic friction factors and the examination of wear values were included. A comparison of the tribological behaviour of the turned and 3D printed ABS polymer has been investigated.

Database Logos