Search
Search Results
-
Sport Consumption, Fan Engagement, Sport Statistics – Post-specific Passing Characteristics in Football
Views:607Digitalization and the explosive development of technology have led to significant changes in football. Due to the increasing amount of data available through various sensors and other data collections, we can observe the rise of data-centric, analytical and statistically oriented thinking in football, which is also of interest to fans. Digitalisation is also closely linked to sports consumption, which is why we have seen significant changes in this area in recent years. The pandemic has further amplified the speed of digital transformation in the sports industry. One of the most important contents for sports organizations and their fans is the in-depth sports statistics and analysis that enhances the consumer experience. In our study, we examined the most common performance indicator in football, passing. Our goal was to examine the position-specific pass characteristics in detail, therefore we also examined different pass properties in our research. As a model for our analysis, I chose the premier league, which has the highest UEFA coefficient. The three rounds (rounds 30-32) of the championship season 2019/2020 have been recorded and analyzed in terms of passes. there was a significant difference between the average number of passes per game between defensive and offensive players (t=7,988, p<0.05). There is also a gradual decrease in the number of passes attempted per match and the accuracy of the pass in the examination of the middle positions when examining the positions in the depth of the pitch. For both pass accuracy and average pass count, the decreasing ranking corresponds to the position of positions on the pitch (order: 1, central defender 2, defensive midfielder 3, inside midfielder 4, attacking midfielder 5, striker). In the value indicator of the position for passes, offensive positions performed more effectively than defensive positions. The extreme positions also stand out among the attacking positions, where in the case of the position value per pass number, 23.3% of the total test was completed and 14% of the amount of the established position value indicators was provided by these posts. Overall, our study points to post-specific pass characteristics and, knowing this, we can state that the comparison of players' passing performance is relevant if the players are in the same or related positions.
-
Research of titration curves of red mud samples
270-276Views:84The aluminium demand is increasing worldwide, so the amount of red mud, which produced during the production of aluminium, is constantly increasing, also. The researching of the economical processing of the byproduct has been under way for a long time, but the industrial implementation of recovery technology, that is suitable in all aspects, has not yet been realized. The use of by-products, in addition to reduce the risk of contamination of environmental elements, may be useful for the recovery of valuable metals, which contained therein.
-
Self-developed Controller System –based on Open-Source Applications
97-105Views:75In the University of Debrecen Building Mechatronics Research Centre faced by the application of building automation technology, are tackled by cutting edge research performed at the Research Centre. The embedded device system, the focus of the ongoing project at the Research Centre, is programmable, reconfigurable, and adjustable. The design of an efficient embedded system must meet regulatory requirements, for optimizing building energy efficiency. The system provides solutions for a range of industrial applications, and peaks the interest of building services providers (e.g. SMEs).
-
The Possible Job Creation and Job Destructive Effects of Technological Development
53-61Views:296Throughout history, technological change has often provided the basis for employee anxiety. Between 1811 and 1816, a group of workers in England who called themselves "Luddists" destroyed machines, because they thought it would endanger their workplace. 19th-century thinkers and economists such as Karl Marx and David Ricardo predicted that mechanizing the economy would ultimately worsen workers' conditions, depriving them of a decent wage. Over the last century, John M. Keynes (1930s) and Wassily Leontief (1950s) have expressed their fears that more and more workers will be replaced by machine solutions that will lead to unemployment. In recent years, Brynjolfsson and McAfee (2014) have argued that existing technologies reduce the demand for labor and put some of the human workforce at a permanent disadvantage. However, there are a number of compensation mechanisms that can offset the initial displacement effects of automation and process innovation in general (Vivarelli, 2015). First of all, while workers are being replaced in industries that introduce new machine technology, additional workers in new industries are needed. Second, automation (and process innovation in general) reduces average costs. Acemoglu and Restrepo (2017) found that this results, on the one hand, in the effect of price productivity (“priceproductivity”) (as production costs decrease, the industry can expand and increase labor demand); and, on the other hand, it leads to economies of scale in production (the reduction in costs due to automation leads to an increase in total output and increases the demand for labor in all industries). Similarly, Vivarelli (2015) argues that lower average costs can result in lower prices (if the industry's market structure is perfectly competitive), stimulate product demand, or result in extra profits (if the industry's structure is not perfectly competitive). If these extra profits are reinvested in the company, this investment can create new jobs. The presentation intends to present these counterbalancing cases and to provide real examples based on the literature.
-
The Impact of Gas Flaring On Man and His Environment and the Way Out
82-90Views:131The nature of flaring processes has created a severe impact on man and the environment. Massive environmental degradation as a result of flaring activities has led to fluctuations in climate as well as depletion of the vegetation cover through acid rain. Findings have been made on some harmful gases released into the atmosphere that have effects on the environment and also on man. In order to control these effects by ensuring a clean atmosphere and environment, a new flaring model (DanMat flaring model) has been suggested. The model uses smoldering mechanism to reduce the amount of heat released into the atmosphere during conventional flaring by 60%. It also uses scavengers to oxidize harmful gas produced during flaring activities into less harmful ones. With this model one can flare gas without polluting the environment since it reduces the emissions of harmful gases during flaring.
-
Y Generation and the Job Seeking
490-501Views:1239Generations Y and their expectations have caused many surprises for employers. They are different compared to their predecessors. Millennials were born in socialism in our country, but they did not experience from it so much, because they grew up in democracy. Their main feature is that they are openminded to opportunities, and they learn quickly modern technology innovations. They have a strong self-conscious, and are highly proactive. They prefer forms of atypical work, because they can carry out their work anywhere in the world due to the internet access. It is very important for them to keep the work - life balance. These properties have overwritten the conventional management methods, such as conventional recruiting techniques. This paper examines the main job seeking features of the Generation Y based on an empirical research.
-
Efficient removal of salts from the residual dross of aluminium melting
259-269Views:107A residual dross of high quantity and high salt content arises from the hot (thermo-mechanical) treatment of the primary dross generated by the production of aluminium alloys from scrap. It contains a relatively low concentration of metal (5 – 10 %) but a high amount (30 - %) of chloride salts and some other components beside the oxide matrix. Due to the components dissolved in or reacted with water, this industrial residue - arising in thousands of tons also in Hungary – qualifies as hazardous and causes a real burden to the environment. According to the laboratory experiments aimed at an economical technology, the chlorides are dissolved within a few minutes when a liquid/solid ratio of 1:1 cm3/g (water volume:sample mass) is assured with an intensity of the horizontal shaking to prevent sedimentation. However, the filling ratio of the vessel also appears to have an effect. An implementation of relatively low cost would allow the recycling of the salt and the application of the final residue for alternative purposes.
-
The Measurement of The Three Components of The Cutting Force During The Turning Process
139-146Views:95We carried out the measurement of the three components of the cutting force as a function of the modification of the depth of cut during the longitudinal turning process. The results show that if we increase the depth of cut, all three components of the cutting force shows increasing tendency, regardless of how much the cutting speed and feed speed were performed during the measurements [1] [2] [3] [4].
-
Combustors with Low Emission Levels for Aero Gas Turbine Engines
503-514Views:308The aircrafts are responsible for emitting several types of pollutants, especially the pollutants in the form of NOX, CO2, CO, UHC, SOX and Particulate Matter PM (smoke/soot). The impact of aviation emissions on the global is well known, where these emissions modify the chemical and microphysical properties of the atmosphere resulting in changes of earth’s climate system, which can ultimate in critical changes in our planet fragile ecosystem, also the pollutants produced by aircraft engines cause many health problems. This is why the International Civil Aviation Organisation (ICAO) is seriously seeking to control the emission levels by issuing new standards during the successive meetings of the Committee on Aviation Environmental Protection CAEP (CAEP/01 in 1986, CAEP/2, CAEP/4, CAEP/6, CAEP/8, etc). The new regulations include more stringent standards aimed to reduce emission levels, this led to increased interest in low emission technologies. In this paper, a comprehensive review of low emissions combustion technologies for modern aero gas turbines is represented. The current low emission technologies include the high Technologies Readiness Level (TRL) including RQL, TAPS, DAC and LDI. Also, there are advanced technologies at lower TRL including LPP, ASC and VGC.
-
Analysing the Possible Connection Between Dark Triad Personality Traits and Ethical Attitudes of University Students
57-67Views:303In our paper we examined the possible connection between the Dark Triad personality traits and ethical attitudes among university students. The analysis of both topics has become the focus of interest in the past decades. Researchers consider the impact of many factors in the background of ethical attitudes and behavior. Among other things, personality is also a potential factor. The Dark Triad personality means the coexistence of the socially undesirable narcissism, Machiavellianism and psychopathy. Such people are characterized by self-love, aggression, the lack of guilt or conscience, so they are less likely to have ethical attitudes. In our research, this connection was examined by a questionnaire survey conducted among first year students of University of Debrecen Faculty of Natural Sciences and Technology and Faculty of Economics and Business. Respondents completed the validated Dirty Dozen questionnaire which was developed to measure Dark Triad personality and a questionnaire adapted from Lozier's research in which respondents were asked to evaluate school situations whether they are ethical or unethical and to what extent they are unethical. In our research, we were looking for significant relationships between the strength of the Dark Triad characteristics and the ethical judgment of situations. We also analyzed the differences between men and women and students of the two faculties.
-
Connection Between Human Excreta and Global Warming
139-154Views:180Our study would like to draw attention to an insufficiently investigated question: how human excreta and its different treatment methods are related to climate change. Human excreta is part of the biological cycle. Its CO2 content gets released to the atmosphere to some degree according to the treatment methods used. 40 55% of faeces’ and 11-17% of urine’s dry matter content is carbon (in the form of organic compounds). According to this, approximately 21-57 g/person carbon bound in organic compounds is produced daily, which means an emission of 58-183 million tons of carbon in the world annually in the form of human excreta. The environmental load of the widely spread flush toilet based water infrastructure is significant. However, neither the degree of CO2 emission caused by collection and treatment of waste water, nor wasting of organic and nutrient content of excreta are properly studied. Our study highlights the emission of CO2 caused by the energy demand of sewage water collection and treatment, by the oxidation of organic compounds of human excreta and by burning of methane produced as a result of anaerobic treatment of waste water sludge. Finally the possibility of utilization of human excreta by direct composting is presented, which technology has not significantly spread in the world yet.
-
Topology optimization and rim design
92-101Views:250A goal of this article is to show the development of the car wheel rims along with the progress of the manufacturing technologies over the past few years. To achieve this goal, topology optimization and generative design usage have been reviewed in this work. The research has focused on the main factors, which affect the life of car wheel rim, and it has shed the light on the effect of the topology optimization and the generative design on the manufacturing of the car wheel rims. Since the main factors above-mentioned are the: forces, material preferences and topology optimization, the study has covered the results of the studies made on each part along with the technology progress. Moreover, the article has explained the methodology main steps of the topology optimization and the generative design and their principles.
-
Development of a Small-Scale Plastic Recycling Technology and a Special Filament Product for 3D Printing
365-371Views:255In our days, the fight against pollution has become a real challenge for the state. recycling is one of the solutions that is adopted in several nations to reduce the rate of plastic discarded in nature. The amount of plastic waste has been increasing for decades contributing to the environmental pollution that is one of the most serious problem of the mankind. according to the statistics not only the household plastic waste, but the industry discharge is increasing because the utilization of plastic as a raw material is more and more extending. plastic can be found in a lot of products, huge number of bottles, plastic bags, computers, auto parts are sold every day. The current applications for using recycled plastics in fabrication and design are fairly limited, on a small scale, plastics (such as abs, HDPe1, or Pe2t) are shredded and formed into pellets, and then either extruded into lament to be used in existing 3d printers, or injection molded into small parts and pieces of larger components. at a large scale, recycled HDpE is melted into sheets and either used directly as sheets in construction, or then heat formed from a sheet into components for construction. these methods of fabrication using recycled plastics are the norm because of their straightforward processes. nevertheless, each method leaves some complexity to be desired. This paper we study the types of plastics and diagnose the pollution caused by the latter. this allowed us to design and size a recycling station of plastic into filaments for three-dimensional printers. this station which will contribute to the fight against pollution. the station consists of two machines for grinding of the plastic and the other for the extrusion of the desired filaments. we were able to make a theoretical academic study on both machines and also we designed with solidworks 2015. The theoretical study is spread of the mechanical calculations necessary to the design and validation of the structure using the tools. as the prospect of this project, we want to complete the achievement of this station while completing the crusher and extruder mechanically. then switch to electric and electronic parts (introduction of engines, sensors and wiring...). In the case of waste plastics that are recyclable and reusable. the most widely used are polyethylene terephthalate (pet, used for synthetic fibers and water bottles), and second high-density polyethylene (hdpe, used for jugs, bottle caps, water pipes).
-
Efficiency Analysis of Production Management System
401-415Views:188Due to the continuously evolving technology, even more escalating market competition has emerged between the companies. This competition is not only about the logistics related processes, it also appears to be significant for the production since the manufacturing companies form the center of global sale streams and without them the items found in logistical processes cannot be created. The role of production’s optimization and efficiency in the supply chain continuously grows since this is the part where a company’s most cost is produced. Our research objective was the examination of a company that applies various manufacturing, assembly technologies, and the used tools and softwares for this purpose were the SAP Business One ERP system and it’s add-on, called PPS One, the latter originated in Switzerland. We used these softwares to provide solutions to companies, especially to those that are dealing with manufacturing and production, for the optimization of their workflows, operations, supervising and controlling of their material. We also monitored from production technology’s elements the capacity planning, production orders, schedules, production tracking and cost accounting. We have made proposals during the analysis that might improve the company's strategy, competitiveness and increase it’s efficiency in business, and at the same time they can facilitate the company's pricing and inventory management activities.
-
The green methanol - playing a role in sustainable energy management
249-258Views:140Global energy demand is constantly increasing, so the energy sources we use, and the efficiency of energy use are of paramount importance for the future of humanity. Methanol can play a key role in the sustainable use of natural resources, in the efficient and smooth transition from a fossil oil-based energy system as well as in reducing greenhouse gas emissions. Long-term thinking will result in an increase in the use of renewable energy sources, which will favour the spread of green methanol technology and thus the use of a carbon-neutral fuel. The raw materials for the production of green methanol may include municipal solid waste, agricultural waste, renewable hydrogen and carbon dioxide and the methanol has many uses, both as fuel and chemical feedstock. It also provides an opportunity to chemically store excess renewable energy from intermittent sources, thereby reducing dependence on fossil fuels. The price of electricity used for electrolysis is the main determinant of the economical production of green methanol, so the reduction of the cost of solar and wind energy greatly contributes to the competitiveness of carbon-based production.
-
Solutions of Warehouse Technology in Connection with Management Decisions
1-10Views:129The aim of the study is to analyse the effect of management decisions on space utilization of warehouses through two companies’ example. The only way to make good decisions is to take into consideration the possible effects of changes. One of the tire manufacturing companies managed to improve space utilization, caused not only time but cost reduction. On the contrary, a bad decision of a household chemical factory induced enormous problems in the material flow.
-
Requirements for Multicultural Competencies Defined by a Focus Group
44-56Views:178Globalization, the spread of multinational companies and the enormous development of information technology can lead to a new trend in employers’ requirements. However, being employed by an international company is a real possibility for any employee in any part of the world. Even if they do not have to work abroad, employees may have to function in a multinational environment in their home countries. A favourable combination of intercultural competencies is a key factor in the selection and development of employees. A possible way of measuring these competencies can be the Multicultural Personality Questionnaire (MPQ). First of all,on the employers’ part, it is important to clarify the exact requirements and competencies (dimensions) to be able to draw up an ‘ideal profile’. We prepared two versions of the MPQ (91-item; 5-dimensional) and used them to test employers’ requirements in the selection process regarding the dimensions of cultural empathy, open-mindedness, social initiative, emotional stability and flexibility. This study describes the results of a focus group interview, which took place in 2017, revealing the importance of multicultural competencies from the employers’ point of view and examining the conditions of the adaptability of the two questionnaires. We used the focus group method to find out in what conditions the questionnaires canbe used in a selection process. What possibilities and limits are therefor using the direct five-dimensional questionnaire? What aspects do we need to take into consideration in expressing and interpreting the requirements in the results of the test?
-
Challenges of the Quality- and Change Management in the Context of Upcoming Social-Industrial Changes (5.0) – Conclusion of a Survey
138-150Views:141The upcoming industrial-social revolution, which may be called the 5.0, is emphasizing the coordination of the value-creating work of technology (machine) and man. This approach wishes to move towards sustainability, which deserves a significant role in nowadays through the world empathizing the negative effects of the wolrd. During my research I was looking for the answer that how the extended industry 4.0 and its tone be in Hungary via supply chain of the automotive industry. During my research I was looking for the answer that how the extended industry 4.0 be in Hungary and its tune through supply chain of the automotive industry. I also have examined that which changes are justified regarding management systems in interest of efficiency and emphasizing the human capital by leaders interviewed. As a part of qualitative research in-depth expert interviews were interpreted with help of content analysis based on the methodology of grounded theory. The results demonstrate the need to review and change existing processes in order to ensure that the potential of human capital is not lost and that technological development, even more so, is at the service of human resources in order to achieve its efficiency and effectiveness. Among the possible tools we can find the re-structurizing changes of post tracking processes of the audits in management systems providing quality. Furthermore, the practical implementation of multifactorial statistical process control in the evaluation of processed data, which may be one of the essences of industrial (IoT) data.
-
Application of Additive Technology in Precision Casting
43-56Views:180In this paper the surface of the prepared test specimens had been examined with light microscopy and surface roughness measurements. In order to improve the surface smoothness of PLA specimens, application of ethyl acetate was required. After this surface treatment, microscopic images were taken again. The melting and decomposition temperatures of the materials had been determined using derivatography. The chosen method was precision casting with gypsum molding. Also, the plaster molds had been burnt out according to the predefined melting and firing diagram. The measurement series shows that the samples produced by 3D printing can also be used in the field of precision casting. They provide greater freedom of design, more sophisticated pieces, and prototypes can be finished in a shorter amount of time.
-
The Possibilities of Additive Manufacturing in Medical Use
246-253Views:93Additive Manufacturing has been invented in 1981 at the University of Texas, and to this day it has grown to be the most versatile and promising manufacturing technology in the market, both the industry and health care system has noticed this. Additive Bio-Manufacturing (ABM) techniques, which can be used in health care, are highly in demand, and researches have been going on to make these technologies safer and even more versatile. For more utilization and versatility, special attention is required to develop new materials which can help in increasing the service life, bioactivity, cell growth along with the desired mechanical properties, and to find the right manufacturing parameters for creating optimal products. The aim of this review is to present the available main Additive Manufacturing technologies, and particularly the biomedical usability of Additive Manufacturing.
-
Building’s Constructions and Structures. Part I. The Classification of Buildings by Supporting Structures
56-78Views:325In the paper we deal with the structures interpreted among the buildings constructions. In the present, first part we classify the buildings constructions by their functions. Two main groups can be formed. Analysing supporting construction group can be shown that the building can be well classify by supporting constructions. The classification based on vertical supporting constructions like wall and column gives fourelement classification: wall frame, column frame, mixed frame and frame without vertical supporting constructions. This classification is very simple. Take into consideration of the buildings technology of walls and columns there can be given a classification whit more elements. Different subgroups can be interpreted using connections of walls and columns with floor construction in the certain groups.
-
Security and Risk management of Intelligent Integrated Institutes
74-84Views:72The intelligent households are getting more and more popular beside the intelligent technologies. With all the advantages that this can provide, it brings the security risk of the information technology as well. We must deal with those dangers. We have to determine the risks so that we can make proper precautions. This article gives an effective guideline to achieve safety.
-
Engineering Spatial Ability and Spatial Geometry – Research Experiences 1.
383-387Views:88Spatial visualization skills have an important role in teaching and learning of engineering studies. Many studies have shown that there are correlations between various measures of spatial skills and performance in particular Science, Technology, Engineering and Mathematics (STEM). Many engineering students have problems with imagining a spatial figure and therefore to solve the spatial geometry exercises, so development of spatial ability is very important. We have developed special tools and worksheets for development of spatial abilities
-
Parametric Programming Applied to the Optimal Production Structure in Determining
375-389Views:105The agricultural planning often the question arises, how the different input (fertilizer, feed, irrigation, etc) from what to use on a production (land, animals) unit basis, and to what intensity. The input transformational efficiency experiments by setting analysis and evaluation. For example examined the nutrient replenishers fertilization experiments, the effect of nutritional values of the feed on the body weight gain, milk production in animal experiments. The input input efficiency to the external environment (weather, soil conditions, unexpected events), the technology used and the biological factors both influence. The farmer must be chosen in each sector, taking into account the magnitude of these inputs and environmental requirements. The economic optimum is usually trying to approach the sectoral level, which serves as the basis for future planning data. The mathematical programming models using relatively simply and quickly determine the optimal production structure. The models provide the specific resource requirements for, and the limitations of the objective function coefficients are calculated on the basis of sectoral. This becomes a deterministic model, and we can get the appropriate sectoral analyzes outstanding results of production structures. Therefore the relationships within sectors directly incorporate mathematical programming model and corporate interests placed above the interests of the industry to determine the intensity of the sectoral inputs. in their article a fertiliser application example, we present the production structure and the plant production sector fertiliser input of a time optimization, in which the fertilizer for specified sectoral relationships appear in the model objective function.
-
Dependence of the Passive Force Fp From the Revolutions, back Engagement of Cutting Edge Ae, Working Engagement of the Cutting Edge Ap During Milling
72-79Views:145In this contribution is analysed the force component of final force (passive force) by peripheral milling operation. Therefore, the main parameters that had influence to independent variable were revolutions, back engagement of a cutting edge ae, working engagement of the cutting edge ap. The article deals with the issue of milling in material AlMgSi0.5 (aluminium alloy). Specifically evaluates the force component with respect to change of revolutions (4000/min., 5000/min., 6000/min.), working engagement of the cutting edge ap (1 mm, 2 mm, 3 mm) and back engagement of a cutting edge ae (5 mm, 10 mm, 15 mm). The Alfaflex process fluid with 7% concentration was supplied in an amount of about cca 10 l/min.
